Planar waveguides in neodymium-doped calcium niobium gallium garnet crystals produced by proton implantation

In this work, the fabrication and optical properties of a planar waveguide in a neodymium-doped calcium niobium gallium garnet(Nd:CNGG) crystal are reported. The waveguide is produced by proton(H~+) implantation at 480 ke V and a fluence of 1.0×10~(17) ions/cm~2. The prism-coupling measurement is performed to obtain the dark mode of the waveguide at a wavelength of 632.8nm. The reflectivity calculation method(RCM) is used to reconstruct the refractive index profile. The finite-difference beam propagation method(FD-BPM) is employed to calculate the guided mode profile of the waveguide.The stopping and range of ions in matter 2010(SRIM 2010) code is used to simulate the damage profile induced by the ion implantation. The experimental and theoretical results indicate that the waveguide can confine the light propagation.     

Optical waveguide in Nd:Bi_(12)SiO_(20) crystal produced by multi-energy C ion implantation

We report the fabrication of a planar waveguide in the Nd:Bi_(12)SiO_(20) crystal by multi-energy C ions at room temperature. The waveguide is annealed at 200℃, 260℃, and 300℃ in succession each for 30 min in an open oven. The effective refractive index profiles at transverse electric(TE) polarization are stable after the annealing treatments. Damage distribution for multi-energy C ion implanted in Nd:Bi_(12)SiO_(20) crystal is calculated by SRIM 2010. The Raman and fluorescence spectra of the Nd:Bi_(12)SiO_(20) crystal are collected by an excitation beam at 633 nm and 473 nm, respectively. The results indicate the stabilization of the optical waveguide in Nd:Bi_(12)SiO_(20) crystal.     

Optical properties of He+-implanted and diamond blade-diced terbium gallium garnet crystal planar and ridge waveguides

Terbium gallium garnet (Tb₃Ga₅O₁₂, TGG) crystal can be used to fabricate various magneto-optical devices due to its optimal Faraday effect. In this work, 400-keV He⁺ ions with a fluence of 6.0×10¹⁶ ions/cm² are irradiated into the TGG crystal for the planar waveguide formation. The precise diamond blade dicing with a rotation speed of 2×10⁴ rpm and a cutting velocity of 0.1 mm/s is performed on the He⁺-implanted TGG planar waveguide for the ridge structure. The dark-mode spectrum of the He⁺-implanted TGG planar waveguide is measured by the prism-coupling method, thereby obtaining the relationship between the reflected light intensity and the effective refractive index. The refractive index profile of the planar waveguide is reconstructed by the reflectivity calculation method. The near-field light intensity distribution of the planar waveguide and the ridge waveguide are recorded by the end-face coupling method. The He⁺-implanted and diamond blade-diced TGG crystal planar and ridge waveguides are promising candidates for integrated magneto-optical devices.     

Analysis of ion implanted waveguides formed on Nd:YVO4 crystals

This work reports, for the first time to our knowledge, the formation of planar waveguides in Nd:YVO₄ by either carbon or proton implantation. The waveguides are characterised using the dark mode method and by spectroscopic studies, indicating that there is a reduction of the refractive index at the end of the ion track. Particularly, carbon implantation generates a considerable variation in the guiding region. It is shown that the waveguiding structure preserves the spectroscopic properties of the Nd³⁺ ions, thus maintaining the crystal quality.     

Double optical waveguide in Cu-doped KNSBN crystal formed by MeV boron ion implantation

We reported for what is to be believed the first time a double optical waveguide in a Cu-doped potassium sodium strontium barium niobate (KNSBN) crystal formed by double boron ion implantation. The energy and dose of B⁺ and B³⁺ ions were (3+6) MeV and (2+2)×10¹⁴ ions/cm², respectively. The refractive index profile of the waveguide showed a double-barrier confined shape, which suggested the formation of a two-layer waveguide structure. The two waveguide layers were with thickness of 2.6 and 2 μm, respectively, which was in a good agreement with the parameters obtained from transport and range of ions in matter 98 (TRIM) code simulation. The nuclear energy loss distribution of the MeV B ions implanted into this crystal had a similar shape to that of the waveguide index profile, which means an inherent relationship between the waveguide formation and the energetic energy deposition.     

