电液比例位置同步线性自抗扰控制

电液比例位置同步液压系统受到元件安装精度、死区非线性以及系统参数摄动等因素的影响,导致两侧子系统性能不一致进而引起位置不同步.针对这一问题,提出由位置控制器、死区补偿器、同步控制器组成的复合控制方案.首先,建立电液比例位置控制系统数学模型,并分析系统内部参数摄动及比例阀死区特性对同步控制精度造成的影响.在此基础上,设计线性自抗扰同步控制器,实现对系统内外扰动的实时估计与主动补偿,同时为提高液压缸动态性能,减小稳态误差,设计了比例阀死区补偿器.仿真和实验结果表明,自抗扰控制器有效地抑制了内外扰动,提高了位置同步控制精度,而死区补偿器的引入改善了系统动态响应性能,降低了稳态位置同步误差.     

气动加载系统的建模及非线性自抗扰控制

针对电气比例阀控气动加载系统压力跟踪控制存在系统参数不确定性、时滞性、强耦合等非线性问题,提出一种非线性自抗扰控制(ADRC)方法.首先建立电气比例阀控气动加载系统的动态机理模型;然后,在考虑外部存在未知扰动及负载波动等情况下,设计扩张状态观测器以对系统的耦合项及外部扰动等不确定项进行估计,并采用非线性误差反馈律给予实时主动补偿,从而实现系统加载压力的实时控制.仿真和实验结果表明,在ADRC控制下系统不仅具有良好的跟踪性能,响应速度快,抗干扰能力强,而且在工程上易于实现.     

具有输入齿隙的一类非线性不确定系统自适应鲁棒控制

针对一类具有未知输入齿隙、参数不确定以及未建模动态和干扰的非线性系统,设计了自适应鲁棒控制器.将齿隙非线性模型等价表示为具有有界建模误差的全局线性化模型,在此基础上设计了包含自适应模型补偿、反馈稳定和鲁棒反馈3部分的自适应鲁棒控制器,并给出了系统动态跟踪误差和稳态误差指标.理论分析证明,闭环控制系统信号有界且跟踪误差在任意期望的精度范围内,仿真研究验证了所提出方法的有效性.     

位置和速度受限的微型无人直升机轨迹跟踪控制器

针对微型无人直升机在狭窄空间中的轨迹跟踪问题,设计了一种可以限制直升机位置和速度的跟踪控制器.首先将直升机的模型简化为一个未建模的动态模型.基于简化模型利用受限反步法设计控制器,其中在位置控制回路用障碍李雅普诺夫函数代替传统的纯二次型李雅普诺夫函数,以此来限制直升机的位置和速度;用指令滤波器对反步过程中虚拟控制的导数进行估计,避免了复杂的解析计算.此外,将未建模动态和指令滤波器误差合并成有界扰动项,并设计了自适应算法对扰动的上界进行估计和补偿.稳定性分析证明了直升机的闭环跟踪误差最终一致有界,且位置和速度始终位于预设的限制集合中.仿真结果验证了该控制器的有效性.     

推力矢量可倾转四旋翼自抗扰飞行控制方法

针对常规四旋翼难以实现位置和姿态独立控制问题, 研究了一种具有全向推力矢量的可倾转四旋翼飞行 器系统. 为克服系统的大范围不确定性、强耦合性及外部风扰影响, 设计了基于自抗扰控制(ADRC)技术的飞行控 制器. 通过建立风扰下的系统动力学模型, 分析阵风对旋翼气动力的影响. 接着将系统解耦为六通道单回路结构并 分别设计自抗扰控制器, 引入扩张状态观测器估计系统的内外扰动, 利用非线性状态误差反馈律输出扰动补偿控 制. 在此基础上, 通过变量代换线性化控制分配矩阵, 将控制器输出直接映射到旋翼转速和倾转角. 仿真结果表明, 所设计的自抗扰飞行控制器具有良好的位置和姿态独立控制能力, 能够有效地估计和补偿紊流风扰动, 同时对系统 的部分动力失效故障有较强的鲁棒性.     

高阶不确定非线性系统的线性自抗扰控制

针对一类具有内部动态和外部扰动未知的SISO高阶非线性系统,提出一种通用的线性自抗扰控制方案.该方案基于单参数调节的高增益观测器思想,分别设计线性跟踪微分器、线性扩张状态观测器和线性状态误差反馈控制律.利用Lagrange中值定理和Cauchy-Schwarz不等式将系统总扰动的微分值转化为关于系统估计和跟踪误差的函数,可以解决因系统控制增益未知所导致的控制量微分值难以预先确定的问题.在此基础上,基于Lyapunov稳定性定理证明闭环系统误差信号有界,并进一步分析得到系统估计和跟踪误差与控制器参数的定量关系,即都可以随观测器增益的增大而达到无限小.仿真比较结果验证了所提出方案的有效性,与韩式自抗扰控制方案相比,该方案结构简单,调节参数少,易于工程实现.     

