Directionally sensitive weighted adaptive multivariate CUSUM mean charts

In many service and manufacturing industries, process monitoring involves multivariate data, instead of univariate data. In these situations, multivariate charts are employed for process monitoring. Very often when the mean vector shifts to an out-of-control situation, the exact shift size is unknown; hence, multivariate charts for monitoring a range of the mean shift sizes in the mean vector are adopted. In this paper, directionally sensitive weighted adaptive multivariate CUSUM charts are developed for monitoring a range of the mean shift sizes. Directionally sensitive charts are useful in situations where the aim lies in monitoring either an increasing or a decreasing shift in the mean vector of the quality characteristics of interest. The Monte Carlo simulation is used to compute the run length characteristics in comparing the sensitivities of the proposed and existing multivariate CUSUM charts. In general, the directionally sensitive and weighted adaptive features enhance the sensitivities of the proposed multivariate CUSUM charts in comparison with the existing multivariate CUSUM charts without the adaptive feature or those that are directionally invariant. It is also found that the variable sampling interval feature enhances the sensitivities of the proposed and existing charts as compared to their fixed sampling interval counterparts. The implementation of the proposed charts in detecting upward and downward shifts in the in-control process mean vector is demonstrated using two different datasets.     

Distribution‐free mixed cumulative sum‐exponentially weighted moving average control charts for detecting mean shifts

In this paper, we propose distribution‐free mixed cumulative sum‐exponentially weighted moving average (CUSUM‐EWMA) and exponentially weighted moving average‐cumulative sum (EWMA‐CUSUM) control charts based on the Wilcoxon rank‐sum test for detecting process mean shifts without any distributional assumption of the underlying quality process. The performances of the proposed charts are measured through the average run‐length, relative mean index, average extra quadratic loss, and average ratio of the average run‐length and performance comparison index. It is found that the proposed charts perform better than its counterparts considered in this paper under non‐normal distributions and outperform the classical mixed CUSUM‐EWMA and EWMA‐CUSUM charts in many cases under the normal distribution. The effect of the phase I sample size is also investigated on the phase II performance of the proposed charts. A numerical illustration is given to demonstrate the implementation and simplicity of the proposed charts.     

On mixed memory control charts based on auxiliary information for efficient process monitoring

Control charts are popular monitoring tools in statistical process control toolkit. These are used to identify assignable causes in the process parameters (location and/or dispersion). These assignable causes result in a shift in the process parameter(s). The shift can be categorized into three sizes (small, moderate, and large). Memory control charts such as the exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) charts are effective for identifying small-to-moderate shift(s) in the process. Likewise, mixed memory control charts are useful for efficient process monitoring. In this study, we have proposed two new mixed memory control charts based on auxiliary information named MxMEC and MxMCE control charts to improve the efficiency of these mixed charts. The MxMEC chart is a merger of the auxiliary information based MxEWMA chart and the classical CUSUM chart. Likewise, the MxMCE chart integrates the auxiliary information based MxCUSUM with the classical EWMA chart. The proposed MxMEC and MxMCE charts are evaluated through famous performance measures including average run length, extra quadratic loss, relative average run length, and performance comparison index. The performance of the study proposals is compared with the existing counterparts such as the classical CUSUM and EWMA, MxCUSUM, MxEWMA, MEC, MCE, and runs rules-based CUSUM charts. The comparisons revealed the superiority of the proposed charts against other competing charts particularly for small-to-moderate shifts in the process location. Finally, a real-life data is used to show the implementation procedure of the proposed charts in practical situations.     

An efficient adaptive EWMA control chart for monitoring the process mean

In recent years, the memory‐type control charts—exponentially weighted moving average (EWMA) and cumulative sum (CUSUM)—along with the adaptive and dual control‐charting structures have received considerable attention because of their excellent ability in providing an overall good detection over a range of mean‐shift sizes. These adaptive memory‐type control charts include the adaptive exponentially weighted moving average (AEWMA), dual CUSUM, and adaptive CUSUM charts. In this paper, we propose a new AEWMA chart for efficiently monitoring the process mean. The idea is to first design an unbiased estimator of the mean shift using the EWMA statistic and then adaptively update the smoothing constant of the EWMA chart. The run length profiles of the proposed AEWMA chart are computed using extensive Monte Carlo simulations. Based on a comprehensive comparative study, it turns out that the proposed AEWMA chart performs better than the existing AEWMA, adaptive CUSUM, dual CUSUM, and Shewhart‐CUSUM charts, in terms of offering more balanced protection against mean shifts of different sizes. An example is also used to explain the working of the existing and proposed control charts.     

