Correlation between the band positions of (SrTiO3)1-x.(LaTiO2N)x solid solutions and photocatalytic properties under visible light irradiation

N-doped SrTiO3 and (SrTiO3)1-x.(LaTiO2N)x samples were prepared by the thermal ammonolysis method. The photocatalytic activities of the samples were investigated in a water suspension system. Aqueous methanol solution (50 mL CH3OH + 220 mL H2O) for H2 evolution and aqueous silver nitrate solution (270 mL, 0.01 mol L(-1)) for O2 evolution were used as sacrificial reagents. The oxynitrides showed photocatalytic activities under visible light irradiation. The maximum rates of photocatalytic hydrogen and oxygen evolution under visible light irradiation (lambda > 420 nm) were 10 and 8 micromol h(-1), respectively. The samples were characterized by X-ray diffractometry, UV-Vis spectrophotometry, Fourier transform infrared spectrometry, and laser Raman spectroscopy. The unit cell edge length of (SrTiO3)1-x.(LaTiO2N)x increased linearly and their band gaps reduced from 3.18 to 2.04 eV with increasing x from 0 to 0.30. Moreover, the calculation results of (SrTiO3)0.75.(LaTiO2N)0.25 by density functional theory suggested that the band gap narrowing of the solid solutions came from the hybridization of N2p and O2p orbital. The band positions of the solid solutions were further investigated by Mott-Schottky and the onset potential method. The results suggested that the conduction band of the solid solution was lowered, which led to decrement of the hydrogen evolution rate.     

具有强吸附与可见光催化活性的红细胞状Bi3OXy (WO6)1-y (X=Cl、Br、I)固溶体

采用简单的两步水热法,成功制备了Bi₃OX_y(WO₆)_1-y(X=Cl、Br、I)固溶体材料,在改变形貌的同时,增强了吸附与光催化性能。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、光致发光光谱(PL),对3种复合材料的结构和性质进行了详细的表征,推测了固溶体的形成原理。与BW单体相比,BI固溶体的形成使得带隙减小,可见光吸收能力增强,同时光生电子-空穴的复合率也减小。Bi₃OX_y(WO₆)_1-y对于罗丹明B(RhB)阳离子染料具有很强的吸附能力。通过高浓度下的吸附实验,研究了不同材料的吸附动力学。     

具有强吸附与可见光催化活性的类红细胞状Bi3OXy(WO6)1-y(X=Cl、Br、I)固溶体

采用简单的两步水热法，成功制备了Bi₃OX_y(WO₆)_1-y(X=Cl、Br、I)固溶体材料，在改变形貌的同时，增强了吸附与光催化性能。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、光致发光光谱(PL)，对3种复合材料的结构和性质进行了详细的表征，推测了固溶体的形成原理。与BW单体相比，BI固溶体的形成使得带隙减小，可见光吸收能力增强，同时光生电子-空穴的复合率也减小。Bi₃OX_y(WO₆)_1-y对于罗丹明B (RhB)阳离子染料具有很强的吸附能力。通过高浓度下的吸附实验，研究了不同材料的吸附动力学。     

Two-Dimensional Antiferromagnetism in the [Mn(3+x) O(7) ][Bi(4) O(4.5-y) ] Compound with a Maple-Leaf Lattice

The modular compound [Mn(3+x) O(7) ][Bi(4) O(4.5-y) ] contains a rare example of true 2D maple-leaf lattice of edge-sharing Mn(3+/4+) . This compound displays a magnetic transition at 210?K without evidence for a Néel ordering, which indicates in-plane 2D antiferromagnetism.     

