有机无机杂化膜材料的制备技术

有机无机杂化膜兼有机膜韧性和无机膜耐高温性能,具有优良的气体渗透选择性,成为高分子化学和材料科学等领域的研究热点.本文综述了近年来有机无机杂化膜材料的制备技术进展,着重探讨了溶胶-凝胶法制备聚酰亚胺类杂化膜材料的研究状况,并作了简要述评。     

有机-无机杂化膜的研究进展

有机-无机杂化膜结合了传统有机膜与无机膜的优良性能,已成为膜领域的研究热点之一。本文综述了有机-无机杂化膜的研究现状,归纳了有机-无机杂化膜的分类、制备技术、应用及其优越性,并针对现存的问题及今后的研究发展提出了一些建议。     

有机-无机杂化膜的研究进展

有机-无机杂化膜由于具备了无机膜和有机膜各自的特点,具有良好的分离特性和物化稳定性,因而成为当前膜技术领域新型膜材料研究的热点.本文主要介绍了近年来国内外有机-无机杂化膜的研究现状、杂化膜的制备方法、结构和应用.     

有机-无机杂化骨修复材料

寻找理想的骨修复材料一直是骨科领域的研究热点之一。骨修复材料已由最初单纯取代天然骨组织的惰性材料向具有诱导骨组织再生功能的生物活性材料发展,其中有机-无机杂化材料由于有机和无机组分在分子/纳米水平的复合使其能够最大程度地实现二者的优势互补和协同优化,近年来受到广泛关注。本文着重介绍了有机-无机杂化骨修复材料近些年来的研究进展,并对其发展趋势进行了展望。     

溶胶-凝胶法制备光固化聚氨酯丙烯酸酯杂化材料的研究

以溶胶-凝肢法制备的硅溶胶为无机相,聚氨酯丙烯酸酯为有机相,以γ-甲基丙烽酰氧丙基三甲氧基硅烷(TMSPM)为两相间的偶联剂,制得了光固化杂化材料。研究了未固化的杂化体系的稳定性问题,并对其进行了结构表征和性能研究。无机相与有机相通过共价键相连。使得杂化体系光固化膜高硬度的获得并没有以柔韧性的损失为代价。在无机物含量较低时,聚氨酯丙烯酸酯／二氧化硅杂化体系先固化膜的耐磨性略有提高。     

锰钒氧无机-有机杂化材料

氧化锰、钒氧簇构筑块经与有机组分组合可形成新型结构的锰钒氧无机-有机杂化材料。人们预测锰钒氧无机-有机杂化材料将兼有金属锰配合物和钒氧无机-有机杂化材料结构的多样性、独特的物理性质和广阔的应用前景。本文综述了近年来锰钒氧无机-有机杂化材料的合成、组成、结构及有关性质的研究与进展。     

制备有机-无机杂化纳米材料的研究进展

有机-无机杂化纳米材料由于小尺寸和兼具有机、无机材料的各种优良性质,在许多领域都有巨大的应用潜质。本文介绍了模板法、嵌段聚合物自组装、含特殊官能团的乙烯基单体直接聚合法等制备纳米有机-无机杂化材料的方法,并对各自的特点进行了说明。     

溶胶-凝胶法合成有机/无机杂化材料进展--2.组分间以次价力作用的有机/无机杂化材料

介绍了溶胶-凝胶法(Sol-gelprocess)制备组分间以次价力作用的有机/无机杂化材料的基本情况,根据合成方法进行分类,并指出其发展趋势。     

含钒无机有机杂化材料的合成、结构与性质

含钒无机有机杂化材料的结构复杂多样,在吸附、氧化还原、电化学、催化、光学、磁学以及多孔、手性材料研究等方面应用前景广阔,引起人们广泛关注。本文综述了含钒无机有机杂化材料研究的最新进展,介绍了合成含钒无机有机杂化材料的主要方法,按照有机组分与无机骨架作用的方式分类总结了含钒无机有机杂化材料的结构,介绍了其在离子交换、电化学、磁学、光学、催化等方面的应用,并展望了该类材料的研究前景和意义。     

