TiO2对Ni/Al2O3催化剂CO甲烷化性能的影响

采用溶胶凝胶法制备了一系列不同TiO₂含量的TiO₂-Al₂O₃复合载体,并通过浸渍法制备了NiO/TiO₂-Al₂O₃催化剂。分别考察了不同TiO₂含量的NiO/TiO₂-Al₂O₃催化剂及反应温度对CO甲烷化催化性能的影响。实验结果表明,当复合载体中TiO₂质量分数为30%,反应温度为350～450 ℃时,催化剂催化活性较高。利用N₂吸附-脱附(BET)、X射线衍射(XRD)及H₂程序升温还原(H₂-TPR)等手段对催化剂物化性能进行了表征。结果表明,加入适量的TiO₂能抑制镍铝尖晶石NiAl₂O₄物种的生成,改善NiO的表面分散性能,避免大晶粒NiO的形成,也改善了催化剂的还原性能,从而提高催化剂的CO甲烷化活性。     

TiO2上原子分散的Fe位点促进光催化CO2还原:增强的催化活性、DFT计算和机制洞察(英文)

光催化CO₂高效、环保地转化为高附加值化工产品(CH₄, CO, CH₃OH等),能够有效降低环境污染并且促进资源利用.商用P25(TiO₂)因其具有无毒、化学稳定性和强氧化还原电位而被广泛研究.然而, TiO₂的带隙高达3.0 e V,只有在紫外光激发下才能产生光生载流子,这极大地限制了其在光催化领域的应用.单原子催化剂(SACs)具有金属原子利用率高、选择性高和活性高等优点,可用于精细化工合成、氧还原和污染物降解等催化领域.由于单个原子具有极高的表面自由能,因此如何稳定地保持原子分散,避免原子团聚成为SACs制备和反应过程中的一大挑战.本文通过简单的负压封装后热解方法实现了Fe在TiO₂表面的原子级分散负载,所制备的Fe SA/TiO₂催化剂展现出高效的光催化CO₂还原性能,并且利用多种表征手段及理论计算研究了TiO₂表面Fe位点促进CO₂高效转化的反应机制.扫描透...     

WO3对MnOx/TiO2低温脱硝SCR催化剂的改性研究

以醋酸锰为前驱物通过浸渍法制备了MnO_x/TiO₂催化剂,用WO₃对载体进行改性制得一系列MnO_x-WO₃/ TiO₂催化剂,采用X射线衍射（XRD）、比表面积测定(BET)、拉曼光谱(LRS)、原位红外(FT-IR)光谱等表征技术进行相关的微观表征分析,同时在模拟氨气选择性催化还原NO_x（NH₃-SCR）的反应条件下对催化剂的脱硝反应活性进行了考察。研究表明,添加5%的WO₃拓展了载体的比表面积,提高了催化剂的抗热性,增加了催化剂表面的Brnsted酸位,拓宽其选择性催化还原脱硝活性温度窗口,对MnO_x/TiO₂催化剂有很好的改性作用;先钨后锰的负载顺序优于先锰后钨;随着温度的升高,化学催化反应速率提高,催化剂表面NH₃吸附峰呈减弱或消失趋势,故催化剂脱硝活性温度曲线呈中间高、两头低。     

载体形貌对Ni3Fe/CeO2催化剂甲烷干重整反应性能的影响

通过改变水热法条件合成了不同形貌CeO₂载体(棒状CeO₂-R、立方体CeO₂-C和多面体CeO₂-P),并用浸渍法制备了Ni₃Fe/CeO₂催化剂,继而研究了不同载体形貌Ni₃Fe/CeO₂催化剂对其甲烷干重整反应性能的影响。采用X射线衍射、N₂吸附-脱附、透射电镜、拉曼光谱、X射线光电子能谱、热重等对反应前后催化剂结构进行表征。结果表明,Ni₃Fe/CeO₂-R具有较大比表面积和较高的氧空位浓度,在甲烷干重整反应中表现出了优异的催化反应活性。800℃时,CH₄和CO₂的转化率分别为82%和91%,且反应10 h性能稳定并且其积炭石墨化程度较低。同时,通过CeO₂-R载体氧空位对CO₂活化,有效抑制了对亲氧性Fe物种的过度氧化行为,反应前后催化剂Ni_...     

