Structural characterization of high-pressure C–Na<Subscript>2</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript> by single-crystal diffraction and <Superscript>29</Superscript>Si MAS NMR

Single crystals of C–Na₂Si₂O₅ have been synthesized from the hydrothermal recrystallization of a glass. The title compound is monoclinic, space group P2₁/c with Z= 8 and unit-cell parameters a= 4.8521 (4)Å, b=23.9793(16)Å, c=8.1410(6)Å, β=90.15(1)° and V=947.2(2)ų. The structure has been determined by direct methods and belongs to the group of phyllosilicates. It is based on layers of tetrahedra with elliptically six-membered rings in chair conformation. The sequence of directedness within a single ring is UDUDUD. The sheets are parallel to (010) with linking sodium cations in five- and sixfold coordination. Concerning the shape and the conformation of the rings, C–Na₂Si₂O₅ is closely related to β-Na₂Si₂O₅. However, both structures differ in the stacking sequences of the layers. A possible explanation for the frequently observed polysynthetic twinning of phase C is presented. In the ²⁹Si MAS-NMR spectrum of C–Na₂Si₂O₅ four well-resolved lines of equal intensity are observed at ?86.0, ?86.3, ?87.4, and ?88.2?ppm. The narrow range of isotropic chemical shifts reflects the great similarity of the environments of the different Si sites. This lack of pronounced differences in geometry renders a reliable assignment of the resonance lines to the individual sites on the basis of known empiric correlations and geometrical features impossible.     

Crystal structure and refined formula of garyansellite Mg<Subscript>2</Subscript>Fe<Superscript>3+</Superscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH) · 2H<Subscript>2</Subscript>O

Single-crystal study of the structure (R = 0.0268) was performed for garyansellite from Rapid Creek, Yukon, Canada. The mineral is orthorhombic, Pbna, a = 9.44738(18), b = 9.85976(19), c = 8.14154(18) Å, V = 758.38(3) ų, Z = 4. An idealized formula of garyansellite is Mg₂Fe³⁺(PO₄)₂(OH) · 2H₂O. Structurally the mineral is close to other members of the phosphoferrite–reddingite group. The structure contains layers of chains of M(2)O₄(OH)(H₂O) octahedra which share edges to form dimers and connected by common edges with isolated from each other M(1)O₄(H₂O)₂ octahedra. The neighboring chains are connected to the layer through the common vertices of M(2) octahedra and octaahedral layers are linked through PO₄ tetrahedra.     

Ab initio calculations on the O<Subscript>2</Subscript><Superscript>3−</Superscript>-Y<Superscript>3+</Superscript> center in CaF<Subscript>2</Subscript> and SrF<Subscript>2</Subscript>: its electronic structure and hyperfine constants

The O₂ ^3?-Y³⁺ center in fluorite-type structures (CaF₂ and SrF₂) has been investigated at the density functional theory (DFT) level using the CRYSTAL06 code. Our calculations were performed by means of the hybrid B3PW method in which the Hartree–Fock exchange is mixed with the DFT exchange functional, using Becke’s three parameter method, combined with the non-local correlation functionals by Perdew and Wang. Our calculations confirm the stability and the molecular character of the O₂ ^3?-Y³⁺ center. The unpaired electron is shown to be almost exclusively localized on and equally distributed between the two oxygen atoms that are separated by a bond distance of 2.47 Å in CaF₂ and 2.57 Å in SrF₂. The calculated ¹⁷O and ¹⁹F hyperfine constants for of the O₂ ^3?-Y³⁺ center are in good agreement with their corresponding experimental values reported by previous electron paramagnetic resonance and electron nuclear double resonance studies, while discrepancies are notable for the ⁸⁹Y hyperfine constants.     

Kamarizaite,Fe<Stack><Subscript>3</Subscript><Superscript>3+</Superscript></Stack>(AsO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>3</Subscript> · 3H<Subscript>2</Subscript>O,a new mineral species,arsenate analogue of tinticite

