冷压烧结溶解法制备多孔泡沫铝合金的研究

对在6061铝合金中加入可溶性填充物混合-压制-烧结-溶解造孔的制备多孔泡沫铝合金方法及其工艺参数进行了探讨，通过控制金属材料与填充材料的尺寸和比例来获得孔径均匀、孔隙率可控的多孔泡沫金属材料，已制备出相对密度为0．5—0．6，平均孔径为0．10-0．25mm，孔隙率为40％-50％的多孔泡沫铝合金试样。该方法较好地解决了直接压制烧结法在高压下破坏了材料的多孔性以及机械强度和高孔隙率不能同时保证的矛盾。     

粉末冶金法制备泡沫Al的工艺研究

系统研究了粉末冶金法制备泡沫舢的工艺条件。通过粉末冶金法制备出了孔隙度为50％～85％，孔径2～5mm的闭孔泡沫Al。讨论了发泡工艺参数对泡沫Al结构的影响。依据试验结果，我们获得的最佳发泡工艺为：发泡温度720℃，发泡时间12min，发泡剂的质量分数为2％。在此条件下可制备出孔隙度大于80％，孔径较均匀的泡沫Al材料。     

粉末冶金发泡法制备泡沫铝工艺研究

泡沫金属是近年来发展起来的一种新型结构功能材料.采用粉末冶金发泡法制备出孔隙率为45%-85%、平均孔径＜5mm的多孔泡沫铝合金试样,并用极差分析法讨论了发泡温度、保温时间和发泡剂的状态对泡沫铝合金的孔隙率的影响,得到了最佳制备工艺条件.     

稀土泡沫铝制备影响因素研究

通过正交试验L_(16)(4~5)得出最佳的稀土泡沫铝合金制备工艺参数：发泡剂的含量0．15％、发泡温度680℃、搅拌时间3min、保温时间10mim；研究稀土添加剂量对泡沫铝材料机械性能的影响,用熔体发泡工艺制备出了低成本、结构可控的高强度稀土泡沫铝合金。     

熔体发泡法制备泡沫鋁的缺陷分析

以TiH2作发泡剂，采用熔体发泡法通过控制发泡温度、保温时间、搅拌速度、冷却方式及各种添加剂含量，成功制备出孔结构基本均匀，孔隙率为60％～85％、平均孔径〈3mm泡沫铝样品。重点分析了泡沫铝制备过程中对孔结构稳定性和均匀性影响因素，针对泡沫铝常见缺陷（缩孔、裂纹、局部大孔），出现的原因提出改进措施。     

冷压-溶解-真空烧结法制备泡沫铝的阻尼性能研究

采用冷压-溶解-真空烧结法制备泡沫铝，并用单自由度稳态正弦激励法对制备的不同孔隙度及不同孔径的泡沫铝的阻尼性能进行了研究，讨论了加入Y2O3对泡沫铝阻尼性能和力学性能的影响。结果表明：泡沫铝的阻尼性能随着孔隙度的增加而增加，随着孔径的增大而减小；加入适量的Y2O3可以改善泡沫铝的阻尼性能和力学性能，当Y2O3加入的质量分数为0．5％～0．8％时泡沫铝达到了最佳的阻尼性能和力学性能，但过量的Y2O3将导致阻尼性能和力学性能降低。     

CaCO3发泡剂制备泡沫铝工艺研究

用CaCO3作发泡剂，用熔体发泡法制备泡沫铝，即Al—Si12在熔融状态下，加入活性剂Mg粉，再与SiC颗粒混合均匀，然后加入发泡剂(CaCO3)搅拌，进行保温发泡，最后冷却。结果表明，对于Al—Si12的合金，用CaCO3作为发泡剂，制备出孔隙结构均匀，平均孔隙率最大、结构均匀的泡沫铝的最优条件是：CaCO3含量1．2％～1．8％，加热温度680～700℃之间，保温时间4～8min之间。     

