含二乙炔类共轭聚合物的合成及性能研究

在以CuCl和四甲基乙二胺(TMEDA)作为催化剂和邻二氯苯作溶剂条件下,以二-(4-乙炔苯基)-4-辛氧基苯胺(M1)和3, 6-双(乙炔基)-N-辛基咔唑(M2)作为单体,通过Glaser-Hay氧化偶联反应合成了含有咔唑和三苯胺结构单元的聚芳烃二乙炔共轭聚合物.采用红外光谱、核磁共振谱、热失重分析、紫外吸收光谱和荧光光谱等方法对聚合物进行结构表征与性能测试.所得到的聚合物都溶于普通的有机溶剂(如四氢呋喃、二氯甲烷、氯仿、甲苯等).结果表明,聚合物具有优异的热稳定性,热失重5 %时,分解温度在400℃以上;在光激发的条件下,聚合物在二氯甲烷溶液中发射蓝光.     

Aromatic polymers with side oxadiazole rings as luminescent materials in LEDs

Aromatic polyamides and polyazomethines with side oxadiazole rings have been synthesized by using aromatic diamines containing pendent substituted oxadiazole groups and a diacid chloride having diphenylsilane or hexafluoroisopropylidene, or an aromatic dialdehyde with fluorene unit, respectively. These polymers were easily soluble in amidic solvents. Very thin films which were deposited from polymer solutions onto silicon wafers exhibited smooth, pinhole-free surface in atomic force microscopy investigations. The polymers showed high thermal stability with decomposition temperature being above 400°C. Some of them exhibited blue photoluminescence, in the range of 450-480 nm, making them promising candidates for future use as high performance materials in the construction of light emitting devices.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

基于1-(4-己氧)苯和2,4,6-三苯基-1,3,5-三嗪功能化芴单元的聚合物蓝光材料的合成与表征

以聚(9,9-二己烷芴)(1)和聚(9,9-二(1-(4-己氧)苯)芴)(2)作为参照物,通过Suzuki偶联反应合成了侧链9位碳含有4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪单元的芴共聚物3.聚合物1,2和3固体粉末的5%质量热损失温度分别是274,318和401℃,玻璃化转变温度分别是91,120和139℃.聚合物1,2和3在甲苯溶液中的最大吸收峰和荧光发射峰分别在380和435 nm.从聚合物1到聚合物3,薄膜的荧光发射最大半峰宽逐渐降低.大体积刚性吸电子2,4,6-三苯基-1,3,5-三嗪基团的引入,使聚合物1,2和3的热稳定性、蓝光发射的色纯度和光谱稳定性逐渐提高,不同工作电压驱动下聚合物3稳定的电致发光光谱进一步证明了这一点.聚合物1,2和3的最高占有轨道能级分别为-5.72,-5.95和-5.96eV,最低未占有轨道能级分别为-2.70,-2.39和-2.43 eV.聚合物1,2和3的三线态能级分别为2.82,2.81和2.97 eV.聚合物1,2和3的单线态-三线态能级差分别是0.32,0.32和0.15 eV.4-己氧基苯的引入使聚合物的能隙变宽,而吸电子的2,4,6-三苯基-1,3,5-三嗪的引入使聚合物单线态-三线态能级差依次减少.聚合物1,2和3粉末均易于形成非晶薄膜.聚合物3粉末的有序性介于聚合物1和2之间,聚合物2侧链的烷氧基苯有助于提高固体粉末有序形态的多样化.综合结果表明,侧链含有刚性4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪基团的无规共聚物3具有更佳的综合光电性质.     

Synthesis and properties of fluorene‐based fluorinated polymers

Fluorene‐based polymers containing various fluorinated benzene (fluorobenzene, p‐difluorobenzene, and tetrafluorobenzene) moieties were synthesized. In addition, perfluorooctylation of poly‐[(9,9‐dioctylfluorene‐2,7‐diyl)‐co‐(fluorene‐2,7‐diyl)] was carried out to afford fluorene‐based polymers with perfluorooctyl moiety at the 9‐position on the fluorene ring. To evaluate the effect of fluorine moiety, polymers containing nonfluorinated benzene moieties and nonfluorinated octyl groups were synthesized. The photoluminescence measurements indicated that all these polymers exhibited blue emission in solution, but a polymer containing a perfluorooctyl group did not emit in the film state. Polymers containing various fluorinated benzene moieties showed higher fluorescence quantum yields and thermal stability than those containing nonfluorinated benzene. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3143–3150, 2001     