Kamarizaite, a new mineral species, has been identified in the dump of the Kamariza Mine, Lavrion mining district, Attica Region, Greece, in association with goethite, scorodite, and jarosite. It was named after type locality. Kamarizaite occurs as fine-grained monomineralic aggregates (up to 3 cm across) composed of platy crystals up to 1 μm in size and submicron kidney-shaped segregations. The new mineral is yellow to beige, with light yellow streak. The Mohs hardness is about 3. No cleavage is observed. The density measured by hydrostatic weighing is 3.16(1) g/cm³, and the calculated density is 3.12 g/cm³. The wavenumbers of absorption bands in the IR spectrum of kamarizaite are (cm^?1; s is strong band, w is weak band): 3552, 3315s, 3115, 1650w, 1620w, 1089, 911s, 888s, 870, 835s, 808s, 614w, 540, 500, 478, 429. According to TG and IR data, complete dehydration and dehydroxylation in vacuum (with a weight loss of 15.3(1)%) occurs in the temperature range 110–420°C. Mössbauer data indicate that all iron in kamarizaite is octahedrally coordinated Fe³⁺. Kamarizaite is optically biaxial, positive: n _min = 1.825, n _max = 1.835, n _mean = 1.83(1) (for a fine-grained aggregate). The chemical composition of kamarizaite (electron microprobe, average of four point analyses) is as follows, wt %: 0.35 CaO, 41.78 Fe₂O₃, 39.89 As₂O₅, 1.49 SO₃, 15.3 H₂O (from TG data); the total is 98.81. The empirical formula calculated on the basis of (AsO₄,SO₄)₂ is Ca_0.03Fe _2.86 ³⁺ (AsO₄)_1.90(SO₄)_0.10(OH)_2.74 · 3.27H₂O. The idealized formula is Fe ₃ ³⁺ (AsO₄)₂(OH)₃ · 3H₂O. Kamarizaite is an arsenate analogue of orthorhombic tinticite, space group Pccm, Pcc2, Pcmm, Pcm2₁, or Pc2m; a = 21.32(1), b = 13.666(6), c =15.80(1) Å, V= 4603.29(5) ų, Z= 16. The strongest reflections of the X-ray powder diffraction pattern [\(\bar d\), Å (I, %) (hkl)] are: 6.61 (37) (112, 120), 5.85 (52) (311), 3.947 (100) (004, 032, 511), 3.396 (37) (133, 431), 3.332 (60) (314), 3.085 (58) (621, 414, 324). The type material of kamarizaite is deposited in the Mineralogical Collection of Technische Universität Bergakademie Freiberg, Germany, inventory number 82199.     

Electrical conductivity,thermopower and <Superscript>57</Superscript>Fe Mössbauer spectroscopy of aegirine (NaFeSi<Subscript>2</Subscript>O<Subscript>6</Subscript>)

DC and AC electrical conductivities were measured on samples of two different crystals of the mineral aegirine (NaFeSi₂O₆) parallel () and perpendicular () to the [001] direction of the clinopyroxene structure between 200 and 600 K. Impedance spectroscopy was applied (20 Hz–1 MHz) and the bulk DC conductivity _DC was determined by extrapolating AC data to zero frequency. In both directions, the log _DC – 1/T curves bend slightly. In the high- and low-temperature limits, differential activation energies were derived for measurements [001] of E_A 0.45 and 0.35 eV, respectively, and the numbers [001] are very similar. The value of _DC [001] with _DC(300 K) 2.0 × 10^{–6 –1}cm^–1 is by a factor of 2–10 above that measured [001], depending on temperature, which means anisotropic charge transport. Below 350 K, the AC conductivity () (/2=frequency) is enhanced relative to _DC for both directions with an increasing difference for rising frequencies on lowering the temperature. An approximate power law for () is noted at higher frequencies and low temperatures with () ^s, which is frequently observed on amorphous and disordered semiconductors. Scaling of () data is possible with reference to _DC, which results in a quasi-universal curve for different temperatures. An attempt was made to discuss DC and AC results in the light of theoretical models of hopping charge transport and of a possible Fe²⁺ Fe³⁺ electron hopping mechanism. The thermopower (Seebeck effect) in the temperature range 360 K < T <770 K is negative in both directions. There is a linear – 1/T relationship above 400 K with activation energy E 0.030 eV [001] and 0.070 eV [001]. ⁵⁷Fe Mössbauer spectroscopy was applied to detect Fe²⁺ in addition to the dominating concentration of Fe³⁺.     

