The scattering of general SH plane wave by interface crack between two dissimilar viscoelastic bodies

The scattering of general SH plane wave by an interface crack between two dissimilar viscoelastic bodies is studied and the dynamic stress intensity factor at the crack-tip is computed. The scattering problem can be decomposed into two problems: one is the reflection and refraction problem of general SH plane waves at perfect interface (with no crack); another is the scattering problem due to the existence of crack. For the first problem, the viscoelastic wave equation, displacement and stress continuity conditions across the interface are used to obtain the shear stress distribution at the interface. For the second problem, the integral transformation method is used to reduce the scattering problem into dual integral equations. Then, the dual integral equations are transformed into the Cauchy singular integral equation of first kind by introduction of the crack dislocation density function. Finally, the singular integral equation is solved by Kurtz's piecewise continuous function method. As a consequence, the crack opening displacement and dynamic stress intensity factor are obtained. At the end of the paper, a numerical example is given. The effects of incident angle, incident frequency and viscoelastic material parameters are analyzed. It is found that there is a frequency region for viscoelastic material within which the viscoelastic effects cannot be ignored. This work was supported by the National Natural Science Foundation of China (No.19772064) and by the project of CAS KJ 951-1-20     

Anti-plane crack moving along the interface of dissimilar piezoelectric materials

The problem of an anti-plane Griffith crack moving along the interface of dissimilar piezoelectric materials is solved by using the integral transform technique. It is shown from the result that the intensity factors of anti-plane stress and electric displacement around the crack tip are dependent on the speed of the Griffith crack as well as the material coefficients. When the two piezoelectric materials are identical, the present result will be reduced to the result for the problem of an anti-plane moving Griffith crack in homogeneous piezoelectric materials. Supported by the National Natural Science Foundation and the National Post-doctoral Science Foundation of China.     

DYNAMIC STRESS FIELD AROUND THE MODE Ⅲ CRACK TIP IN AN ORTHOTROPIC FUNCTIONALLY GRADED MATERIAL

The problem of a Griffith crack in an unbounded orthotropic functionally graded material subjected to antipole shear impact was studied. The shear moduli in two directions of the functionally graded material were assumed to vary proportionately as definite gradient. By using integral transforms and dual integral equations, the local dynamic stress field was obtained. The results of dynamic stress intensity factor show that increasing shear moduli’s gradient of FGM or increasing the shear modulus in direction perpendicular to crack surface can restrain the magnitude of dynamic stress intensity factor.     

Investigation of the behavior of a Griffith crack at the interface of a layer bonded to a half plane using the Schmidt method for the opening crack mode

In this paper, the behavior of a Griffith crack at the interface of a layer boned to a half plane subjected to a uniform tension is investigated by use of the Schmidt method under the assumptions that the effect of the crack surface overlapping very near the crack tips is negligible and also there is a sufficiently large component of mode-I loading so that the crack essentially remains open. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations in which the unknown variables are the jumps of the displacements across the crack surfaces. To solve the dual integral equations, the jumps of the displacements across the crack surfaces are expanded in a series of Jacobi polynomials. Numerical examples are provided to show the effects of the crack length, the thickness of the material layer and the materials constants upon the stress intensity factor of the crack. As a special case in our solution, we also give the solution of the ordinary crack in homogeneous materials. Contrary to the previous solution of the interface crack problem, it is found that the stress singularities of the present interface crack solution are similar with ones for the ordinary crack in homogeneous materials.     

The behavior of a crack in functionally graded piezoelectric/piezomagnetic materials under anti-plane shear loading

Summary In this paper, the behavior of a crack in functionally graded piezoelectric/piezomagnetic materials subjected to an anti-plane shear loading is investigated. To make the analysis tractable, it is assumed that the material properties vary exponentially with the coordinate parallel to the crack. By using a Fourier transform, the problem can be solved with the help of a pair of dual integral equations in which the unknown variable is the jump of the displacements across the crack surfaces. These equations are solved using the Schmidt method. The relations among the electric displacement, the magnetic flux and the stress field near the crack tips are obtained. Numerical examples are provided to show the effect of the functionally graded parameter on the stress intensity factors of the crack.The authors are grateful for financial support from the Natural Science Foundation of Hei Long Jiang Province (A0301), the National Natural Science Foundation of China (50232030, 10172030), the Natural Science Foundation with Excellent Young Investigators of Hei Long Jiang Province(JC04-08) and the National Science Foundation with Excellent Young Investigators (10325208).     

