UV-detection capillary electrophoresis for benzo[a]pyrene and pyrene following a two-step concentration system using homogeneous liquid-liquid extraction and a sweeping method

10(-9) mol l-1 levels of polycyclic aromatic hydrocarbons (PAHs) suspected for certain noxious materials can be determined and separated by UV-detection capillary electrophoresis following a two-step concentration system. When the conditions of the homogeneous liquid-liquid extraction were [THF]T = 5 vol%, [HCl]T = 0.66 mol l-1, and [PFOA]T = 2 x 10(-3) mol l-1 (i.e., the volume of sample solution; 50 ml-->sedimented phase; 30 microliters), the extraction percentages of benzo[a]pyrene (Bap) and pyrene (Py) at 10(-6) mol l-1 were 102 and 97.5%, respectively. Also, when the total concentration factor(volume ratio), which includes that of the sweeping method, was 8335-fold, the determination range of Bap was 6.4 x 10(-9)-8.0 x 10(-7) mol l-1 and for Py, 8.0 x 10(-9)-7.0 x 10(-7) mol l-1. The detection limits (3 sigma) of Bap and Py were 1.6 x 10(-9) and 4.8 x 10(-9) mol l-1, respectively.     

芳香胺类化合物的微孔膜液液萃取-毛细管电泳分析

芳香胺由于其广泛的应用如工业生产中合成染料、杀虫剂、橡胶、塑料、粘合剂、药物的中间体或工业及发动机润滑油中的抗氧化添加剂已成为众所周知的环境污染物[1～3].其中有些芳香胺毒性很强,有些则是潜在的致癌物质[4～6].比如:4-氨基联苯和2-萘胺就是所熟知的致癌物[5,7,8].另外在环境中它们也可能通过一系列反应转化为毒性比较强的亚硝基化合物[9],进而通过各种可能的途径进人环境中,因此,它们通过直接接触或间接污染人们的生活环境从而对人类的健康构成了严重的威胁.基于此,建立简单、快速、灵敏及环境友好的环境水样品的芳香胺分析方法是非常必要的.     

Analysis of amphetamines in urine with liquid-liquid extraction by capillary electrophoresis with simultaneous electrochemical and electrochemiluminescence detection

Amphetamines including methamphetamine, 3,4-methylenedioxyamphetamine and 3,4-methylenedioxymethamphetamine were separated and detected by CE using simultaneous electrochemical (EC) and electrochemiluminescence (ECL) detection (CE-EC/ECL). Factors that influenced the separation and detection performance, such as the detection potential, the pH value and concentration of the running buffer, the separation voltage and the pH of the detection buffer, were investigated. LODs of 3.3x10(-8) mol/L (0.16 fmol), 1.6x10(-7) mol/L (0.78 fmol) and 3.3x10(-8) mol/L (0.16 fmol) were obtained for methamphetamine, 3,4-methylenedioxyamphetamine and 3,4-methylenedioxymethamphetamine, respectively. For practical application, a liquid-liquid extraction with ethyl acetate procedure was developed for urine sample pretreatment and extraction efficiencies higher than 90% were obtained. The established simultaneous CE-EC/ECL was successfully applied for urine sample analysis.     

Determination of tryptophan and kynurenine in brain microdialysis samples by capillary electrophoresis with electrochemical detection

Capillary electrophoresis with electrochemical detection (CEEC) is evaluated for the determination of tryptophan and kynurenine in microdialysis samples obtained from rat brain. These compounds were separated from all other electroactive metabolites of tryptophan. Limits of detection for both compounds were in the low attomole range. The response was linear for kynurenine between 4.9 and 980 fmol injected with a correlation coefficient of 0.9992 (n = 12). The system was evaluated for monitoring tryptophan and kynurenine in the extracellular fluid of the rat brain following systemic administration of tryptophan.     