The solubility of Gd<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> and the hydrolysis of Gd<Superscript>3+</Superscript> in acidic solutions at 250°C and saturation vapor pressure

The solubility of Gd₂Ti₂O₇ ceramic in acidic solutions (HCl and HClO₄) was studied at 250°C and saturation vapor pressure within pH 2.5–5.2. The dissolution process occurs mainly via two reactions: 0.5 Gd₂Ti₂O_7(cr) + 3H⁺ = Gd³⁺ + TiO_2(cr) + 1.5 H₂O at pH < 3 and 0.5Gd₂Ti₂O₇(cr) + H⁺ + 0.5H₂O = Gd(OH) ₂ ⁺ TiO₂(cr) at pH 3–5. The thermodynamic equilibrium constants were calculated at the 0.95 confidence level as log K ₍₁₎ ^o = 4.12 ± 0.47; = ?0.97 ± 0.16 at 250°C. It was shown that Gd³⁺ undergoes hydrolysis in solutions with pH > 3, and the species Gd(OH) ₂ ⁺ dominates up to at least pH 5. At pH < 3, Gd occurs in solutions as Gd³⁺. The second constant of Gd³⁺ hydrolysis was determined at 250°C as K ^o = ?5.09 ± 0.5, and the thermodynamic characteristics of the initial Gd₂Ti₂O₇ solid phase were determined: S _298.15 ^o = 251.4 J/(mol K) and ΔfG _298.15 ^o = ?3630 ± 10 kJ/mol.     

The formation and recombination kinetics of [Si<Stack><Subscript>4</Subscript><Superscript>5−</Superscript></Stack>] centers in zircon

The radiation sensitivity, time stability and optical sensitivity of [Si₄⁵⁻] paramagnetic centers in natural zircon crystals, particularly those from the Late Neopleistocenic tuff of the Elbrus Volcano, have been studied. Optical bleaching was shown to result in the recombination of [Si₄⁵⁻] centers, while the concentration of centers increases in the absence of light due to the internal radiation background. The data obtained show the infeasibility of using [Si₄⁵⁻] centers in zircons as paleodosimeters in conventional dating methods using electron paramagnetic resonance (EPR) spectroscopy. New specific techniques need to be developed for EPR dating of zircons.     

Characterization of synthetic hedenbergite (CaFeSi<Subscript>2</Subscript>O<Subscript>6</Subscript>)–petedunnite (CaZnSi<Subscript>2</Subscript>O<Subscript>6</Subscript>) solid solution series by X-ray powder diffraction and <Superscript>57</Superscript>Fe Mössbauer spectroscopy

Clinopyroxenes along the solid solution series hedenbergite (CaFeSi₂O₆)–petedunnite (CaZnSi₂O₆) were synthesized under hydrothermal conditions and different oxygen fugacities at temperatures of 700 to 1200 °C and pressures of 0.2 to 2.5 GPa. Properties were determined by means of X-ray diffraction, electron microprobe analysis and ⁵⁷Fe Mössbauer spectroscopy at 298 K. Unit-cell parameters display a linear dependency with changing composition. Parameters a₀ and b₀ exhibit a linear decrease with increasing Zn content while the monoclinic angle increases linearly. Parameter c₀ is not affected by composition and remains constant at a value of 5.248 Å. The molar volume can be described according to the equation V_mol (ccm mol^–1)=33.963(16)–0.544(31)*Zn pfu. The isomer shifts of ferrous iron on the octahedral M1 site in hedenbergite are not affected by composition along the hedenbergite–petedunnite solid solution series and remain constant at an average value of 1.18 mm s^–1. Quadrupole splittings of Fe²⁺ on the M1 are, however, strongly affected by composition, and they decrease linearly with increasing petedunnite component in hedenbergite, ranging from 2.25 mm s^–1 for pure hedenbergite end member to 1.99 mm s^–1 for a solid solution containing 84 mole% petedunnite. The half-widths of intermediate solid solutions vary between 0.26 and 0.33 mm s^–1, indicating, in accordance with the microprobe analyses and X-ray diffraction, that samples are homogeneous and well-crystallized. The data from this study demonstrate that the crystallinity of hedenbergitic clinopyroxenes can be improved by using oxide mixtures as starting materials. Crystal sizes for intermediate compositions range up to 70 m, suitable for standard single-crystal X-ray analysis.This paper is dedicated to Prof. Dr. Georg Amthauer, Salzburg, on occasion of his 60th birthday     

Photoluminescence spectra of S<Subscript>2</Subscript><Superscript><Emphasis Type="Bold">−</Emphasis></Superscript> center in natural and heat-treated scapolites

The emission and excitation spectra of yellow luminescence due to S₂ ⁻ in scapolites (#1 from Canada and #2 from an unknown locality) were observed at 300, 80 and 10 K. Emission and excitation bands at 10 K showed vibronic structures with a series of maxima spaced 15–30 and 5–9 nm, respectively. The relative efficiency of yellow luminescence from scapolite #2 was increased up to 117 times by heat treatment at 1,000°C for 2 h in air. The enhancement of yellow luminescence by heat treatment was ascribed to the alteration of SO₃ ²⁻ and SO₄ ²⁻ to S₂ ⁻ in scapolite.     

