Enhancement of Dissolution Rate of Gliclazide Using Solid Dispersions with Polyethylene Glycol 6000

The aim of the present study was to enhance the dissolution rate of gliclazide using its solid dispersions (SDs) with polyethylene glycol (PEG) 6000. The phase solubility behavior of gliclazide in presence of various concentrations of PEG 6000 in 0.1 N HCl was obtained at 37 °C. The solubility of gliclazide increased with increasing amount of PEG 6000 in water. Gibbs free energy () values were all negative, indicating the spontaneous nature of gliclazide solubilization and they decreased with increase in the PEG 6000 concentration, demonstrating that the reaction conditions became more favorable as the concentration of PEG 6000 increased. The SDs of gliclazide with PEG 6000 were prepared at 1:1, 1:2 and 1:5 (gliclazide/PEG 6000) ratio by melting-solvent method and solvent evaporation method. Evaluation of the properties of the SDs was performed by using dissolution, Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies. The SDs of gliclazide with PEG 6000 exhibited enhanced dissolution rate of gliclazide, and the rate increased with increasing concentration of PEG 6000 in SDs. Mean dissolution time (MDT)of gliclazide decreased significantly after preparation of SDs and physical mixture with PEG 6000. The FTIR spectroscopic studies showed the stability of gliclazide and absence of well-defined gliclazide–PEG 6000 interaction. The DSC and XRD studies indicated the microcrystalline or amorphous state of gliclazide in SDs of gliclazide with PEG 6000.     

Ditosylate Salt of Itraconazole and Dissolution Enhancement Using Cyclodextrins

Salt formation has been a promising approach for improving the solubility of poorly soluble acidic and basic drugs. The aim of the present study was to prepare the salt form of itraconazole (ITZ), a hydrophobic drug to improve the solubility and hence dissolution performance. Itraconazolium ditolenesulfonate salt (ITZDITOS) was synthesized from ITZ using acid addition reaction with p-toluenesulfonic acid. Salt characterization was performed using ¹H NMR, mass spectrometry, Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction. The particle size and morphology was studied using dynamic light scattering technique and scanning electron microscopy, respectively. The solubility of the salt in water and various pharmaceutical solvents was found multifold than ITZ. The dissolution study exhibited 5.5-fold greater percentage release value in 3 h of ITZDITOS (44.53%) as compared with ITZ (8.54%). Results of in vitro antifungal studies using broth microdilution technique indicate that ITZDITOS possessed similar antifungal profile as that of ITZ when tested against four fungal pathogens. Furthermore, the physical mixtures of ITZDITOS with two cyclodextrins, β-cyclodextrin (β-CD), and 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) were prepared in different molar ratios and were evaluated for in vitro release. It was observed that in only 30 min of dissolution study, about 74 and 81% of drug was released from 1:3 molar ratios of ITZDITOS with β-CD and ITZDITOS with HP-β-CD, respectively, which was distinctly higher than the drug released from ITZ commercial capsules (70%). The findings warrant further preclinical and clinical studies on ITZDITOS so that it can be established as an alternative to ITZ for developing oral formulations.KEY WORDS: antifungal, BCS class II, dissolution rate, insoluble, itraconazole     

Enhancement of Copper Dissolution from a Sulfide Ore by Using Thiobacillus thiooxidans

Copper dissolution from a sulfide ore (with covellite as the main copper phase) was investigated in cultures of Thiobacillus ferrooxidans or Thiobacillus thiooxidans and in abiotic controls. In unsupplemented media, T. ferrooxidans was more efficient than T. thiooxidans. In the presence of ferric iron, the dissolution of covellite was not significantly different in cultures inoculated with T. ferrooxidans or T. thiooxidans. However, the most extraction was found in T. thiooxidans cultures supplemented with ferrous sulfate. The first results were explained by the mechanism proposed by Schippers and Sand (Appl Envir Microbiol 65:319-321, 1999), which involves polysulfides and sulfur as intermediates. This mechanism was extended to explain the behavior of T. thiooxidans culture supplemented with ferrous iron.     

Co-Amorphous Combination of Nateglinide-Metformin Hydrochloride for Dissolution Enhancement

The aim of the present work was to prepare a co-amorphous mixture (COAM) of Nateglinide and Metformin hydrochloride to enhance the dissolution rate of poorly soluble Nateglinide. Nateglinide (120 mg) and Metformin hydrochloride (500 mg) COAM, as a dose ratio, were prepared by ball-milling technique. COAMs were characterized for saturation solubility, amorphism and physicochemical interactions (X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR)), SEM, in vitro dissolution, and stability studies. Solubility studies revealed a sevenfold rise in solubility of Nateglinide from 0.061 to 0.423 mg/ml in dose ratio of COAM. Solid-state characterization of COAM suggested amorphization of Nateglinide after 6 h of ball milling. XRPD and DSC studies confirmed amorphism in Nateglinide, whereas FTIR elucidated hydrogen interactions (proton exchange between Nateglinide and Metformin hydrochloride). Interestingly, due to low energy of fusion, Nateglinide was completely amorphized and stabilized by Metformin hydrochloride. Consequently, in vitro drug release showed significant increase in dissolution of Nateglinide in COAM, irrespective of dissolution medium. However, little change was observed in the solubility and dissolution profile of Metformin hydrochloride, revealing small change in its crystallinity. Stability data indicated no traces of devitrification in XRPD of stability sample of COAM, and % drug release remained unaffected at accelerated storage conditions. Amorphism of Nateglinide, proton exchange with Metformin hydrochloride, and stabilization of its amorphous form have been noted in ball-milled COAM of Nateglinide-Metformin hydrochloride, revealing enhanced dissolution of Nateglinide. Thus, COAM of Nateglinide-Metformin hydrochloride system is a promising approach for combination therapy in diabetic patients.     