Determination of urinary catecholamines with capillary electrophoresis after solid-phase extraction

The stabilities of 3,4-dihydroxybenzylamine (DHBA), dopamine, 3-methoxytyramine, normetanephrine and metanephrine standards under acid, base and enzymatic hydrolysis conditions were studied. Basic incubation media were not suitable for 3,4-dihydroxy compounds, but acid and enzymatic hydrolysis conditions were applicable to all the compounds. The results of acid and enzymatic hydrolysis were comparable and the enzymatic hydrolysis was applied to a urine matrix. A method including solid-phase extraction (SPE) with a copolymer sorbent was developed for purification of the urine samples. Due to poor recovery of DHBA, the most frequently used internal standard in catecholamine analysis, this compound was replaced with the 3-O-methoxy structure. The recoveries of the compounds in spiked urine samples in SPE were between 96.4 and 124.4%. The repeatability of the combination of enzymatic hydrolysis and SPE pretreatment was good for all the compounds, except for dopamine and 3-methoxytyramine due to some matrix compounds still interfering with the separation. The analyses were performed with capillary electrophoresis in an ammonium acetate buffer with UV detection. The validation data for the compounds including limit of detection, limit of quantification, linearity and repeatability of the method are presented.     

On-line sample preconcentration by sweeping with dodecyltrimethylammonium bromide in capillary zone electrophoresis

On-line sample preconcentration of oligonucleotides with a new sweeping carrier was developed by using dodecyltrimethylammonium bromide (DTAB) below the critical micelle concentration (CMC). The sweeping results with DTAB below and above the CMC were compared. The use of DTAB below the CMC benefits the preconcentration of the oligonucleotides, while the use of DTAB above the CMC is good for hydrophobic small molecules. The factors affecting the sweeping results were optimized and this method was evaluated by constructing calibration curves for thrombin aptamers. The sweeping scheme produced a 112-fold sensitivity enhancement for the oligonucleotides relative to that run in a running buffer without DTAB. The sweeping method developed here can be a good reinforcement of the preconcentration scheme by sweeping when less-hydrophobic analytes or large negatively-charged molecules need to be preconcentrated.     

Determination of mercury(II) in water samples using dispersive liquid-liquid microextraction and back extraction along with capillary zone electrophoresis

We have developed a method for the determination of mercury in water samples that combines dispersive liquid-liquid microextraction (DLLME) with back-extraction (BE) and detection by capillary zone electrophoresis. DLLME is found to be a simple, cost-effective and rapid method for extraction and preconcentration. The BE procedure is based on the fact that the stability constant of the hydrophilic chelate of Hg(II) with L-cysteine is much larger than that of the respective complex with 1-(2-pyridylazo)-2-naphthol. Factors affecting complex formation and extraction efficiency (such as pH value, concentration of the chelating agent, time of ultrasonication and extraction, and type and quantity of disperser solvent) were optimized. Under the optimal conditions, the enrichment factor is 625, and the limit of detection is 0.62???g?L^?1. The calibration plot is linear in the range between 1 and 1,000???g?L^?1 (R ²?=?0.9991), and the relative standard deviation (RSD, for n?=?6) is 4.1%. Recoveries were determined with tap water and seawater spiked at levels of 10 and 100???g?L^?1, respectively, and ranged from 86.6% to 95.1%, with corresponding RSDs of 3.95?C5.90%.

Determination of melamine residue in liquid milk by capillary electrophoresis with solid-phase extraction

A novel solid-phase extraction-capillary electrophoresis (SPE-CE) method was developed for the determination of melamine residue in liquid milk. The conditions of SPE and CE were investigated and optimized. A 1% trichloroacetic acid plus 2.2% lead acetate solution were used for the extraction of analyte and the removal of protein. A Cleanert PCX SPE cartridges column was used for clean up. The 50 mM sodium dihydrogenphosphate running buffer (pH adjusted to 3.2 with citric acid) was used as a running buffer. The linearity is satisfactory in the range of 0.8-100 μg/mL with a correlation coefficient of 0.9998. Under the optimal conditions, the method limit of detection (LOD) and method limit of quantification were 0.12 mg/kg and 0.37 mg/kg, respectively. The recovery of melamine from different liquid milk samples was in the range of 89.5-98.5% with a relative standard deviation of 1.8-3.5%. The intra- and inter-day assay precision was 2.8% (n = 6) and 4.1% for five days, respectively. The developed method has been applied successfully for the determination of melamine residue in liquid milk samples. The results obtained by the proposed method agree with those obtained by high-performance liquid chromatographic method. The proposed method enables the quantitative determination of melamine residues at levels as low as 0.37 mg/kg in different liquid milk.     