Attikaite,Ca<Subscript>3</Subscript>Cu<Subscript>2</Subscript>Al<Subscript>2</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>4</Subscript>(OH)<Subscript>4</Subscript> · 2H<Subscript>2</Subscript>O,a new mineral species

Attikaite, a new mineral species, has been found together with arsenocrandalite, arsenogoyazite, conichalcite, olivenite, philipsbornite, azurite, malachite, carminite, beudantite, goethite, quartz, and allophane at the Christina Mine No. 132, Kamareza, Lavrion District, Attiki Prefecture (Attika), Greece. The mineral is named after the type locality. It forms spheroidal segregations (up to 0.3 mm in diameter) consisting of thin flexible crystals up to 3 × 20 × 80 μm in size. Its color is light blue to greenish blue, with a pale blue streak. The Mohs’ hardness is 2 to 2.5. The cleavage is eminent mica-like parallel to {001}. The density is 3.2(2) g/cm³ (measured in heavy liquids) and 3.356 g/cm³ (calculated). The wave numbers of the absorption bands in the infrared spectrum of attikaite are (cm^?1; sh is shoulder; w is a weak band): 3525sh, 3425, 3180, 1642, 1120w, 1070w, 1035w, 900sh, 874, 833, 820, 690w, 645w, 600sh, 555, 486, 458, and 397. Attikaite is optically biaxial, negative, α = 1.642(2), β = γ = 1.644(2) (X = c) 2V _means = 10(8)°, and 2V _calc = 0°. The new mineral is microscopically colorless and nonpleochroic. The chemical composition (electron microprobe, average over 4 point analyses, wt %) is: 0.17 MgO, 17.48 CaO, 0.12 FeO, 16.28 CuO, 10.61 Al₂O₃, 0.89 P₂O₅, 45.45 As₂O₅, 1.39 SO₃, and H₂O (by difference) 7.61, where the total is 100.00. The empirical formula calculated on the basis of (O,OH,H₂O)₂₂ is: Ca_2.94Cu _1.93 ²⁺ Al_1.97Mg_0.04Fe _0.02 ²⁺ [(As_3.74S_0.16P_0.12)_Σ4.02O_16.08](OH)_3.87 · 2.05H₂ O. The simplified formula is Ca₃Cu₂Al₂(AsO₄)₄(OH)₄ · 2H₂O. Attikaite is orthorhombic, space group Pban, Pbam or Pba2; the unit-cell dimensions are a = 10.01(1), b = 8.199(5), c = 22.78(1) Å, V = 1870(3) ų, and Z = 4. In the result of the ignition of attikaite for 30 to 35 min at 128–140°, the H₂O bands in the IR spectrum disappear, while the OH-group band is not modified; the weight loss is 4.3%, which approximately corresponds to two H₂O molecules per formula; and parameter c decreases from 22.78 to 18.77 Å. The strongest reflections in the X-ray powder diffraction pattern [d, Å (I, %)((hkl)] are: 22.8(100)(001), 11.36(60)(002), 5.01(90)(200), 3.38(5)(123, 205), 2.780(70)(026), 2.682(30)(126), 2.503(50)(400), 2.292(20)(404). The type material of attikaite is deposited in the Fersman Mineralogical Museum, Russian Academy of Sciences, Moscow. The registration number is 3435/1.     

Behavior of isotope (<Superscript>18</Superscript>O/<Superscript>16</Superscript>O, <Superscript>234</Superscript>U/<Superscript>238</Superscript>U) systems during the formation of uranium deposits of the “sandstone” type

The uneven character of the distribution of ¹⁸O/¹⁶O and ²³⁴U/²³⁸U values was established in the vertical cross section of the productive sequence of the Dybryn uranium deposit (Vitim uranium-ore region, Buryatia). Both a deficiency and an excess of ²³⁴U in relation to the equilibrium ²³⁴U/²³⁸U ratio in the vertical sequence may provide evidence for the extremely low rate of the infiltration water flow. The behavior of oxygen isotope characteristics for different size fractions of terrigenous rocks provides evidence for active uranium redistribution and openness of the isotope system of this element during interaction of terrigenous–sedimentary rocks with infiltration waters.     