溶胶-凝胶法合成有机/无机杂化材料进展——1.组分间以化学键作用的有机/无机杂化材料

介绍了溶胶－凝胶法（Sol-gel process)制备组分间以化学键作用的有机／无机杂化材料的基本情况,根据合成方法进行分类,并指出其发展趋势。     

Design and properties of functional hybrid organic-inorganic membranes for fuel cells

This critical review presents a discussion on the major advances in the field of organic-inorganic hybrid membranes for fuel cells application. The hybrid organic-inorganic approach, when the organic part is not conductive, reproduces to some extent the behavior of Nafion where discrete hydrophilic and hydrophilic domains are homogeneously distributed. A large variety of proton conducting or non conducting polymers can be combined with various functionalized, inorganic mesostructured particles or an inorganic network in order to achieve high proton conductivity, and good mechanical and chemical properties. The tuning of the interface between these two components and the control over chemical and processing conditions are the key parameters in fabricating these hybrid organic-inorganic membranes with a high degree of reproducibility. This dynamic coupling between chemistry and processing requires the extensive use and development of complementary ex situ measurements with in situ characterization techniques, following in real time the molecular precursor solutions to the formation of the final hybrid organic-inorganic membranes. These membranes combine the intrinsic physical and chemical properties of both the inorganic and organic components. The development of the sol-gel chemistry allows a fine tuning of the inorganic network, which exhibits acid-based functionalized pores (-SO(3)H, -PO(3)H(2), -COOH), tunable pore size and connectivity, high surface area and accessibility. As such, these hybrid membranes containing inorganic materials are a promising family for controlling conductivity, mechanical and chemical properties (349 references).     

杂化太阳电池中异质结界面的修饰及其对电池光电性能的影响

有机-无机杂化太阳电池综合了有机、无机材料的优点,成本低、理论效率高,受到人们的广泛关注.杂化太阳电池的光活性层由无机半导体和有机共轭聚合物复合而成.当光照射到活性层上时,共轭聚合物吸收光子产生激子(电子-空穴对);激子迁移到有机给体-无机受体的异质结界面处发生解离而产生自由电子和空穴;自由电子和空穴分别向无机半导体和有机聚合物传输,从而实现电荷的分离和传导.激子在有机-无机异质结界面处的分离效率是影响电池性能的一个重要因素.有机、无机两相材料往往因为接触面积小以及相容性差使此两相材料接触不佳,激子迁移到此界面不能有效分离,从而严重影响了杂化太阳电池的效率.这个问题可以通过此界面的修饰加以改善.本文即综述了有机-无机异质结界面修饰的方法、作用和意义,并展望了杂化太阳电池未来的发展趋势和应用前景.     

Anti-trade-off in dehydration of ethanol by novel PVA/APTEOS hybrid membranes

Novel organic–inorganic hybrid membranes were prepared through sol–gel reaction of poly(vinyl alcohol) (PVA) with γ-aminopropyl-triethoxysilane (APTEOS) for pervaporation (PV) separation of ethanol/water mixtures. The membranes were characterized by FTIR, EDX, WXRD and PALS. The amorphous region of the hybrid membranes increased with increasing APTEOS content, and both the free volume and the hydrophilicity of the hybrid membranes increased when APTEOS content was less than 5 wt%. The swelling degree of the hybrid membranes has been restrained in an aqueous solution owing to the formation of hydrogen and covalent bonds in the membrane matrix. Permeation flux increased remarkably with APTEOS content increasing, and water permselectivity increased at the same time, the trade-off between the permeation flux and water permselectivity of the hybrid membranes was broken. The sorption selectivity increased with increasing temperature, and decreased with increasing water content. In addition, the diffusion selectivity and diffusion coefficient of the permeants through the hybrid membranes were investigated. The hybrid membrane containing 5 wt% APTEOS has highest separation factor of 536.7 at 50 °C and permeation flux of 0.0355 kg m⁻² h⁻¹ in PV separation of 5 wt% water in the feed.     

