衬底上石墨烯制备及改性研究

大面积高质量石墨烯的制备对石墨烯电子特性及石墨烯基纳器件相关研究有重要意义。本文综述了近几年来衬底上制备石墨烯的相关实验以及衬底与石墨烯相互作用研究的重要进展。目前,采用化学气相沉积、外延生长等方法可在衬底表面上制备出较大面积、高质量的石墨烯材料。衬底与石墨烯相互作用和界面间晶格匹配、原子成键及电荷转移等密切相关,其对吸附石墨烯的几何结构、能带结构及电子特性等产生明显影响。实验与理论计算的结合可望加深衬底与石墨烯作用机理的理解,指导衬底上石墨烯制备及改性的进一步研究。     

具有SiC缓冲层的Si衬底上直接沉积碳原子生长石墨烯

石墨烯是近年发现的一种新型多功能材料.在合适的衬底上制备石墨烯成为目前材料制备的一大挑战.本文利用分子束外延(MBE)设备,在Si 衬底上生长高质量的SiC 缓冲层,然后利用直接沉积C原子的方法生长石墨烯,并通过反射式高能电子衍射(RHEED)、拉曼(Raman)光谱和近边X 射线吸收精细结构谱(NEXAFS)等实验技术对不同衬底温度(800、900、1000、1100 °C)生长的薄膜进行结构表征.实验结果表明,在以上衬底温度下都能生长出具有乱层堆垛结构的石墨烯薄膜.当衬底温度升高时,碳原子的活性增强,其成键的能力也增大,从而使形成的石墨烯结晶质量提高.衬底温度为1000 °C时结晶质量最好.其原因可能是当衬底温度较低时,碳原子活性太低不足以形成有序的六方C-sp2环.但过高的衬底温度会使SiC 缓冲层的孔洞缺陷增加,衬底的Si 原子有可能获得足够的能量穿过SiC薄膜的孔洞扩散到衬底表面,与沉积的碳原子反应生成无序的SiC,这一方面会减弱石墨烯的生长,另一方面也会使石墨烯的结晶质量变差.     

新型石墨烯基LED器件：从生长机理到器件特性

III族氮化物因具有禁带宽度大、击穿电压高、电子饱和漂移速度大、稳定性高等优异特性而广泛应用在发光二极管(LED)、激光器以及高频器件中。目前III族氮化物薄膜通常是异质外延生长在蓝宝石衬底表面,但是由于蓝宝石与III族氮化物之间存在较大的晶格失配与热失配,使得外延生长的III族氮化物内部存在较大的应力与较高的位错密度,严重影响了器件性能;与此同时,蓝宝石衬底热导率差,限制了其在大功率器件方面的应用。近年来研究发现,石墨烯作为外延生长缓冲层,能够有效解决蓝宝石衬底与外延III族氮化物薄膜之间由于晶格失配和热失配导致的高应力与高位错密度等问题,进而获得了高品质薄膜,并提升了器件的性能。本文综述了石墨烯/蓝宝石衬底上III族氮化物生长与LED器件构筑的研究现状,着重介绍了本课题组提出的一种新型外延衬底—石墨烯/蓝宝石衬底的特点,阐明了III族氮化物在该新型衬底上的生长机理,总结了其对III族氮化物质量提升的作用,并对其发展前景进行了展望。     

金属衬底在石墨烯化学气相沉积生长中的作用

以过渡金属为催化衬底的化学气相沉积法(Chemical Vapor Deposition，CVD)已经可以制备与机械剥离样品相媲美的石墨烯，是实现石墨烯工业应用的关键技术之一。原子尺度理论研究能够帮助我们深刻理解石墨烯生长机理，为实验现象提供合理的解释，并有可能成为将来实验设计的理论指导。本文从理论计算的角度，总结了各种金属衬底在石墨烯CVD生长过程中的各种作用与相应的机理，包括在催化碳源裂解、降低石墨烯成核密度等，催化加快石墨烯快速生长，修复石墨烯生长过程中产生的缺陷，控制外延生长石墨烯的晶格取向，以及在降温过程中石墨烯褶皱与金属表面台阶束的形成过程等。在本文最后，我们对当前石墨烯生长领域中亟需解决的理论问题进行了深入探讨与展望。     

气相助剂辅助绝缘衬底上石墨烯生长：现状与展望

借助化学气相沉积(chemical vapor deposition,CVD)技术在绝缘衬底上直接生长的石墨烯薄膜,在能源存储/转换等领域有着广阔的应用前景。然而,绝缘衬底表面石墨烯的生长呈现成核密度高、畴区尺寸小、生长速率低等特点,获得的石墨烯薄膜往往具有较高的晶界密度和较低的层数均匀度,严重制约着石墨烯基器件性能的发挥。在反应体系中引入气相助剂可有效降低碳源裂解和石墨烯生长的能垒,从而实现石墨烯品质与生长速率的提升。本文综述气相助剂辅助绝缘衬底上石墨烯制备的方法：首先对绝缘衬底上石墨烯的生长行为进行分析;随后着重介绍几类常见的气相助剂辅助石墨烯生长的策略和机理;最后,总结绝缘衬底上制备高品质石墨烯存在的挑战,并对未来的发展方向进行展望。     

