基于压阻检测的双端固支硅纳米梁谐振特性研究

我们利用压阻检测法对双端固支硅纳米梁的谐振特性进行了研究.在(111)硅衬底上,用KOH选择性腐蚀制作出了厚度约为242 nm的双端固支硅纳米梁;对梁上表面采用Ar离子进行局部轰击,受轰击侧的原子结构遭到破坏,电导率显著下降,未受轰击侧原子结构则保持原掺杂结构,在梁厚度方向形成非对称掺杂,表现出压阻特性.利用该局部压阻,我们首次完成了对双端固支硅纳米梁的谐振特性的测量,其共振频率为400 kHz;同时,我们对获得的低Q值进行了初步讨论.     

微谐振梁的激振与拾振研究

主要研究静电激励/电容拾振硅微谐振梁的激振拾振问题,推导谐振梁的激振与响应的等效数学模型,分析谐振梁的同频干扰问题,建立其等效电路模型,提出一种基于双端激励/双端检测的结构,能够有效的抑制干扰模态和消除同频信号干扰.     

多晶硅双端固支梁高周循环下疲劳特性的分析

多晶硅固支梁是MEMS器件中较常见的可动部件,通过静电激励的方式对其进行疲劳振动加载;所用结构为面外运动结构,为了测试样品的加速疲劳特性,通过在固支梁面内引入缺陷的方式来增大应力水平值;器件在经历了1.72×1011次循环之后,微梁的谐振频率、振动幅度发生了较大偏移,其谐振频率的偏移量达到14.531 kHz,器件性能发生了严重的退化.研究结果表明,利用谐振频率的改变来表征材料性能的退化是一种准确、可行的方法,同时本文进一步分析指出,器件上引入凹槽缺陷的方法确实可起到加速疲劳的作用;可利用此方法制作不同应力水平幅度的结构进行振动载荷疲劳加载实验,从而得到固支梁结构疲劳加速因子.     

一种基于谐振音叉的新型差动式硅微加速度计设计与分析

为提高谐振式加速度计灵敏度、稳定性以及减小加速度计体积,本文提出一种结构新颖的谐振式硅微加速度计。采用一级微杠杆机构对质量块惯性力进行放大,通过一对差动布置的双端固支音叉谐振器的固有频率变化检测惯性力,从而实现对加速度的测量。该加速度计可采用体硅加工工艺,给出了总体工艺流程。采用解析和有限元分析方法对加速度计敏感元件进行了分析,有限元分析结果与解析分析结果相吻合,有限元分析可得加速度计灵敏度为57.4 Hz/gn。分析结果表明该加速度计结构具有高灵敏度、高温度稳定性和小体积等优点。     

不等基频硅微谐振式加速度计

分析了硅微谐振式加速度计的两个谐振器在谐振频率相交点附近区域产生耦合的原因,设计了一种新型的不等基频硅微谐振式加速度计,并对其进行了有限元仿真.该加速度计由质量块、放大惯性力的杠杆机构以及一对尺寸不同的谐振器组成.采用DDSOG工艺加工.利用ANSYS有限元软件进行仿真,结果表明加速度计上谐振器的谐振基频为124 67...     

扩散硅谐振式压力传感器同频干扰的建模与消除

为简化谐振式微机械压力传感器的制备工艺,提出了一种采用扩散硅作为谐振梁的压力传感器,并采用电磁激励实现传感器的闭环控制.实验中发现:由于采用扩散硅材料,传感器受到较为严重的同频干扰影响,因此,消除传感器的同频干扰成为需要解决的一个主要问题.通过对采用扩散硅作为谐振梁的压力传感器微结构进行分析,建立了传感器主要噪声来源同频干扰的等效电路模型,据此提出一种新的不对称双端激励解决方法.实验结果表明,该方法可有效地降低传感器的同频干扰,传感器的信噪比由1.53提高至35,为传感器闭环激励和检测提供了有效的手段.     

硅岛式微谐振压力传感器灵敏度分析与仿真

微谐振式压力传感器尺寸小、重量轻、精度高并具有效字输出,在航空航天等领域有着广阔的应用前景.然而由于微机械加工工艺的限制,复杂结构的制作存在很多困难,因而为实现高灵敏度压力测量,微谐振式压力传感器的结构设计就显得尤为重要,因此提出一种新型硅岛式谐振梁支撑结构,它利用硅薄膜作为典型的一次敏感元件,并在其上表面中央部位设计了两个硅岛凸起平台,用以固定硅谐振梁,并通过有限元软件ANSYS进行仿真.分析结果表明,在一定量程内,该结构能有效提高谐振梁内的应力放大倍数,进而提高微压力传感器的灵敏度.     