贵金属负载TiO2对光催化还原CO2选择性的影响

利用光沉积方法在TiO₂表面分别负载1%(质量分数) Pt、Pd、Au和Ag助催化剂.用TEM、XRD、UV-vis等技术对催化剂进行了表征,并利用连续瞬态电流时间响应和线性扫描伏安法等电化学方法,对贵金属负载的TiO₂光催化剂在光照条件下的电流响应强度及电催化析氢电位等特性加以测试.分析了贵金属助催化剂对光催化还原CO₂性能的差异.结果表明,负载贵金属助催化剂能显著加速光生电子空穴的分离,降低复合率;另外,助催化剂对还原CO₂选择性的顺序为Ag>Au>Pd>Pt.贵金属助催化剂还原CO₂的加氢选择性和析氢过电位存在相关性,即越不利于析氢过程的助催化剂,其催化CO₂加氢还原产物的选择性越高.     

CO2甲烷化反应路径的研究进展

CO₂甲烷化反应是一个复杂的多相催化过程,在反应过程中会产生各种各样的中间体,其反应路径目前还存在许多争议和矛盾。深入系统地研究CO₂甲烷化反应中催化剂表面中间体的演变过程,可以进一步从机理的角度优化催化剂的设计方案,提高催化性能。本工作主要基于原位红外光谱表征技术,总结梳理了最近关于CO₂甲烷化反应路径研究的相关工作,着重探讨了负载型催化剂的活性金属、载体、助剂、合成方法等因素对CO₂甲烷化反应路径的影响以及由此对催化剂性能所产生的积极效果。同时针对现阶段所面临的争论点,即反应气CO₂与H2的活化位点、催化剂的活性位点以及未来可行的研究方法进行了详细论述。     

铁基催化剂在COx加氢制高附加值烃反应中的应用

化石燃料的广泛使用导致大气中CO₂的排放量急剧增加,进而引起全球变暖和海洋酸化等一系列问题.CO加氢(费托合成)反应是利用非石油来源的原料生产液体燃料和化学品的一种重要途径.同时,利用可再生的H₂将CO₂转化为高附加值的产品有利于减少对化石燃料的依赖,减轻由于大气中CO₂浓度过高带来的负面影响.开发新型、高效、稳定的催化剂是费托合成和CO₂加氢制高附加值烃的关键因素之一.Fe基、Co基和Ru基催化剂是费托合成中常用的催化剂.而在CO₂加氢反应中,Co基和Ru基催化剂上主要发生甲烷化反应,几乎没有长链烃生成.Fe基催化剂在费托合成和CO₂加氢反应中均表现出优异的催化生成长链烃性能.同时,Fe储量丰富和价格便宜的特点也促进Fe基催化剂在两个反应中的广泛应用.一般认为,在Fe基催化剂上CO₂通过逆水煤气变换反应生成CO,CO通过费托合成反应继续加氢生成烃类.因此,CO₂加氢反应和费托合成反应有相似之处,同时也有较大的区别.本文从活性相、助剂和载体的角度综述了各组分在Fe基催化剂催化CO/CO₂加氢反应中的作用,总结了其中的区别与联系.催化剂在反应中会发生复杂的相变过程,形成多种铁物种;其中,碳化铁(χ-Fe₅C₂,ε-Fe₂C,Fe₇C₃和θ-Fe₃C)在费托合成反应中是C-C偶联的活性相,但对于θ-Fe₃C现还存在一些争议.在CO₂加氢反应中Fe₃O₄催化逆水煤气变换反应,碳化铁催化CO加氢反应.金属助剂对CO/CO₂加氢反应的促进作用较为相似,在两个反应中碱金属的促进作用最为明显.费托合成反应对载体有较强的适应性,而CO₂加氢反应对载体敏感性较强,Al₂O₃,ZrO₂和碳材料载体效果较好.本文还总结了近些年来基于对活性相、助剂和载体的深入理解设计制备的一些新型催化剂及其在费托合成和CO₂加氢反应中的应用,包括具有新颖结构的催化剂、金属-有机骨架衍生催化剂以及与沸石分子筛结合的双功能催化剂.最后,还分析了目前Fe基催化剂在费托合成和CO₂加氢反应应用中所面临的问题和挑战,并对未来的发展趋势进行了展望.     