胶束扫集毛细管电泳快速测定止咳露中的麻黄碱和可待因

采用胶束扫集毛细管电泳, 建立了快速测定止咳露中麻黄碱和可待因含量的方法, 并通过日间实验、柱间实验等对方法的稳定性进行了考察研究.胶束扫集电动色谱缓冲体系含60 mmol/L 十二烷基磺酸钠, 10 mmol/L NaH2PO4 (pH 2.20), 18%乙腈(V/V), 分离电压-14 kV, 测量波长200 nm. 讨论了pH、 SDS浓度、样品溶剂等对分离效果的影响. 在优化条件下, 麻黄碱和可待因均在5 min内出峰, 方法检出限(μg/mL)、线性范围(μg/mL)、相关系数分别为: 麻黄碱 0.433、 1.73～27.7、 0.9997, 可待因0.833、 3.33～50.3、 0.9996, 回收率在96.7%～103.5%之间. 峰面积日内RSD≤4.2% (n=5), 日间RSD≤8.0% (n=5), 柱间实验RSD≤2.3% (n=3).     

Determination of cyclodextrins and their derivatives by capillary electrophoresis with indirect UV and conductivity detection

A fast and simple capillary electrophoretic method suitable for the determination of native alpha-, beta-, gamma-cyclodextrins, their randomly substituted tert-butyl derivatives (average degree of substitution 3.8-4.4), heptakis (2,6-di-O-methyl)- and heptakis (2,3,6-tri-O-methyl)-beta-cyclodextrin was developed. Naphthyl-2-sulfonic acid (2-NSA), 3-iodobenzoic acid (3-IBA) and (1S)-1-phenylethylamine (PHEA) were tested as selective complex forming and UV absorbing background electrolyte additives. The composition of optimized background electrolyte for the separation of uncharged cyclodextrins and their derivatives was: 15 mM 3-iodobenzoic acid titrated with tris[hydroxymethyl]aminomethane to pH 8.0, 5% (v/v) of acetonitrile. A complete resolution of mono-2-O-, mono-3-O- and mono-6-O-carboxymethyl-beta-cyclodextrin regioisomers was achieved in the optimized background electrolyte system: 40 mM PHEA titrated with 2-[N-morpholino]ethanesulfonic acid to pH 5.6. In addition to indirect UV detection a contactless conductometric detector was successfully utilized.     

Determination of cyclodextrins and their derivatives by capillary electrophoresis with indirect UV and conductivity detection

A fast and simple capillary electrophoretic method suitable for the determination of native α-, β-, γ-cyclodextrins, their randomly substituted tert-butyl derivatives (average degree of substitution 3.8 – 4.4), heptakis (2,6-di-O-methyl)- and heptakis (2,3,6-tri-O-methyl)-β-cyclodextrin was developed. Naphthyl-2-sulfonic acid (2-NSA), 3-iodobenzoic acid (3-IBA) and (1S)-1-phenylethylamine (PHEA) were tested as selective complex forming and UV absorbing background electrolyte additives. The composition of optimized background electrolyte for the separation of uncharged cyclodextrins and their derivatives was: 15 mM 3-iodobenzoic acid titrated with tris[hydroxymethyl]aminomethane to pH 8.0, 5% (v/v) of acetonitrile. A complete resolution of mono-2-O-, mono-3-O- and mono-6-O-carboxymethyl-β-cyclodextrin regioisomers was achieved in the optimized background electrolyte system: 40 mM PHEA titrated with 2-[N-morpholino]ethanesulfonic acid to pH 5.6. In addition to indirect UV detection a contactless conductometric detector was successfully utilized.     

Determination of zinc in water samples by flame atomic absorption spectrometry after homogeneous liquid-liquid extraction

In this study, a new and simple homogeneous liquid-liquid extraction (HLLE) method based on a pH-independent phase-separation process was developed using a ternary solvent system [water-tetrabutylammonium ion (TBA ⁺)-chloroform] for the preconcentration of Zn²⁺ ions. A Schiff’s base ligand was used as the chelating agent prior to Zn²⁺ ions extraction. Flame atomic absorption spectrophotometry using acetylene-air flame was used for the quantification of analyte after preconcentration. The phase separation occurred due to ion-pair formation of TBA and perchlorate ion. The sedimented phase was then separated using a 100 μL micro-syringe and diluted to 1.0 mL with ethanol. The sample was introduced into the flame by conventional aspiration. After the optimization of complexation and extraction conditions such as pH 9.0, [ligand] = 1.0 × 10⁻⁵ M, [TBA⁺] = 2.0 × 10⁻² M, 100.0 μL of [CHCl₃] and [CLO₄⁻] = 2.0 × 10⁻² M, a preconcentration factor of 100 was achieved for only 10 mL of the sample. The relative standard deviation was 2.3% (n = 10). The limit of detection was sufficiently low and at ppb level. The proposed method was applied to the extraction and determination of Zn²⁺ in natural water samples with satisfactory results.     

