基于数据融合的自适应神经网络模糊控制系统设计

基于数据融合的思想，提出一种非线性系统的自适应神经网络模糊控制器的设计方法。该方法利用数据融合技术降低了模糊控制器的输入维数，简化了模糊控制器的设计。用自适应神经模糊推理系统的神经网络自学习功能完成模糊控制器的设计。仿真结果表明，自适应神经网络模糊控制系统性能优于采用普通的模糊控制器的情况，为数据融合与智能系统技术在非线性系统中的应用作了有益的探索.     

基于观测器的机械手神经网络自适应控制

提出了一种基于观测器的机械手神经网络自适应轨迹跟随控制器设计方法,这里机 械手的动力学非线性假设是未知的,并且假设机械手仅有关节角位置测量.文中采用一个线 性观测器重构机械手的关节角速度,用神经网络逼近修正的机械手动力学非线性,改进系统 的跟随性能.基于观测器的神经网络自适应控制器能够保证机械手角跟随误差和观测误差的 一致终结有界性以及神经网络权值的有界性,最后给出了机械手神经网络自适应控制器-观 测器设计的主要理论结果,并通过数字仿真验证了所提方法的性能.     

不确定机器人的自适应神经网络控制与学习

针对具有未知动态的电驱动机器人,研究其自适应神经网络控制与学习问题.首先,设计了稳定的自适应神经网络控制器,径向基函数(RBF)神经网络被用来逼近电驱动机器人的未知闭环系统动态,并根据李雅普诺夫稳定性理论推导了神经网络权值更新律.在对回归轨迹实现跟踪控制的过程中,闭环系统内部信号的部分持续激励(PE)条件得到满足.随着PE条件的满足,设计的自适应神经网络控制器被证明在稳定的跟踪控制过程中实现了电驱动机器人未知闭环系统动态的准确逼近.接着,使用学过的知识设计了新颖的学习控制器,实现了闭环系统稳定、改进了控制性能.最后,通过数字仿真验证了所提控制方法的正确性和有效性.     

对迟滞三明治系统基于Duhem算子的自适应控制

对具有迟滞非线性的三明治系统,设计了基于Duhem算子的神经网络自适应控制器.首先对前端动态子系统进行近似补偿;然后用Duhem算子描述所提出的迟滞状态,用神经网络逼近迟滞状态与迟滞输出的关系,实现对迟滞非线性的建模.基于该迟滞模型并采用伪控制技术设计神经网络自适应控制器,通过Lyapunov方法证明了系统的稳定性,并推导出神经网络的权值自适应调整律和控制律.最后通过仿真验证了该方案的有效性.     

基于RBF神经网络的一类不确定非线性系统自适应H∞控制

基于RBF神经网络提出了一种H∞自适应控制方法.控制器由等效控制器和H∞控制器两部分组成.用RBF神经网络逼近非线性函数,并把逼近误差引入到网络权值的自适应律中用以改善系统的动态性能.H∞控制器用于减弱外部干扰及神经网络的逼近误差对跟踪的影响.所设计的控制器不仅保证了闭环系统的稳定性,而且使外部干扰及神经网络的逼近误差对跟踪的影响减小到给定的性能指标.最后给出的算例验证了该方法的有效性.     

半主动悬架神经网络自适应控制研究

本文针对半主动空气悬架这种时变的、非线性复杂系统,提出基于神经网络的自适应控制策略,设计了神经网络辨识器和控制器.通过仿真计算和分析验证了其可行性和有效性.     

基于神经网络与多模型的非线性自适应广义预测控制

针对一类不确定非线性离散时间动态系统, 提出了基于神经网络与多模型的非线性广义预测自适应控制方法. 该自适应控制方法由线性鲁棒广义预测自适应控制器, 神经网络非线性广义预测自适应控制器和切换机制三部分构成. 线性鲁棒广义预测自适应控制器保证闭环系统的输入输出信号有界, 神经网络非线性广义预测自适应控制器能够改善系统的性能. 切换策略通过对上述两种控制器的切换, 保证系统稳定的同时, 改善系统性能. 给出了所提自适应方法的稳定性和收敛性分析. 最后通过仿真实例验证了所提方法的有效性.     

不确定非线性系统的模糊鲁棒跟踪控制

提出了一种基于T-S模糊型的鲁捧自适应跟踪控制方法.整个控制方案在结合所有 的局部线性状态反馈控制器的基础上,引入了基于自适应神经网络的鲁棒控制器.所提出的 模糊自适应鲁棒控制器设计方法不需要求取李亚普诺夫方程的公共解,不要求系统的不确定 性项满足任何匹配条件或约束条件所提出的带有补偿项的完全自适应RBF神经网络,通过 在线自适应调整RBF神经网络的权重、函数中心和宽度,提高了神经网络的学习能力,可以 有效地对消系统的未知不确定性的影响.同时通过自适应补偿项来在线估计神经网络的近似 误差边界,弥补了神经网络的不足.所提出的方案保证了闭环系统的稳定性,有效地提高了 系统的鲁棒性和跟踪性能.仿真实例表明了所提出方法的有效性.     