Elastic and thermoelastic properties of synthetic Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript> (åkermanite) and Ca<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript> (hardystonite)

Elastic and thermoelastic constants of large single crystals of Ca₂MgSi₂O₇ and Ca₂ZnSi₂O₇ have been derived from ultrasonic resonance frequencies of plane-parallel plates and their shift upon variation of temperature, respectively. In addition, coefficients of thermal expansion and dielectric constants were determined. Both species possess quite similar properties. As observed in other isotypic magnesium and zinc compounds, the mean elastic stiffness and the deviation from the Cauchy relations are significantly larger in the zinc compound, due to a covalent contribution of the Zn–O bond. Positive thermoelastic constants T₄₄ and T₆₆ in Ca₂MgSi₂O₇ allow temperature-independent ultrasonic generators and oscillators to be manufactured.     

Mineralogy,Mössbauer spectra and electrical conductivity of triphylite Li(Fe<Superscript>2+</Superscript>,Mn<Superscript>2+</Superscript>) PO<Subscript>4</Subscript>

The electrical conductivity of monocrystalline triphylite, Li(Fe²⁺,Mn²⁺)PO₄, with the orthorhombic olivine-type structure was measured parallel (∥) to the [010] direction and ∥ [001] (space group Pnma), between ～400 and ～700 K. Electrical measurements on triphylite are of technological interest because LiFePO₄ is a promising electrode material for rechargeable Li batteries. Triphylite was examined by electron microprobe, ICP atomic emission spectroscopy, X-ray diffraction, Mössbauer spectroscopy and microscopic analysis. The DC conductivity σ_DC was determined from AC impedance data (20 Hz–1 MHz) extrapolating to zero frequency. Triphylite shows σ_DC with activated behavior measured ∥ [010] between ～500 and ～700 K during the first heating up, with activation energy of E _A = 1.52 eV; on cooling E _A = 0.61 eV was found down to ～400 K and extrapolated σ_DC (295 K) ～10^?9 Ω^?1cm^?1; ∥ [001] E _A = 0.65 eV and extrapolated σ_DC(295 K) ～10^?9 to 10^?10 Ω^?1cm^?1, measured during the second heating cycle. The enhanced AC conductivity relative to σ_DC at lower temperatures indicates a hopping-type charge transport between localized levels. Conduction during the first heating up is ascribed to ionic Li⁺ hopping. DC polarization experiments showed conduction after the first heating up to be electronic related to lowered activation energy. Electronic conduction appears to be coupled with the presence of Li⁺ vacancies and Fe³⁺, formed by triphylite alteration. For comparison, σ_DC was measured on the synthetic compound LiMgPO₄ with olivine-type structure, where also an activated behavior of σ_DC with E _A ～1.45 eV was observed during heating and cooling due to ionic Li⁺ conduction; here no oxidation can occur associated with formation of trivalent cations.     

High-pressure X-ray diffraction and Raman spectroscopy of CaFe<Subscript>2</Subscript>O<Subscript>4</Subscript>-type β-CaCr<Subscript>2</Subscript>O<Subscript>4</Subscript>

In situ high-pressure synchrotron X-ray diffraction and Raman spectroscopic studies of orthorhombic CaFe₂O₄-type β-CaCr₂O₄ chromite were carried out up to 16.2 and 32.0 GPa at room temperature using multi-anvil apparatus and diamond anvil cell, respectively. No phase transition was observed in this study. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields a zero-pressure volume of V ₀ = 286.8(1) ų, an isothermal bulk modulus of K ₀ = 183(5) GPa and the first pressure derivative of isothermal bulk modulus K ₀′ = 4.1(8). Analyses of axial compressibilities show anisotropic elasticity for β-CaCr₂O₄ since the a-axis is more compressible than the b- and c-axis. Based on the obtained and previous results, the compressibility of several CaFe₂O₄-type phases was compared. The high-pressure Raman spectra of β-CaCr₂O₄ were analyzed to determine the pressure dependences and mode Grüneisen parameters of Raman-active bands. The thermal Grüneisen parameter of β-CaCr₂O₄ is determined to be 0.93(2), which is smaller than those of CaFe₂O₄-type CaAl₂O₄ and MgAl₂O₄.     