Surveillance of Nonhomogeneous Poisson Processes

The use of varying sample size monitoring techniques for Poisson count data has drawn a great deal of attention in recent years. Specifically, these methods have been used in public health surveillance, manufacturing, and safety monitoring. A number of approaches have been proposed, from the traditional Shewhart charts to cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) methods. It is convenient to use techniques based on statistics that are invariant to the units of measurement since in most cases these units are arbitrarily selected. A few of the methods reviewed in our expository article are not inherently invariant, but most are easily modified to be invariant. Most importantly, if methods are invariant to the choice of units of measurement, they can be applied in situations where the in-control Poisson mean varies over time, even if there is no associated varying sample size. Several examples are discussed to highlight the promising uses of invariant Poisson control charting methods in this much broader set of applications, which includes risk-adjusted monitoring in healthcare, public health surveillance, and monitoring of continuous time nonhomogeneous Poisson processes. A new chart design method based on extensive online simulation is highlighted.     

An enhanced approach for the progressive mean control charts

To maintain and improve the quality of the processes, control charts play an important role for reduction of variation. To detect large shifts in the process parameters, Shewhart control charts are commonly applied but for small shifts, exponentially weighted moving averages (EWMA), cumulative sum (CUSUM), double exponentially weighted moving average (DEWMA), double CUSUM, moving average (MA), double moving average (DMA), and progressive mean (PM) control charts, are used. This study proposes double progressive mean (DPM) and optimal DPM control charts to enhance the performance of the PM chart. As the proposed DPM control charts use information sequentially, hence their performance is compared with natural competitors EWMA, CUSUM, DEWMA, double CUSUM, MA, DMA, and PM control charts. Run length and its different properties are evaluated to compare the performance of the proposed charts and counterparts. Results reveal that proposed optimal DPM outperforms the other charts. An example related to voltage on fixed capacitance level is also provided to illustrate the proposed charts.     

New Synthetic EWMA and Synthetic CUSUM Control Charts for Monitoring the Process Mean

Exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) control charts are potentially powerful statistical process monitoring tools because of their excellent speed in detecting small to moderate persistent process shifts. Recently, synthetic EWMA (SynEWMA) and synthetic CUSUM (SynCUSUM) control charts have been proposed based on simple random sampling (SRS) by integrating the EWMA and CUSUM control charts with the conforming run length control chart, respectively. These synthetic control charts provide overall superior detection over a range of mean shift sizes. In this article, we propose new SynEWMA and SynCUSUM control charts based on ranked set sampling (RSS) and median RSS (MRSS) schemes, named SynEWMA‐RSS and SynEWMA‐MRSS charts, respectively, for monitoring the process mean. Extensive Monte Carlo simulations are used to estimate the run length characteristics of the proposed control charts. The run length performances of these control charts are compared with their existing powerful counterparts based on SRS, RSS and MRSS schemes. It turns out that the proposed charts perform uniformly better than the Shewhart, optimal synthetic, optimal EWMA, optimal CUSUM, near‐optimal SynEWMA, near‐optimal SynCUSUM control charts based on SRS, and combined Shewhart‐EWMA control charts based on RSS and MRSS schemes. A similar trend is observed when constructing the proposed control charts based on imperfect RSS schemes. An application to a real data is also provided to demonstrate the implementations of the proposed SynEWMA and SynCUSUM control charts. Copyright © 2014 John Wiley & Sons, Ltd.     