一类不确定非线性系统反步自适应神经网络控制研究

针对合有高阶不确定扰动项且不可参数线性化的一类非线性系统，采用反步递推方法设计基于多层神经网络的自适应控制器，多层神经网络可较好地逼近非线性系统，其权值能在系统先验知识不多的情况下在线调整，给出了神经网络Lyapunov意义下稳定的在线自适应律，在设计控制器的过程中，采用类加权形式Lyapunov函数，使得控制器能有效处理自适应控制奇异性问题，仿真结果表明，该控制器对系统参数的不确定性和有界干扰具有一定的鲁棒性，并能保证闭环系统全局稳定。     

基于模型跟随的神经网络PID飞行控制律设计

为了抑制飞行控制系统的外部扰动和建模误差,应用模型跟随自适应神经网络PID控制方法,进行飞行控制律设计。首先使用RBF神经网络进行飞行系统模型辨识,在线学习系统正向输入输出特性,辨识对象的Jacobian信息;然后应用BP神经网络实时在线调整PID参数,设计自适应神经网络PID控制器,控制飞行状态变量跟随模型输出;最后以F-8飞机纵向飞行控制系统为研究对象进行控制仿真。仿真结果表明,设计的控制器具有很强的自适应和抗干扰能力。     

基于迭代神经动态规划的数据驱动非线性近似最优调节

利用数据驱动控制思想,建立一种设计离散时间非线性系统近似最优调节器的迭代神经动态规划方法.提出针对离散时间一般非线性系统的迭代自适应动态规划算法并且证明其收敛性与最优性.通过构建三种神经网络,给出全局二次启发式动态规划技术及其详细的实现过程,其中执行网络是在神经动态规划的框架下进行训练.这种新颖的结构可以近似代价函数及其导函数,同时在不依赖系统动态的情况下自适应地学习近似最优控制律.值得注意的是,这在降低对于控制矩阵或者其神经网络表示的要求方面,明显地改进了迭代自适应动态规划算法的现有结果,能够促进复杂非线性系统基于数据的优化与控制设计的发展.通过两个仿真实验,验证本文提出的数据驱动最优调节方法的有效性.     

Adaptive finite-time neural network control for nonlinear stochastic systems with state constraints

This paper focuses on the adaptive finite-time neural network control problem for nonlinear stochastic systems with full state constraints. Adaptive controller and adaptive law are designed by backstepping design with log-type barrier Lyapunov function. Radial basis function neural networks are employed to approximate unknown system parameters. It is proved that the tracking error can achieve finite-time convergence to a small region of the origin in probability and the state constraints are confirmed in probability. Different from deterministic nonlinear systems, here the stochastic system is affected by two random terms including continuous Brownian motion and discontinuous Poisson jump process. Therefore, it will bring difficulties to the controller design and the estimations of unknown parameters. A simulation example is given to illustrate the effectiveness of the designed control method.     

一种自适应CMAC在交流励磁水轮发电系统中仿真研究

在分析常规CMAC结构的基础上,针对一类非线性、参数时变和不确定的控制系统,提出了一种自适应CMAC神经网络的控制器．该控制器以系统动态误差和给定信号量作为CMAC的激励信号,并与自适应线性神经元网络相结合构成系统的复合控制．为了验证其有效性,将其应用到交流励磁水轮发电机系统的多变量非线性控制中,并与常规的PID控制效果进行了比较．仿真结果表明,该控制器具有较强鲁棒性和自适应能力,控制品质优良。     

Neural-network-based robust adaptive control for a class of nonlinear systems

In this study, a robust adaptive control (RAC) system is developed for a class of nonlinear systems. The RAC system is comprised of a computation controller and a robust compensator. The computation controller containing a radial basis function (RBF) neural network is the principal controller, and the robust compensator can provide the smooth and chattering-free stability compensation. The RBF neural network is used to approximate the system dynamics, and the adaptive laws are derived to on-line tune the parameters of the neural network so as to achieve favorable estimation performance. From the Lyapunov stability analysis, it is shown that all signals in the closed-loop RBAC system are uniformly ultimately bounded. To investigate the effectiveness of the RAC system, the design methodology is applied to control two nonlinear systems: a wing rock motion system and a Chua’s chaotic circuit system. Simulation results demonstrate that the proposed RAC system can achieve favorable tracking performance with unknown of the system dynamics.     

Adaptive neural control of MIMO nonlinear state time-varying delay systems with unknown dead-zones and gain signs

In this paper, adaptive neural control is proposed for a class of uncertain multi-input multi-output (MIMO) nonlinear state time-varying delay systems in a triangular control structure with unknown nonlinear dead-zones and gain signs. The design is based on the principle of sliding mode control and the use of Nussbaum-type functions in solving the problem of the completely unknown control directions. The unknown time-varying delays are compensated for using appropriate Lyapunov-Krasovskii functionals in the design. The approach removes the assumption of linear functions outside the deadband as an added contribution. By utilizing the integral Lyapunov function and introducing an adaptive compensation term for the upper bound of the residual and optimal approximation error as well as the dead-zone disturbance, the closed-loop control system is proved to be semi-globally uniformly ultimately bounded. Simulation results demonstrate the effectiveness of the approach.     