Nd：Mg：LiNbO3单晶光学特性的初步研究

本文对Nd:Mg:LiNbO_3单晶的透射光谱、光学均匀性、抗光折变特性、倍频与自倍频特性进行了初步研究.报道了染料激光泵浦的Nd:Mg:LiNbO_3自信频激光实验,实现了非临界位相匹配下的自倍频运转,获得了波长为542.2nm的二次谐波输出.     

掺镁铌酸锂质子交换光波导光学性能的研究

本文用质子交换反应在5mol％MgO:LiNbO_3晶体中引起了e光折射率的增加,晶体中MgO的存在并不影响LiNbO_3质子交换光波导阶跃型折射率分布的特点。用常规的质子交换法制备的MgO:LiNb·O_3波导存在着损耗大和有效折射率不稳定的缺点,经过退火处理后,这些缺点可明显地得到改善。     

Optical planar waveguides in yb3＋-doped phosphate glasses produced by He＋ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

Second harmonic generation in periodically poled LiNbO3 waveguides formed by oxygen‐ion implantation

Planar and channel waveguides were fabricatied in periodically poled lithium niobate crystals by 6 MeV O‐ion implantation. Single‐pass second harmonic generation was carried out. A conversion efficiency of 34.5%/(W · cm²) was achieved in the channel waveguide, and 1.11 mW second harmonic light at 492.5 nm was generated. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

温度梯度法生长Nd:YAG激光晶体的核心分布

用温度梯度法生长了直径为75 mm大尺寸的Nd∶YAG激光晶体，通过退火排除了生长过程中进入晶体的碳原子. 用正交偏光显微镜观察了晶体的核心分布以及生长条纹. 测试了室温下的吸收谱并利用吸收谱研究了Nd离子在YAG晶体中的分布. 比较了温度梯度法与提拉法生长晶体的区别. 关键词： 材料 缺陷 温度梯度法 Nd∶YAG     

Nd:YSAG单晶的光谱和激光性能

用提拉法生长了(1.5 at.%)Nd~(3+):Y_3Sc_2Al_3O_(12)(YSAG)激光晶体,摇摆曲线表明晶体结晶质量优良.测量了该晶体的吸收和发光光谱,表明其适合成熟的808 nm激光二极管(LD)抽运,其~4F_(3/2)→~4I_(11/2)跃迁最强发射波长为1059 nm,发射截面为1.03×10~(-19)cm~2,同时其激光上能级寿命为253μs,表明Nd:YSAG具有和Nd:YAG相近的效率,但其激光上能级寿命比Nd:YAG长约20μs.以LD抽运2 mm×2 mm×6 mm Nd:YSAG激光棒,激光阈值为0.85 W,最高输出功率为1.1 W,激光斜效率为21.1%,光-光转化效率为18.3%.综合表明Nd:YSAG单晶作为激光性能优良的全固态激光材料,更适合全固态调Q激光输出.     

Optical planar waveguides in Yb³⁺-doped phosphate glasses produced by He⁺ ion implantation

Optical planar waveguides in Yb 3+-doped phosphate glasses are fabricated by implanting triple-energy helium ions. The guiding modes and the near-field intensity distribution are measured by using the prism-coupling method and the end-face coupling setup with a He-Ne laser at 633 nm The intensity calculation method (ICM) is used to reconstruct the refractive index profile of the waveguide. The absorption and the fluorescence investigations reveal that the glass bulk features are well preserved in the active volumes of the waveguides, suggesting the fabricated structures for possible applications as waveguide lasers.     

Nd^3＋：YAlO3晶体折射率温度系数的表示式

建立了Nd~(3+):YAlO_3(Nd:YAP)晶体折射率温度系数的表示式,该式得到的结果与测量值间具有较好的一致性。利用这个式子可以计算0.5398μm～1.0795μm波长范围311K～455K温度范围内Nd:YAP晶体的折射率温度系数。     

Properties of a 1 × 4 optical power splitter made of photonic crystal waveguides

Optical power splitters made of photonic crystal waveguides are believed to become essential components for compact photonic integrated circuits used in fiber optic networks. We design a 1 × 4 optical power splitter made of linear-defect waveguides in photonic crystals, and analyze its properties using the finite-difference time-domain method. Our simulation results show that the transmission properties vary with wave frequency and branch geometry, and that an incident wave is divided equally into four output ports. To reduce the reflections at the three branching regions in the 1 × 4 splitter, we place the defects of extra rods in the branching region, and achieve high transmission in each output waveguide.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