Interaction of general plane P wave and cylindrical inclusion partially debonded from its viscoelastic matrix

The interaction of a general plane P wave and an elastic cylindrical inclusion of infinite length partially debonded from its surrounding viscoelastic matrix of infinite extension is investigated. The debonded region is modeled as an arc-shaped interface crack between inclusion and matrix with non-contacting faces. With wave functions expansion and singular integral equation technique, the interaction problem is reduced to a set of simultaneous singular integral equations of crack dislocation density function. By analysis of the fundamental solution of the singular integral equation, it is found that dynamic stress field at the crack tip is oscillatory singular, which is related to the frequency of incident wave. The singular integral equations are solved numerically, and the crack open displacement and dynamic stress intensity factor are evaluated for various incident angles and frequencies. The project supported by the National Natural Science Foundation of China (19872002) and Climbing Foundation of Northern Jiaotong University     

Investigation of the behavior of a griffith crack at the interface between two dissimilar orthotropic elastic half-planes for the opening crack mode

The behaviors of an interface crack between dissimilar orthotropic elastic halfplanes subjected to uniform tension was reworked by use of the Schmidt method. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, of which the unknown variables are the jumps of the displacements across the crack surfaces. Numerical examples are provided for the stress intensity factors of the cracks. Contrary to the previous solution of the interface crack, it is found that the stress singularity of the present interface crack solution is of the same nature as that for the ordinary crack in homogeneous materials. When the materials from the two half planes are the same, an exact solution can be otained.     

The scattering of harmonic elastic anti-plane shear waves by two collinear cracks in the piezoelectric plate by using the non-local theory

In this paper, the dynamic interaction between two collinear cracks in a piezoelectric material plate under anti-plane shear waves is investigated by using the non-local theory for impermeable crack surface conditions. By using the Fourier transform, the problem can be solved with the help of two pairs of triple integral equations. These equations are solved using the Schmidt method. This method is more reasonable and more appropriate. Unlike the classical elasticity solution, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local dynamic elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum dynamic stress hypothesis. The project supported by the Natural Science Foundation of Heilongjiang Province and the National Natural Science Foundation of China(10172030, 50232030)     

An Interface Crack for a Functionally Graded Strip Sandwiched Between Two Homogeneous Layers of Finite Thickness

In this paper, the behavior of an interface crack for a functionally graded strip sandwiched between two homogeneous layers of finite thickness subjected to an uniform tension is resolved using a somewhat different approach, named the Schmidt method. The Fourier transform technique is applied and a mixed boundary value problem is reduced to two pairs of dual integral equations in which the unknown variables are the jumps of the displacements across the crack surface. To solve the dual integral equations, the jumps of the displacements across the crack surfaces are expanded in a series of Jacobi polynomials. This process is quite different from those adopted in previous works. Numerical examples are provided to show the effects of the crack length, the thickness of the material layer and the materials constants upon the stress intensity factor of the cracks. It can be obtained that the results of the present paper are the same as ones of the same problem that was solved by the singular integral equation method. As a special case, when the material properties are not continuous through the crack line, an approximate solution of the interface crack problem is also given under the assumption that the effect of the crack surface interference very near the crack tips is negligible. Contrary to the previous solution of the interface crack, it is found that the stress singularities of the present interface crack solution are the same as ones of the ordinary crack in homogenous materials.     

A MODE Ⅱ CRACK IN A TWO-DIMENSIONAL OCTAGONAL QUASICRYSTALS

The present study develops the fracture theory for a two-dimensional octagonal quasicrystals. The exact analytic solution of a Mode Ⅱ Griffith crack in the material was obtained by using the Fourier transform and dual integral equations theory, then the displacement and stress fields, stress intensity factor and strain energy release rate were determined, the physical sense of the results relative to phason and the difference between mechanical behaviors of the crack problem in crystal and quasicrystal were figured out. These provide important information for studying the deformation and fracture of the new solid phase.     

