银纳米粒子簇的设计、 制备和表面增强拉曼光谱

通过匹配激光光斑直径与胶体微球的尺寸, 设计制备了银纳米粒子的表面增强拉曼散射(SERS)基底, 并将其用于研究单个银纳米粒子簇的表面增强拉曼光谱. 在制备纳米粒子的过程中, 考察了等离子体刻蚀时间与银沉积厚度对“单”银纳米粒子结构与形貌的影响. 将吡啶、 巯基苯和罗丹明R6G作为SERS探针分子, 研究了其SERS效应, 通过荧光共振能量转移(FRET)机理, 实现了染料分子在单银纳米粒子簇上的SERS效应. SERS光谱测试与相关计算结果表明, 单个银纳米粒子簇的拉曼增强因子能够达到约10⁶.     

磁性Fe_2O_3/Au/Ag复合纳米粒子的制备及其富集作用研究

利用种子生长法制备了磁性Fe2O3/Au/Ag复合纳米粒子,采用UV-vis和SEM对其光学性质以及表面结构的变化进行了表征.通过调节硝酸银的用量,制备了一系列具有不同Ag壳层厚度和表面结构的双金属外壳纳米粒子.以苯硫酚(TP)为探针分子,研究了不同Ag壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性.结果表明其SERS活性与表面结构的改变有关,在同时出现Ag和Au光学性质的Fe2O3/Au/Ag复合纳米粒子表面可观察到最强的SERS效应,这与表面的针孔效应以及Ag和Au之间的耦合增强作用有关.考察了Fe2O3/Au/Ag复合纳米粒子的磁富集作用,并利用SERS原位监测磁富集溶液中低浓度TP的能力,研究结果表明通过磁富集可提高SERS检测限,并且Fe2O3/Au/Ag的磁富集能力较Fe2O3/Au弱,但前者SERS信号较强.     

银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对四-(4-N-甲基吡啶)卟啉(H2TMPyP)及其银配合物(AgTMPyP)在Ag胶中的表面增强拉曼散射(SERS)谱的影响.SERS光谱表明,吸附于Ag胶粒的H2TMPyP与衬底银原子结合形成AgTMPyP,加入CTAB后,部分AgTMPyP表面络合物还原为H2TMPyP.相似的去金属化反应也出现在AgTMPyP/Ag胶/CTAB体系中.CTAB的加入使SERS谱带强度明显增加.AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变.     

表面增强拉曼散射光谱研究聚苯胺纳米棒的构象转变

采用电化学沉积法制备了聚苯胺(Polyaniline,PANI)纳米棒、树枝状银和纳米颗粒银基体。并利用表面增强拉曼散射光谱技术(Surface-enhanced Raman Scattering,SERS)研究了PANI纳米棒的分子链在Ag金属表面的构象变化。实验结果表明由于Ag金属表面的等离子共振效应,PANI分子中N原子的孤对电子与Ag的自由电子产生共轭效应,使得PANI分子链上的电荷重新分布,结果 C—H面内弯曲振动频率和C—C键的伸缩频率向低波数方向移动(蓝移);拉曼散射频率增强的基团在金属表面倾向垂直于分子链的主轴,拉曼散射频率减弱的基团在金属表面倾向平行于分子链主轴。     

Au-Ag三角纳米环单层膜的原位转化制备及 SERS效应

利用模板牺牲氧化还原反应将自组装在基片上的三角板银纳米粒子(边长约为79.2 nm)与氯金酸溶液作用进而原位转化形成三角纳米环. 通过紫外-可见(UV-Vis)光谱实时监测基片上银三角板纳米粒子在反应不同阶段的消光特性; 扫描电子显微镜(SEM)显示了银三角板纳米粒子转化过程的形貌变化; 利用X射线光电子能谱(XPS)对其成分进行分析. 表征结果表明, 三角纳米环的成分为Au-Ag合金或复合物; 随着基片与氯金酸溶液作用时间的增加, 自组装膜的表面等离子体共振峰逐渐红移; Au-Ag三角环状纳米粒子的平均壁厚度从29.3 nm缩小至16.2 nm. 以4-巯基苯胺(4-ATP)为探针分子研究了该Au-Ag三角环状纳米粒子单层膜的表面增强拉曼(SERS)活性. 自组装单层膜基底的SERS信号随着Au-Ag三角纳米环平均壁厚度的增加逐渐增强.     