含烷基侧链聚芴基苯并二噁唑聚合物的合成及性能研究

通过溶液缩聚的方法合成了一种含烷基侧链聚芴基苯并二噁唑聚合物(PBOPFx),讨论了聚合物的光物理性能、热性能和溶解性能.结果表明,在甲基磺酸(MSA)溶液中,PBOPFx紫外吸收显示出最大吸收峰为466 nm左右的蓝光发射,与PBO相比,最大紫外吸收峰和最大荧光发射峰均发生了明显红移,这是由于芴单元的引入,提高了聚合物的共轭程度,加强了对电子的束缚能力.此外,比较了PBOPFx在320 nm处和430 nm处激发得到的荧光发射光谱,预测聚合物中存在两种共轭单元,通过测定氧化还原曲线以及讨论stokes位移,验证了这个假设,但是由于两种共轭单元并没有出现明显的分离现象,同时还伴有电子传输杂化,致使PBOPFx主要显示出共轭长度大的单元的吸收和发射.另外由于芴单元中烷基侧链的存在,聚合物(PBOPFx)的热稳定性远低于聚亚苯基苯并二噁唑聚合物(PBO),起始分解温度在350℃左右,溶解性方面,PBOPFx有了很大的改善,在大多数有机溶剂中能较好溶解.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

Alternating fluorene copolymers containing isothianaphthene derivatives: A study of their aggregation properties and small band gap

Several fluorene copolymers containing isothianaphthene units ( P1 , P2 , and P3 ) or similar derivatives ( P4 and P5 ) have been synthesized by Pd‐catalyzed Suzuki polymerization. The monomers containing isothianaphthene were prepared by a ring‐closure reaction with Lawesson's reagent. Strong photoluminescence (PL) quenching in the film state was observed for P1 and P2 , which was mainly due to the enhanced quinoid character formed by introducing the isothianaphthene unit. Their energy levels of the compounds were determined using cyclic voltammetry. Among the polymers tested, the polymer containing both an isothianaphthene and a selenophene unit, P2 , showed the smallest band gap of 1.85 eV. The influence of structural variation on the band gap of the polymer chains was further investigated by optimizing the geometries of several model monomers. Our results based on the optical and electrochemical properties combined with theoretical calculations showed that polymers containing isothianaphthene have small band gaps, rigid conformations, and strong tendencies to aggregation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3573–3590, 2008     

Toward low‐band gap dithienophosphole copolymers for an application in organic solar cells

Two functionalized dithieno[3,2‐b:2′,3′‐d]phospholes with solubilizing groups have been synthesized that allow for the generation of a series of π‐conjugated AB‐ and ABC‐copolymers. The polymers obtained show notable optoelectronic properties with red‐shifted absorption and emission in the orange to red section of the optical solar spectrum. Although combination of dithienophosphole units with fluorene building blocks gives access to processable polymers with band gaps between 2.2 and 2.3 eV in solution and 2.0 eV in the solid state, an ABC copolymer based on dithienophosphole, fluorene, and bis(thienyl)benzothiadiazole units was found to not only exhibit a suitable band gap for solar cell applications (solution: 2.0 eV; solid state: 1.7 eV) but also showed good solubility as well as good electron transfer properties in the presence of fullerene (C₆₀). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8179–8190, 2008     

Synthesis and characterization of fluorescent poly[fluorene‐co‐phenylene‐1‐(di‐2‐pyridylamine)] copolymer and its Ru(II) complex

2,2′‐dipyridylamine substituted poly(fluorene‐co‐phenylene) copolymers with different concentrations of dipyridylamine have been synthesized by Suzuki polycondensation. These polymers were found to be soluble in organic solvents such as tetrahydrofuran, chloroform, and dimethylformamide. The photoluminescence of the copolymer was slightly blueshifted as the concentration of dipridylamine was increased. The introduction of dipyridylamine and the ruthenium complex into the polymer significantly improved the photoluminescence efficiency. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4838–4846, 2004     

Cobalt(III)-catalyzed cycloaddition polymerization of diynes with nitriles: Synthesis of polymers containing pyridine moieties in the main chain

The synthesis of pyridine-containing polymers was carried out by the cycloaddition of diynes with nitriles in the presence of organocobalt complexes as catalysts. As a model experiment, the pyridine-formation reaction of monofunctional acetylenes with nitriles was reexamined in detail in the presence of organocobalt catalysts, from which the combination of terminal aliphatic acetylenes and aromatic nitriles was proved to be suitable for the specific pyridine-formation process. On the basis of this result, the polymerization of terminal aliphatic diynes with aromatic nitriles was carried out in the presence of the cobalt catalyst (10 mol %) to give polymers containing substituted pyridine moieties in the main chain in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1979–1986, 1999     