In situ construction of oxygen-vacancy-rich Bi~0@Bi_2WO_(6-x) microspheres with enhanced visible light photocatalytic for NO removal

Surface oxygen vacancy defects and metal deposition on semiconductor photocatalysts play a critical role in photocatalytic reactions.In this work,oxygen-deficient Bi_2WO_6 microspheres have been prepared by a facile ethylene glycol-assisted solvothermal method.Bi~0 nanoparticles were reduced by in situ thermaltreatment on Bi_2WO_6 microspheres to obtain Bi~0@Bi_2WO_(6-x) as well as maintaining the oxygen vacancies(OVs) under N_2 atmosphere.Afterwards,photocatalytic NO oxidation removal activities of these photocatalysts were investigated under visible light irradiation and Bi~0@Bi_2WO_(6-x) shows the best NO removal activity than other samples.The photogenerated cha rge separation and trans fe r are promoted by Bi~0 nanoparticles deposited on the surface of semiconductor catalysts.OVs defects promote the activation of reactants(H_2 O and O_2),thereby enhancing the formation of the active substance.Moreover,both OVs defects and Bi~0 metal have the characteristics of extending light absorption and enhancing the efficient utilization of solar energy.Besides,the photocatalytic NO oxidation mechanism of Bi~0@Bi_2WO_(6-x)was investigated by in situ FTIR spectroscopy for reaction intermediates and final products.This work furnishes insight into the synthesis strategy and the underlying photocatalytic mecha nism of the surfacemodified Bi~0@Bi_2WO_(6-x) composite for pollutants removal.     

Beyond the structure-property relationship paradigm: influence of the crystal structure and microstructure on the Li+ conductivity of La2/3Li(x)Ti(1-x)Al(x)O3 Oxides

The crystal structures of several oxides of the La(2/3)Li(x)Ti(1-x)Al(x)O(3) system have been studied by selected-area electron diffraction, high-resolution transmission electron microscopy, and powder neutron diffraction, and their lithium conductivity has been by complex impedance spectroscopy. The compounds have a perovskite-related structure with a unit cell radical2 a(p)x2 a(p)x radical2 a(p) (a(p)=perovskite lattice parameter) due to the tilting of the (Ti/Al)O(6) octahedra and the ordering of lanthanum and lithium ions and vacancies along the 2 a(p) axis. The Li(+) ions present a distorted square-planar coordination and are located in interstitial positions of the structure, which could explain the very high ionic conductivity of this type of material. The lithium conductivity depends on the oxide composition and its crystal microstructure, which varies with the thermal treatment of the sample. The microstructure of these titanates is complex due to formation of domains of ordering and other defects such as strains and compositional fluctuations.     

Photophysical and photocatalytic properties of Ca(1-x)BixVxMo(1-x)O4 solid solutions

New solid solutions with the composition of Ca(1-x)BixVxMo(1-x)O4 prepared by a solid-state method were found as novel photocatalysts with enhanced activity for O(2) evolution from aqueous solutions containing sacrificial reagent AgNO3 under visible-light irradiation (>420 nm). The obtained solid solutions crystallized in tetragonal crystal structures, except one of the end compounds, BiVO4, which crystallized in monoclinic structures. The diffuse reflection spectra of the solid solutions shift monotonically to a long wavelength as the ratio of Bi (V) ions to Ca (Mo) ions increases in the solid solution. The band structure and the dependence of the photocatalytic properties were discussed in relation to the solid-solution compositions and photophysical properties.     

A vibrational study of various K2PdCl(4-x)Br(x) solid solutions

Infrared and Raman vibrational spectra (700-30 cm(-1)) have been recorded on various K2PdCl(4-x)Br(x) (0 < or = x < or = 4) powdered samples at 300 K, including both K2PdCl4 and K2PdBr4 compounds and ten solid solutions with a bromide content varying from 5-95%. Characteristic variations of the sectra clearly demonstrate a wide domain of existence of the solid solutions and the only possible additional existence, due to no IR-Raman coincidence, of the 'trans' planar PdCl4Br2 centrosymmetric anion. A comparison of the vibrational data with results of valence force field calculations allows us to characterize this new anion, in Raman by two signals at 286 and 225 cm(-1) (v sym., Ag, PdCl2 and PdBr2, respectively), in Infrared by not only the two bands at 309 and 200 cm(-1) (v asym. B3u + B2u, of PdCl2 and PdBr2) but also intense deformation modes in the 178-140 cm(-1) wavenumber range. These results suggest slight modifications in the internal f(Pd-Cl) and f(Pd-Br) force constans on going from the PdCl4(2-) or PdBr4(2-) anions to the 'trans' PdCl2Br2(2-) anonic species.     

