Crystallization and microstructural evolution of MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>–La<Subscript>2</Subscript>O<Subscript>3</Subscript> glass-ceramics

Crystallization and microstructure of glasses with the molar compositions 1MgO·1.2Al₂O₃·2.8SiO₂·1.2TiO₂·xLa₂O₃ (x = 0.1 and 0.4) were thermally treated at different temperatures in the range from 950 to 1250 °C and then analyzed by X-ray diffraction and scanning electron microscopy, in combination with energy-dispersive X-ray spectroscopy and electron backscatter diffraction. It was found that the microstructure is first homogeneous with the precipitation of randomly distributed crystals and then indialite domains with embedded perrierite and rutile crystals are formed. For higher temperatures or prolonged times, more domains appear and expand into the bulk of the sample. Finally, the entire sample consists of the indialite domains and the boundaries that are enriched in rutile, perrierite, and magnesium aluminotitanate. Nevertheless, very distinct differences are observed between the samples with different La₂O₃ concentrations. For the sample with x = 0.4, the domains were detected at lower temperatures, while the quantity and size of the domains increase faster due to the promoted precipitation of indialite. For the sample with x = 0.1, in addition to the domain boundaries, secondary boundaries between the “regions” (assemblages of the domains) are observed in a larger length scale. The average size of the crystalline phases found between the “regions” is larger than that typically observed at the domain boundaries. The sizes of the crystals at the boundaries decrease with higher concentrations of La₂O₃, and the crystals (especially perrierite) within the domains become larger, resulting in a more homogeneous microstructure. This results in better dielectric properties, i.e., much higher quality factor for the sample with x = 0.4 in comparison to that with x = 0.1 after heat-treatment at 1150 or 1250 °C.     

Spectroscopic characterisation of local structure in Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses doped with gadolinium

Gadolinium doped bismuth borate glasses containing up to 30 mol% Y₂O₃ were prepared by fast melt quenching method. The effect of yttrium on the local order in 3B₂O₃ · Bi₂O₃ and B₂O₃ · Bi₂O₃ glass matrices, particularly on the bismuth sites, was investigated by infrared (IR) spectroscopy and electron paramagnetic resonance (EPR) of Gd³⁺ ions. The IR results show that the local structure is more ordered in the glass system with higher bismuth content and the progressive addition of yttrium increases the local disorder in both bismuth–borate glass matrices. The EPR results indicate that Gd³⁺ ions occupy both bismuth and yttrium sites and reflect the same structural disorder like that suggested by IR results.     

In vitro dissolution behavior of SiO<Subscript>2</Subscript>–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–F glass–ceramic system

Herein, we report the results of the in vitro dissolution tests, which were carried out by immersing the selected glass-ceramic samples in artificial saliva (AS) for various time periods of up to 42 days. In our experiments, the SiO(2)-MgO-Al(2)O(3)-K(2)O-B(2)O(3)-F glass ceramics with different crystal morphology and crystal content were used and a comparison is also made with the baseline glass samples (without any crystals). The bioactivity of the samples was probed by measuring the changes in pH, ionic conductivity and ionic concentration of AS following in vitro dissolution experiments. High resistance of the selected glass-ceramic samples against in vitro leaching has been demonstrated by minimal weight loss (<1%) and insignificant density change, even after 6 weeks of dissolution in artificial saliva. While XRD analysis reveals the change in surface texture of the crystalline phase, FT-IR analysis weakly indicated the Ca-P compound formation on the leached surface. The experimental measurements further indicate that the leaching of F(-), Mg(2+) ions from the sample surface commonly causes the change in the surface chemistry. Furthermore, the presence of (Ca, P, O)-rich mineralized deposits on the leached glass-ceramic surface as well as the decrease in Ca(2+) ion concentrations in the leaching solutions (compared to that in the initial AS solution) provide evidences of the moderate bioactive or mild biomineralisation behaviour of investigated glass-ceramics.     