铁基催化剂在COx加氢制高附加值烃反应中的应用

化石燃料的广泛使用导致大气中CO₂的排放量急剧增加,进而引起全球变暖和海洋酸化等一系列问题.CO加氢(费托合成)反应是利用非石油来源的原料生产液体燃料和化学品的一种重要途径.同时,利用可再生的H₂将CO₂转化为高附加值的产品有利于减少对化石燃料的依赖,减轻由于大气中CO₂浓度过高带来的负面影响.开发新型、高效、稳定的催化剂是费托合成和CO₂加氢制高附加值烃的关键因素之一.Fe基、Co基和Ru基催化剂是费托合成中常用的催化剂.而在CO₂加氢反应中,Co基和Ru基催化剂上主要发生甲烷化反应,几乎没有长链烃生成.Fe基催化剂在费托合成和CO₂加氢反应中均表现出优异的催化生成长链烃性能.同时,Fe储量丰富和价格便宜的特点也促进Fe基催化剂在两个反应中的广泛应用.一般认为,在Fe基催化剂上CO₂通过逆水煤气变换反应生成CO,CO通过费托合成反应继续加氢生成烃类.因此,CO₂加氢反应和费托合成反应有相似之处,同时也有较大的区别.本文从活性相、助剂和载体的角度综述了各组分在Fe基催化剂催化CO/CO₂加氢反应中的作用,总结了其中的区别与联系.催化剂在反应中会发生复杂的相变过程,形成多种铁物种;其中,碳化铁(χ-Fe₅C₂,ε-Fe₂C,Fe₇C₃和θ-Fe₃C)在费托合成反应中是C-C偶联的活性相,但对于θ-Fe₃C现还存在一些争议.在CO₂加氢反应中Fe₃O₄催化逆水煤气变换反应,碳化铁催化CO加氢反应.金属助剂对CO/CO₂加氢反应的促进作用较为相似,在两个反应中碱金属的促进作用最为明显.费托合成反应对载体有较强的适应性,而CO₂加氢反应对载体敏感性较强,Al₂O₃,ZrO₂和碳材料载体效果较好.本文还总结了近些年来基于对活性相、助剂和载体的深入理解设计制备的一些新型催化剂及其在费托合成和CO₂加氢反应中的应用,包括具有新颖结构的催化剂、金属-有机骨架衍生催化剂以及与沸石分子筛结合的双功能催化剂.最后,还分析了目前Fe基催化剂在费托合成和CO₂加氢反应应用中所面临的问题和挑战,并对未来的发展趋势进行了展望.     

γ-Al2O3对SCR脱硝催化剂V2O5-WO3/TiO2的改性研究

采用溶胶凝胶法制备了不同γ-Al₂O₃含量的钛铝复合载体,以此为载体采用浸渍法负载V₂O₅和WO₃制备了一系列催化剂。采用X射线衍射(XRD)、比表面积测定(BET)、程序升温还原(H₂-TPR)、高分辨率透射电子显微镜(HRTEM)等表征技术对催化剂表面形态进行分析,同时在模拟氨气选择性催化还原NO(NH₃-SCR)的反应条件下,对催化剂的脱硝反应活性和SO₂抗中毒进行考察。结果发现,TiO₂和γ-Al₂O₃之间的协同作用使得V₂O₅-WO₃/TiO₂-γ-Al₂O₃催化剂的脱硝效率及活性窗口明显优于单一载体制备的催化剂,表现出了良好的热稳定性和抗SO₂毒化能力,特别是V₂O₅-WO₃/TiO₂-15% γ-Al₂O₃在310~460 ℃,NO的转化率均在80%以上,反应窗口最宽。各种表征结果表明,TiO₂-γ-Al₂O₃复合载体中γ-Al₂O₃高度分散在TiO₂上,复合载体具有较大的比表面积,同时具有较强的还原能力。     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