Adaptive variable structure control of MIMO nonlinear systems with time-varying delays and unknown dead-zones

In this paper, adaptive variable structure neural control is presented for a class of uncertain multi-input multi-output （MIMO） nonlinear systems with state time-varying delays and unknown nonlinear dead-zones. The unknown time-varying delay uncer- tainties are compensated for using appropriate Lyapunov-Krasovskii functionals in the design. The approach removes the assumption of linear function outside the deadband without necessarily constructing a dead-zone inverse as an added contribution. By utilizing the integral-type Lyapunov function and introducing an adaptive compensation term for the upper bound of the residual and optimal approximation error as well as the dead-zone disturbance, the closed-loop control system is proved to be semi-globally uniformly ultimately bounded. In addition, a modified adaptive control algorithm is given in order to avoid the high-frequency chattering phenomenon. Simulation results demonstrate the effectiveness of the approach.     

变结构神经网络自适应鲁棒控制

针对一类不确定非线性系统, 提出一种变结构神经网络自适应鲁棒控制(Variable structure neural network adaptive robust control, VSNNARC)方法. 其中变结构神经网络用于在线辨识系统未知非线性函数, 该网络利用节点激活与催眠技术进行动态调节, 减小网络规模与计算量; 自适应鲁棒控制用于网络权值学习与系统建模误差及外部扰动补偿. 采用Lyapunov稳定性分析法, 给出网络权值自适应律的形式以及鲁棒控制项的设计方法. 该方法不仅能保证系统的稳定性, 也能保证系统具有很好的瞬态性能. 将该方法应用到转台伺服系统的位置跟踪控制中, 实际运行结果表明, 该方法使系统具有很强的鲁棒性及良好的跟踪效果.     

Learning from neural control of nonlinear systems in normal form

A deterministic learning theory was recently proposed which states that an appropriately designed adaptive neural controller can learn the system internal dynamics while attempting to control a class of simple nonlinear systems. In this paper, we investigate deterministic learning from adaptive neural control (ANC) of a class of nonlinear systems in normal form with unknown affine terms. The existence of the unknown affine terms makes it difficult to achieve learning by using previous methods. To overcome the difficulties, firstly, an extension of a recent result is presented on stability analysis of linear time-varying (LTV) systems. Then, with a state transformation, the closed-loop control system is transformed into a LTV form for which exponential stability can be guaranteed when a partial persistent excitation (PE) condition is satisfied. Accurate approximation of the closed-loop control system dynamics is achieved in a local region along a recurrent orbit of closed-loop signals. Consequently, learning of control system dynamics (i.e. closed-loop identification) from adaptive neural control of nonlinear systems with unknown affine terms is implemented.     

Adaptive smart card-based pull control systems in context-aware manufacturing systems: Training a neural network through multi-objective simulation optimization

Nowadays, context aware manufacturing systems offer interesting capabilities to improve the performance of pull controlled production systems. Smart Kanbans can be used instead of physical cards, and the information become available about the production context, collected for example through sensors and RFID. Such information can be exploited by intelligent pull control strategies so as to dynamically adapt the number of cards. This is particularly useful for production systems that are subjected to unpredictable changes in the customers’ demand, and need to react quickly to preserve a high level of performance. For this reason, we aim, in this article, at proposing an intelligent system, which can communicate with the information system, whose purpose is to autonomously decide or to help managers in adding or removing cards. In this respect, we propose an approach that uses a neural network which is trained offline, directly from simulation, to decide when it is relevant to change the number of cards, and at what production stage. The learning process, based on multi-objective simulation optimization, aims at reducing the production costs as well as the number of changes to avoid nervousness. The use of stochastic simulation, allows various types of complex problems, related to manufacturing systems, to be addressed and fluctuating demand phenomena to be taken into account. The relevance of our approach is illustrated using six published adaptive ConWIP and Kanban systems. Comparisons with adaptive Kanban and ConWIP systems show that the neural network can automatically learn very relevant knowledge. Good results are obtained in terms of performance, with fewer changes in the number of cards. Several possible future research directions are pointed out.     

Adaptive L_2 control of nonlinear systems using neural networks

An adaptive neural network controller is developed to achieve output-tracking of a class of nonlinear systems. The global L2 stability of the closed-loop system is established. The proposed control design overcomes the limitation of the conventional adaptive neural control design where the modeling error brought by neural networks is assumed to be bounded over a compact set. Moreover,the generalized matching conditions are also relaxed in the proposed L2 control design as the gains for the external disturbances entering the system are allowed to have unknown upper bounds.