The study of damage and optical properties in LiNbO3 implanted by MeV Er and He ions

Abstract

Two LiNbO₃ (X and Y cut) crystals from different companies were implanted by 3.0 MeV Er ions to a dose of 7.5 × 10¹⁴ ions/cm² and 3.5 × 10¹⁴ ions/cm² with different beam current densities, respectively. After annealing at 1060°C in air for 2 hours, one LiNbO₃ sample was implanted by 1.5 MeV He ions to a dose of 1.5 × 10¹⁶ ions/cm². The Rutherford backscattering/channeling and prism coupling method have been used to study the damage and optical properties in implanted LiNbO₃. The results show: (1) the damage in LiNbO₃ created by 3.0 MeV Er ions depends strongly on the beam current density; (2) after annealing at 1060°C in air for 2 hours, a good Er doped LiNbO₃ crystal was obtained; (3) there is waveguide formation possible in this Er-doped annealed LiNbO₃ after 1.5 MeV He ion implantation. It is suggested that annealing is needed to remove the damage created by MeV Er ions before the MeV He ion implantation takes place, to realize the waveguide laser for Er doped LiNbO₃.     

Laser properties of different Nd-doped concentration Nd:YVO4 laser crystals

The laser outputs of 1.26, 0.95, 0.5 and 0.32 at% Nd-doped concentrations in Nd:YVO₄ crystal samples were performed under high pumping power of laser diode. The reason of different Nd-doped concentrations in Nd:YVO₄ crystals influencing on the laser output properties was explained. The intracavity double frequency laser outputs of Nd:YVO₄ crystal at 532 and 671 nm were also performed. Our experimental results show that the optimum Nd-doped concentration in Nd:YVO₄ crystal is about 0.5 at% under a pumping power of 30 W.     

一种实现光子晶体波导定向耦合型多路光均分的新方法

将多光子晶体单模波导平行、邻近放置构成定向耦合器. 依据自映像原理,数值分析了输入光场对称入射时,该系统中光的传播行为. 基于此结构,以三、四通道为例,设计了超微多路光分束器,并仅通过对称地改变耦合区中两个介质柱的有效折射率,使光场在横向发生重新分布,实现了输出能量的均分或自由分配. 和已报道结果相比,此调制方法更为简单易行而且效率更高,并可以推广到具有更多输出通道的光分束器中,在未来的集成光回路中具有广泛的应用价值. 关键词： 光子晶体波导 定向耦合器 分束器 能量均分     

Nano hillock and complex crater formation by low-energy proton implantation with incident angle into lithium niobate single crystal

The formation of nano-size hillocks and simple and complex craters was observed as a result of ion–surface collisions with a lithium niobate single crystal on proton implantation. The low-energy ion implantation process is considered as a controllable and versatile tool for surface and near-surface modifications down to an atomic scale as an alternative to the swift heavy ion irradiation effect. Lithium niobate samples implanted by proton ions with a low energy of 120 keV at various fluences (10¹⁵ and 10¹⁶ protons/cm²) were studied using atomic force microscopy (AFM). The images of surface modification appear as simple and complex crater formation in the case of incident ions at normal to the surface. Varying the angle of incidence to θ=30° with respect to the normal to the surface, hillocks and multi-hillocks were observed. The complex craters with central uplifted, cone-shaped hillocks with a height of up to 4.3 nm are surrounded by low-height (1 nm) rims. The hillock height varies from a few nanometers to 16 nm with the basal diameter from 200 to 340 nm depending on the ion implantation conditions. The complex crater and hillock formation on the lithium niobate sample surface at the collision spot with the impact of incident angle is discussed.     

Nd:YAG晶体板条低透射波前误差加工技术

针对高平均功率固体激光器对Nd:YAG晶体板条的技术需求,进行了Nd:YAG晶体板条低透射波前误差加工技术研究。详细分析了光学加工过程中引起板条端面透射波前畸变的误差来源,并提出工艺技术解决方案。实验结果表明,在板条抛光阶段通过采用合成盘硬抛光工艺以及新的工件装夹技术,能够解决传统板条加工工艺在面形及楔角精度方面可控性差的问题,更容易实现Nd:YAG晶体板条的低透射波前误差加工。对于150 mm30 mm2.5 mm规格的Nd:YAG晶体板条元件,端面透射波前畸变PV值达到0.74。