Morphology‐Engineered Highly Active and Stable Ru/TiO2 Catalysts for Selective CO Methanation

Ru/TiO₂ catalysts exhibit an exceptionally high activity in the selective methanation of CO in CO₂‐ and H₂‐rich reformates, but suffer from continuous deactivation during reaction. This limitation can be overcome through the fabrication of highly active and non‐deactivating Ru/TiO₂ catalysts by engineering the morphology of the TiO₂ support. Using anatase TiO₂ nanocrystals with mainly {001}, {100}, or {101} facets exposed, we show that after an initial activation period Ru/TiO₂‐{100} and Ru/TiO₂‐{101} are very stable, while Ru/TiO₂‐{001} deactivates continuously. Employing different operando/in situ spectroscopies and ex situ characterizations, we show that differences in the catalytic stability are related to differences in the metal–support interactions (MSIs). The stronger MSIs on the defect‐rich TiO₂‐{100} and TiO₂‐{101} supports stabilize flat Ru nanoparticles, while on TiO₂‐{001} hemispherical particles develop. The former MSIs also lead to electronic modifications of Ru surface atoms, reflected by the stronger bonding of adsorbed CO on those catalysts than on Ru/TiO₂‐{001}.     

CO Preferential oxidation promoted by UV irradiation in the presence of H2 over Au/TiO2

The catalytic oxidation of CO was performed over Au/TiO(2) under UV irradiation in the presence of H(2) in different reaction systems. It was found that the introduction of H(2) enhanced the CO thermocatalytic oxidation in a CO pre-introduced system (CO/O(2)vs. CO/H(2)/O(2)), but suppressed that in an O(2) pre-introduced (O(2)/CO vs. O(2)/H(2)/CO) system. Although the CO oxidation in both CO/H(2)/O(2) and O(2)/H(2)/CO systems could be remarkably enhanced under UV irradiation, the oxidation of H(2) was suppressed under UV irradiation. It was proposed that the dissociative chemisorption H ([triple bond]Ti-H) at surface oxygen vacancy sites of TiO(2) could act as both the electron-acceptors for the photogeneration electrons and the electron-donors for the chemisorbed O(2) at TiO(2), and thus enhance the CO oxidation during the coinstantaneous process of thermocatalysis and photocatalysis. The suppression of H(2) thermocatalytic oxidation under UV irradiation might be ascribed to the electron transfer effect, i.e., the dissociative chemisorption H on Au (Au-H) could be desorbed at the H(2) molecule via accepting the photogenerated electrons from TiO(2).     

Intrinsic catalytic structure of gold nanoparticles supported on TiO2

Despite the fragility of TiO(2) under electron irradiation, the intrinsic structure of Au/TiO(2) catalysts can be observed by environmental transmission electron microscopy. Under reaction conditions (CO/air 100?Pa), the major {111} and {100} facets of the gold nanoparticles are exposed and the particles display a polygonal interface with the TiO(2) support bounded by sharp edges parallel to the 〈110〉 directions.     