New Synthetic CUSUM and Synthetic EWMA Control Charts for Monitoring the Process Mean using Auxiliary Information

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are potentially powerful process monitoring tool because of their excellent speed in detecting small to moderate shifts in the process parameters. These control charts can be further improved by integrating them with the conforming run length control chart, resulting in the synthetic CUSUM (SynCUSUM) and synthetic EWMA (SynEWMA) charts. In this paper, we enhance the detection abilities of the SynCUSUM and SynEWMA charts using the auxiliary information. With suitable assumptions, the proposed control charts encompass the existing SynCUSUM, SynEWMA, CUSUM, and EWMA charts. Extensive Monte Carlo simulations are used to study the run length profiles of the proposed control charts. It turns out that the proposed near‐optimal control charts with the auxiliary information perform uniformly and substantially better than the existing near‐optimal SynCUSUM, SynEWMA, CUSUM, and EWMA charts. The proposed and existing control charts are also illustrated with the help of an example. Copyright © 2017 John Wiley & Sons, Ltd.     

A new dual CUSUM mean chart

The conventional cumulative sum (CUSUM) chart is usually designed based on a known shift size. In usual practice, shift size is often unknown and can be assumed to vary within an interval. With such a range of shift size, the dual CUSUM (DCUSUM) chart provides more sensitivity than the CUSUM chart. In this paper, we propose dual Crosier CUSUM (DCCUSUM) charts with and without fast initial response features to efficiently monitor the infrequent changes in the mean of a normally distributed process. Monte Carlo simulations are used to compute the run length characteristics of one‐sided and two‐sided DCCUSUM charts. These run length characteristics are compared with those of the CUSUM, Crosier CUSUM, Shewhart‐CUSUM, and DCUSUM charts in terms of the integral relative average run length. It turns out that the proposed chart shows better performance when detecting a range of mean shift sizes. A real dataset is considered to illustrate the implementation of existing and proposed charts.     

Mixed Exponentially Weighted Moving Average–Cumulative Sum Charts for Process Monitoring

The control chart is a very popular tool of statistical process control. It is used to determine the existence of special cause variation to remove it so that the process may be brought in statistical control. Shewhart‐type control charts are sensitive for large disturbances in the process, whereas cumulative sum (CUSUM)–type and exponentially weighted moving average (EWMA)–type control charts are intended to spot small and moderate disturbances. In this article, we proposed a mixed EWMA–CUSUM control chart for detecting a shift in the process mean and evaluated its average run lengths. Comparisons of the proposed control chart were made with some representative control charts including the classical CUSUM, classical EWMA, fast initial response CUSUM, fast initial response EWMA, adaptive CUSUM with EWMA‐based shift estimator, weighted CUSUM and runs rules–based CUSUM and EWMA. The comparisons revealed that mixing the two charts makes the proposed scheme even more sensitive to the small shifts in the process mean than the other schemes designed for detecting small shifts. Copyright © 2012 John Wiley & Sons, Ltd.     

An Efficient Shewhart‐Type Control Chart to Monitor Moderate Size Shifts in the Process Mean in Phase II

According to Shewhart, control charts are not very sensitive to small and moderate size process shifts that is why those are less likely to be effective in Phase II. So to monitor small or moderate size process shifts in Phase II, cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are considered as alternate of Shewhart control charts. In this paper, a Shewhart‐type control chart is proposed by using difference‐in‐difference estimator in order to detect moderate size shifts in process mean in Phase II. The performance of the proposed control chart is studied for known and unknown cases separately through a detailed simulation study. For the unknown case, instead of using reference samples of small sizes, large size reference sample(s) is used as we can see in some of nonparametric control chart articles. In an illustrative example, the proposed control charts are constructed for both known and unknown cases along with Shewhart ‐chart, classical EWMA, and CUSUM control charts. In this application, the proposed chart is found comprehensively better than not only Shewhart ‐chart but also EWMA and CUSUM control charts. By comparing average run length, the proposed control chart is found always better than Shewhart ‐chart and in general better than classical EWMA and CUSUM control charts when we have relatively higher values of correlation coefficients and detection of the moderate shifts in the process mean is concerned. Copyright © 2015 John Wiley & Sons, Ltd.     

