Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process

The evolution of mechanical components into smaller size generating a need for microwelding of these components using laser which offers better control as compared to arc and plasma processing. The present article describes the numerical simulation of laser micro-spot welding using finite element method. A two dimensional Gaussian distributed surface heat flux as a function of time is used to perform a sequentially coupled thermal and mechanical analysis. The model is used for simulating laser micro-spot welding of stainless steel sheet under different power conditions and configurations of mechanical constraints. The temperature dependent physical properties of SS304 have been considered for the simulation and an isotropic strain hardening model has been used. The simulated weld bead dimensions have been compared with experimental results and temperature profiles have been calculated. The maximum deformation of 0.02 mm is obtained with maximum laser power of 75 W. The thermal stress is more inducing factor to temperature induced residual stresses and plastic strain as compared to mechanical constraints. The plastic strain changes significantly by displacement constraints as compared to residual stress.     

有限元网格重新划分时新旧网格数据传递的新方法

此文提出了一种有限元网格重新划分时新旧网格数据传递的新方法,该方法简化了新旧网格系统的包含测试并且有适当的精度,可用于三维网格重新划分时数据的传递。     

Dimpling process in cold roll metal forming by finite element modelling and experimental validation

The dimpling process is a novel cold-roll forming process that involves dimpling of a rolled flat strip prior to the roll forming operation. This is a process undertaken to enhance the material properties and subsequent products’ structural performance while maintaining a minimum strip thickness. In order to understand the complex and interrelated nonlinear changes in contact, geometry and material properties that occur in the process, it is necessary to accurately simulate the process and validate through physical tests. In this paper, 3D non-linear finite element analysis was employed to simulate the dimpling process and mechanical testing of the subsequent dimpled sheets, in which the dimple geometry and material properties data were directly transferred from the dimpling process. Physical measurements, tensile and bending tests on dimpled sheet steel were conducted to evaluate the simulation results. Simulation of the dimpling process identified the amount of non-uniform plastic strain introduced and the manner in which this was distributed through the sheet. The plastic strain resulted in strain hardening which could correlate to the increase in the strength of the dimpled steel when compared to plain steel originating from the same coil material. A parametric study revealed that the amount of plastic strain depends upon on the process parameters such as friction and overlapping gap between the two forming rolls. The results derived from simulations of the tensile and bending tests were in good agreement with the experimental ones. The validation indicates that the finite element analysis was able to successfully simulate the dimpling process and mechanical properties of the subsequent dimpled steel products.     

滤膜法测定大气所■子体放射性浓度的计算公式推导

推导了用滤膜法测定环境空气中放射性(气土)子体(ThB、ThC)浓度的计算公式及其潜能公式,为放射性环境空气质量监测提供了一种方便简捷的方法。     

Determining reference conditions for TN, TP, SD and Chl-a in eastern plain ecoregion lakes, China

Establishing the nutrient reference condition(baseline environmental condition) of lakes in an ecoregion is a critical consideration in the development of scientifically defensible aquatic nutrient criteria.Three methods were applied to determine reference conditions in the Eastern plain ecoregion lakes with respect to total phosphorus(TP),total nitrogen(TN),planktonic chlorophyll a(Chl-a) and Secchi depth(SD).The reference condition value for the lakes in the Eastern plain ecoregion by the trisection method is TP of 0.029 mg/L,TN of 0.67 mg/L,Chl-a of 3.92 mg/m 3,SD of 0.85 m,and the reference condition range by the lake population distribution approach is TP of 0.014-0.043 mg/L,TN of 0.360-0.785 mg/L,Chl-a of 1.78-4.73 mg/m 3,SD of 0.68-1.21 m.Additionally,empirical models were developed for estimating the reference Chl-a concentration and SD successfully for lakes in the Eastern plain ecoregion.Overall,the data suggest that multiple methods can be used to determine reference conditions and that in Eastern plain ecoregion lakes the reference condition corresponds to a mesotrophic status.     

Finite element modeling of microstructural changes in dry and cryogenic machining of AZ31B magnesium alloy

Unsatisfactory corrosion resistance is one of the major disadvantages of magnesium alloys that impede their wide application. Microstructural changes, especially grain sizes, of Mg alloys have significant influence on their corrosion resistance. Cryogenic machining was reported to effectively induce grain refinement on Mg alloys and has a potential to improve their corrosion resistance. It is important to model these changes so that proper machining conditions can be found to enhance the corrosion rate of Mg alloys. In this paper, a preliminary study was conducted to model the microstructural changes of AZ31B Mg alloy during dry and cryogenic machining using the finite element (FE) method and a user subroutine based on the dynamic recrystallization (DRX) mechanism of Mg alloys. Good agreement in terms of grain size and affected layer thickness was found between experimental and predicted results. A numerical study was conducted using this model to investigate the influence of rake angle on microstructural changes after cryogenic machining.     

2019年西安首场雾霾PM2.5关键特征的综合诊断

通过对WRF-Chem（Weather Research and Forecasting Model Coupled to Chemistry）环境模式模拟资料、HYSPLIT（HYbrid Single Particle Lagrangian Integrated Trajectory Model）前/后向气团轨迹资料、环境站监测资料，以及西安理工大学（Xi''an University of Technology，简称XUT）多波长激光雷达、米散射激光雷达、能见度仪、粒谱仪等观测资料的综合诊断，探讨了2019年1月初发生在西安的雾霾过程（记为首场雾霾）PM_2.5组分、分布及传输特征，旨在为雾霾气溶胶研究提供有益的个例积累.定性、定量双重检验表明，Chem模式较成功复制了此次雾霾气溶胶过程.利用这些可靠的模式数据分析表明，PM_2.5中碳气溶胶的主要组分为有机碳，约占85%，强盛期气溶胶各组分随高度增加均呈递减趋势，各组分近地面浓度最高.通过对两类不同方法获取的消光系数对比分析表明，相比于模式数据，激光雷达数据具有更高的垂直分辨率，因此，更善于描述消光廓线的细节特征.通过对多源资料的综合诊断最终揭示出，"北风涌"是雾霾消散的关键影响因子，沿铜川-西安-山阳一带存在着污染物传输的重要路径，雾霾由此体现出自北向南依次消散的特征.