水体中痕量挥发性有机物单体碳同位素组成分析

将固相微萃取(SPME)技术与冷阱富集系统相结合,对水体中痕量挥发性有机物进行了单体碳同位素分析,方法检测限较常规SPME提高了一个数量级。在优化的条件下,对20 μg/L的三氯乙烯/四氯乙烯和10 μg/L的苯/甲苯水溶液进行了单体碳同位素分析,相比于纯溶剂(液相)碳同位素值,顶空(气相)同位素分析误差不超过0.5‰,而样本标准偏差为0.3‰。对某受四氯乙烯污染的北京地下水进行了同位素测定,近污染源点(B408)与远污染源点(B230)四氯乙烯的碳同位素值(δ13C)分别为 -37.8‰和-34.45‰     

动态微波辅助顶空固相微萃取-气相色谱-质谱法测定芹菜叶中的化学成分

采用动态微波辅助顶空固相微萃取结合气相色谱-质谱法测定芹菜叶中的挥发性和半挥发性化学成分。对水蒸气蒸馏、顶空固相微萃取、微波辅助顶空固相微萃取、动态微波辅助顶空固相微萃取等4种不同的前处理方法进行了比较,通过气相色谱-质谱分析,分别鉴定出20,17,36,41种化学成分,主要化合物为α-月桂烯、柠檬烯、β-顺式罗勒烯、β-芹子烯和(Z)-3-己烯-1-醇等。结果表明:动态微波辅助顶空固相微萃取是一种简单、快速、易操作,无需净化步骤,消耗样品量少,对于沸点较高的半挥发性物质的萃取效果优于微波辅助顶空固相微萃取的方法,可用于分析各类植物中的挥发性和半挥发性化学成分。     

固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物

应用固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物的含量。优化的试验条件如下:1萃取纤维为DVB/CAR/PDMS;2萃取温度为25℃;3顶空体积为9mL;4萃取时间为10min;5解吸温度为200℃;6解吸时间为3min。在气相色谱分离中用VF-624MS柱为固定相,在质谱分析中采用全扫描模式。53种挥发性有机污染物在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.001~0.130μg·L-1之间。方法用于实际水样的分析,加标回收率在75.9%~107%之间,测定值的相对标准偏差(n=5)在0.5%~18%之间。     

顶空液相微萃取/气相色谱-质谱对中药枳壳中有机挥发物的快速分析

建立了顶空液相微萃取/气相色谱-质谱联用测定中药枳壳中有机挥发物的方法.在顶空液相微萃取实验条件优化的基础上,确定了最佳实验条件:以正辛烷作为有机萃取剂,体积为2 μL,样品用量为0.3 g,液滴距离样品表面0.8 cm处,萃取8 min后直接进样.与固相微萃取/气相色谱-质谱法相比,顶空液相微萃取法定性了30种成分,固相微萃取法定性了24种成分,顶空液相微萃取法操作简单、快速,实验结果灵敏度更高,且萃取效率高,重复性好,可用于中药枳壳中有机挥发物的快速分析.     

固相微萃取-气相色谱联用技术测定柠檬酸中的有机挥发性杂质

利用顶空固相微萃取．气相色谱联用技术(HS-SPME-GC)，以100μm聚二甲基硅氧烷(PDMS)萃取头分析柠檬酸中的5种有机挥发性杂质，并对萃取温度、吸附时间、解吸时间和盐析作用进行了研究。结果显示，该方法具有较好的精密度和较宽的线性范围，样品加标回收率92．4％-103．5％，检出限完全满足美国药典USP23对柠檬酸中有机挥发性杂质的限量要求。     

水中有机污染物前处理方法进展

综述了水样中有机污染物前处理方法的进展情况；重点介绍液-液萃取、固相萃取、液相微萃取、膜萃取和顶空处理技术5种前处理方法的一些基本情况及其优缺点。     

顶空固相微萃取-气相色谱-质谱联用分析麦冬中有机挥发物

采用顶空固相微萃取-气相色谱-质谱联用(HS-SPME-GC-MS)分析麦冬中挥发性成分,对萃取温度、时间、脱附时间及样品用量等条件进行了优化,方法所得结果与同时蒸馏萃取-气相色谱-质谱联用(SDE-GC-MS)方法比较,相对含量较高的成分基本一致.固相微萃取方法可应用于麦冬中有机挥发性成分的快速分析.     

顶空固相微萃取-气质联用技术分析5种荷花的挥发性成分

采用顶空固相微萃取-气相色谱质谱联用(HS-SPME-GC-MS)技术分析测定了5个品种荷花中的挥发性成分.考察了不同萃取头和萃取温度对荷花挥发性成分萃取的影响,选用65μm PDMS/DVB SPME萃取头和25℃室温萃取荷花中的挥发性成分得到较好的萃取效果.应用峰面积归一化法测定各挥发性成分的相对含量,5个品种共鉴...     