Supported Ru catalysts prepared by two sonication-assisted methods for preferential oxidation of CO in H2

The preferential oxidation (PROX) of CO in the presence of H(2) is an important step in the production of pure H(2) for industrial applications. In this report, two sonochemical methods (S1 and S2) were used to prepare highly dispersed Ru catalysts supported on mesoporous TiO(2) (TiO(2)(MSP)) for the PROX reaction, in which a reaction gas mixture containing 1% CO + 1% O(2) + 18% CO(2) + 78% H(2) was used. The supported Ru catalysts performed better than the supported Au and Pt catalysts, and the S1 and S2 methods are superior to the impregnation method. The Ru/TiO(2)(MSP) catalysts were active for the PROX reaction below 200 °C and good for the methanation reactions of CO and CO(2) above 200 °C. The presence of residual chlorine in the catalysts severely suppressed their PROX reaction activity, and a higher dispersion of Ru particles led to better catalytic performances. The addition of Au in the Ru/TiO(2)(MSP) catalyst also caused a poorer catalytic activity for both the PROX and the methanation reactions. TPR results showed that in the active catalysts prepared by the S1 and S2 methods, the well dispersed Ru particles, after calcination in air, had a stronger interaction with the support than those in the catalyst prepared by the impregnation method and in the Au-Ru/TiO(2)(MSP) catalyst. In situ CO absorption experiments performed with the diffusion reflectance Fourier transform infra red (DRIFT) method showed that the bridged adsorbed CO species on isolated Ru(0) sites correlated with the catalytic performances, indicating that these isolated Ru(0) sites are the most active sites of the Ru/TiO(2)(MSP) catalysts in the PROX reaction.     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO2纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO2纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

纳米碳纤维固载TiO_2

采用聚乙烯吡咯烷酮(PVP)溶胶通过静电纺丝法制备了PVP纳米纤维。将PVP纳米纤维直接固载在碳棒上,在250℃预氧化,850℃炭化,得到碳纳米纤维。将碳纤维渍取钛酸丁酯,200℃下热处理后在550℃空气中焙烧,制得负载型纳米TiO2。利用扫描电子显微镜、红外吸收光谱、X射线衍射等测试技术对纳米纤维进行了表征。并把负载型TiO2分散在亚甲基蓝溶液中,分析了TiO2固载纳米碳纤维的光催化活性。结果表明,在100mL20mg/L亚甲基蓝溶液中加入1.0mgTiO2固载碳纳米纤维,光催化降解40min后,亚甲基蓝的分解率接近75%。     

TiO2晶面依赖的Ir-TiOx相互作用对Ir/TiO2催化剂巴豆醛选择性加氢性能的影响

α,β-不饱和醇是一类重要的精细化学品,主要通过α,β-不饱和醛选择性加氢获得.由于α,β-不饱和醛分子中含有共轭的C=C键和C=O键,且后者键能更大,在热力学和动力学上均不利于C=O键的选择性加氢生成α,β-不饱和醇.因此,提高α,β-不饱和醛中C=O的加氢选择性是催化领域中一项挑战性的课题.巴豆醛属于典型的α,β-不饱和醛,研究其选择性加氢生成巴豆醇具有广泛的代表意义;Ir负载在具有还原性载体(如TiO2)上时,表现出很好的C=O加氢选择性,因此,成为近年来的研究热点.由于暴露不同晶面的TiO2具有不同的形貌和电子结构,因此研究Ir-TiO2相互作用的晶面依赖性及其对巴豆醛选择性加氢反应的影响具有重要意义.本文以分别暴露{101}、{100}和{001}晶面的锐钛矿TiO2纳米晶为载体,制备了负载型Ir/TiO2催化剂,系统研究了催化剂经过不同的预处理过程(在不同温度下H2还原和O2再氧化)后对巴豆醛的气相选择性加氢的性能.利用高分辨透射电镜、原位X射线光电子能谱和原位漫反射红外光谱及氨程序升温脱附等技术研究发现,预处理条件显著改变了Ir-TiOx的相互作用,包括Ir金属的几何、电子性质及催化剂表面酸性.这种相互作用与TiO2的暴露晶面密切相关,从而改变了不同Ir/TiO2催化剂上不同加氢反应行为.研究结果表明,经300℃预还原的Ir/TiO2-{101}催化剂催化性能最好,在80℃下初始反应速率为166.1 μmol g-Ir-1 s-1,巴豆醇的生成转化频率为0.022 s-1.与其他催化剂相比,Ir/TiO2-{101}催化剂表面Ir0浓度最高,表面酸度适中,因此表现出最佳的催化性能.同时Ir-TiOx界面在反应中的协同作用,对H2和巴豆醛分子中C=O键的吸附和活化起到了关键作用.然而当催化剂经过400℃的H2预还原后,由于产生了强的金属-载体相互作用使得TiOx对Ir粒子进行了包裹从而导致Ir-TiOx界面缺失,因而催化剂催化巴豆醛加氢性能降低.本文为理解金属-载体相互作用对巴豆醛选择性加氢反应的影响提供了新的见解,并为设计高性能α,β-不饱和醛选择性加氢催化剂提供了理论依据.     