Photodegradation of toluene over TiO(2-x)N(x) under visible light irradiation

We report the photooxidation of toluene over nitrogen doped TiO(2) (TiO(2-x)N(x)) under visible light irradiation. The photocatalytic oxidation of toluene in air over TiO(2-x)N(x) powders was studied using diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), gas chromatography (GC), ion chromatography (IC), and gas chromatography mass spectrometry (GC-MS), focusing on the photocatalytic decomposition processes of toluene. Results obtained indicate that toluene, weakly adsorbed on the catalyst surface, is initially photooxidized to benzaldehyde which adsorbs onto the TiO(2-x)N(x) surface more strongly, leading to the formation of ring-opening products such as carboxylic acids and aldehydes. No gaseous intermediates were detected during the photooxidation. Major intermediates adsorbed at the catalyst surface were oxalic acid, (COOH)(2), acetic acid, CH(3)COOH, formic acid, HCOOH, and pyruvic acid, CH(3)COCOOH, whereas more complicated carboxylic species, including propionic acid, CH(3)CH(2)COOH, isovaleric acid, (CH(3))(2)CHCH(2)COOH, and succinic acid, (CH(2)COOH)(2), were also found in the early stage of the photooxidation. These intermediate products were gradually photodegraded to CO(2) and H(2)O under visible light irradiation.     

Local structure of actinide dioxide solid solutions Th(1-x)U(x)O2 and Th(1-x)Pu(x)O2

Extended X-ray absorption fine structure (EXAFS) has been utilized to investigate the local atomic structure around Th, U, and Pu atoms in polycrystalline mixed dioxides Th(1-x)M(x)O2 (with M = U, Pu) for x ranging from 0 to 1. The composition dependence of the two first-coordination-shell distances was measured throughout the entire composition range for both solid solutions. The first-shell distances vary slightly across the solid-solution composition with values close to those of the pure dioxide parents, indicating a bimodal cation-oxygen distribution. In contrast, the second-shell distance varies strongly with composition, with values close to the weighted amount average distances. Nevertheless, in both systems, the lattice cell parameters, deduced from the first- and second-shell bond determined by EXAFS, are very close to those measured from X-ray diffraction (XRD). They vary linearly with composition, accurately following Vegard's law.     

Oxonium Ions Substituting Cesium Ions in the Structure of the New High‐Pressure Borate HP‐Cs1−x(H3O)xB3O5 (x=0.5–0.7)

The new high‐pressure borate HP‐Cs_1?x(H₃O)_xB₃O₅ (x=0.5–0.7) was synthesized under high‐pressure/high‐temperature conditions of 6 GPa/900 °C in a Walker‐type multianvil apparatus. The compound crystallizes in the monoclinic space group C2/c (Z=8) with the parameters a=1000.6(2), b=887.8(2), c=926.3(2) pm, β=103.1(1)°, V=0.8016(3) nm³, R1=0.0452, and wR2=0.0721 (all data). The boron–oxygen network is analogous to those of the compounds HP‐MB₃O₅, (M=K, Rb) and exhibits all three structural motifs of borates—BO₃ groups, corner‐sharing BO₄ tetrahedra, and edge‐sharing BO₄ tetrahedra—at the same time. Channels inside the boron–oxygen framework contain the cesium and oxonium ions, which are disordered on a specific site. Estimating the amount of hydrogen by solid‐state NMR spectroscopy and X‐ray diffraction led to the composition HP‐Cs_1?x(H₃O)_xB₃O₅ (x=0.5–0.7), which implies a nonzero phase width.     