基于ESO的船舶航向鲁棒自适应控制

针对具有内部未建模动态和外部不确定扰动的水面船舶设计一种鲁棒自适应航向控制器,并同时解决转向过程中的漂角补偿问题.基于二阶非线性Nomoto模型和一阶漂角模型,建立非积分链结构的漂角-航向非线性状态空间模型,将航向控制系统未建模动态与外部不确定扰动合并为复合扰动,应用扩张状态观测器估计模型中的未测量状态和系统复合扰动.基于Lyapunov稳定性理论和自适应反步法设计航向状态反馈控制规律,为避免反步法控制过程中的微分爆炸问题,采用动态面控制技术获取虚拟控制信号的近似导数.所提出的扩张状态观测器和航向控制算法能够保证闭环系统内所有误差信号一致最终有界,提高航向保持和转向过程中的航向跟踪精度.仿真结果验证了所提出的航向控制规律的有效性.     

带有未建模动态的船舶减摇鳍的鲁棒自适应控制

针对船舶减摇鳍非线性数学模型,提出一种鲁棒自适应控制器,可以用于存在非线性不确定、未知有界扰动和未建模动态的情况。应用Lyapunov稳定性理论证明,所提出的鲁棒自适应控制器可保证整个非线性系统的稳定性,且通过适当选择设计参数,可使跟踪误差达到任意精度。仿真结果表明了所提方法的有效性。     

基于自抗扰技术的光伏发电并网控制系统

单相可再生能源并网发电系统是一非线性系统,受电网和环境的影响,系统存在较强的外部干扰和非线性不确定因素.针对系统的工作特点,采用自抗扰控制技术来实现对系统的有效控制.系统利用自抗扰控制器(ADRC)的扩张状态观测器,来对系统模型中的不确定因素和外扰进行动态观测,使系统对扰动具有很好的适应能力.并在系统的扩张状态观测器和非线性状态误差控制器中引入非线性幂指数函数,使系统运算变得更加简单.仿真结果表明所设计的控制器具有良好的动态性能和较强的鲁棒性,即本文所设计的系统是可行的.     

未知初始跟踪条件的非线性系统预设性能有限时间有界$H_infty$控制

研究一类具有外部扰动的非线性系统在初始跟踪条件未知情况下的预设性能有限时间有界$H_\infty$控制问题.针对预设性能控制设计,提出一个新的误差转换思想,并据此设计新的预设性能函数,解决预设性能控制依赖于系统被约束量初始条件的问题.基于所提出预设性能函数、有限时间控制理论以及有界$H_\infty$的设计方法,获得系统无需初始跟踪条件的预设性能有限时间有界$H_\infty$控制器,同时解决非线性系统在有界稳定情况下难以设计$H_\infty$控制器的问题,保证跟踪误差以预先设定的动态性能在有限时间内收敛至平衡点附近的小邻域内,并对外部干扰有较强的鲁棒性能.     

Robust cooperative output tracking of networked high-order power integrators systems

This paper focuses on a robust cooperative output tracking problem of networked power integrator systems. The dynamics of each system is considered as a nonlinear high-order power integrator whose linearised model is uncontrollable around its origin. It is proven via Lyapunov Theory that under some mild assumptions and graph structural properties, all agents’ outputs in the network can be synchronised to a desired trajectory with a bounded error in the presence of external disturbances as well as model uncertainties. Moreover, the tracking performance can be tuned by appropriately choosing parameters within the controller. The proposed controller for each agent is in the essence constructed via backstepping technique consisting of three components: the state feedback of its own, the outputs of its neighbours and the information of the desired trajectory if connected, and thus in a distributed manner.     

卫星姿态直接自适应模糊预测控制

对具有模型不确定性和未知外干扰的卫星姿态系统提出了多输入多输出直接自适应模糊预测跟踪控制设计方法. 此方法先基于卫星姿态动力学模型设计出非线性广义预测控制律, 再构造直接自适应模糊控制器逼近预测控制律中因模型不确定性引起的未知项. 文中证明了所设计的控制律能使卫星跟踪给定的期望姿态轨迹, 跟踪误差收敛到原点的小邻域内. 仿真结果验证了此方法的有效性.     

大纯滞后系统的自适应补偿控制

针对工业过程中普遍存在的纯滞后对象的控制问题,提出了一种带误差补偿环节的模型参考自适应控制方法。仿真结果表明,这种自适应控制器对于一类大纯滞后系统的控制具有比较好的控制效果,且结构简单,有一定的鲁棒性。     

Nonlinear Decoupling PID Control Using Neural Networks and Multiple Models

For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential （PID） controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.     

