(5-氨基-[1,3,4]噻二唑-2-基)-丙酸乙酯的合成工艺改进

以丁二酸酐为起始原料,经醇解和酰化反应制得丁二酸单乙酯酰氯(3);3经甲烷磺酸催化与氨基硫脲环合合成了重要药物中间体——(5-氨基-[1,3,4]噻二唑-2-基)-丙酸乙酯,其结构经~1H NMR,IR和MS确证。运用正交试验对环合反应条件进行优化。最优反应条件为:3 132 mmol,n(氨基硫脲)∶n(3)∶n(甲烷磺酸)=1∶3∶3,于110℃反应3 h,总收率51.3%。     

3-硝基-2-氨基苯甲酸的合成

以邻苯二甲酸酐为起始原料,经硝化、脱水、酰胺化、霍夫曼重排4步反应合成了3-硝基-2-氨基苯甲酸,总收率19%,其结构经1H NMR, IR和元素分析表征.探讨了酰胺化和霍夫曼重排反应条件对产率的影响.结果表明, n(脲素) ∶ n(3-硝基邻苯二甲酸酐)=2.0 ∶ 1.0,于50 ℃～60 ℃反应5 h～6 h,酰胺化反应收率85%～91%.n(NaClO) ∶ n(3-硝基-2-甲酰胺基苯甲酸)=1.2 ∶ 1.0,于60 ℃反应3 h,重排反应收率94%.     

2-[5-(3-羟基苯甲酰氨基)-1,3,4-噻二唑]基乙酸乙酯的合成

以丙二酸二乙酯为起始原料,经选择性皂化、酸化、氯化、环合和酰胺化反应合成了2-[5-(3-羟基苯甲酰氨基)-1,3,4-噻二唑]基乙酸乙酯(1),总收率37.2%,其结构经1H NMR,13C NMR,IR和LC-MS(ESI)确证。采用正交实验法[L_9(3~4)]优化了酰胺化反应的条件。结果表明:在最优反应条件{n[2-(5-氨基-[1,3,4]-噻二唑)基乙酸乙酯]∶n(三乙胺)∶n(间羟基苯甲酰氯)=1∶2∶3,于20℃反应8 h}下,1收率75.5%。     

1-(5-二茂铁基-1,3,4-噻二唑-2-基)哌啶-2-酮的合成及表征

本文报道1-(5-二茂铁基-1,3,4-噻二唑-2-基)哌啶-2-酮(1)的合成。首先,在乙酸催化下,二茂铁甲醛(2)和氨基硫脲(3)反应得到二茂铁亚胺基硫脲衍生物(4)。然后,在三氯化铁作用下,中间体4发生关环反应得到5-二茂铁基-1,3,4-噻二唑-2-胺(5)。中间体5再与5-溴戊酰氯(6)发生N-酰基化反应得到5-溴-N-(5-二茂铁基-1,3,4-噻二唑-2-基)戊酰胺(7)。最后,在碱性条件下,中间体7发生分子内关环反应得到目标化合物(1)。中间体及产物结构经¹H NMR、¹³C NMR和ESI-MS表征,产物1结构进一步通过X-单晶衍射确证。然后分别考察了中间体5及产物1收率的主要影响因素,确定中间体5合成的适宜条件为：三氯化铁的用量为n(三氯化铁)∶n(中间体4)=4∶1,反应温度80℃,反应时间为15 h,在该条件下,中间体5的收率达到61.9%;确定产物1合成的适宜条件为：反应溶剂为二氧六环,物料比为n(DIEA)∶n(6)∶(5)=3.0∶1.2∶1.0、反应温度为80℃,反应时间为4 h,在该条件下,产物1收率达到68...     

硫酸氢钾催化一锅法合成1-乙酰胺烷基-2-萘酚

以硫酸氢钾为催化剂,在无溶剂条件下催化2-萘酚和乙酰胺分别与苯甲醛、对硝基苯甲醛、水杨醛、茴香醛、香兰素等五种芳香醛的三组分反应,利用一锅法合成了系列1-乙酰胺烷基-2-萘酚.以1-乙酰胺基苯甲基-2-萘酚(AAN)的合成为模板反应考察了催化剂用量、反应温度、原料配比及反应时间等因素对产物收率的影响.结果表明,硫酸氢钾催化合成AAN反应的适宜条件为:n(2-萘酚)∶n(苯甲醛)∶n(乙酰胺)∶n(硫酸氢钾)=1∶1.2∶1.2∶0.05,90℃下反应40min,AAN的收率达92.1%.硫酸氢钾对其他四种反应也有较理想的催化作用,目标产物收率为69.1%～94.0%.     