基于MOF@TiN-Ag/银溶胶复合基底的茶碱表面增强拉曼检测

以制备的MOF@TiN-Ag/银溶胶复合基底为表面增强拉曼光谱(SERS)活性基底，对茶碱进行SERS检测，探讨了基于该复合基底的表面增强拉曼技术在药物检测方面的应用。首先，利用电化学阳极氧化结合氨气还原氮化法制备了氮化钛纳米管阵列，随后通过电化学沉积法制备TiN-Ag复合基底，并在其表面原位生长金属有机框架(MOF)包覆层得到MOF@TiN-Ag复合基底，将茶碱与银溶胶混合后滴加在该复合基底上进行表面增强拉曼光谱检测。结果表明，MOF@TiN-Ag/银溶胶复合基底中存在面心立方晶型TiN、金属单质Ag和MOF钴基3种物相；扫描电镜结果显示，TiN纳米管排列整齐，Ag纳米结构呈树枝状均匀分散在其表面；作为隔绝层的MOF粒子形状规整，覆盖在TiN-Ag表面；银溶胶纳米粒子呈圆球状分布在MOF@TiN-Ag复合基底表面。由于银纳米粒子与TiN-Ag复合基底可发生协同增强作用，加之MOF的富集特性，使得该复合基底具有优异的SERS性能，其对茶碱溶液的SERS检出限为1×10^-5 mol/L，检测性能良好。所制备的MOF@TiNAg/银溶胶复合基底拓宽了SERS在药物检测...     

银纳米微球和银纳米棒自组装膜的制备及SERS研究

采用硼氢化钠还原硝酸银,用振荡器在不同转速下振荡得到单分散的银纳米微球和银纳米棒,再将银纳米微球及银纳米棒自组装于被3-氨丙基-三甲氧基硅烷(APTMS)修饰的玻璃基片上,制得了具有表面增强拉曼(SERS)活性的基底,分别以罗丹明6G(R6G)和罗丹明B(RB)为探针分子对这两种基底进行SERS活性检测,结果发现这两种基底均为较理想的SERS衬底。     

维生素PP的表面增强拉曼散射光谱研究

报道了维生素PP分子的常规拉曼光谱(NRS)及该分子在活性衬底银胶上的表面增强拉曼散射(SERS),并对它的拉曼特征峰进行了初步的指认和归属.维生素PP的常规拉曼光谱和SERS谱的对比表明,该分子吸附在银表面时,它的C‖O键与银粒子发生电荷转移,碳氧双键打开形成C-O 单键.通过分析可以推断维生素PP通过羰基和氨基垂直或斜立吸附在银表面上.     

Polarized surface enhanced Raman and absorbance spectra of aligned silver nanorod arrays

Polarized surface-enhanced Raman scattering (SERS) and UV-vis absorbance spectra were measured for a nonplanar Ag nanorod array substrate prepared by oblique angle vapor deposition. The anisotropy of the SERS polarization was shown to differ from that of the polarized UV-vis absorbance. The maximum SERS intensity was observed in the polarization direction perpendicular to the long axis of the Ag nanorods, while the UV-vis absorbance was strongly polarized along the direction of the long axis of the nanorod array. Analysis of the polarization data showed that molecular orientation was not the cause of the anisotropic SERS scattering. Rather, the SERS anisotropy was primarily attributed to the lateral arrangement of the three-dimensional tilted nanorod lattice in which highly localized plasmon modes are created by strong electromagnetic coupling between adjacent metallic nanorods.     

Plasma-induced formation of Ag nanodots for ultra-high-enhancement surface-enhanced Raman scattering substrates

We report here plasma-induced formation of Ag nanostructures for surface-enhanced Raman scattering (SERS) applications. An array of uniform Ag patterned structures of 150 nm diameter was first fabricated on a silicon substrate with imprint lithography; then the substrate was further treated with an oxygen plasma to fracture the patterned structures into clusters of smaller, interconnected, closely packed Ag nanoparticles (20-60 nm) and redeposited Ag nanodots ( approximately 10 nm) between the clusters. The substrate thus formed had a uniform ultrahigh SERS enhancement factor (1010) over the entire substrate for 4-mercaptophenol molecules. By comparison, Au patterned structures fabricated with the same method did not undergo such a morphological change after the plasma treatment and showed no enhancement of Raman scattering.     