饮用水中有机污染物检测方法研究进展

介绍水中有机污染物的富集方法如顶空法、萃取法、固相微萃取法、液相微萃取法、棒吸附萃取等,对饮用水中有机污染物的检测技术如气相色谱法、气相色谱–质谱联用法、液相色谱法、液相色谱–质联用法等进行了综述并对检测技术的发展趋势进行了展望。     

顶空固相微萃取气相-质谱法测定纺织品中防虫蛀剂的残留

 采用顶空固相微萃取技术和气相 质谱联用技术对纺织品中的挥发性防虫蛀剂的残留进行了测定。该方法对挥发性二氯苯和萘的检测限量为 1μg/kg ,回收率为 83 6 %～ 115 2 % ,相对标准偏差为 8 1%～ 9 8%。     

Analysis of Volatile Compounds in Radix Bupleuri Injection by GC–MS–MS

Static headspace sampling, headspace solid-phase microextraction, and direct immersion solid-phase microextraction coupled with gas chromatography–tandem mass spectrometry have been developed for determination of the volatile components in Radix bupleuri injection. A total of 78 compounds were identified from Radix bupleuri injection. Direct immersion solid-phase microextraction gave a better extraction efficiency for polar compounds, including organic acids and alcohols, than headspace solid-phase microextraction or static headspace sampling. Product ion isotope pattern analysis was applied to determine the elemental composition of the precursor ion, which could make the qualitative analysis more accurate and reliable.     

Comparison of Liquid–Liquid Extraction,Simultaneous Distillation Extraction,Ultrasound-Assisted Solvent Extraction,and Headspace Solid-Phase Microextraction for the Determination of Volatile Compounds in Jujube Extract by Gas Chromatography/Mass Spectrometry

Jujube extract has a unique flavor that has been used as a common fragrance due to the volatile compounds. In this study, the volatiles of jujube extract were isolated by liquid–liquid extraction, simultaneous distillation extraction, ultrasound-assisted solvent extraction, and headspace solid-phase microextraction, and analyzed by gas chromatography–mass spectrometry. Altogether 92 compounds were identified by the four methods, of which 53 components were identified for the first time; however, only 21 compounds were identified by all these methods. The performance characteristics of the four pretreatment techniques were compared by principal component analysis which showed that the volatile compounds obtained by liquid–liquid extraction and ultrasound-assisted solvent extraction were similar both in categories and in content; whereas, the volatiles extracted by simultaneous distillation extraction, ultrasound-assisted solvent extraction, and headspace solid-phase microextraction greatly varied. The results indicated that a multi-pretreatment technique should be adopted in order to obtain the most complete information about the volatile compounds in jujube extract. The ultrasound-assisted solvent extraction method exhibited excellent repeatability and recoveries, and was very suitable for quantitative analysis. Although the recoveries and reproducibility of headspace solid-phase microextraction were inferior to the other methods, it was more sensitive than other methods.     

Magnetic nanoparticles used in headspace extraction coupled with DSI-GC-IT/MS for analysis of VOCs in dry Traditional Chinese Medicine

A novel magnetic method using polystyrene modified magnetic nanoparticles to perform thermoheadspace extraction was successfully developed for extraction and preconcentration of volatile organic components in dry Traditional Chinese Medicine(TCM) based on gas chromatography-ion trap/mass spectrometry with a Chromato Probe direct sample introduction device. The dried fruit of Amomum testaceum Ridl. was used as the object TCM. The optimum parameters of headspace magnetic solid-phase extraction were investigated, in which desorption solvent ethyl acetate played a key role in this method,and the headspace extraction temperature of 90℃ and the headspace extraction time of 15 min finally decided. Headspace solid-phase microextraction method was also used to analyze volatile compounds in the TCM to compare with the proposed method. The results show that 60 components were identified totally by two methods; most of the low boiling point chemical compounds are isolated by this new method. In this work, an environmental-friendly and cheap analytical method was established, and a new approach to analyze volatile compounds in dry Traditional Chinese Medicine was also provided.     

Static Headspace Sampling and Solid-Phase Microextraction for Assessment of Edible Oils Stability

Static headspace sampling and headspace solid-phase microextraction have been applied for the determination of the low molecular mass aldehydes—markers of edible oil oxidation. Preconcentration and determination conditions for the two procedures were optimized. LODs LOQs and repeatability of a standard mixture were established for all investigated compounds. Both methods of sampling were applied to the analysis of samples of rapeseed and sunflower oils. It appears that solid-phase microextraction is better than headspace sampling for the analysis of volatile oxidation products. Solid-phase microextraction can be conducted at a much lower temperature and has lower LOD values and better repeatability than headspace sampling.     