N-取代-5-氧代吡咯烷-3-甲酸化合物的合成

本文以衣康酸二甲酯为原料,分别和3种脂环胺发生Michael加成反应,得到3种N-取代-5-氧代吡咯烷-3-甲酸甲酯(2a～2c),再经碱性条件下水解得到3种N-取代-5-氧代吡咯烷-3-甲酸(1a～1c)。目标化合物及中间体结构通过~1H NMR、~(13)C NMR和ESI-MS确证。同时,以衣康酸二甲酯与环丁胺的Michael加成反应为模型,确定该步的优化反应工艺为:物料摩尔比n(环丁胺)∶n(衣康酸二甲酯)=1.3∶1,甲苯作溶剂,110℃反应2h。在该反应条件下,化合物2b收率为91.2%,其结构进一步通过X-射线单晶衍射确证。     

合成3-(2-吡啶氨基)丙酸乙酯的工艺改进

以2-氨基吡啶(2)和丙烯酸乙酯(3)为起始原料,经一步反应合成了凝血酶因子抑制剂达比加群酯的关键中间体3-(2-吡啶氨基)丙酸乙酯,其结构经1H NMR和ESI-MS确证.最佳反应条件为:2 120 mmol,n(2)∶n(3) =1.00∶1.08,于100℃回流反应24h,收率79.6％.     

2α-甲基-2β-溴甲基青霉烷酸二苯甲酯的合成

以6,6-二氢青霉烷酸二苯甲酯-1-氧化物(Ⅰ)和2-巯基苯并噻唑为原料,通过热裂解开环反应和溴代环合反应,制备得到了β-内酰胺酶抑制剂他唑巴坦关键中间体2α-甲基-2β-溴甲基青霉烷酸二苯甲酯(Ⅲ)。考察了反应温度、反应时间、物料比、催化剂用量对目标产物的影响。结果表明,在n(Ⅱ)∶n(HBr)∶n(Na NO_2)=1∶3∶6,催化剂质量分数为4%,-5℃反应2. 5h的条件下,收率为85. 4%。产物结构经1HNMR、FTIR、MS等技术手段得到验证。     

呋咱并[3,4-e]-4,6-二氧化-1,2,3,4-四嗪新法合成与表征

自行设计了呋咱并[3,4-e]-1,2,3,4-四嗪-4,6-二氧化(FTDO)新的合成路线,采用3,4-二氨基呋咱(DAF)为起始原料,经过氧化﹑缩合﹑硝化﹑成环4步反应合成了FTDO,总收率为30.89%,并采用核磁共振光谱﹑红外光谱﹑质谱及元素分析等进行了结构表征.探讨了成环反应的机理,并研究了硝化及成环反应条件,确定硝化反应的最佳条件为:硝化试剂为100%HNO3,25℃下反应2 h,收率为99.54%;成环反应的最佳条件为:55℃下反应5 h,n(化合物4)∶n(P2O5)为1∶16,溶剂量为160 mL/g,收率为46.37%.     

含糖基水溶性紫外吸收剂的合成与表征

以三聚氯氰(TCT)、2,4-二羟基二苯甲酮(UV-0)、双丙酮葡萄糖为原料,经三步反应合成一种具有反应性基团的水溶性紫外吸收剂3-(2-(2-羟基苯基苯甲酮-4-氧基)-4-氯-1,3,5-三嗪-6-氧基)-1,2-异丙叉-α-D-葡萄糖(UV-DTM),产物的结构经IR、NMR和MS表征。探讨了每一步反应的条件对反应产率的影响。合成3-(4,6-二氯-1,3,5-三嗪-2-氧基)-1,2,5,6-双异丙叉-α-D-葡萄糖(DTDT)的优化反应条件为:n(三聚氯氰)∶n(双丙酮葡萄糖)∶n(Na OH)=0.9∶1∶1.7,在丙酮和水的混合体系中0℃下反应8h,产率73%。合成3-(2-(2-羟基苯基苯甲酮-4-氧基)-4-氯-1,3,5-三嗪-6-氧基)-1,2,5,6双异丙叉-α-D-葡萄糖(UV-DT)的优化条件为:n(DTDT)∶n(UV-0)∶n(Na OH)=1∶1.1∶1,在丙酮和水的混合体系中30℃下反应2h,产率74%。合成UV-DTM的优化条件为:每1mmol UV-DT与0.5m L盐酸(36%)在THF体系中25℃下反应5h,产率74%。UV-DTM的紫外吸收性能在240~400 nm内表现良好,水溶性得到大幅改善。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.