Nonlinear Decoupling PID Control Using Neural Networks and Multiple Models

For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential (PID) controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.     

A globally stable saturated desired compensation adaptive robust control for linear motor systems with comparative experiments

The recently proposed saturated adaptive robust controller is integrated with desired trajectory compensation to achieve global stability with much improved tracking performance. The algorithm is tested on a linear motor drive system which has limited control effort and is subject to parametric uncertainties, unmodeled nonlinearities, and external disturbances. Global stability is achieved by employing back-stepping design with bounded (virtual) control input in each step. A guaranteed transient performance and final tracking accuracy is achieved by incorporating the well-developed adaptive robust controller with effective parameter identifier. Signal noise that affects the adaptation function is alleviated by replacing the noisy velocity signal with the cleaner position feedback. Furthermore, asymptotic output tracking can be achieved when only parametric uncertainties are present.     

Robust H∞ Tracking Control of Uncertain Robotic Systems with Periodic Disturbances

This paper addresses the problem of designing robust tracking control for a large class of uncertain robotic systems. A more general model of the external disturbance is employed in the sense that the external disturbance can be expressed as the sum of a modeled disturbance and an unmodeled disturbance, for example, any periodic disturbance can be expressed in this general form. An adaptive neural network system is constructed to approximate the behavior of unknown robot dynamics. An adaptive control algorithm is designed to estimate the behavior of the modeled disturbance, and in turn the robust H_∞ control algorithm is required to attenuate the effects of the unmodeled disturbance only. Consequently, an intelligent adaptive/robust tracking control scheme is constructed such that an H_∞ tracking control is achieved in the sense that all the states and signals of the closed‐loop system are bounded and the effect due to the unmodeled disturbance on the tracking error can be attenuated to any preassigned level. Finally, simulations are provided to demonstrate the effectiveness and performance of the proposed control algorithm.     

非线性系统迭代跟踪控制的批次遗忘学习算法

针对P型迭代学习算法对初始偏差和输出误差扰动敏感,以及PD型迭代学习算法容易放大系统噪声,降低系统鲁棒性的问题,研究了具有任意有界扰动及期望输出的重复运行非线性时变系统的PD型迭代学习跟踪控制算法.利用迭代学习过程记忆的期望轨迹、期望控制以及跟踪误差,给出基于变批次遗忘因子的学习控制器设计,并借助λ范数理论和Bellman-Gronwall不等式,讨论保证闭环跟踪系统批次误差有界的学习增益存在的充分必要条件,及分析控制算法的一致收敛性.本算法改善了系统的鲁棒性和动态特性,单关节机械臂的跟踪控制仿真验证了方法的有效性.     

Tracking of a moving ground target by a quadrotor using a backstepping approach based on a full state cascaded dynamics

In this paper, a tracking controller is formulated for a quadrotor to track a moving ground target. The quadrotor exhibits distinct hierarchical dynamics that allows its position to be controlled by its attitude. This motivates the use of backstepping control on the underactuated quadrotor. Most backstepping architecture controls the quadrotor position and attitude independently, and couples them with inverse kinematics. Inverse kinematics computes the attitude angles required to achieve a desired acceleration. However unmodeled effects are shown to cause inexact inversion resulting in tracking error. The approach proposed in this paper uses a re-formulated full state cascaded dynamics to eliminate the need for inverse kinematics in a full state backstepping control architecture. It is shown that zero steady state error is achieved in the presence of unmodeled aerodynamics effect and wind disturbance despite no integral action. In addition, a backstepping formulation is derived using contraction theory that guarantees the boundedness of state response under bounded disturbances such as wind. This improves the system performance. Numerical simulations are performed using the proposed controller to track a target moving along predefined paths and the results are compared with a benchmark controller derived using inverse kinematics. The results show that the proposed controller is able to achieve better tracking performance under unmodeled aerodynamic effects and wind disturbance as compared with the benchmark controller.     

Control of a nonholonomic mobile robot using neural networks

A control structure that makes possible the integration of a kinematic controller and a neural network (NN) computed-torque controller for nonholonomic mobile robots is presented. A combined kinematic/torque control law is developed using backstepping and stability is guaranteed by Lyapunov theory. This control algorithm can be applied to the three basic nonholonomic navigation problems: tracking a reference trajectory, path following, and stabilization about a desired posture. Moreover, the NN controller proposed in this work can deal with unmodeled bounded disturbances and/or unstructured unmodeled dynamics in the vehicle. Online NN weight tuning algorithms do not require off-line learning yet guarantee small tracking errors and bounded control signals are utilized.