芴2,7位取代的9,9’-二芳基螺芴类化合物的合成及性能

设计并合成了一系列以三苯胺为核,芴衍生物为外围基团的有机蓝光小分子,该合成通过Suzuki反应在9-芳基芴的2位和(或)7位引入相同或不同取代基作为模块,并利用Friedel-Crafts反应将4-甲基三苯胺与这一系列模块结合.用NMR,MS和元素分析进行结构表征.荧光测试结果表明该类化合物溶液的荧光发射波长范围在442～466 nm之间,属蓝光发射.电化学测试显示该类材料的HOMO能级位于-5.15～-5.19 eV之间.差示扫描量热仪与热重分析得出化合物的玻璃化转变温度在166℃以上,热分解温度高于398℃,表明该类材料具有良好的热稳定性.     

Cyclopentadiene annulated polycyclic aromatic hydrocarbons: investigations of electron affinities

The adiabatic electron affinities of cyclopentadiene and 10 associated benzannelated derivatives have been predicted with both density functional and Hartree-Fock theory. These systems can also be regarded as benzenoid polycyclic aromatic hydrocarbons (PAHs) augmented with five-membered rings. Like the PAHs, the electron affinities of the present systems generally increase with the number of rings. To unequivocally bind an electron, cyclopentadiene must have at least two conventionally fused benzene rings. 1H-Benz[f]indene, a naphthalene-annulated cyclopentadiene, is predicted to have a zero-point energy corrected adiabatic electron affinity of 0.13 eV. Since the experimental E(A) of naphthalene is negative (-0.19 eV), the five-membered ring appendage contributes to the stability of the naphthalene-derived 1H-benz[f]indene radical anion significantly. The key to binding the electron is a contiguous sequence of fused benzenes, since fluorene, the isomer of 1H-benz[f]indene, with separated six-membered rings, has an electron affinity of -0.07 eV. Each additional benzene ring in the sequence fused to cyclopentadiene increases the electron affinity by 0.15-0.65 eV: the most reliable predictions are cyclopentadiene (-0.63 eV), indene (-0.49 eV), fluorene (-0.07 eV), 1H-benz[f]indene (0.13 eV), 1,2-benzofluorene (0.25 eV), 2,3-benzofluorene (0.26 eV), 12H-dibenzo[b,h]fluorene (0.65 eV), 13H-indeno[1,2-b]anthracene (0.82 eV), and 1H-cyclopenta[b]naphthacene (1.10 eV). In contrast, if the six-membered ring-fusion is across the C(2)-C(3) cyclopentadiene single bond, only a single benzene is needed to bind an electron. The theoretical electron affinity of the resulting molecule, isoindene, is 0.49 eV, and this increases to 1.22 eV for 2H-benz[f]indene. The degree of aromaticity is responsible for this behavior. While the radical anions are stabilized by conjugation, which increases with the size of the system, the regular indenes, like PAHs in general, suffer from the loss of aromatic stabilization in forming their radical anions. While indene is 21 kcal mol(-1) more stable than isoindene, the corresponding radical anion isomers have almost the same energy. Nucleus-independent chemical shift calculations show that the highly aromatic molecules lose almost all aromaticity when an extra electron is present. The radical anions of cyclopentadiene and all of its annulated derivatives have remarkably low C-H bond dissociation energies (only 18-34 kcal mol(-1) for the mono-, bi-, and tricyclics considered). Hydrogen atom loss leads to the restoration of aromaticity in the highly stabilized cyclopentadienyl anion congeners.     

Synthesis of diynes and tetraynes from in situ desilylation/dimerization of acetylenes

[reaction: see text]. An efficient method for the in situ desilylation/oxidative dimerization of (trialkylsilyl)acetylenes is described. This protocol avoids the complications encountered with sensitive diynes by eliminating the deprotection and isolation steps. Various aromatic and alkyl diynes and tetraynes can be synthesized in a straightforward manner in good yields (82-99%) from TIPS-protected acetylenes. This method facilitates the efficient synthesis of novel tetrayne-bridged acetylenic cyclophanes 6 and 7 in a direct manner.     

Sulfonated poly(fluorenyl ether ketone) membrane prepared via direct polymerization for PEM fuel cell application

Sulfonated poly(fluorenyl ether ketone)s with inherent viscosity ranging from 0.68 to 0.93 dL/g were directly synthesized by aromatic nucleophilic polycondensation of bisphenol fluorene with various ratios of sulfonated difluorobenzophenone to difluorobenzophenone. The synthesized polymers were characterized by ¹H NMR method and elemental analysis. The polymers were tested to be soluble in dipolar aprotic solvents such as DMAc, DMF and DMSO and can be readily cast into tough films. These films showed highly thermal degradation temperature, glass transition temperature and excellent water affinity as well as excellent proton conductivity. The polymers showed a promising proton membrane material for PEM fuel cell application.     