The effect of chlorite interlayering on <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar biotite dating: an <Superscript>40</Superscript>Ar–<Superscript>39</Superscript>Ar laser-probe and TEM investigations of variably chloritised biotites

Biotite is one of the most common minerals dated by the ⁴⁰Ar–³⁹Ar method. It frequently shows K contents below the expected stoichiometric value, suggesting the presence of low-K impurities. The most common low-K alteration product of biotite is chlorite. Therefore, it is important to understand the effects of chlorite interlayering on ⁴⁰Ar–³⁹Ar ages in order to correctly interpret ⁴⁰Ar–³⁹Ar data. This study examines the outcome of ⁴⁰Ar–³⁹Ar dating analyses on variably chloritised biotites from Ordovician intrusive rocks. The infrared (IR) laser-probe technique and different gas extraction methods were adopted. Incremental laser-heating data on bulk samples yielded hump-shaped age profiles with meaningless young and old age steps. Both the extent of anomalous old age steps and the degree of discordance of the age spectra were much more pronounced in the more chloritised biotite samples. In contrast, in situ data on rock chips and total-fusion ages on single biotite flakes yielded ages concordant with, or younger than, the inferred emplacement ages. Transmission electron microscopy (TEM) was used to texturally characterise biotite samples at the nanometre scale. It was also used to document the complex decomposition-transformation process affecting interlayered biotite–chlorite during in-vacuo IR-laser heating to temperatures ranging from ~600 to >1,000 °C. TEM results suggest that hump-shaped age profiles result from an interplay between ³⁹Ar_K redistribution by recoil during sample irradiation and differential release of argon isotopes hosted in three main reservoirs. These reservoirs are (from least to most retentive): extended defects, chlorite and biotite. The final descending age segment is attributed to the progressive release of argon with increasing temperature from large biotite domains for which ³⁹Ar_K recoil loss was less important. ⁴⁰Ar–³⁹Ar data support previous findings, which suggest that ⁴⁰Ar–³⁹Ar ages when recoil effects are minimised, provide minimum estimates that approach the true biotite age, when the pristine domains are analysed. The most effective approach for obtaining meaningful ⁴⁰Ar–³⁹Ar ages was using individual total-fusion analyses on carefully selected, single flakes previously split along the basal cleavage by wet-grinding and corresponding to a sample mass of a few micrograms.Editorial responsibility: I Parsons     

Droninoite,Ni<Subscript>3</Subscript>Fe<Superscript>3+</Superscript>Cl(OH)<Subscript>8</Subscript> · 2H<Subscript>2</Subscript>O,a new hydrotalcite-group mineral species from the weathered Dronino meteorite

A new mineral, droninoite, was found in a fragment of a weathered Dronino iron meteorite (which fell near the village of Dronino, Kasimov district, Ryazan oblast, Russia) as dark green to brown fine-grained (the size of single grains is not larger than 1 μm) segregations up to 0.15 × 1 × 1 mm in size associated with taenite, violarite, troilite, chromite, goethite, lepidocrocite, nickelbischofite, and amorphous Fe³⁺ hydroxides. The mineral was named after its type locality. Aggregates of droninoite are earthy and soft; the Mohs hardness is 1–1.5. The calculated density is 2.857 g/cm³. Under a microscope, droninoite is dark gray-green and nonpleochroic. The mean (cooperative for fine-grained aggregate) refractive index is 1.72(1). The IR spectrum indicates the absence of S O ₄ ^2? and C O ₃ ^2? anions. Chemical composition (electron microprobe, partition of total iron into Fe²⁺ and Fe³⁺ made on the basis of the ratio (Ni + Fe²⁺): Fe³⁺ = 3: 1; water is calculated from the difference) is as follows, wt %: 36.45 NiO, 12.15 FeO, 17.55 Fe₂O₃, 23.78 H₂O, 13.01 Cl, ?O=Cl₂ ?2.94, total is 100.00. The empirical formula (Z = 6) is Ni_2.16Fe _0.75 ²⁺ Fe _0.97 ³⁺ Cl_1.62(OH)_7.10 · 2.28H₂O. The simplified formula is Ni₃Fe³⁺Cl(OH)₈ · 2H₂O. Droninoite is trigonal, space group R \(\bar 3\) m, R3m, or R32; a = 6.206(2), c = 46.184(18) Å; V = 1540.4(8) ų. The strong reflections in the X-ray powder diffraction pattern [d, Å (I, %) (hkl)] are 7.76(100)(006), 3.88(40)(0.0.12), 2.64(25)(202, 024), 2.32(20)(0.2.10), 1.965(0.2.16). The holotype specimen is deposited at the Fersman Mineralogical Museum, Russian Academy of Sciences, Moscow, registration number 3676/1.     

