A neuro-simulated annealing approach to the inverse kinematics solution of redundant robotic manipulators

The neural-network-based inverse kinematics solution is one of the recent topics in the robotics because of the fact that many traditional inverse kinematics problem solutions such as geometric, iterative and algebraic are inadequate for redundant robots. However, since the neural networks work with an acceptable error, the error at the end of inverse kinematics learning should be minimized. In this study, simulated annealing (SA) algorithm was used together with the neural-network-based inverse kinematics problem solution robots to minimize the error at the end effector. The solution method is applied to Stanford and Puma 560 six-joint robot models to show the efficiency. The proposed algorithm combines the characteristics of neural network and an optimization technique to obtain the best solution for the critical robotic applications. Three Elman neural networks were trained using separate training sets and different parameters, since one of them can give better results than the others can. The best result is selected within three neural network results by computing the end effector error via direct kinematics equation of the robotic manipulator. The decimal part of the neural network result was improved up to 10 digits using simulated annealing algorithm. The obtained best solution is given to the simulated annealing algorithm to find the best-fitting 10 digits for the decimal part of the solution. The end effector error was reduced significantly.     

A neural-network committee machine approach to the inverse kinematics problem solution of robotic manipulators

In robotics, inverse kinematics problem solution is a fundamental problem in robotics. Many traditional inverse kinematics problem solutions, such as the geometric, iterative, and algebraic approaches, are inadequate for redundant robots. Recently, much attention has been focused on a neural-network-based inverse kinematics problem solution in robotics. However, the result obtained from the neural network requires to be improved for some sensitive tasks. In this paper, a neural-network committee machine (NNCM) was designed to solve the inverse kinematics of a 6-DOF redundant robotic manipulator to improve the precision of the solution. Ten neural networks (NN) were designed to obtain a committee machine to solve the inverse kinematics problem using separately prepared data set since a neural network can give better result than other ones. The data sets for the neural-network training were prepared using prepared simulation software including robot kinematics model. The solution of each neural network was evaluated using direct kinematics equation of the robot to select the best one. As a result, the committee machine implementation increased the performance of the learning.     

A study of neural network based inverse kinematics solution for a three-joint robot

A neural network based inverse kinematics solution of a robotic manipulator is presented in this paper. Inverse kinematics problem is generally more complex for robotic manipulators. Many traditional solutions such as geometric, iterative and algebraic are inadequate if the joint structure of the manipulator is more complex. In this study, a three-joint robotic manipulator simulation software, developed in our previous studies, is used. Firstly, we have generated many initial and final points in the work volume of the robotic manipulator by using cubic trajectory planning. Then, all of the angles according to the real-world coordinates (x, y, z) are recorded in a file named as training set of neural network. Lastly, we have used a designed neural network to solve the inverse kinematics problem. The designed neural network has given the correct angles according to the given (x, y, z) cartesian coordinates. The online working feature of neural network makes it very successful and popular in this solution.     

Neural networks and the inverse kinematics problem

Inverse kinematics is a fundamental problem in robotics. Past solutions for this problem have been realized through the use of various algebraic or algorithmic procedures. In this paper the use of feedforward neural networks to solve the inverse kinematics problem is examined for three different cases. A closed kinematic linkage is used for mapping input joint angles to output joint angles. A three-degree-of-freedom manipulator in 3D space is used to test mappings from both cartesian and spherical coordinates to manipulator joint coordinates. A majority of the results have average errors which fall below 1% of the robot workspace. The accuracy indicates that neural networks are an alternate method for performing the inverse kinematics estimation, thus introducing the fault-tolerant and high-speed advantages of neural networks to the inverse kinematics problem.This paper also shows the use of a new technique which reduces neural network mapping errors with the use of error compensation networks. The results of the work are put in perspective with a survey of current applications of neural networks in robotics.     

Comparison of RBF and MLP neural networks to solve inverse kinematic problem for 6R serial robot by a fusion approach

In this paper, a fusion approach to determine inverse kinematics solutions of a six degree of freedom serial robot is proposed. The proposed approach makes use of radial basis function neural network for prediction of incremental joint angles which in turn are transformed into absolute joint angles with the assistance of forward kinematics relations. In this approach, forward kinematics relations of robot are used to obtain the data for training of neural network as well to estimate the deviation of predicted inverse kinematics solution from the desired solution. The effectiveness of the fusion process is shown by comparing the inverse kinematics solutions obtained for an end-effector of industrial robot moving along a specified path with the solutions obtained from conventional neural network approaches as well as iterative technique. The prominent features of the fusion process include the accurate prediction of inverse kinematics solutions with less computational time apart from the generation of training data for neural network with forward kinematics relations of the robot.     