Determination of thermodynamic pKa values of benzimidazole and benzimidazole derivatives by capillary electrophoresis

Thermodynamic pK_a values for benzimidazole and several substituted benzimidazoles were determined by CE. Electrophoretic mobilities of benzimidazoles were determined by CE at different pH levels and ionic strengths. The dependence of electrophoretic mobilities on pH was used to obtain pK_a values at different ionic strengths. Extrapolations to zero ionic strength were used to determine the thermodynamic pK_a values. Using this method the thermodynamic pK_a values of 15 benzimidazoles were determined and found to range from 4.48 to 7.38. Results from the CE measurements were compared with spectrophotometric measurements which were evaluated at wavelengths where the highest absorbance difference for varying pH was recorded. The two analytical techniques were in good agreement.     

Determination of pyridine and adenine nucleotide metabolites in Bacillus subtilis cell extract by sweeping borate complexation capillary electrophoresis

With a growing interest in new areas of bioanalytical research such as metabolome analysis, the development of sensitive capillary electrophoresis (CE) methods to analyze sub-microM concentrations of analytes in biological samples is required. In this report, the application of CE with sweeping by borate complexation is used to analyze a group of seven pyridine and adenine nucleotide metabolites derived from bacteria Bacillus subtilis cell extracts. Nanomolar (nM) detectability of analytes by CE with UV photometric detection is achieved through effective focusing of large sample plug (approximately 10% of capillary length) using sweeping by borate complexation method, reflected by a limit of detections (S/N = 3) of about 2 x 10(-8) M. Changes in metabolites concentrations were observed in cell extracts when using either glucose or malate as the carbon source in the culture medium. Concentration of pyridine and adenine nucleotides in cell extracts varied widely from 78.6 (+/-7.6) microM for nicotinamide-adenine dinucleotide in malate to 0.66 (+/-0.12) microM for nicotinamide-adenine dinucleotide phosphate in glucose culture medium. Concentrations of metabolites in a single cell were also estimated at millimolar (mM) level. The method was validated in terms of linearity, sensitivity and reproducibility. The application of CE by sweeping borate complexation allows for sensitive and reproducible analyses of nucleotide metabolites in complex biological samples such as bacteria cell extracts.     

Determination of tobacco-specific N-nitrosamines in rabbit serum by capillary zone electrophoresis and capillary electrophoresis-electrospray ionization-mass spectrometry with solid-phase extraction

In this paper, we propose a new strategy for separation and determination of tobacco-specific N-nitrosamines (TSNAs), a group of strong carcinogens found only in tobacco products, by using CZE and CE-MS associated with SPE. Six TSNAs: N'-nitrosonornicotine, N'-nitrosoanatabine, N'-nitrosoanabasine, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol, and 4-(methylnitrosamino)-4-(3-pyridyl)-1-butanol were simultaneously separated by either of two CZE methods, one of which worked with ammonium formate buffer (pH 2.5) and another with citrate buffer (pH 2.4), as well as a CE-MS method. The CZE conditions including pH and concentration of running buffer, capillary length, applied voltage, and capillary temperature were systematically optimized. For CE-MS method, an optimized sheath liquid consisted of methanol-water was used at a flow rate of 10 muL/min. With SPE procedure, our proposed CE-MS method was successfully applied to determine TSNAs after 15 min metabolism in rabbits. A comparison study between CZE and CE-MS methods for quantitative purposes was carried out, showing that both methods provided similar separation efficiency, selectivity, repeatability, linearity, and recovery. However, CE-MS method was better suited for the analysis of TSNAs in complicated biological samples for its sensitivity and extra information on molecular structure. Having good accordance with our previous work by using LC-MS, the new CE-MS method is expected to be an alternative to the LC-MS method and applied to study the metabolism of TSNAs.     