Comparison of headspace and direct single-drop microextraction and headspace solid-phase microextraction for the measurement of volatile sulfur compounds in beer and beverage by gas chromatography with flame photometric detection

Three approaches based on headspace single-drop microextraction (HS-SDME), direct single-drop microextraction (Direct-SDME), and headspace solid-phase microextraction (HS-SPME), have been compared for analyzing volatile sulphur compounds (VSCs) in beer and beverage. Procedures and performance of the three methods have been contrasted through the determination of extraction efficiencies, precision, linearity and limits of detection. The overall process of HS-SDME and HS-SPME was applied to GC-FPD determination of five VSCs in beer and beverage.     

Using solid-phase microextraction combined with gas chromatography-mass spectrometry for the study of the volatile products of biosynthesis released by plants and microorganisms

Published data on the methods and results of study of profiles of volatile biologically active compounds are summarized and discussed. The leading role of gas chromatography-mass spectrometry combined with headspace solid-phase microextraction as an optimum analytical method for determining the qualitative and quantitative composition of volatile organic compounds in in vivo experiments is substantiated. The results of investigation of volatile organic compounds produced by micromycetes of the genus Fusarium are reviewed.     

Headspace single-drop microextraction for the analysis of chlorobenzenes in water samples

Exposing a microlitre organic solvent drop to the headspace of an aqueous sample contaminated with ten chlorobenzene compounds proved to be an excellent preconcentration method for headspace analysis by gas chromatography-mass spectrometry (GC-MS). The proposed headspace single-drop microextraction (SDME) method was initially optimised and the optimum experimental conditions found were: 2.5 microl toluene microdrop exposed for 5 min to the headspace of a 10 ml aqueous sample containing 30% (w/v) NaCl placed in 15 ml vial and stirred at 1000 rpm. The calculated calibration curves gave a high level of linearity for all target analytes with correlation coefficients ranging between 0.9901 and 0.9971, except for hexachlorobenzene where the correlation coefficient was found to be 0.9886. The repeatability of the proposed method, expressed as relative standard deviation varied between 2.1 and 13.2% (n = 5). The limits of detection ranged between 0.003 and 0.031 microg/l using GC-MS with selective ion monitoring. Analysis of spiked tap and well water samples revealed that matrix had little effect on extraction. A comparative study was performed between the proposed method, headspace solid-phase microextraction (SPME), solid-phase extraction (SPE) and EPA method 8121. Overall, headspace SDME proved to be a rapid, simple and sensitive technique for the analysis of chlorobenzenes in water samples, representing an excellent alternative to traditional and other, recently introduced, methods.     

Inhibiting sorbent stripping by designing a sorbent‐packed porous probe for headspace solid‐phase microextraction

To prevent the stripping of coating sorbents in headspace solid‐phase microextraction, a porous extraction probe with packed sorbent was introduced by using a porous stainless steel needle tube and homemade sol–gel sorbents. The traditional stainless‐steel needle tube was punched by a laser to obtain two rows of holes, which supply a passageway for analyte vapor during extraction and desorption. The sorbent was prepared by a traditional sol–gel method with both poly(ethylene glycol) and hydroxy‐terminated silicone oil as coating ingredients. Eight polycyclic aromatic hydrocarbons and six benzene series compounds were used as illustrative semi‐volatile and volatile organic compounds in sequence to verify the extraction performance of this porous headspace solid‐phase microextraction probe. It was found that the analysis method combining a headspace solid‐phase microextraction probe and gas chromatography with mass spectrometry yielded determination coefficients of no less than 0.985 and relative standard deviations of 4.3–12.4%. The porous headspace solid‐phase microextraction probe showed no decrease of extraction ability after 200 uses. These results demonstrate that the packed extraction probe with porous structure can be used for headspace solid‐phase microextraction. This novel design may overcome both the stripping and breakage problems of the conventional coating fiber.     

Rapid determination of the volatile components in tobacco by ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction with gas chromatography‐mass spectrometry

An ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction was first employed to determine the volatile components in tobacco samples. The method combined the advantages of ultrasound, microwave, and headspace solid‐phase microextraction. The extraction, separation, and enrichment were performed in a single step, which could greatly simplify the operation and reduce the whole pretreatment time. In the developed method, several experimental parameters, such as fiber type, ultrasound power, and irradiation time, were optimized to improve sampling efficiency. Under the optimal conditions, there were 37, 36, 34, and 36 components identified in tobacco from Guizhou, Hunan, Yunnan, and Zimbabwe, respectively, including esters, heterocycles, alkanes, ketones, terpenoids, acids, phenols, and alcohols. The compound types were roughly the same while the contents were varied from different origins due to the disparity of their growing conditions, such as soil, water, and climate. In addition, the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method was compared with the microwave‐assisted extraction coupled to headspace solid‐phase microextraction and headspace solid‐phase microextraction methods. More types of volatile components were obtained by using the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction method, moreover, the contents were high. The results indicated that the ultrasound‐microwave synergistic extraction coupled to headspace solid‐phase microextraction technique was a simple, time‐saving and highly efficient approach, which was especially suitable for analysis of the volatile components in tobacco.