Gold surface plasmon crystal structure based‐on polystyrene template for biosensor application

In this communication, we assembled ordered polystyrene (PS) microsphere array as a template with the drop‐coating method, and the oxygen plasma was used to etch the template to adjust the spacing between the PS microspheres. Nano‐triangular gold array and silver nano‐pyramid array were obtained by ion beam sputtering to deposit precious metal gold and silver. We observed the surface morphology of Au and Au/Ag composite films by scanning electron microscope and characterized the films by X‐ray diffraction and ultraviolet/visible light spectrophotometer. The results show that the etching time of oxygen plasma has an obvious effect in adjusting the spacing between PSs and has a significant effect on the morphology of Au structure.     

An Auger Electron Spectroscopic Study of Ion and Plasma Etching of Thin Films Obtained by Plasma Activation of the Microdroplet Products of Thermal Degradation of Solid Polypropylene

The matrix properties of films obtained by plasma-enhanced deposition of the microdroplet products of thermal degradation of solid propylene (PEPP) were studied. The sample thickness was 120 nm, and the volume fraction of the dense phase was 10%. The rates of ion sputtering and the rates and some features of etching of the PEPP films at various plasma parameters were determined from the concentration profiles of the basic film-forming element (carbon) as obtained by Auger electron spectroscopy (AES) in combination with layer-by-layer sputtering by argon ions. It was shown that the films were highly uniform over the entire film depth down to the substrate. The oxygen concentration on the sample surface and over the film depth were determined after the plasma etching of the film in the residual air (the depth of penetration and formation of oxygen-containing groups did not exceed 30 nm). The alternation of interference colors on the PEPP surface observed in scattered light during the plasma etching was described. Comparison of the results obtained with the data for initial polypropylene made it possible to conclude that the matrix forming the basis of the PEPP coatings (90%) can be treated as a polymer-like structure.     

Ag-SiO2 core-shell nanorod arrays: morphological, optical, SERS, and wetting properties

Using the hydrolysis of tetraethylorthosilicate, a uniform and conformal layer of porous SiO(2) with controlled thickness has been coated onto the oblique angle deposited Ag nanorod (AgNR) array to form an aligned AgNR-SiO(2) core-shell array nanostructure. The morphology, optical property, SERS response, and surface wettability of the AgNRs with different SiO(2) shell thicknesses have been obtained by multiple characterization techniques. The morphological characterization shows that each AgNR on the array is coated with a uniform and porous silica shell independently and the growth of shell thickness follows a linear function versus the coating time. Thickening of the shell induces a monotonic decrease of the apparent contact angle, red-shift of the transverse mode of the localized surface plasmon resonance peak, and makes the SiO(2) shell more compact. The SERS response of 4-Mercaptophenol on these substrates exhibits an exponential decay behavior with the increasing coating time, which is ascribed to the decreasing Ag surface coverage of core-shell nanorods. Under the assumption that the Ag surface coverage is proportional to the SERS intensity, one can estimate the evolution of SiO(2) coverage on AgNRs. Such coverage evolution can be used to qualitatively explain the LSPR wavelength change and quantitatively interpret the contact angle change based on a double Cassie's law.     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

Non-Steady-State Combined Process of Etching and Imidization of Polyamidoacid Film in Nonequilibrium Oxygen Plasma

The non-steady-state process of etching of a polyamidoacid film in an nonequilibrium oxygen low-pressure inductively coupled radiofrequency-discharge plasma was studied. It was shown that an unsteady imidization process develops in the bulk of the film simultaneously with occurrence of an unsteady film etching process. The time dependence of film etching rate at varying film thickness and incident ion energy was determined. The mechanism of the unsteady etching–imidization process of the polyamidoacid film in an oxygen plasma and the role of oxygen atoms and molecules in the process are discussed.     

银纳米枝的合成及表面增强拉曼效应

利用硝酸银与铜之间发生置换反应原理, 在铜箔上得到了有序的银纳米枝结构, 用十二烷基磺酸钠(SDS)为表面活性剂, 通过调控前驱体硝酸银的浓度, 可在铜箔上得到不同密度的银纳米枝. 表面拉曼增强实验结果表明, 当分别以对巯基苯胺(4-ATP)、腺嘌呤和罗丹明G6为探针分子时, 有序的银纳米枝结构比无序的银纳米粒子具有更好的拉曼增强活性; 且随银纳米枝密度的增加, 表面拉曼增强活性有所提高. 该有序的银纳米枝结构是较好的表面增强拉曼(SERS)活性基底, 在有机分子和生物分子的SERS检测方面将具有一定的应用前景.