Analysis of pyrimidine derivatives by capillary electrophoresis

Summary A capillary electrophoretic method has been developed for the determination of the main product as well as of by-products in technical samples of substituted pyrimidines. Both zone electrophoresis and micellar electrokinetic chromatography have been used for the separation employing electrolytes consisting of borate buffers (pH 9 to 9.4) with or without sodium dodecylsulfate. Optimization of separation selectivity could be achieved by addition of up to 20% 2-propanol or methanol to the carrier electrolyte. Quantification by internal standards resulted in relative standard deviations between 0.2 and 0.8%. By-products could be analyzed down to levels of 0.1% in technical samples.

---

Analyse von Pyrimidinderivaten mitteles Kapillarelektrophorese

Zusammenfassung Für die Bestimmung von Haupt- und Nebensubstanzen in technischen Proben von substituierten Pyrimidinen wurde ein kapillarelektrophoretisches Analysenverfahren entwickelt. Sowohl Zonenelektrophorese als auch mizellare elektrokinetische Chromatographie mit Trägerelektrolyten bestehend aus Boratpuffern (pH 9 bis 9.4) mit oder ohne Natriumdodecylsulfat wurden für die Trennung eingesetzt. Eine Optimierung der Trennselektivität war durch die Zugabe von bis zu 20% 2-Propanol oder Methanol zum Trägerelektrolyten möglich. Quantifizierung mittels interner Standards ergab relative Standardabweichungen zwischen 0.2 und 0.8%. Nebenprodukte konnten in technischen Proben bis zu Gehalten von 0.1% analysiert werden.

     

Determination of surfactants by capillary electrophoresis

Capillary electrophoresis has been increasingly used during the past few years for the separation and determination of surfactants. These substances are applied in many household and industrial products such as laundry detergents, cosmetics and pharmaceuticals, often as homologous and isomeric mixtures. Product development and control as well as toxicological and environmental analyses require selective and sensitive analytical methods. This review presents capillary electrophoretic techniques to determine important representatives of cationic, anionic, and neutral surfactants. The application of different buffer additives such as organic solvents, cyclodextrins or micelles to enhance the resolution of complex mixtures is discussed. Besides direct and indirect UV and fluorescence detection, examples for conductivity and mass spectrometric detection are also given. Derivatization procedures to improve the detectability and implement charge in neutral analytes are described. The successful use of capillary electrophoresis for surfactant determinations has proven that it can serve as a routine technique in many real-world applications. Robust, validated methods for the quantitation of single compounds, such as alkylbenzene sulfonates, sodium dodecyl sulfate and benzalkonium salts, are now available. Characteristic peak patterns (fingerprint analysis) can be used for the identification of surfactants in multicomponent formulations (e.g. ethoxylates and phosphonates).     

Determination of polyhexamethyleneguanidine by capillary electrophoresis

The electrophoretic behavior of polyhexamethyleneguanidine hydrochloride (PHMG HC), hexamethylenediamine (HMDA), and guanidine hydrochloride (GHC) was studied. It was shown that PHMG HC and the initial toxic components of its synthesis, GMDA and GHC, can be separated. A procedure was developed for determining PHMG HC oligomers, GMDA, and GHC in aqueous solutions in concentrations from 0.007 to 0.05 mg/mL by capillary electrophoresis. The procedure was applied to the analysis of model mixtures of these compounds.     

Chemometric method to optimize chiral separation of imidazole derivatives by capillary electrophoresis

A chemometric methodology was proposed to optimize the migration time, height equivalent to a theoretical plate and separation of a mixture of a series of imidazole compounds by capillary electrophoresis. The optimization process was based on a special polynomial from 9 or 18 preliminary experiments. This method connects a general simplex method to a computer. A simplex two or three optimization-capillary electrophoresis (STO-CE) method has been developed in our laboratory. The most efficient separation was achieved with acetonitrile-phosphate buffer, pH 4.70, (5.30+94.70 (v/v)) with a beta-cyclodextrin concentration in the background electrolyte equal to 5.80 mM and a capillary temperature of 35 degrees C. Similar results were obtained using simple step-wise scanning. The higher relative difference obtained for these values with these two methods (simplex and step-wise scanning) was 5% for the beta-cyclodextrin concentration factor.