Synthesis and properties of wholly aromatic polymers bearing cardo fluorene moieties

Three series of aromatic polyamides, polyesters, and poly(1,3,4‐oxadiazole)s containing bulky fluorene structures were prepared from 9,9‐bis(4‐carboxyphenyl) fluorene. All of the polymers were readily soluble in many organic solvents and showed useful thermal stability associated with high glass‐transition temperatures in the range of 220–366 °C. These wholly aromatic polymer films were colorless, with high optical transparency, and exhibited UV‐vis absorption bands at 266–348 nm and photoluminescence maximum bands at 368–457 nm within the purple to green region in N,N‐dimethylacetamide (DMAc) solutions. The poly(amine‐amide) Ic exhibited excellent electrochromic contrast and coloration efficiency, changing color from the colorless neutral form to green and then to the dark blue oxidized forms with good stability of electrochromic characteristics. Almost all of these wholly aromatic polymer films were colorless and showed high optical transparency. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4352–4363, 2007     

Design and synthesis of 9,9‐dioctyl‐9H‐fluorene based electrochromic polymers

Two novel heterocycle‐fluorene‐heterocycle monomers, 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)dithiophene (Th‐F‐Th) and 5,5′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxine) (EDOT‐F‐EDOT), were synthesized via Stille coupling reaction and electropolymerized to form corresponding polymers P(Th‐F‐Th) and P(EDOT‐F‐EDOT). Furthermore, the optoelectronic properties of the obtained monomers and polymers were explored using cyclic voltammetry (CV), UV–vis, and emission spectra and in situ spectroelectrochemical techniques. The band gap values of monomers calculated by DFT were 3.75 eV for EDOT‐F‐EDOT and 4.03 eV for Th‐F‐Th, while that of P(EDOT‐F‐EDOT) and P(Th‐F‐Th) were brought down to 1.70 and 2.10 eV, respectively. Both polymers exhibited excellent redox activity and electrochromic performance. P(EDOT‐F‐EDOT) exhibited a maximum optical contrast of 25.8% at 500 nm in visible region with a response time of 1.2 s. In addition, the coloration efficiency of P(EDOT‐F‐EDOT) was calculated to be 220 cm² C^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 325–334     

Preparation and properties of polybenzimidazoles containing cardo groups

Several polybenzimidazoles containing cardo groups were prepared: A cardodicarboxylic acid, 9,9-bis(4-carboxyphenyl)fluorene, and two cardotetramines, 9,9-bis(3,4-diaminophenyl)fluorene and 9,9-bis(3,4-diaminophenyl)10-anthrone. The cardodicarboxylic acid was condensed with aromatic tetramines and the cardotetramines were condensed with aromatic dicarboxylic acids. Prior to polymer synthesis two model compounds, 9,9-bis[4,(2-benzimidazolyl)phenyl]fluorene and 2,2′-diphenyl-5,5′-(9,9-fluorenediyl)-bibenzimidazole were prepared and characterized by spectral methods. The polymers were obtained in 60–70% yield and showed reduced viscosity in the range of 0.7–1.1 dL/g. They were soluble in dimethyl formamide (DMF) and chlorinated solvents like tetrachlorethane. The thermal stabilities of these cardopolymers were superior to noncardopoly-benzimidazoles.     

Synthesis and electrochemical characterization of fluorene and benzimidazole containing novel conjugated polymers: Effect of alkyl chain length on electrochemical properties

The synthesis and characterization of two donor acceptor type conjugated polymers were investigated. Electrochemical properties were examined by cyclic voltammetry, spectroelectrochemistry and kinetic studies. The increase in the alkyl chain length attached to the fluorene unit was investigated in terms of electrochemical properties. The synthesis was carried out via Stille coupling of 4,7-dibromo-4′-(tert-butyl)spiro[benzo[d]imidazole-2,1′ cyclohexane] and 2,5-bis(tributylstannyl)thiophene with 9,9-dihexyl-9H fluorine (P1) and 9,9-didodecyl-9H fluorene (P2) respectively. Both polymers were neutral state green polymers. They had optical band gaps of 1.55 and 1.47 eV respectively. Increasing the chain length resulted in an increase in solubility and processibility of the polymer. Polymers are multichromic, revealing colors from neutral state green to doped state blue.