石墨烯表界面化学修饰及其功能调控

石墨烯属于碳纳米材料家族中的一员,是一种单层的二维原子晶体,具有高硬度、高导热性、高载流子迁移率等诸多优良特性,被认为是新一代电子学器件的重要基础材料.近年来我们课题组利用石墨烯的这些优良特性在其表界面化学修饰及其功能调控方面开展了一系列研究工作.我们对石墨烯表界面进行了共价或非共价化学修饰,在一定程度上打开了石墨烯的带隙,并发展了具有传感功能的石墨烯器件.我们还制备了基于石墨烯的纳米电极,发展了新一代分子电子器件的普适性制备方法,实现了单分子器件的功能化.展望未来,以石墨烯为代表的碳基纳米材料将继续在纳电子器件研究领域发挥重要作用.     

石墨烯制备与功能化应用的研究进展

石墨烯作为新型二维原子晶体已掀起了科学界的研究热潮.近年来,石墨烯的研究与产业化发展持续升温,相关材料的制备方法层出不穷.但是,关于石墨烯的可控性生长和功能化应用仍有待于进一步探索,石墨烯的工业化规模生产与相关器件的有效开发成为当前研究的难点和挑战.本文重点阐述了近两年石墨烯领域的最新进展,总结了石墨烯材料的新型制备方法,分析了石墨烯器件的功能化应用,并对石墨烯行业的应用前景与发展趋势进行了展望.     

蓝宝石衬底上化学气相沉积法生长石墨烯

化学气相沉积(CVD)法是制备大面积、高质量石墨烯材料的主要方法之一,但存在衬底转移和碳固溶等问题,本文选用蓝宝石衬底弥补了传统CVD法的不足。利用CVD法在蓝宝石衬底上生长石墨烯材料,研究生长温度对石墨烯表面形貌和晶体质量的影响。原子力显微镜(AFM)、光学显微镜(OM)、拉曼光谱和霍尔测试表明,低温生长有利于保持材料表面的平整度,高温生长有利于提高材料的晶体质量。研究氢气和碳源对蓝宝石衬底表面刻蚀作用机理,发现氢气对蓝宝石衬底有刻蚀作用,而单纯的碳源不能对衬底产生刻蚀效果。在1200 ℃下,直径为50 mm的晶圆级衬底上获得平整度和质量相对较好的石墨烯材料,室温下载流子迁移超过1000 cm²·V^-1·s^-1。     

原子转移氮氧自由基偶合反应制备聚苯乙烯改性的石墨烯

通过原子转移氮氧自由基偶合(ATNRC)反应制备了聚苯乙烯改性的石墨烯. 先将氧化石墨烯酰氯化, 然后与2,2,6,6-四甲基-4-羟基哌啶-1-氧自由基(HTEMPO)进行酯化反应制备HTEMPO 修饰的石墨烯(Graphene-HTEMPO), 通过Graphene-HTEMPO 与原子转移自由基聚合(ATRP)方法制备的Br 封端的聚苯乙烯进行ATNRC 反应, 即可得到聚苯乙烯共价改性的石墨烯(Graphene-g-PS). 热失重分析结果表明聚苯乙烯的接枝率约为6.68 wt%, 从透射电镜照片中也可以明显地看到石墨烯表面的聚苯乙烯. 由于聚苯乙烯的共价接枝, 使得Graphene-g-PS 在氯仿、正己烷、甲苯、甲醇等有机溶剂中具有很好的分散性, 有利于石墨烯的进一步应用.     

新型催化剂载体碳化硅的研究现状

碳化硅（SiC）具有较好的导热性,较强的抗氧化性及很高的机械强度,作为新型催化剂载体在强放热、高腐蚀性、液相催化等反应中有很好的应用前景,近年来受到广泛关注。目前关于SiC载体的研究主要集中在三个方面：（1）高比表面积多孔SiC材料的制备;（2）基于现有商业化低比表面积SiC材料的表面碳化;（3）对SiC载体进行杂原子掺杂等表面功能化。本文中,我们主要对以上三个方面的研究现状做简要综述。重点介绍SiC的结构与物理化学性质,SiC作为新型载体在非均相催化反应中的应用以及基于6H-SiC（0001）衬底的表面化学研究。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径——光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。