Influence of Bi substitution on microwave dielectric properties of BaO–La<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> ceramics

The influences of Bi substitution on microwave dielectric properties of Ba₄(La_0.5Sm_0.5)_9.33Ti₁₈O₅₄ solid solutions were investigated. Dielectric ceramics with general formula Ba₄(La_(0.5−z)Sm_0.5Bi _z )_9.33Ti₁₈O₅₄, z = 0.0–0.2 were prepared by conventional solid state route. The structural analysis of all the samples was carried out by X-ray diffraction and scanning electron microscopy. The dielectric properties were investigated as a function of Bi contents using open-ended coaxial probe method in the frequency range 0.3–3.0 GHz at room temperature. Dielectric constant varies from 83 to 88 and loss tangent from 2.1 × 10⁻³ to 5.5 × 10⁻³ at 3 GHz with temperature coefficient of resonant frequency changing from 106.7 to −8.4 ppm/oC as Bi contents increases from z = 0.00–0.20. It has been found that dielectric constant and temperature coefficient of resonant frequency improve whereas loss tangent is adversely affected with increase in Bi substitution.     

Mechanical and acid-etching properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass-containing ceramic fillers

The properties of the composite, having a complicated microstructure, are decided by many factors such as those of glass matrix, crystal phases, fillers, and holes. We investigated how the addition of ceramic fillers to the glass matrix affects the mechanical and etching properties of the glass composite by forming new crystal phases. Different amounts of two fillers, ZnO and Al₂O₃, were added to a glass frit consisting of Bi₂O₃–ZnO–B₂O₃. It was sintered at 550 °C for 30 min. Based on the results of this study, the porosity and degree of crystallization of the composites could be controlled by adjusting the content of the ZnO and Al₂O₃ fillers. Therefore, porosity and degree of crystallization formed by the reaction between a glass matrix and fillers influence the mechanical and etching properties of the composite.     

Evaluation of CaO–SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–Na<Subscript>2</Subscript>O–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> bioglass-ceramics for hyperthermia application

Magnetic bioglass ceramics (MBC) are being considered for use as thermoseeds in hyperthermia treatment of cancer. While the bioactivity in MBCs is attributed to the formation of the bone minerals such as crystalline apatite, wollastonite, etc. in a physiological environment, the magnetic property arises from the magnetite [Fe₃O₄] present in these implant materials. A new set of bioglasses with compositions 41CaO · (52 ? x)SiO₂ · 4P₂O₅  · xFe₂O₃ · 3Na₂O (2 ≤ x ≤ 10 mol% Fe₂O₃) have been prepared by melt quenching method. The as-quenched glasses were then heat treated at 1050°C for 3 h to obtain the glass-ceramics. The structure and microstructure of the samples were characterized using X-ray diffraction and microscopy techniques. X-ray diffraction data revealed the presence of magnetite in the heat treated samples with x ≥ 2 mol% Fe₂O₃. Room temperature magnetic property of the heat treated samples was investigated using a Vibrating Sample Magnetometer. Field scans up to 20 kOe revealed that the glass ceramic samples had a high saturation magnetization and low coercivity. Room temperature hysteresis cycles were also recorded at 500 Oe to ascertain the magnetic properties at clinically amenable field strengths. The area under the magnetic hysteresis loop is a measure of the heat generated by the MBC. The coercivity of the samples is another important factor for hyperthermia applications. The area under the loop increases with an increase in Fe₂O₃ molar concentration and the. coercivity decreases with an increase in Fe₂O₃ molar concentration The evolution of magnetic properties in these MBCs as a function of Fe₂O₃ molar concentration is discussed and correlated with the amount of magnetite present in them.     

Fabrication of Yb<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> Optical Fibers with a Perfect Step-Index Profile by the MCVD Process

An all-vapor phase MCVD process has been proposed for the fabrication of fiber preforms with a Yb₂O₃–Al₂O₃–P₂O₅–SiO₂ multicomponent glass core. We have investigated the tubular preform collapse into a rod and demonstrated approaches capable of preventing P₂O₅ losses in the central part of the core during the collapse process. Preforms with a flat, perfect step-index profile have been fabricated.     