Reconstruction of the (001) surface of TiO2 nanosheets induced by the fluorine-surfactant removal process under UV-irradiation for dye-sensitized solar cells

The champion dye-sensitized solar cells (DSSCs) based on TiO(2) nanoparticles nearly reach the limit of photo-current density using the black dye or zinc porphyrin dye as sensitizer. However, the way to make ordinary DSSCs more efficient as well as to understand the mechanism is still essential. Here we present an elegant UV irradiation treatment of TiO(2) nanosheets to enhance the performance of DSSCs based on the TiO(2) nanosheets via room temperature removal of inorganic surfactants and reconstruction of the (001) surface of TiO(2) nanosheets, killing two birds with one stone. UV irradiation was utilized to remove the fluorine-surfactant on the surface of anatase TiO(2) nanosheets with a high percentage of exposed {001} facets which were synthesized with the aid of hydrofluoric acid. The nanosheets treated with UV irradiation for 40 min had the advantage of improving the photoelectric conversion efficiency of DSSCs by 17.6%, compared to that without UV treatment when they were introduced into DSSCs as photoanode materials. The improved efficiency was ascribed to more dye adsorption. A theoretical calculation proposed that UV irradiation induced microfaceted steps on the TiO(2) surface by two domain (1 × 4) reconstruction after UV irradiating the (1 × 1) (001) surface. The microfaceted steps increase the active surface area of the TiO(2) nanosheets by increasing the exposure of titanium atoms and engendering active sites.     

Nitrogen self-doped nanosized TiO2 sheets with exposed {001} facets for enhanced visible-light photocatalytic activity

Nitrogen self-doped TiO(2) nanosheets with exposed {001} facets (ca. 67%) were synthesized by solvothermal treatment of TiN in a HNO(3)-HF ethanol solution and exhibited much higher visible-light photocatalytic H(2)-production activity than nitrogen doped TiO(2) microcrystallites with exposed {001} facets (ca. 60%) by a factor of 4.1.     

Hierarchical TiO2 microspheres: synergetic effect of {001} and {101} facets for enhanced photocatalytic activity

Well-faceted nanocrystals of anatase TiO(2) with specific reactive facets have attracted extraordinary research interest due to their many intrinsic shape-dependent properties. In this work, hierarchical TiO(2) microspheres consisting of anatase nanosheets or decahedrons were synthesized by means of a facile hydrothermal technique; meanwhile, the percentage of {001} facets can be tuned from 82 to 45%. Importantly, by investigating the photo-oxidation reactions for ˙OH radical generation and photoreduction reactions for hydrogen evolution, the TiO(2) microspheres consisting of nano-decahedrons with 45% {001} facets show superior photoreactivity (more than 4.8-times) compared to the nanosheets with 82% {001} facets. By analyzing the results of scanning electron microscopy (SEM), photoluminescence (PL) and first-principles density functional theory (DFT) calculations, a model of charge separation between the well-formed {001} and {101} facets is proposed, and the enhanced photocatalytic efficiency is largely attributed to the efficient separation of photogenerated charges among the crystal facets co-exposed.