A Low-Overhead Energy-Efficient ARQ Protocol for Wireless Sensor Networks

Wireless sensor network （WSN） is a typical kind of low-power and lossy network, in where ARQ （Automatic Repeat reQuest） schemes are often used to improve packets reliability. However, the ARQ related packets may incur significant load and consume more energy. This paper proposes a novel energy efficient ARQ protocol called ARQ＋, which uses the nearest-first scheme and NAK aggregation scheme to reduce the amount and transmission hops of the ARQ related packets. Consequently, the energy consumption is significantly decreased. Theoretical analyses of ARQ＋ on energy consumption, packet arrive ratio and latency are provided. Performance improvement of ARQ＋ is validated by extensive simulations. They both show that ARQ＋ has satisfactory energy efficiency, good packets arriving ratio and reasonable average packet delay comparing to traditional ARQ schemes.     

Enabling Energy Efficient Sensory Data Collection Using Multiple Mobile Sink

Mobile sink is the challenging task for wireless sensor networks （WSNs）. In this paper we propose to design an efficient routing protocol for single mobile sink and multiple mobile sink for data gathering in WSN. In this process, a biased random walk method is used to determine the next position of the sink. Then, a rendezvous point selection with splitting tree technique is used to find the optimal data transmission path. If the sink moves within the range of the rendezvous point, it receives the gathered data and if moved out, it selects a relay node from its neighbours to relay packets from rendezvous point to the sink. Proposed algorithm reduces the signal overhead and improves the triangular routing problem. Here the sink acts as a vehicle and collect the data from the sensor. The results show that the proposed model effectively supports sink mobility with low overhead and delay when compared with Intelligent Agent-based Routing protocol （IAR） and also increases the reliability and delivery ratio when the number of sources increases.     

Recommending Friends Instantly in Location-based Mobile Social Networks

Differently from the general online social network （OSN）, location- based mobile social network （LMSN）, which seamlessly integrates mobile computing and social computing technologies, has unique characteristics of temporal, spatial and social correlation. Recommending friends instantly based on current location of users in the real world has become increasingly popular in LMSN. However, the existing friend recommendation methods based on topological structures of a social network or non-topological information such as similar user profiles cannot well address the instant making friends in the real world. In this article, we analyze users＇ check-in behavior in a real LMSN site named Gowalla. According to this analysis, we present an approach of recommending friends instantly for LMSN users by considering the real-time physical location proximity, offline behavior similarity and friendship network information in the virtual community simultaneously. This approach effectively bridges the gap between the offline behavior of users in the real world and online friendship network information in the virtual community. Finally, we use the real user check-in dataset of Gowalla to verify the effectiveness of our approach.     

SDN-Based Data Offioading for 5G Mobile Networks

The rapid growth of 3G/4G enabled devices such as smartphones and tablets in large numbers has created increased demand formobile data services.Wi-Fi offloading helps satisfy the requirements of data-rich applications and terminals with improved multi-media.Wi-Fi is an essential approach to alleviating mobile data traffic load on a cellular network because it provides extra capaci-ty and improves overall performance.In this paper,we propose an integrated LTE/Wi-Fi architecture with software-defined net-working(SDN)abstraction in mobile backhaul and enhanced components that facilitate the move towards next-generation 5G mo-bile networks.Our proposed architecture enables programmable offloading policies that take into account real-time network condi-tions as well as the status of devices and applications.This mechanism improves overall network performance by deriving real-time policies and steering traffic between cellular and Wi-Fi networks more efficiently.     

MBGM: A Graph-Mining Tool Based on MapReduce and BSP

This paper proposes an analytical mining tool for big graph data based on MapReduce and bulk synchronous parallel （BSP） com puting model. The tool is named Mapreduce and BSP based Graphmining tool （MBGM）. The core of this mining system are four sets of parallel graphmining algorithms programmed in the BSP parallel model and one set of data extractiontransformationload ing （ETE） algorithms implemented in MapReduce. To invoke these algorithm sets, we designed a workflow engine which optimized for cloud computing. Finally, a welldesigned data management function enables users to view, delete and input data in the Ha doop distributed file system （HDFS）. Experiments on artificial data show that the components of graphmining algorithm in MBGM are efficient.     

Virtualized Wireless SDNs： Modelling Delay Through the Use of Stochastic Network Calculus

Software-defined networks(SDN)have attracted much attention recently because of their flexibility in terms of network manage-ment.Increasingly,SDN is being introduced into wireless networks to form wireless SDN.One enabling technology for wirelessSDN is network virtualization,which logically divides one wireless network element,such as a base station,into multiple slices,and each slice serving as a standalone virtual BS.In this way,one physical mobile wireless network can be partitioned into multi-ple virtual networks in a software-defined manner.Wireless virtual networks comprising virtual base stations also need to provideQoS to mobile end-user services in the same context as their physical hosting networks.One key QoS parameter is delay.This pa-per presents a delay model for software-defined wireless virtual networks.Network calculus is used in the modelling.In particu-lar,stochastic network calculus,which describes more realistic models than deterministic network calculus,is used.The model en-ables theoretical investigation of wireless SDN,which is largely dominated by either algorithms or prototype implementations.     