Fe x Ti1−2x M x O2 (M=Nb,Ta) rutile solid solutions from gels

In this study, Fe _x Ti_1–2x M _x O₂ (M=Nb, Ta) rutile solid solutions have been synthesized from gels made from Fe(III) acetylacetonate, NbCl₅, TaCl₅, Ta(V) ethoxide, TiCl₄ and Ti(IV) isopropoxide. The results obtained are compared with those obtained by the ceramic method. The solid solutions synthesized from gels were obtained at lower temperatures than these synthesized by the ceramic method.     

Preparation and Characterization of High Purity Al（2-x）Mg（x＋y）Ti（1-y）O（5-0.5x-y） Solid Solution

A small amount of mineralizer MgO was added into Al2TiO5 synthesized from the sludge of aluminum factory to form Al（2-x）Mg（x＋y）Ti（1-y）O（5-0.5x-y） solid solution and inhibit the decomposition of Al2TiO5 solid solution. It increased the content of Al2TiO5 solid solution and improved the thermal stability of materials. In this work,XRD and SEM methods were adopted to characterize the crystalline structure and microstructure of each kind of sample. Rietveld Quantification method was used to determine the content of crystalline phases in each sample. Results show as follows： the optimal addition concentration of MgO was 2.0%,and the corresponding content of Al2TiO5 solid solution which displayed irregular bulk shape was 100%; the addition of mineralizer MgO could enhance the flexural strength and thermal stability of Al2TiO5 solid solution materials. The optimal addition concentration of MgO determined by performance analysis was 2.0%,and its corresponding retention rate of thermal-shock flexural strength was 86.4%. Structure analysis and performance analysis resulted in good accordance.     

BiZn Bond Formation in Liquid Ammonia Solution: [BiZnBi]4−, a Linear Polyanion that is Iso(valence)‐electronic to CO2

Reactions of the zinc(I) complex [Zn₂(Mesnacnac)₂] (Mesnacnac=[(2,4,6‐Me₃C₆H₂)NC(Me)]₂CH) with solid K₃Bi₂ dissolved in liquid ammonia yield crystals of the compound K₄[ZnBi₂]?(NH₃)₁₂ ( 1 ), which contains the molecular, linear heteroatomic [Bi? Zn? Bi]^4? polyanion ( 1 a ). This anion represents the first example of a three‐atomic molecular ion of metal atoms being iso(valence)‐electronic to CO₂ and being synthesized in solution. The analogy of the discrete [Bi? Zn? Bi]^4? anion and the polymeric [(ZnBi_4/2)^4?] unit to monomeric CO₂ and polymeric SiS₂ is rationalized.     

Structural and thermochemical chemisorption of CO2 on Li(4+x)(Si(1-x)Al(x))O4 and Li(4-x)(Si(1-x)V(x))O4 solid solutions

Different Li(4)SiO(4) solid solutions containing aluminum (Li(4+x)(Si(1-x)Al(x))O(4)) or vanadium (Li(4-x)(Si(1-x)V(x))O(4)) were prepared by solid state reactions. Samples were characterized by X-ray diffraction and solid state nuclear magnetic resonance. Then, samples were tested as CO(2) captors. Characterization results show that both, aluminum and vanadium ions, occupy silicon sites into the Li(4)SiO(4) lattice. Thus, the dissolution of aluminum is compensated by Li(1+) interstitials, while the dissolution of vanadium leads to lithium vacancies formation. Finally, the CO(2) capture evaluation shows that the aluminum presence into the Li(4)SiO(4) structure highly improves the CO(2) chemisorption, and on the contrary, vanadium addition inhibits it. The differences observed between the CO(2) chemisorption processes are mainly correlated to the different lithium secondary phases produced in each case and their corresponding diffusion properties.