Improving the Performance of Combined Shewhart–Cumulative Sum Control Charts

For an improved monitoring of process parameters, it is generally desirable to have efficient designs of control charting structures. The addition of Shewhart control limits to the cumulative sum (CUSUM) control chart is a simple monitoring scheme sensitive to wide range of mean shifts. To improve the detection ability of the combined Shewhart–CUSUM control chart to off‐target processes, we developed the scheme using ranked set sampling instead of the traditional simple random sampling. We investigated the run length properties of the Shewhart–CUSUM with ranked set samples and compared their performance with certain established control charts. It is revealed that the proposed schemes offer better protection against different types of mean shifts than the existing counterparts including classical Shewhart, classical CUSUM, classical combined Shewhart–CUSUM, adaptive CUSUM, double CUSUM, three simultaneous CUSUM, combined Shewhart‐weighted CUSUM, runs rules‐based CUSUM and the mixed exponentially weighted moving average‐CUSUM. Applications on real data sets are also given to demonstrate the implementation simplicity of the proposed schemes Copyright © 2012 John Wiley & Sons, Ltd.     

Progressive Mean Control Chart for Monitoring Process Location Parameter

Control charts are widely used for process monitoring. They show whether the variation is due to common causes or whether some of the variation is due to special causes. To detect large shifts in the process, Shewhart‐type control charts are preferred. Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are generally used to detect small and moderate shifts. Shewhart‐type control charts (without additional tests) use only current information to detect special causes, whereas CUSUM and EWMA control charts also use past information. In this article, we proposed a control chart called progressive mean (PM) control chart, in which a PM is used as a plotting statistic. The proposed chart is designed such that it uses not only the current information but also the past information. Therefore, the proposed chart is a natural competitor for the classical CUSUM, the classical EWMA and some recent modifications of these two charts. The conclusion of this article is that the performance of the proposed PM chart is superior to the compared ones for small and moderate shifts, and its performance for large shifts is better (in terms of the average run length). Copyright © 2012 John Wiley & Sons, Ltd.     

Weighted adaptive multivariate CUSUM control charts

An adaptive multivariate cumulative sum (AMCUSUM) control chart has received considerable attention because of its ability to dynamically adjust the reference parameter whereby achieving a better performance over a range of mean shifts than the conventional multivariate cumulative sum (CUSUM) charts. In this paper, we introduce a progressive mean–based estimator of the process mean shift and then use it to devise new weighted AMCUSUM control charts for efficiently monitoring the process mean. These control charts are easy to design and implement in a computerized environment compared with their existing counterparts. Monte Carlo simulations are used to estimate the run‐length characteristics of the proposed control charts. The run‐length comparison results show that the weighted AMCUSUM charts perform substantially and uniformly better than the classical multivariate CUSUM and AMCUSUM charts in detecting a range of mean shifts. An example is used to illustrate the working of existing and proposed multivariate CUSUM control charts.     

Mixed Cumulative Sum–Exponentially Weighted Moving Average Control Charts: An Efficient Way of Monitoring Process Location

Shewhart, exponentially weighted moving average (EWMA), and cumulative sum (CUSUM) charts are famous statistical tools, to handle special causes and to bring the process back in statistical control. Shewhart charts are useful to detect large shifts, whereas EWMA and CUSUM are more sensitive for small to moderate shifts. In this study, we propose a new control chart, named mixed CUSUM‐EWMA chart, which is used to monitor the location of a process. The performance of the proposed mixed CUSUM‐EWMA control chart is measured through the average run length, extra quadratic loss, relative average run length, and a performance comparison index study. Comparisons are made with some existing charts from the literature. An example with real data is also given for practical considerations. Copyright © 2014 John Wiley & Sons, Ltd.     

Hotelling's T2 control chart with adaptive sample sizes

Some quality control schemes have been developed when several related quality characteristics are to be monitored: simultaneous X¯ charts, Hotelling's T² chart, multivariate CUSUM and multivariate EWMA. Hotelling's T² control chart has the advantage of its simplicity but it is slow in detecting small process shifts. The latest developments in variable sample sizes for univariate control charts are applied in this paper to define an adaptive sample sizes T² control chart. As occurs in the univariate case the ARL improvements are very important particularly for small process shifts. An example is given to illustrate the use of the proposed scheme.     