Reclaiming the Efficiency of Opportunistic Routing in Wireless Multi-Hop Networks

Opportunistic routing（OR） is an effective way to guarantee transmission reliability in wireless multi-hop networks.However,little research focuses on transmission efficiency.Thus,an analytical model based on open queuing network with Markov chains was proposed to evaluate the efficiency.By analyzing two typical ORs,we find duplicate transmission and collision avoidance overhead are the root reasons behind inefficiency.Therefore,a new scheme called dual priority cooperative opportunistic routing（DPCOR） was proposed.In DPCOR,forwarding candidates are configured with dual priority,which enables the network to classify forwarding candidates more effectively so as to reduce the back-off time and obtain more diversity gain.Theoretical analysis and simulation results show DPCOR achieves significant performance improvement with less time overhead compared with traditional routings and typical ORs.     

Software Radio——Software Radio： A Review of Design Considerations and Digital Hardware Choices

This paper reviews the requirements for Software Defined Radio （SDR） systems for high-speed wireless applications and compares how well the different technology choices available- from ASICs, FPGAs to digital signal processors （DSPs） and general purpose processors （GPPs） - meet them.     

EEFA： Energy Efficiency Frame Aggregation Scheduling Algorithm for IEEE 802.11n Wireless Network

Packet size is restricted due to the error-prone wireless channel which drops the network energy utilization. Furthermore, the frequent packet retransmissions also lead to energy waste. In order to improve the energy efficiency of wireless networks and save the energy of wireless devices, EEFA （Energy Efficiency Frame Aggregation）, a frame aggregation based energy-efficient scheduling algorithm for IEEE 802.11n wireless network, is proposed. EEFA changes the size of aggregated frame dynamically according to the frame error rate, so as to ensure the data transmission and retransmissions completed during the TXOP and reduce energy consumption of channel contention. NS2 simulation results show that EEFA algorithm achieves better performance than the original frame-aggregation algorithm.     

Load Balancing Fat-Tree on Long-Lived Flows： Avoiding Congestion in a Data Center Network

In a data center network(DCN),load balancing is required when servers transfer data on the same path.This is necessary toavoid congestion.Load balancing is challenged by the dynamic transferral of demands and complex routing control.Because ofthe distributed nature of a traditional network,previous research on load balancing has mostly focused on improving the perfor-mance of the local network;thus,the load has not been optimally balanced across the entire network.In this paper,we propose anovel dynamic load-balancing algorithm for fat-tree.This algorithm avoids congestions to the great possible extent by searching fornon-conflicting paths in a centralized way.We implement the algorithm in the popular software-defined networking architectureand evaluate the algorithm’s performance on the Mininet platform.The results show that our algorithm has higher bisection band-width than the traditional equal-cost multi-path load-balancing algorithm and thus more effectively avoids congestion.     

Service Parameter Exposure and Dynamic Service Negotiation in SDN Environments

Software-defined networking(SDN)is a generic term and one of the major interests of the telecoms industry(and beyond)over thepast two years.However,defining SDN is a somewhat controversial exercise.The claimed flexibility,as well as other presumed as-sets of SDN,should be carefully investigated.In particular,the use of SDN to dynamically provision network services suggests theintroduction of a certain level of automation in the overall network service delivery process,from service parameter negotiation todelivery and operation.This paper aims to clarify the SDN landscape and focuses on two main aspects of the SDN framework:net-work abstraction,and dynamic parameter exposure and negotiation.     

An Overview of Internet of Vehicles

The new era of the Internet of Things is driving the evolution of conventional Vehicle Ad-hoc Networks into the lnternet of Vehicles （IoV）. With the rapid development of computation and communication technologies, loV promises huge commercial interest and research value, thereby attracting a large number of companies and researchers. This paper proposes an abstract network model of the IoV, discusses the technologies required to create the IoV, presents different applications based on certain currently existing technologies, provides several open research challenges and describes essential future research in the area of loV.     

应力和电阻率可控的适用于高品质因子MEMS器件的原位掺硼LPCVD多晶硅薄膜

The simultaneous control of residual stress and resistivity of polysilicon thin films by adjusting the deposition parameters and annealing conditions is studied. In situ boron doped polysilicon thin films deposited at 520 ℃ by low pressure chemical vapor deposition （LPCVD） are amorphous with relatively large compressive residual stress and high resistivity. Annealing the amorphous films in a temperature range of 600-800 ℃ gives polysilicon films nearly zero-stress and relatively low resistivity. The low residual stress and low resistivity make the polysilicon films attractive for potential applications in micro-electro-mechanical-systems （MEMS） devices, especially in high resonance frequency （high-f） and high quality factor （high-Q） MEMS resonators. In addition, polysilicon thin films deposited at 570 ℃ and those without the post annealing process have low resistivities of 2-5 mΩ·cm. These reported approaches avoid the high temperature annealing process （〉 1000 ℃）, and the promising properties of these films make them suitable for high-Q and high-f MEMS devices.     