An adaptive-learning algorithm to solve the inverse kinematics problem of a 6 D.O.F serial robot manipulator

An adoptive learning strategy using an artificial neural network ANN has been proposed here to control the motion of a 6 D.O.F manipulator robot and to overcome the inverse kinematics problem, which are mainly singularities and uncertainties in arm configurations. In this approach a network have been trained to learn a desired set of joint angles positions from a given set of end effector positions, experimental results has shown an excellent mapping over the working area of the robot, to validate the ability of the designed network to make prediction and well generalization for any set of data, a new training using different data set has been performed using the same network, experimental results has shown a good generalization for the new data sets.The proposed control technique does not require any prior knowledge of the kinematics model of the system being controlled, the basic idea of this concept is the use of the ANN to learn the characteristics of the robot system rather than to specify explicit robot system model. Any modification in the physical set-up of the robot such as the addition of a new tool would only require training for a new path without the need for any major system software modification, which is a significant advantage of using neural network technology.     

Visual motor control of a 7 DOF robot manipulator using a fuzzy SOM network

A fuzzy self-organizing map (SOM) network is proposed in this paper for visual motor control of a 7 degrees of freedom (DOF) robot manipulator. The inverse kinematic map from the image plane to joint angle space of a redundant manipulator is highly nonlinear and ill-posed in the sense that a typical end-effector position is associated with several joint angle vectors. In the proposed approach, the robot workspace in image plane is discretized into a number of fuzzy regions whose center locations and fuzzy membership values are determined using a Fuzzy C-Mean (FCM) clustering algorithm. SOM network then learns the inverse kinematics by on-line by associating a local linear map for each cluster. A novel learning algorithm has been proposed to make the robot manipulator to reach a target position. Any arbitrary level of accuracy can be achieved with a number of fine movements of the manipulator tip. These fine movements depend on the error between the target position and the current manipulator position. In particular, the fuzzy model is found to be better as compared to Kohonen self-organizing map (KSOM) based learning scheme proposed for visual motor control. Like existing KSOM learning schemes, the proposed scheme leads to a unique inverse kinematic solution even for a redundant manipulator. The proposed algorithms have been successfully implemented in real-time on a 7 DOF PowerCube robot manipulator, and results are found to concur with the theoretical findings.     

A neuro-genetic-simulated annealing approach to the inverse kinematics solution of robots: a simulation based study

In this study, a hybrid intelligent solution system including neural networks, genetic algorithms and simulated annealing has been proposed for the inverse kinematics solution of robotic manipulators. The main purpose of the proposed system is to decrease the end effector error of a neural network based inverse kinematics solution. In the designed hybrid intelligent system, simulated annealing algorithm has been used as a genetic operator to decrease the process time of the genetic algorithm to find the optimum solution. Obtained best solution from the neural network has been included in the initial solution of genetic algorithm with randomly produced solutions. The end effector error has been reduced micrometer levels after the implementation of the hybrid intelligent solution system.     

Robot arm reaching through neural inversions and reinforcement learning

We present a neural method that computes the inverse kinematics of any kind of robot manipulators, both redundant and non-redundant. Inverse kinematics solutions are obtained through the inversion of a neural network that has been previously trained to approximate the manipulator forward kinematics. The inversion provides difference vectors in the joint space from difference vectors in the workspace. Our differential inverse kinematics (DIV) approach can be viewed as a neural network implementation of the Jacobian transpose method for arm kinematic control that does not require previous knowledge of the arm forward kinematics. Redundancy can be exploited to obtain a special inverse kinematic solution that meets a particular constraint (e.g. joint limit avoidance) by inverting an additional neural network The usefulness of our DIV approach is further illustrated with sensor-based multilink manipulators that learn collision-free reaching motions in unknown environments. For this task, the neural controller has two modules: a reinforcement-based action generator (AG) and a DIV module that computes goal vectors in the joint space. The actions given by the AG are interpreted with regard to those goal vectors.     

An improved approach to the solution of inverse kinematics problems for robot manipulators

A structured artificial neural-network (ANN) approach has been proposed here to control the motion of a robot manipulator. Many neural-network models use threshold units with sigmoid transfer functions and gradient descent-type learning rules. The learning equations used are those of the backpropagation algorithm. In this work, the solution of the kinematics of a six-degrees-of-freedom robot manipulator is implemented by using ANN. Work has been undertaken to find the best ANN configurations for this problem. Both the placement and orientation angles of a robot manipulator are used to fin the inverse kinematics solutions.     

A Lagrangian network for kinematic control of redundant robotmanipulators

A recurrent neural network, called the Lagrangian network, is presented for the kinematic control of redundant robot manipulators. The optimal redundancy resolution is determined by the Lagrangian network through real-time solution to the inverse kinematics problem formulated as a quadratic optimization problem. While the signal for a desired velocity of the end-effector is fed into the inputs of the Lagrangian network, it generates the joint velocity vector of the manipulator in its outputs along with the associated Lagrange multipliers. The proposed Lagrangian network is shown to be capable of asymptotic tracking for the motion control of kinematically redundant manipulators.     