Assessment of groundwater contamination by NO<Subscript>3</Subscript><Superscript>−</Superscript> using geographical information system in the Zhangye Basin,Northwest China

Geographical information system (GIS) technology was used to investigate NO₃ ⁻ concentration of groundwater in the Zhangye Basin, Northwest China. Thematic information and NO₃ ⁻ data of groundwater from the Zhangye Basin were analyzed in a GIS environment to study the extent and variation of NO₃ ⁻ concentration and to establish spatial relationships with corresponding land use types. About 38.8% of groundwater samples showed NO₃ ⁻ concentration above the human affected value (13 mg/l NO₃ ⁻), while more than 10.2% exceeded the maximum acceptable level (50 mg/l NO₃ ⁻) according to WHO regulations. The spatial distribution of NO₃ ⁻ of groundwater in the Zhangye Basin showed an obvious character of zonation; the high NO₃ ⁻ concentration was mainly located in the city seat areas, and Zhangye City was the high-value center. The probability of over 90% for NO₃ ⁻ concentration exceeding 13 mg/l was found in urban seat areas. The spatial analyses indicated that groundwater contamination by NO₃ ⁻ was closely related to one specific land use class, the urban. The NO₃ ⁻ concentration of groundwater under urban was significantly higher than that under irrigation land or sand dune. Most of the unacceptable NO₃ ⁻ levels were found in groundwater samples assigned to urban area, but a few were also found allotted to irrigation land class. Therefore, urban source was considered the principal source of NO₃ ⁻ contamination of groundwater in the Zhangye Basin, while irrigation land source was still a possible source of NO₃ ⁻ contamination.     

Optical spectroscopic study of synthetic NaScSi<Subscript>2</Subscript>O<Subscript>6</Subscript>–CaNiSi<Subscript>2</Subscript>O<Subscript>6</Subscript> pyroxenes at normal and high pressures

Six synthetic NaScSi₂O₆–CaNiSi₂O₆ pyroxenes were studied by optical absorption spectroscopy. Five of them of intermediate (Na_1−x , Ca _x )(Sc_1−x , Ni _x )Si₂O₆ compositions show spectra typical of Ni²⁺ in octahedral coordination, more precise Ni²⁺ at the M1 site of the pyroxene structure. The common feature of all spectra is three broad absorption bands with maxima around 8,000, 13,000 and 24,000 cm⁻¹ assigned to ³ A _2g → ³ T _2g, ³ A _2g → ³ T _1g and →³ T _1g (³ P) electronic spin-allowed transitions of ^VINi²⁺. A weak narrow peak at ∼14,400 cm⁻¹ is assigned to the spin-forbidden ³ A _2g → ¹ T _2g (¹ D) transition of Ni²⁺. Under pressure the spin-allowed bands shift to higher energies and change in intensity. The octahedral compression modulus, calculated from the shift of the ³ A _2g → ³ T _2g band in the (Na_0.7Ca_0.3)(Sc_0.7Ni_0.3)Si₂O₆ pyroxene is evaluated as 85±20 GPa. The Racah parameter B of Ni²⁺(M1) is found gradually changing from ∼919 cm⁻¹ at ambient pressure to ∼890 cm⁻¹ at 6.18 GPa. The Ni end-member pyroxene [(Ca_0.93 Ni_0.07)NiSi₂O₆] has a spectrum different from all others. In addition to the above mentioned bands of Ni²⁺(M1) it displays several new relatively intense and broad extra bands, which were attributed to electronic transitions of Ni²⁺ at the M2 site. In difference to CaO₈ polyhedron geometry of an eightfold coordination, Ni²⁺(M2)O₈ polyhedra are assumed to be relatively large distorted octahedra. Due to different distortions and different compressibilities of the M1 and M2 sites the Ni²⁺(M1)- and Ni²⁺(M2)-bands display rather different pressure-induced behaviors, becoming more resolved in the high-pressure spectra than in that measured at atmospheric pressure. The octahedral compression modulus of Ni²⁺(M1) in this end-member pyroxene is evaluated as 150 ± 25 GPa, which is noticeably larger than in Ni_0.3 pyroxene. This is due to a smaller size and, thus, a stiffer character of Ni²⁺(M1)O₆ octahedron in the (Ca_0.93Ni_0.07)NiSi₂O₆ pyroxene compared to (Na_0.7Ca_0.3)(Sc_0.7Ni_0.3)Si₂O₆.