The nonlocal solution of two parallel cracks in functionally graded materials subjected to harmonic anti-plane shear waves

In this paper, the dynamic interaction of two parallel cracks in functionally graded materials (FGMs) is investigated by means of the non-local theory. To make the analysis tractable, the shear modulus and the material density are assumed to vary exponentially with the coordinate vertical to the crack. To reduce mathematical difficulties, a one-dimensional non-local kernel is used instead of a two-dimensional one for the dynamic problem to obtain stress fields near the crack tips. By use of the Fourier transform, the problem can be solved with the help of two pairs of dual integral equations, in which the unknown variables are the jumps of displacements across the crack surfaces. To solve the dual integral equations, the jumps of displacements across the crack surfaces are expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present at the crack tips. The non-local elastic solutions yield a finite hoop stress at the crack tips. The present result provides theoretical references helpful for evaluating relevant strength and preventing material failure of FGMs with initial cracks. The magnitude of the finite stress field depends on relevant parameters, such as the crack length, the distance between two parallel cracks, the parameter describing the FGMs, the frequency of the incident waves and the lattice parameter of materials. The project supported by the National Natural Science Foundation of China (90405016, 10572044) and the Specialized Research Fund for the Doctoral Program of Higher Education (20040213034). The English text was polished by Yunming Chen.     

INVESTIGATION OF ANTI-PLANE SHEAR BEHAVIOR OF TWO COLLINEAR CRACKS IN PIEZOELECTRIC MATERIALS BY A NEW METHOD

In this paper, the interaction between two collinear cracks in piezoelectric materials under anti-plane shear loading was investigated for the impermeable crack face conditions. By using the Fourier transform, the problem can be solved with two pairs of triple integral equations. These equations are solved using Schmidt's method. This process is quite different from that adopted previously. This study makes it possible to understand the two collinear cracks interaction in piezoelectric materials. The authors are grateful for financial support from the Post-Doctoral Science Foundation and the Natural Science Foundation of Heilongjiang Province.     

On anti-plane shear behavior of a Griffith permeable crack in piezoelectric materials by use of the non-local theory

In this paper, the non-local theory of elasticity is applied to obtain the behavior of a Griffith crack in the piezoelectric materials under anti-plane shear loading for permeable crack surface conditions. By means of the Fourier transform the problem can be solved with the help of a pair of dual integral equations with the unknown variable being the jump of the displacement across the crack surfaces. These equations are solved by the Schmidt method. Numerical examples are provided. Unlike the classical elasticity solutions, it is found that no stress and electric displacement singularity is present at the crack tip. The non-local elastic solutions yield a finite hoop stress at the crack tip, thus allowing for a fracture criterion based on the maximum stress hypothesis. The finite hoop stress at the crack tip depends on the crack length and the lattice parameter of the materials, respectively. The project supported by the National Natural Science Foundation of China (50232030 and 10172030)     

The 3-D stress intensity factor for a half plane crack in a transversely isotropic solid due to the motion of loads on the crack faces

Three-dimensional analysis of a half plane crack in a transversely isotropic solid is performed. The crack is subjected to a pair of normal point loads moving in a direction perpendicular to the crack edge on its faces. Transform methods are used to reduce the boundary value problem to a single integral equation that can be solved by the Wiener-Hopf technique. The Cagniard-de Hoop method is employed to invert the transforms. An exact expression is derived for the mode I stress intensity factor as a function of time and position along the crack edge. Some features of the solution are discussed through numerical results. The project supported by the Guangdong Provincial Natural Science Foundation and the Science Foundation of Shantou University     

A half plane crack under three-dimensional combined mode impact loading

The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is considered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented. The project supported by the National Natural Science Foundation of China     

A study of dynamic caustics around running interface crack tip

Based on the first invariant of stress singular field in the vicinity of running tip of an interface crack, mapping equations of the caustic curve on the reference plane and the initial curve on the specimen plane are developed. The dynamic caustics are analyzed for the crack propagating along the interface between two bonded dissimilar materials. The variation of the caustic configurations is shown with the velocity change of the running crack and the ratio change of the stress intensity factors. Two characteristic dimensions are proposed that are not only practically measurable from optical caustic contours but also suitable to represent the behavior of transient caustics. The project supported by the National Natural Science Foundation of China and the Scientific Commission of Yunnan Province of China     

