共查询到17条相似文献,搜索用时 171 毫秒
1.
2.
在石油石化行业中,储罐底板经常发生腐蚀而进行补板维修。对有补板的储罐底板的腐蚀情况进行准确评价是检测人员面临的迫切需要解决的问题。采用漏磁检测技术对储罐底板和补板进行研究分析,建立了补板缺陷漏磁场的有限元模型,得到了缺陷不同位置时漏磁场的空间分布特性。在实验室条件下进行缺陷不同位置的对比试验,试验结果与仿真分析一致。磁化结构在磁化被检件过程中,会先把补板磁化至近饱和状态,磁化程度和单板试验的磁化程度相差不大,但补板缺陷处产生的漏磁场会优先从未被磁化至饱和状态的原底板中穿过,致使缺陷量化结果小于实际值。 相似文献
3.
4.
5.
6.
7.
8.
9.
10.
11.
管道漏磁检测及其缺陷漏磁场的仿真技术研究具有十分重要的意义。在对各种漏磁场计算方法进行比较之后,选择了有限元法作为主要研究工具。叙述了漏磁检测的基本原理,介绍了漏磁管道检测装置的工作原理和基本结构,建立了管道漏磁检测中缺陷漏磁场计算的三维有限元模型,并以此为基础分别研究了缺陷漏磁信号特点、缺陷的几何尺寸与漏磁信号的关系、以及材料壁厚等对漏磁信号的影响等问题。通过对多磁化单元结构进行有限元模拟和试验仿真,发现多个磁化单元会造成磁场的叠加,磁化单元数量的增加会使缺陷处漏磁场增强,并且中间磁化单位的增加量要大于两侧。缺陷的几何尺寸影响漏磁场的分布,在一定缺陷直径范围内,缺陷深度与漏磁场信号强度呈近似线性关系。无论被测管道壁厚如何变化,相同几何参数的缺陷漏磁场轴向分量变化趋势仍然相同。适当选取提离值,将有助于获得良好的漏磁场信号。 相似文献
12.
为了提高管道漏磁内检测缺陷量化技术的精度,基于三轴漏磁内检测器采集到的缺陷漏磁数据,设计了一系列针对管道轴向、径向以及周向的特征提取方法,为后续进行缺陷的高精度量化提供了数据基础。针对缺陷不同尺寸量化任务下特征冗余的问题,基于近邻成分分析提出一种特征选择方法,该方法能够有效地剔除原始特征集中的无关特征。在基于支持向量回归的漏磁缺陷尺寸量化中,结合改进蝙蝠算法对支持向量回归的参数进行寻优,结果表明,所设计的量化方法能够有效降低时间复杂度,在一定程度上提高缺陷量化的准确性。 相似文献
13.
14.
15.
16.
Metal loss defects in a buried pipeline are detected by magnetic flux leakage technique. Characterisation of the defects and sentencing according to the severity is extremely important for organised maintenance of pipelines. In this paper we identify the parameters that characterise a defect and the features of magnetic flux leakage signal (MFL) that are affected by those parameters. We show that analysis of the MFL signal using wavelet transform scores over any other method of its kind and exposes the incompleteness of the other analysis techniques that have appeared in the literature, to date. A number of experiments were performed on a rotating drum test rig having defects of different shapes and sizes. The results from these experiments are presented and discussed in detail. Wavelet transform decomposition and reconstruction techniques were applied for denoising the raw data. We test the efficacy of discrete wavelet transform for denoising MFL signal and present a complete scheme of characterisation of defects from denoised MFL signal. We discuss the issue of defect classification and suggest that characterisation to specified accuracy, amounts to designing a classifier that assigns a defect into known classes whose shapes and sizes are defined a priory. 相似文献