New CUSUM and Shewhart-CUSUM charts for monitoring the process mean

The CUmulative SUM (CUSUM) charts have sensitive nature against small and moderate shifts that occur in the process parameter(s). In this article, we propose the CUSUM and combined Shewhart-CUSUM charts for monitoring the process mean using the best linear unbiased estimator of the location parameter based on ordered double-ranked set sampling (RSS) scheme, where the CUSUM chart refers to the Crosier's CUSUM chart. The run-length characteristics of the proposed CUSUM charts are computed with the Monte Carlo simulations. The run-length profiles of the proposed CUSUM charts are compared with those of the CUSUM charts based on simple random sampling, RSS, and ordered RSS schemes. It is found that the proposed CUSUM charts uniformly outperform their existing counterparts when detecting all different kinds of shifts in the process mean. A real data set is also considered to explain the implementation of the proposed CUSUM charts.     

Efficient adaptive CUSUM control charts based on generalized likelihood ratio test to monitor process dispersion shift

In practice, a shift in the process parameters (location and/or dispersion) is unknown in prior and cannot be diagnosed precisely with the classical cumulative sum (CUSUM) control chart. To overcome this issue, this study proposed two adaptive CUSUM (ACUSUM) control charts. The proposed control charts utilized linear weighted function that is inspired by generalized likelihood ration test (GLRT) to monitor small and certain range of shift in the process dispersion. In more details, the proposed control charts methodologies are based on GLRT, exponentially weight moving average statistic, and score functions. To obtain the run length of the proposed control charts for performance assessment, algorithms are designed in MATLAB based on Monte Carlo simulation technique. Further, average run length (ARL) is used as a performance measure tool to compare the control charts performance for a single shift. For certain range of shift, extra quadratic loss function, relative ARL, and performance comparison index performance measures based on ARL are calculated. Some existing control charts are used for comparison purpose. The proposed control charts show outstanding capability to detect out-of-control signal against these control charts. Moreover, real-life data of inside diameter of cylinder bore in an engine block are used to reveal the practicality and worth of the proposed control charts relative to other control charts.     

New control charts for monitoring the Weibull percentiles under complete data and Type‐II censoring

In this paper, we propose 3 new control charts for monitoring the lower Weibull percentiles under complete data and Type‐II censoring. In transforming the Weibull distribution to the smallest extreme value distribution, Pascaul et al (2017) presented an exponentially weighted moving average (EWMA) control chart, hereafter referred to as EWMA‐SEV‐Q, based on a pivotal quantity conditioned on ancillary statistics. We extended their concept to construct a cumulative sum (CUSUM) control chart denoted by CUSUM‐SEV‐Q. We provide more insights of the statistical properties of the monitoring statistic. Additionally, in transforming a Weibull distribution to a standard normal distribution, we propose EWMA and CUSUM control charts, denoted as EWMA‐YP and CUSUM‐YP, respectively, based on a pivotal quantity for monitoring the Weibull percentiles with complete data. With complete data, the EWMA‐YP and CUSUM‐YP control charts perform better than the EWMA‐SEV‐Q and CUSUM‐SEV‐Q control charts in terms of average run length. In Type‐II censoring, the EWMA‐SEV‐Q chart is slightly better than the CUSUM‐SEV‐Q chart in terms of average run length. Two numerical examples are used to illustrate the applications of the proposed control charts.     

Improved Fast Initial Response Features for Exponentially Weighted Moving Average and Cumulative Sum Control Charts

Exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) control charts have found extensive applications in industry. The sensitivity of these quality control schemes can be increased by using fast initial response (FIR) features. In this paper, we introduce some improved FIR features for EWMA and CUSUM control charts and evaluate their performance in terms of average run length. We compare the proposed FIR‐based EWMA and CUSUM control schemes with some existing control schemes, that is, EWMA, FIR‐EWMA, CUSUM, and FIR‐CUSUM. It is noteworthy that the proposed control schemes are uniformly better than the other schemes considered here. An illustrative example is also given to demonstrate the implementation of the proposed control schemes. Copyright © 2013 John Wiley & Sons, Ltd.