Inorganic membranes and solid state sciences

The latest developments in inorganic membranes are closely related to recent advances in solid state science. Sol–gel processing, plasma-enhanced chemical vapor deposition and hydrothermal synthesis are methods that can be used for inorganic membrane preparation. Innovative concepts from material science (templating effect, nanophase materials, growing of continuous zeolite layers, hybrid organic–inorganic materials) have been applied by our group to the preparation of inorganic membrane materials. Sol–gel-derived nanophase ceramic membranes are presented with current applications in nanofiltration and catalytic membrane reactors. Silica membranes with an ordered porosity, due to liquid crystal phase templating effect, are described with potential application in pervaporation. Defect-free and thermally stable zeolite membranes can be obtained through an original synthesis method, in which zeolite crystals are grown inside the pores of a support. Hybrid organic–inorganic materials with permselective properties for gas separation and facilitated transport of solutes in liquid media, have been successfully adapted to membrane applications. Potential membrane developments offered by CVD deposition techniques are also illustrated through several examples related to the preparation of purely inorganic and hybrid organic–inorganic membrane materials.     

Preparation and applications of hybrid organic-inorganic monoliths: a review

This review presents an overview of the properties of hybrid organic-inorganic monolithic materials and summarizes the recent developments in the preparation and applications of these hybrid monolithic materials. Hybrid monolithic materials with porosities, surface functionalities, and fast dynamic transport have developed rapidly, and have been used in a wide range of applications owing to the low cost, good stability, and excellent performance. Basically, these materials can be divided into two major types according to the chemical composition: hybrid silica-based monolith (HSM) and hybrid polymer-based monolith (HPM). Compared to the HPM, HSM monolith has been attracting most wide attentions, and it is commonly synthesized by the sol-gel process. The conventional preparation procedures of two type's hybrid organic-inorganic monoliths are addressed. Applications of hybrid organic-inorganic monoliths in optical devices, capillary microextraction (CME), capillary electrochromatography (CEC), high performance liquid chromatography (HPLC), and chiral separation are also reviewed.     

Functionalizing inorganic solids: towards organic-inorganic nanostructured materials for intelligent and bioinspired systems

The design, preparation, and properties of organic-inorganic hybrid compounds are described and discussed with respect to their potential uses as intelligent and bioinspired materials. Several synthesis strategies based on intercalation in 2D solids, the grafting of organic groups onto silica and silicates, and the self-assembly of organo-silica materials are presented, focusing on the soft procedures that are used to modify the functionality of the inorganic substrates. The combination of both organic and inorganic moieties at the nanometer level forms the basis for preparing multifunctional solids that are provided with specific functions in response to different types of stimuli. In some cases these resemble materials that are found in biological systems. Examples include organic-inorganic membranes that are based on intercalated macrocyclic compounds and bi-layer vesicles that consist of alkyl long-chains arranged either in the confined region of layered silicates or as self-organized organo-silica micelles. The role of certain hybrid materials such as membranes provides a different approach to the development of artificial liposomes and other mimetic systems that have an organic-inorganic composition and nanostructural organization. Their potential uses for DDS or DNA-dense phases are also discussed and novel alternatives to bioinspired systems development are proposed.     

Research progress on hybrid organic–inorganic perovskites for photo-applications

Hybrid organic–inorganic perovskite materials have attracted significant attention of most researchers in recently years, which is ascribed to the superior photoelectric properties, such as the suitable band gaps for harvesting sunlight, and exhibit high optical adsorption, high charge-carrier lifetimes and long diffusion lengths. The photodetectors, light-emitting diodes, solar cells and photocatalysts represent the remarkable applications for the hybrid organic–inorganic perovskite materials. Herein, we review the recent progress of hybrid organic–inorganic perovskite-based photodetectors, light-emitting diodes, solar cells and photocatalysts. The challenges and outlook for the hybrid organic–inorganic perovskite-based photodetectors, light-emitting diodes, solar cells and photocatalysts are considered.