Compositional dependence of the structural and dielectric properties of Li<Subscript>2</Subscript>O–GeO<Subscript>2</Subscript>–ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

(10Li₂O–20GeO₂–30ZnO–(40-x)Bi₂O₃–xFe₂O₃ where x = 0.0, 3, 6, and 9 mol%) glasses were prepared. A number of studies, viz. density, differential thermal analysis, FT-IR spectra, DC and AC conductivities, and dielectric properties (constant ε′, loss tan δ, AC conductivity, σ _ac, over a wide range of frequency and temperature) of these glasses were carried out as a function of iron ion concentration. The analysis of the results indicate that, the density and molar volume decrease with an increasing of iron content indicates structural changes of the glass matrix. The glass transition temperature T _g and onset of crystallization temperature T _x increase with the variation of concentration of Fe₂O₃ referred to the growth in the network connectivity in this concentration range, while glass-forming ability parameter ΔT decrease with increase Fe₂O₃ content, indicates an increasing concentration of iron ions that take part in the network-modifying positions. The FT-IR spectra evidenced that the main structural units are BiO₃, BiO₆, ZnO₄, GeO₄, and GeO₆. The structural changes observed by varying the Fe₂O₃ content in these glasses and evidenced by FTIR investigation suggest that the iron ions play a network modifier role in these glasses while Bi₂O₃, GeO₂, and ZnO play the role of network formers. The temperature dependence of DC and AC conductivities at different frequencies was analyzed using Mott’s small polaron hopping model and, the high temperature activation energies have been estimated and discussed. The dielectric constant and dielectric loss increased with increase in temperature and Fe₂O₃ content.     

Optical properties and crystallization of glasses in the system Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–MoO<Subscript>3</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>

The purpose of this work is to study the optical properties and crystallization of glasses in the ternary system Bi₂O₃–MoO₃–B₂O₃. In order to verify the obtaining of bismuth borate crystal phases several glass compositions have been selected for crystallization. The obtained samples were characterized by X-ray diffraction, scanning electron microscopy and UV–Vis spectroscopy. The UV–Vis spectroscopy showed that the obtained glasses are transparent in the visible region. The values of optical band gap (E _opt) and changes in cut-off (λ_c) depending on composition are reported. It was established that the increase in the MoO₃ content led to decreasing the transmittance of the glasses. Moreover, the absorption edge shifts towards longer wavelength.     

BaFe<Subscript>12</Subscript>O<Subscript>19</Subscript> films produced from BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> heterostructures

BaFe₁₂O₁₉ hexaferrite films have been produced on thermally oxidized single-crystal silicon (SiO₂/Si) substrates by sequential ion-beam sputtering of BaFe₂O₄ and α-Fe₂O₃ targets in an argon-oxygen atmosphere. Their crystal structure has been studied, and the origin of the impurity phases forming during heat treatment has been identified. The results show that heat treatment may lead to the formation of eutectic melts. As a result, the hexaferrite films may contain spherulites.     

System ZnO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>-CuO ⋅ B<Subscript>2</Subscript>O<Subscript>3</Subscript>

Differential thermal analysis and x-ray diffraction data indicate that the ZnO B₂O₃-CuO B₂O₃ join of the ternary system CuO-B₂O₃-ZnO is pseudobinary, with eutectic phase relations and a liquid-liquid miscibility gap in the composition range 25–35 mol % CuO.Translated from Neorganicheskie Materialy, Vol. 41, No. 3, 2005, pp. 339–340.Original Russian Text Copyright © 2005 by Kasumova, Bananyarly.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

The crystallographic orientation relationship between Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> in the composite material Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al–Mg–Si alloy

The formation mechanism of spinels on Al₂O₃ particles in the Al₂O₃/Al–1.0 mass% Mg₂Si alloy composite material has been investigated by transmission electron microscopy (TEM) in order to determine the crystallographic orientation relationship. A thin sample of the Al₂O₃/Al–Mg–Si alloy composite material was obtained by the FIB method, and the orientation relationship between Al₂O₃ and MgAl₂O₄, which was formed on the surface of Al₂O₃ particles, was discovered by the TEM technique as follows:

Preparation and characterization of Li<Subscript>2</Subscript>O–CaO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–SiO<Subscript>2</Subscript> glasses as bioactive material