Behaviour of Fe<Subscript>4</Subscript>O<Subscript>5</Subscript>–Mg<Subscript>2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions and their relation to coexisting Mg–Fe silicates and oxide phases

Experiments at high pressures and temperatures were carried out (1) to investigate the crystal-chemical behaviour of Fe₄O₅–Mg₂Fe₂O₅ solid solutions and (2) to explore the phase relations involving (Mg,Fe)₂Fe₂O₅ (denoted as O₅-phase) and Mg–Fe silicates. Multi-anvil experiments were performed at 11–20 GPa and 1100–1600 °C using different starting compositions including two that were Si-bearing. In Si-free experiments the O₅-phase coexists with Fe₂O₃, hp-(Mg,Fe)Fe₂O₄, (Mg,Fe)₃Fe₄O₉ or an unquenchable phase of different stoichiometry. Si-bearing experiments yielded phase assemblages consisting of the O₅-phase together with olivine, wadsleyite or ringwoodite, majoritic garnet or Fe³⁺-bearing phase B. However, (Mg,Fe)₂Fe₂O₅ does not incorporate Si. Electron microprobe analyses revealed that phase B incorporates significant amounts of Fe²⁺ and Fe³⁺ (at least ~?1.0 cations Fe per formula unit). Fe-L_2,3-edge energy-loss near-edge structure spectra confirm the presence of ferric iron [Fe³⁺/Fe_tot?=?~?0.41(4)] and indicate substitution according to the following charge-balanced exchange: [4]Si⁴⁺?+?[6]Mg²⁺?=?2Fe³⁺. The ability to accommodate Fe²⁺ and Fe³⁺ makes this potential “water-storing” mineral interesting since such substitutions should enlarge its stability field. The thermodynamic properties of Mg₂Fe₂O₅ have been refined, yielding H°_1bar,298?=???1981.5 kJ mol^??1. Solid solution is complete across the Fe₄O₅–Mg₂Fe₂O₅ binary. Molar volume decreases essentially linearly with increasing Mg content, consistent with ideal mixing behaviour. The partitioning of Mg and Fe²⁺ with silicates indicates that (Mg,Fe)₂Fe₂O₅ has a strong preference for Fe²⁺. Modelling of partitioning with olivine is consistent with the O₅-phase exhibiting ideal mixing behaviour. Mg–Fe²⁺ partitioning between (Mg,Fe)₂Fe₂O₅ and ringwoodite or wadsleyite is influenced by the presence of Fe³⁺ and OH incorporation in the silicate phases.     

Thermal expansion of hydrated six-coordinate silicon in thaumasite,Ca<Subscript>3</Subscript>Si(OH)<Subscript>6</Subscript>(CO<Subscript>3</Subscript>)(SO<Subscript>4</Subscript>)·12H<Subscript>2</Subscript>O

Thaumasite, Ca₃Si(OH)₆(CO₃)(SO₄)12H₂O, occurs as a low-temperature secondary alteration phase in mafic igneous and metamorphic rocks, and is recognized as a product and indicator of sulfate attack in Portland cement. It is also the only mineral known to contain silicon in six-coordination with hydroxyl (OH)^? that is stable at ambient P–T conditions. Thermal expansion of the various components of this unusual structure has been determined from single-crystal X-ray structure refinements of natural thaumasite at 130 and 298 K. No phase transitions were observed over this temperature range. Cell parameters at room temperature are: a= 11.0538(6) Å, c=10.4111(8) Å and V=1101.67(10) ų, and were measured at intervals of about 50 K between 130 and 298 K, resulting in mean axial and volumetric coefficients of thermal expansion (×10^?5K^?1); α _a =1.7(1), α _c =2.1(2), and α _V =5.6(2). Although the unit cell and ^VIIICaO₈ polyhedra show significant positive thermal expansion over this temperature range, the silicate octahedron, sulfate tetrahedron, and carbonate group show zero or negative thermal expansion, with α _V (^VISiO₆) = ?0.6 ± 1.1, α _V (^IVSO₄)=?5.8 ± 1.4, and α _R (C–O)= 0.0 ± 1.8 (×10^?5 K^?1). Most of the thermal expansion is accommodated by lengthening of the R(O...O) hydrogen bond distances by on average 5σ, although the hydrogen bonds involving hydroxyl sites on ^VISi expand twice as much as those on molecular water, causing the [Ca₃Si(OH)₆(H₂O)₁₂]⁴⁺ columns to expand in diameter more than they move apart over this temperature range. The average Si–OH bond length of the six-coordinated Si atom 〈R(^VISi–OH)〉 in thaumasite is 1.783(1) Å, being about 0.02 Å (?20σ) shorter than ^VISi–OH in the dense hydrous magnesium silicate, phase D, MgSi₂H₂O₆.