Transient response of an insulating crack between dissimilar piezoelectric layers under mechanical and electrical impacts

Summary  The dynamic response of an interface crack between two dissimilar piezoelectric layers subjected to mechanical and electrical impacts is investigated under the boundary condition of electrical insulation on the crack surface by using the integral transform and the Cauchy singular integral equation methods. The dynamic stress intensity factors, the dynamic electrical displacement intensity factor, and the dynamic energy release rate (DERR) are determined. The numerical calculation of the mode-I plane problem indicates that the DERR is more liable to be the token of the crack growth when an electrical load is applied. The dynamic response shows a significant dependence on the loading mode, the material combination parameters as well as the crack configuration. Under a given loading mode and a specified crack configuration, the DERR of an interface crack between piezoelectric media may be decreased or increased by adjusting the material combination parameters. It is also found that the intrinsic mechanical-electrical coupling plays a more significant role in the dynamic fracture response of in-plane problems than that in anti-plane problems. Received 4 September 2001; accepted for publication 23 July 2002 The work was supported by the National Natural Science Foundation under Grant Number 19891180, the Fundamental Research Foundation of Tsinghua University, and the Education Ministry of China.     

Scattering of SHPlease define abbreviation SH waves by arc-shaped interface cracks between a cylindrical magneto-electro-elastic inclusion and matrix: near fields

Summary In this paper, the scattering of SH waves by a magneto-electro-elastic cylindrical inclusion partially debonded from its surrounding magneto-electro-elastic material is investigated by using the wavefunction expansion method and a singular integral equation technique. The debonding regions are modeled as multiple arc-shaped interface cracks with non-contacting faces. The magneto-electric impermeable boundary conditions are adopted. By expressing the scattered fields as wavefunction expansions with unknown coefficients, the mixed boundary-value problem is firstly reduced to a set of simultaneous dual-series equations. Then, dislocation density functions are introduced as unknowns to transform these dual-series equations to Cauchy singular integral equations of the first type,which can be numerically solved easily. The solution is valid for arbitrary number and size of the arc-shaped interface cracks. Finally, numerical results of the dynamic stress intensity factors are presented for the cases of one debond. The effects of incident direction, crack configuration and various material parameters on the dynamic stress intensity factors are discussed. The solution of this problem is expected to have applications in the investigation of dynamic fracture properties of magneto-electro-elastic materials with cracks.The work was supported by the National Natural Science Fund of China (Project No. 19772029) and the Research Fund for Doctors of Hebei Province, China (Project No. B2001213).     

Scattering of SH-waves by an interacting interface linear crack and a circular cavity near bimaterial interface

An analytical method is developed for scattering of SH-waves and dynamic stress concentration by an interacting interface crack and a circular cavity near bimaterial interface. A suitable Green‘s function is contructed, which is the fundamental solution of the displacement field for an elastic half space with a circular cavity impacted by an out-plane harmonic line source loading at the horizontal surface. First, the bimaterial media is divided into two parts along the horizontal interface, one is an elastic half space with a circular cavity and the other is a complete half space. Then the problem is solved according to the procedure of combination and by the Green‘s function method. The horizontal surfaces of the two half spaces are loaded with undetermined anti-plane forces in order to satisfy continuity conditions at the linking section, or with some forces to recover cracks by means of crack-division technique. A series of Fredholm integral equations of first kind for determining the unknown forces can be set up through continuity conditions as expressed in terms of the Green‘s function. Moreover, some expressions are given in this paper, such as dynamic stress intensity factor (DSIF) at the tip of the interface crack and dynamic stress concentration factor (DSCF) around the circular cavity edge. Numerical examples are provided to show the influences of the wave numbers, the geometrical location of the interface crack and the circular cavity, and parameter combinations of different media upon DSIF and DSCF.     

Boundary element method to solve torsion problem of cracked cylinder

Separating the discontinuous solution by use of the single crack solution, together with the regular solution of harmonic function, the torsion problem of a cracked cylinder is reduced to solving a set of mixed-type integral equations and its numerical technique is then proposed by combining the numerical method of singular integral equation with the boundary element method. Several numerical examples are calculated which will be useful to engineering practice. The method proposed is characterized by its fine accuracy and convenience for using, which can be extended to the cases of multiple crack.The project supported by National Natural Science Foundation of China.