The aim of the present investigation was to study the role of Al₂O₃ in the Li₂O–CaO–P₂O₅–SiO₂ bioactive glass for improving the bioactivity and other physico-mechanical properties of glass. A comparative study on structural and physico-mechanical properties and bioactivity of glasses were reported. The structural properties of glasses were investigated by X-ray diffraction, Fourier transform infrared spectrometry, scanning electron microscopy and the bioactivity of the glasses was evaluated by in vitro test in simulated body fluid (SBF). Density, compressive strength, Vickers hardness and ultrasonic wave velocity of glass samples were measured to investigate physical and mechanical properties. Results indicated that partial molar replacement of Li₂O by Al₂O₃ resulted in a significant increase in mechanical properties of glasses. In vitro studies of samples in SBF had shown that the pH of the solution increased after immersion of samples during the initial stage and then after reaching maxima it decreased with the increase in the immersion time. In vitro test in SBF indicated that the addition of Al₂O₃ up to 1.5 mol% resulted in an increase in bioactivity where as further addition of Al₂O₃ caused a decrease in bioactivity of the samples. The biocompatibility of these bioactive glass samples was studied using human osteoblast (MG-63) cell lines. The results obtained suggested that Li₂O–CaO–Al₂O₃–P₂O₅–SiO₂-based bioactive glasses containing alumina would be potential materials for biomedical applications.     

Thermal and dielectric properties of the LTCC composites based on the eutectic system BaO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–B<Subscript>2</Subscript>O<Subscript>3</Subscript>

The low-temperature co-fired ceramic (LTCC) composites containing quartz based on the eutectic system BaO–Al₂O₃–SiO₂–B₂O₃ are fabricated at the sintering temperature below 980 °C. Preparation process and sintering mechanism were described and discussed, respectively. The results indicated that the addition of quartz to the eutectic system can availably improve dielectric properties of the LTCC composites. In addition, The LTCC composites with optimum compositions, which were obtained by the regulation of an Al₂O₃ content in the composite, can express excellent dielectric properties (permittivity: 5.94, 5.48; loss: 7 × 10⁻⁴, 5 × 10⁻⁴), considerable CTE values (11.7 ppm. °C⁻¹, 10.6 ppm. °C⁻¹) and good mechanical properties (128 MPa,133 MPa).     

Variable—Range hopping in Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

The dc conductivity of the glasses in the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system was studied at temperatures between 223 and 393 K. At temperatures from 300 to 223 K, T^–1/4 (T is temperature) dependence of the conductivity was found, however, both Mott variable-range hopping and Greaves intermediate range hopping models are found to be applicable. Mott and Greaves parameters analysis gave the density of states at Fermi level N (E_F) = 3.13 × 10²⁰–21.01 × 10²⁰ and 1.93 × 10²¹–16.39 × 10²¹ cm^–3eV^–1 at 240 K, respectively. The variable-range hopping conduction occurred in the temperature range T = 300–223 K, since W_D was found to be large (W_D = 0.08–0.14 eV for these glasses) and dominated the conduction at T < 300 K.     

Mechanochemical behavior of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al–Fe powder mixtures to produce Fe<Subscript>3</Subscript>Al–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite powder

Mechanical treatment of Fe₂O₃, Al and Fe powder mixtures was carried out in a high energy ball mill to synthesize Fe₃Al–Al₂O₃ intermetallic matrix nanocomposite. Different compositions including 3Fe + Al, Fe₂O₃ + 2Al, 3Fe₂O₃ + 8Al and Fe₂O₃ + 3Al+Fe were chosen in this study. Phase development and structural changes occurring during ball milling were investigated by X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results showed that during MA, Fe₂O₃, Al, and Fe react to give a nanocrystalline Fe₃Al intermetallic compound matrix. The presence of pure Fe in initial powder mixture changed the modality of mechanochemical process from sudden to gradual reaction. The Fe₃Al–Al₂O₃ compound had a finer microstructure and particles size compared to the Fe₃Al compound.     

Effect of sintering temperatures on properties of BaO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> glass/silica composites for CBGA package

BaO–B₂O₃–SiO₂–Al₂O₃ (BBSA) glass/silica composites synthesized by solid-state reaction method were developed for CBGA packages, and the effects of sintering temperature (900–950 °C) on the phase transformation, microstructure, thermal, mechanical and electrical properties were investigated. XRD results show that the major phases quartz and cristobalite, and the minor phase BaSi₂O₅ are detected in BBSA composites. Furthermore, it was found that the quartz phase transforms to cristobalite phase at 930–940 °C. The formation of cristobalite phase with higher coefficient of thermal expansion (CTE) led to the increase of CTE value of BBSA composites. However, excessive cristobalite phase content would degrade the mechanical properties and the linearity of thermal expansion of the ceramics. BBSA composites sintered at 920 °C exhibited excellent properties: low dielectric constant and loss (ε_r = 6.2, tanδ = 10^?4 at 1 MHz), high bending strength (179 MPa), high CTE (12.19 ppm/°C) as well as superior linearity of the thermal expansion.     