A low power 3-5 GHz CMOS UWB receiver front-end

A novel low power RF receiver front-end for 3-5 GHz UWB is presented. Designed in the 0.13μm CMOS process, the direct conversion receiver features a wideband balun-coupled noise cancelling transconductance input stage, followed by quadrature passive mixers and transimpedance loading amplifiers. Measurement results show that the receiver achieves an input return loss below -8.5 dB across the 3.1-4.7 GHz frequency range, maximum voltage conversion gain of 27 dB, minimum noise figure of 4 dB, IIP3 of -11.5 dBm, and IIP2 of 33 dBm. Working under 1.2 V supply voltage, the receiver consumes total current of 18 mA including 10 mA by on-chip quadrature LO signal generation and buffer circuits. The chip area with pads is 1.1 × 1.5 mm^2.     

适用于双金属栅集成的TaN湿法腐蚀

Wet-etch etchants and the TaN film method for dual-metal-gate integration are investigated. Both HF/HN O3/H2O and NH4OH/H2O2 solutions can etch TaN effectively, but poor selectivity to the gate dielectric for the HF/HNO3/H2O solution due to HF being included in HF/HNO3/H2O, and the fact that TaN is difficult to etch in the NH4OH/H2O2 solution at the first stage due to the thin TaOxNy layer on the TaN surface, mean that they are difficult to individually apply to dual-metal-gate integration. A two-step wet etching strategy using the HF/HNO3/H2O solution first and the NH4OH/H2O2 solution later can fully remove thin TaN film with a photo-resist mask and has high selectivity to the HfSiON dielectric film underneath. High-k dielectric film surfaces are smooth after wet etching of the TaN metal gate and MOSCAPs show well-behaved C-V and Jg-Vg characteristics, which all prove that the wet etching of TaN has little impact on electrical performance and can be applied to dual-metal-gate integration technology for removing the first TaN metal gate in the PMOS region.     

基于非线性DAC的高速直接数字频率合成器

This paper presents a high speed ROM-less direct digital frequency synthesizer （DDFS） which has a phase resolution of 32 bits and a magnitude resolution of 10 bits. A 10-bit nonlinear segmented DAC is used in place of the ROM look-up table for phase-to-sine amplitude conversion and the linear DAC in a conventional DDFS. The design procedure for implementing the nonlinear DAC is presented. To ensure high speed, current mode logic （CML） is used. The chip is implemented in Chartered 0.35μm COMS technology with active area of 2.0 × 2.5 mm^2 and total power consumption of 400 mW at a single 3.3 V supply voltage. The maximum operating frequency is 850 MHz at room temperature and 1.0 GHz at 0℃.     

掉电后SRAM防数据残留物理攻击的安全策略

This paper presents a security strategy for resisting a physical attack utilizing data remanence in powered- off static random access memory （SRAM）. Based on the mechanism of physical attack to data remanence, the strategy intends to erase data remanence in memory cells once the power supply is removed, which disturbs attackers trying to steal the right information. Novel on-chip secure circuits including secure power supply and erase transistor are integrated into conventional SRAM to realize erase operation. Implemented in 0.25μm Huahong-NEC CMOS technology, an SRAM exploiting the proposed security strategy shows the erase operation is accomplished within 0.2 μs and data remanence is successfully eliminated. Compared with conventional SRAM, the retentive time of data remanence is reduced by 82% while the operation power consumption only increases by 7%.     

一种应用于频率综合器的全差分电荷泵的设计与噪声分析

A fully-differential charge pump（FDCP）with perfect current matching and low output current noise is realized for phase-locked loops（PLLs）.An easily stable common-mode feedback（CMFB）circuit which can handle high input voltage swing is proposed.Current mismatch and current noise contribution from the CMFB circuit is minimized.In order to optimize PLL phase noise,the output current noise of the FDCP is analyzed in detail and calculated with the sampling principle.The calculation result agrees well with the simulation.Based on the noise analysis,many methods to lower output current noise of the FDCP are discussed.The fully-differential charge pump is integrated into a 1–2 GHz frequency synthesizer and fabricated in an SMIC CMOS 0.18μm process.The measured output reference spur is–64 dBc to–69 dBc.The in-band and out-band phase noise is–95 dBc/Hz at 3 kHz frequency offset and–123 dBc/Hz at 1 MHz frequency offset respectively.     

Software-Defined Cellular Mobile Network Solutions

The emergency relating to software-defined networking(SDN),especially in terms of the prototype associated with OpenFlow,pro-vides new possibilities for innovating on network design.Researchers have started to extend SDN to cellular networks.Such newprogrammable architecture is beneficial to the evolution of mobile networks and allows operators to provide better services.Thetypical cellular network comprises radio access network(RAN)and core network(CN);hence,the technique roadmap diverges intwo ways.In this paper,we investigate SoftRAN,the latest SDN solution for RAN,and SoftCell and MobileFlow,the latest solu-tions for CN.We also define a series of control functions for CROWD.Unlike in the other literature,we emphasize only software-defined cellular network solutions and specifications in order to provide possible research directions.