LF低氟泡沫渣精炼性能实验研究

对LF用低氟泡沫渣的精炼性能进行了实验研究。CaO—A12O3—SiO2系精炼渣的精炼性能和发泡性能存在一定的冲突，需要根据实际生产的要求加以综合考虑。实验中得到合适的LF泡沫精炼渣的组成为，％：CaO45～60，A12O3 30-40．SiO2 10-15，MgO5～10，曼内斯曼指数MI在0.15左右。     

熔体发泡法制备稀土泡沫铝合金试验研究

简述了熔体发泡法制备稀土泡沫铝合金的发泡机理,主要讨论了温度、搅拌时间、发泡剂含量等对其发泡性能的影响及微量稀土元素在泡沫铝合金中的作用,通过实验得出最佳的工艺条件。     

稀土元素添加剂在泡沫铝合金制备中的应用

用稀土添加剂制取高强度稀土铝合金，相对抗拉强度σb相：1．07～1．32；延伸率δ：3．0％～7．5％；常压下添加合金增粘剂发泡剂后制得稀土泡沫合金，气孔率η：12．8％～33．5％。     

China's Major Non-ferrous Metals Imports & Exports

正~~     

Zinc Production by Province in 2014

正~~     

80% of Chinese Firms Purchasing Overseas Mines Ended up in the Red

<正>Minmetals Resources acquired the world’s largest copper mine under construction for USD5.85 billion.One after another,listed companies Jien Nickle,China Molybdenum and Chihong Zinc and Germanium raised money to get involved in overseas mining projects…SOEs and private enterprises are engaged in a frenzy of overseas mine purchasing.A reporter with Economic     

Copper Processing Profit Dropped Sharply,Copper Consumption Will Face Impact in the Second Half of the Year

正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field,     

Central Geological Prospecting Fund Newly Added 16.47 Million Tonnes of Bauxite in 2013

正In 2013,the Central Geological Prospecting Fund(CGPF)Project newly discovered 15 ore fields,including 3 large above ore fields,and 5medium sized ore fields.The reporter learned from the recently published"Annual Report of Central Geological Prospecting Fund Project(2013)"that,from 2006 to 2013 the CGPF     

Manufacturers of Copper Tube for Central Air Conditioner Use Face Mounting Pressure in the Final Quarter of the Year

正This year,the investment growth rate of real estate industry continued to slow down,sold area of commercial housing also dropped significantly,which brought huge pressure to the domestic air conditioning manufactures.In the first half of the year,by relying on high growth in national financial expenditure,along with investment in public infrastructure     

Xinjiang Ranks No.1 in Production of Primary Aluminum in China

正Kang Yi,Honorary Chairman of China Nonferrous Metals Industry Association,said recently at the Forum on Development of the Non-ferrous Metals Industry in Central and Western China held in Zhengzhou that,as more and more electrolytic aluminum factories in Xinjiang came into operation,the electrolytic aluminum output of Xinjiang had reached2,275,000 tons in the first 7 months this year,     

Shenhuo Coal Industry and Electricity Power Completed800,000 t/a Aluminum Project in Xinjiang

正"Xinjiang project has been completed according to schedule,but total completion and total start of production are two different concepts,after completion it still needs a gradual process of reaching production target."On the morning of November 3,Shenhuo Coal Industry and Electricity Power told investors the above statement on the investor interaction platform.     

Guangdong Metal Transaction Center has Become the Second Largest Precious Metal Transaction Platform Nationwide

正The reporter learned from Guangdong Province Precious Metal Transaction Center that in 2013the Center maintained healthy development momentum,and had become the second largest precious metal transaction platform in China in terms of market size;currently Guangdong is quickening steps of financial innovation for the Center,aiming to build a transaction center with international core competitiveness.     

Seven Rare Earth Projects Involving Close to 3 Billion Yuan Investment Landed In the HighTech Zone

正On May 22,Baotou Rare Earth Industry Cooperation Consultation MeetingProject Agreement-signing Ceremony was held in Ningbo,nearly 40 enterprises from Ningbo,Guangdong,Hunan,and Shanxi participated in project consultation.After multi-lateral communication,agreements were signed for a total of 7 rare earth projects successfully.