Hardness properties and microscopic investigation of crack–crystal interaction in SiO<Subscript>2</Subscript>–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–F glass ceramic system

In view of the potential engineering applications requiring machinability and wear resistance, the present work focuses to evaluate hardness property and to understand the damage behavior of some selected glass–ceramics having different crystal morphologies with SiO₂–MgO–Al₂O₃–K₂O–B₂O₃–F composition, using static micro-indentation tests as well as dynamic scratch tests, respectively. Vickers hardness of up to 5.5 GPa has been measured in glass–ceramics containing plate like mica crystals. Scratch tests at a high load of 50 N in artificial saliva were carried out in order to simulate the crack–microstructure interaction during real-time abrasion wear and machining operation. The experimental observations indicate that the novel “spherulitic-dendritic” shaped crystals, similar to the plate like crystals, have the potential to hinder the scratching induced crack propagation. In particular, such potential of the ‘spherulitic-dendritic’ crystals become more effective due to the larger interfacial area with the glass matrix as well as the dendritic structure of each mica plate, which helps in crack deflection and crack blunting, to a larger extent. While modest damage tolerant behavior is observed in case of ‘spherulitic-dendritic’ crystal containing material, severe brittle fracture of plate like crystals were noted, when both were scratched at 50 N load.     

Structure–property correlations in the SiO<Subscript>2</Subscript>–PbO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

SiO₂–PbO–Bi₂O₃ glasses having the composition of 35SiO₂–xPbO–(65−x)Bi₂O₃ (where x = 5, 10, 15, 20, 25, 35, 45; in mol%) have been prepared using the conventional melting and annealing method. Density, molar volume and Vickers microhardness of the prepared glasses were measured. Infrared (IR) and UV–visible spectroscopic techniques were used for structural studies of these glasses. Density as well as the microhardness increase systematically and, conversely, the molar volume decreases with increasing the lead oxide content. This behavior can be explained by the correlation with the glass structure. Increasing the lead oxide content (≥20 mol%) increases the network former PbO₄ groups which can play an important role in increasing the connectivity and compactness of the glass matrix via increasing the cross-linking with the other constituent silicate and bismuthate structural units. The increased compactness may explain, in turn, the increase of the density and microhardness. IR spectra reinforce the idea that bismuth participates in the glassy network predominantly as BiO₆ octahedral structural units. UV–VIS optical absorption spectra revealed UV-charge transfer absorption bands related to the contribution of Pb²⁺ ions in the region 350–385 nm; in addition to the extrinsic absorption of trace iron impurities in the range 220–290 nm. In the visible region, three optical bands in the ranges 415–435, 605–650 and 880–890 nm were correlated with the contribution of electronic transitions in Bi³⁺ ions. Calculation of the optical mobility gap and the width of the energy tail of glass from the UV–VIS absorption indicated a slight increase followed by a decrease in their values. The behavior change occurred at the glass in which PbO content is 20 mol% where lead oxide starts to participate into the glassy matrix as a network former. The combination of analytical FTIR and UV–visible spectroscopy provided a consistent picture of structure–property relations in this glass system.     

Enhanced antibacterial performance of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–Ag and MnFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–Ag nanocomposites

In this work, we have described the antibacterial activities of Fe₃O₄ nanoparticles with different organic parts, including Humic acid (HA), Nicotinic acid (Nico) and Histidine (His), and the antibacterial activity of MnFe₂O₄ nanoparticles coated with PANI and SiO₂ against different bacteria and some standard antibacterial drugs. The present study revealed that the newly fabricated various Fe₃O₄ and MnFe₂O₄ nanocomposites, when combined with some different organic parts, are superiour antibacterial agents. Also, the synthesized nanocomposites can be easily separated from aqueous solution by magnetic filtration without any contamination of the medium.