Corrosion inhibitors part V: QSAR of benzimidazole and 2-substituted derivatives as corrosion inhibitors by using the quantum chemical parameters

Quantum chemical SCF calculations of some parameters of benzimidazoles were correlated with their inhibition efficiency in case of steel in aqueous acidic medium. Geometric structures, total negative charge on the molecule (TNC), highest occupied molecular orbital (E_HOMO), lowest unoccupied molecular orbital (E_LUMO), dipole moment (μ) and linear solvation energy terms, molecular volume (Vi) and dipolar-polarization (π*) were correlated to corrosion inhibition efficiency. The correlation between quantum parameters obtained by AM1 calculation and experimental inhibition efficiency has been validated by single point calculations for the semi-empirical AM1 structure using B3LYP/6-31G* as a higher level of theory. Equations were proposed using linear regression analysis to calculate corrosion inhibition efficiency. It was established that the increase of the orbital energies E_HOMO favors the inhibition efficiency toward steel corrosion. The proposed linear equations were applied to predict the corrosion inhibition efficiency of some related structures in order to select molecules of possible activity from a library compounds.     

Inhibition of mild steel corrosion in hydrochloric acid solution by triazole derivatives: Part I. Polarization and EIS studies

A comparative study of 5-amino-1,2,4-triazole (5-ATA), 5-amino-3-mercapto-1,2,4-triazole (5-AMT), 5-amino-3-methylthio-1,2,4-triazole (5-AMeTT) and 1-amino-3-methylthio-1,2,4-triazole (1-AMeTT) as inhibitors for mild steel corrosion in 0.1 M HCl solution at 20 °C was carried out. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were applied to study the metal corrosion behaviour in the absence and presence of different concentrations of these inhibitors under the influence of various experimental conditions. Measurements of open circuit potential (OCP) as a function of time till reaching the steady-state potentials (E_st) were also established. The studies have shown that 5-AMT was the most efficient inhibitor reaching values of inhibition efficiency (IE%) up to 96% at a concentration of 10⁻³ M. Polarization curves showed that the four studied compounds act as mixed inhibitors. The potential of zero charge (PZC) of mild steel was determined in 0.1 M HCl in the absence and presence of the studied inhibitors. The effect of chemical structure of the four tested inhibitors was discussed. Results obtained from OCP versus time, polarization and impedance measurements are in good agreement.     

Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations: Part II. Evaluation of microcracking

A method for non-destructive detection of microcracks in ceramic composites is described. The method involves the combination of ultrasound characterisation with the application of a three-phase micromechanical model, which considers cracks and pores as void constituents. Four alumina-aluminium titanate materials with different levels of microcracking, from no cracks (monophase alumina) to severely cracked (alumina + 40 vol.% of aluminium titanate) including an alumina + 10 vol.% aluminium titanate material with incipient microcracking have been developed to test the validity of the method. Specimens have been fabricated by colloidal processing and the longitudinal and transverse ultrasound velocities have been determined by the ultrasonic pulse-echo and transmission ultrasound-immersion techniques, employing a digital signal processing. It has been demonstrated that it is possible to differentiate between pores and microcracks, both modelled as void constituents, in terms of the aspect ratio.