MEMS氮化钛谐振式压力传感器研究

提出了一种基于TiN双谐振梁结构的MEMS谐振式压力传感器,利用TiN谐振梁的谐振频率与被测压力的关系进行压力测量。针对传感器的敏感结构建立了数学模型,通过理论分析和ANSYS有限元软件的模拟,得出了谐振梁长度的变化范围和谐振梁的结构参数,并确定了TiN谐振梁在矩形压力膜上方的最佳位置。这对传感器的结构设计具有重要的指导意义。     

单晶硅纳米梁的分子动力学模拟

采用经典的分子动力学方法,分析了两端固支的纳米梁的力学行为特征.在初始应变下,梁的表面原子发生了重构,而初始应变能仅是重构能的1%,随着分子动力学迭代的开始,初始应变能逐渐转化为梁中原子的热运动动能和梁的谐振能量.从其能量的变化曲线得到,梁的谐振频率为2.32×1010Hz.与连续介质近似结果对比发现,该谐振频率对应的杨氏模量为101 GPa,小于体硅的131 GPa,说明在该尺度下杨氏模量小于体材料.另外,分子动力学结果显示,发热是纳米梁耗散机制的重要方式,即谐振能量转化为梁中原子的热运动动能.     

压阻式加速度计双端固支梁结构的设计与分析

介绍一种压阻式加速度计双端固支梁的结构,并建立其三维实体有限元模型。分析了在惯性载荷作用下的弹性梁的应力及应变,并对弹性结构进行了模态分析。讨论影响灵敏度、固有频率等主要指标的因素,用有限元方法进行分析、模拟,以达到优化设计的目的。     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.     

Editorial: Special issue on recent advances in hybrid control theory and applications

正The demands of a rapidly advancing technology for faster and more accurate controllers have always had a strong influence on the progress of automatic control theory.In recent years control problems have been arising with increasing frequency in widely different areas,which cannot be addressed using conventional control techniques.The principal reason for this is the fact that a highly competitive economy is forcing systems to operate in regimes where     

Information for Authors

正Aim The Journals of Zhejiang University-SCIENCE(A/B/C)areedited by the international board of distinguished Chinese andforeign scientists,and are aimed to present the latest devel-opments and achievements in scientific research in China andoverseas to the world’s scientific circles,especially to stimulateand promote academic exchange between Chinese and for-eign scientists everywhere.     

Enhancing a leaf radiative transfer model to estimate concentrations and in vivo specific absorption coefficients of total carotenoids and chlorophylls a and b from single-needle reflectance and transmittance

The relative concentrations of different pigments within a leaf have significant physiological and spectral consequences. Photosynthesis, light use efficiency, mass and energy exchange, and stress response are dependent on relationships among an ensemble of pigments. This ensemble also determines the visible characteristics of a leaf, which can be measured remotely and used to quantify leaf biochemistry and structure. But current remote sensing approaches are limited in their ability to resolve individual pigments. This paper focuses on the incorporation of three pigments—chlorophyll a, chlorophyll b, and total carotenoids—into the LIBERTY leaf radiative transfer model to better understand relationships between leaf biochemical, biophysical, and spectral properties.Pinus ponderosa and Pinus jeffreyi needles were collected from three sites in the California Sierra Nevada. Hemispheric single-leaf visible reflectance and transmittance and concentrations of chlorophylls a and b and total carotenoids of fresh needles were measured. These data were input to the enhanced LIBERTY model to estimate optical and biochemical properties of pine needles. The enhanced model successfully estimated reflectance (RMSE = 0.0255, BIAS = 0.00477, RMS%E = 16.7%), had variable success estimating transmittance (RMSE = 0.0442, BIAS = 0.0294, RMS%E = 181%), and generated very good estimates of carotenoid concentrations (RMSE = 2.48 µg/cm², BIAS = 0.143 µg/cm², RMS%E = 20.4%), good estimates of chlorophyll a concentrations (RMSE = 10.7 µg/cm², BIAS = − 0.992 µg/cm², RMS%E = 21.1%), and fair estimates of chlorophyll b concentrations (RMSE = 7.49 µg/cm², BIAS = − 2.12 µg/cm², RMS%E = 43.7%). Overall root mean squared errors of reflectance, transmittance, and pigment concentration estimates were lower for the three-pigment model than for the single-pigment model. The algorithm to estimate three in vivo specific absorption coefficients is robust, although estimated values are distorted by inconsistencies in model biophysics. The capacity to invert the model from single-leaf reflectance and transmittance was added to the model so it could be coupled with vegetation canopy models to estimate canopy biochemistry from remotely sensed data.     

Mr. Twinn’s bombes

This article discusses the history and design of the special versions of the bombe key-finding machines used by Britain’s Government Code & Cypher School (GC&CS) during World War II to attack the Enigma traffic of the Abwehr (the German military intelligence service). These special bombes were based on the design of their more numerous counterparts used against the traffic of the German armed services, but differed from them in important ways that highlight the adaptability of the British bombe design, and the power and flexibility of the diagonal board. Also discussed are the changes in the Abwehr indicating system that drove the development of these machines, the ingenious ways in which they were used, and some related developments involving the bombes used by the U.S. Navy’s cryptanalytic unit (OP-20-G).