Kinematic analysis of a novel 3-DOF actuation redundant parallel manipulator using artificial intelligence approach

Kinematic analysis is one of the key issues in the research domain of parallel kinematic manipulators. It includes inverse kinematics and forward kinematics. Contrary to a serial manipulator, the inverse kinematics of a parallel manipulator is usually simple and straightforward. However, forward kinematic mapping of a parallel manipulator involves highly coupled nonlinear equations. Therefore, it is more difficult to solve the forward kinematics problem of parallel robots. In this paper, a novel three degrees-of-freedom (DOFs) actuation redundant parallel manipulator is introduced. Different intelligent approaches, which include the Multilayer Perceptron (MLP) neural network, Radial Basis Functions (RBF) neural network, and Support Vector Machine (SVM), are applied to investigate the forward kinematic problem of the robot. Simulation is conducted and the accuracy of the models set up by the different methods is compared in detail. The advantages and the disadvantages of each method are analyzed. It is concluded that ν-SVM with a linear kernel function has the best performance to estimate the forward kinematic mapping of a parallel manipulator.     

基于ANFIS的机械手运动学逆解的求取

提出一种基于自适应神经模糊推理系统（ANFIS）求取机械手运动学逆解的方法。本文以SCARA（Selective Compliance Assembly Robot Arm）型四自由度机械手为研究对象,研究SCARA机械手末端执行器笛卡儿空间坐标与机械手关节空间关节变量之间的对应关系。首先根据笛卡儿运动轨迹选取起点、终点和中间点,并求得与之对应的关节变量值序列。然后利用插值方法求得关节空间的角度变化曲线,最后在关节曲线上随机选取样本点,进而利用得到的数据训练并验证自适应神经模糊推理系统求解逆解的正确性和精确性。与传统基于BP神经网络求取运动学逆解的方法进行仿真对比分析,结果表明ANFIS在运动学逆解的求取精度和运算时间上均优于BP神经网络。     

A Dual Neural Network for Kinematic Control of Redundant Manipulators Using Input Pattern Switching

This paper presents a dual neural network for kinematic control of a seven degrees of freedom robot manipulator. The first network is a static multilayer perceptron with two hidden layers which is trained to mimic the Jacobian of a seven DOF manipulator. The second network is a recurrent neural network which is used for determining the inverse kinematics solutions of the manipulator; The redundancy is used to minimize the joint velocities in the least squares sense. Simulation results show relatively good comparison between the outputs of the actual Jacobian matrix and multilayer neural network. The first network maps motions of the seven joints of the manipulator into 42 elements of the Jacobian matrix, with surprisingly smaller computations than the actual trigonometric function evaluations. A new technique, input-pattern-switching, is presented which improves the global training of the static network. The recurrent network was designed to work with the neural network approximation of the Jacobian matrix instead of the actual Jacobian. The combination of these two networks has resulted in a time-efficient procedure for kinematic control of robot manipulators which avoids most of the complexity present in the classical-trigonometric-based methods. Also, by electronic implementation of the networks, kinematic solutions can be obtained in a very timely manner (few nanoseconds).     

An improved hybrid method for forward kinematics analysis of parallel robots

This paper combines a new structure of artificial neural networks (ANNs) with a 3rd-order numerical algorithm and proposes an improved hybrid method for solving forward kinematics problem (FKP) of parallel manipulators. In this method, an approximate solution of the FKP is first generated by the neural network. This solution is next considered as an initial guess for the 3rd-order numerical technique which solves the nonlinear forward kinematics equations and obtains the answer with a desired level of accuracy. To speed up the method, a new structure is proposed for designing the ANN which is called Same Class One Network. In this structure, the outputs of the ANN are classified into classes of similar variables with an individual network designed for each class. The proposed method is then applied to a planar 3-RPR parallel manipulator and a spatial 3-PSP parallel robot. The results show that using this method will lead to a 55% reduction in required iterations and a 20% reduction in the FKP analysis time, while maintaining a high level of solution accuracy.     

Cartesian path generation of robot manipulators using continuous genetic algorithms

In this paper, the authors describe a novel technique based on continuous genetic algorithms (CGAs) to solve the path generation problem for robot manipulators. We consider the following scenario: given the desired Cartesian path of the end-effector of the manipulator in a free-of-obstacles workspace, off-line smooth geometric paths in the joint space of the manipulator are obtained. The inverse kinematics problem is formulated as an optimization problem based on the concept of the minimization of the accumulative path deviation and is then solved using CGAs where smooth curves are used for representing the required geometric paths in the joint space through out the evolution process. In general, CGA uses smooth operators and avoids sharp jumps in the parameter values. This novel approach possesses several distinct advantages: first, it can be applied to any general serial manipulator with positional degrees of freedom that might not have any derived closed-form solution for its inverse kinematics. Second, to the authors’ knowledge, it is the first singularity-free path generation algorithm that can be applied at the path update rate of the manipulator. Third, extremely high accuracy can be achieved along the generated path almost similar to analytical solutions, if available. Fourth, the proposed approach can be adopted to any general serial manipulator including both nonredundant and redundant systems. Fifth, when applied on parallel computers, the real time implementation is possible due to the implicit parallel nature of genetic algorithms. The generality and efficiency of the proposed algorithm are demonstrated through simulations that include 2R and 3R planar manipulators, PUMA manipulator, and a general 6R serial manipulator.     

Learning Control of Robot Manipulators in Task Space

Two important properties of industrial tasks performed by robot manipulators, namely, periodicity (i.e., repetitive nature) of the task and the need for the task to be performed by the end‐effector, motivated this work. Not being able to utilize the robot manipulator dynamics due to uncertainties complicated the control design. In a seemingly novel departure from the existing works in the literature, the tracking problem is formulated in the task space and the control input torque is aimed to decrease the task space tracking error directly without making use of inverse kinematics at the position level. A repetitive learning controller is designed which “learns” the overall uncertainties in the robot manipulator dynamics. The stability of the closed‐loop system and asymptotic end‐effector tracking of a periodic desired trajectory are guaranteed via Lyapunov based analysis methods. Experiments performed on an in‐house developed robot manipulator are presented to illustrate the performance and viability of the proposed controller.     

基于三步法的机械臂轨迹跟踪控制

考虑机械臂末端轨迹跟踪控制问题,以跟踪逆运动学求解出的末端期望轨迹对应的各关节期望角度为控制目标.设计了一种基于三步法的控制器,该控制器由类稳态控制、可变参考前馈控制和误差反馈控制3部分组成.证明了该控制器可以通过控制机械臂的各关节力矩实现各关节实际角度对期望角度的状态跟踪,进而使得末端轨迹渐近跟踪期望轨迹,并且跟踪误差是输入到状态稳定的.仿真表明基于三步法控制器的空间机械臂末端可以渐近跟踪期望轨迹,并且该算法可以克服系统的末端负载质量变化等不确定性的影响.     

Visual Motor Control of a 7 DOF Robot Manipulator Using Function Decomposition and Sub-Clustering in Configuration Space

This paper deals with real-time implementation of visual-motor control of a 7 degree of freedom (DOF) robot manipulator using self-organized map (SOM) based learning approach. The robot manipulator considered here is a 7 DOF PowerCube manipulator from Amtec Robotics. The primary objective is to reach a target point in the task space using only a single step movement from any arbitrary initial configuration of the robot manipulator. A new clustering algorithm using Kohonen SOM lattice has been proposed that maintains the fidelity of training data. Two different approaches have been proposed to find an inverse kinematic solution without using any orientation feedback. In the first approach, the inverse Jacobian matrices are learnt from the training data using function decomposition. It is shown that function decomposition leads to significant improvement in accuracy of inverse kinematic solution. In the second approach, a concept called sub-clustering in configuration space is suggested to provide multiple solutions for the inverse kinematic problem. Redundancy is resolved at position level using several criteria. A redundant manipulator is dexterous owing to the availability of multiple configurations for a given end-effector position. However, existing visual motor coordination schemes provide only one inverse kinematic solution for every target position even when the manipulator is kinematically redundant. Thus, the second approach provides a learning architecture that can capture redundancy from the training data. The training data are generated using explicit kinematic model of the combined robot manipulator and camera configuration. The training is carried out off-line and the trained network is used on-line to compute the joint angle vector to reach a target position in a single step only. The accuracy attained is better than the current state of art.     

Computer generation of symbolic kinematics for robot manipulators

Computer generation of symbolic solutions for the direct and inverse robot kinematics is a desired capability not previously available to robotics engineers. In this article, we present a methodology for the design of a software system capable of solving the direct and inverse kinematics for n degree of freedom (dof) manipulators in symbolic form. The inputs to the system are the Denavit-Hartenberg parameters of the manipulator. The outputs of the system are the direct and inverse kinematics solutions in symbolic form. The system consists of a symbolic processor to perform matrix and algebraic manipulations and an expert system to solve the class of nonlinear equations involved in the solution of the inverse kinematics problem. The system can be used to study robot kinematics configurations whose inverse kinematics solutions are not known to exist a priori. Two examples are included to illustrate its capabilities. The first example provides explicit analytical solutions, previously believed nonexistent, for a 3 dof manipulator. A second example is included for a robot whose inverse kinematics solution requires intensive algebraic manipulations.