Solubility Enhancement of Lovastatin by Modified Locust Bean Gum Using Solid Dispersion Techniques

The aim of the present study was to improve the solubility of poorly water soluble drug lovastatin (LS) by solid dispersion (SD) techniques using modified locust bean gum (MLBG) as a carrier. The locust bean gum (LBG) was modified by heating and there observed irreversible decrease in viscosity, whereas swelling property remains unaffected. The advantage of modification of LBG was illustrated by difference in dissolution profiles of their SD. Effect of polymer concentration and methods of preparation on solubility enhancement were studied using solubility and dissolution studies, respectively. The result of solubility study showed increase in solubility of LS with increase in concentration of MLBG. It was found that the dissolution rate of LS from its SD was dependent on the method of preparation of solid dispersions. Dissolution study revealed that the modified solvent evaporation is most convenient and effective method for solubility enhancement of poorly water soluble drug LS, among various methods of preparation of SD. The prepared SDs were characterized by differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction study. In vivo study was performed by measuring 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG Co-A) reductase inhibition activity. Significant reduction in HMG Co-A reductase activity was observed in case of solid dispersions of LS than plain LS. In conclusion, MLBG could be used as a potential carrier in enhancing the dissolution rate and bioavailability of LS.     

Poloxamer 407-based intranasal thermoreversible gel of zolmitriptan-loaded nanoethosomes: formulation,optimization, evaluation and permeation studies

Zolmitriptan is the drug of choice for migraine, but low oral bioavailability (<50%) and recurrence of migraine lead to frequent dosing and increase in associated side effects. Increase in the residence time of drug at the site of drug absorption along with direct nose to brain targeting of zolmitriptan can be a solution to the existing problems. Hence, in the present investigation, thermoreversible intranasal gel of zolmitriptan-loaded nanoethosomes was formulated by using mucoadhesive polymers to increase the residence of the drug into the nasal cavity. The preparation of ethosomes was optimized by using 3² factorial design for percent drug entrapment efficiency, vesicle size, zeta potential, and polydispersity index. Optimized formulation E6 showed the vesicle size (171.67?nm) and entrapment efficiency (66%) when compared with the other formulations. Thermoreversible gels prepared by using poloxamer 407 showed the phase transition temperature at 32–33?°C which was in line with the nasal physiological temperature. The optimized ethosomes were loaded into the thermoreversible mucoadhesive gel optimized by varying concentrations of poloxamer 407, carbopol 934, HPMC K100, and evaluated for gel strength, gelation temperature, mucoadhesive strength, in vitro drug release, and ex vivo drug permeation, where G3 and G6 were found to be optimized formulations. In vitro drug release was studied by different kinetic models suggested that G3 (n?=?0.582) and G6 (n?=?0.648) showed Korsemeyer–Peppas (K_KP) model indicating non-Fickian release profiles. A permeation coefficient of 5.92 and 5.9?µg/cm² for G3 and G6, respectively, revealed very little difference in release rate after 24?h between both the formulations. Non-toxic nature of the gels on columnar epithelial cells was confirmed by histopathological evaluation.     

Nanocrystallization by Evaporative Antisolvent Technique for Solubility and Bioavailability Enhancement of Telmisartan

Telmisartan is an orally active nonpeptide angiotensin II receptor antagonist used in the management of hypertension. It is a Biopharmaceutics Classification System class II drug having aqueous solubility of 9.9 μg/ml. Telmisartan (TEL) nanocrystals were prepared by evaporative antisolvent precipitation technique using different stabilizers as PVPK30, TPGS, Poloxamer 188, and PEG 6000 in combination or singly. The nanosuspensions were characterized in terms of particle size distribution, zeta potential, and polydispersity index. The suspension containing PVPK30 and TPGS (1:1) showed least average particle size of 82.63 nm and polydispersity index of 0.472. The zeta potential of nanosuspensions ranged between 6.54 and 10.8 mV. An increase of 116.45% was evident in the specific surface area of the freeze-dried product. Contact angle of nanoparticles was also lowered to 27° as compared to 50.8° for TEL. Saturation solubility studies in various media revealed a significant increase in comparison to plain drug. An increase of 3.74× in saturation solubility in FaSSIF and 5.02× in FeSSIF was seen. In vitro dissolution profile of nanosuspension coated on pellets revealed release of 85% in water, 95% in 0.1 N HCl, and 75% in phosphate buffer in 30 min. Nanosuspensions were found to be stable in the presence of univalent and bivalent electrolytes. A tenfold increase in bioavailability was evident. Nanoparticles of telmisartan prepared by bottom-up technique proved to be effective in improving the oral bioavailability as a result of enhanced solubility and dissolution rate.Key words: biorelevant media, contact angle, specific surface area, telmisartan, TPGS     

Comparison of Three Dissolution Apparatuses for Testing Calcium Phosphate Pellets used as Ibuprofen Delivery Systems

Porous calcium phosphate pellets were produced according to two granulation processes (low and high shear wet granulations) and drug loaded with five ibuprofen contents (1.75%, 7%, 12.5%, 22%, and 36%) in order to ensure both bone defect filling and local drug delivery. The drug-release kinetics from the two types of pellets was studied using three dissolution apparatuses: paddle apparatus, reciprocating cylinder, and flow-through cell. The paper compared the three dissolution methods and considered the effect of the granulation process on the ibuprofen-release kinetics. Dissolution data were analyzed using the Weibull function as well as the difference (f1) and similarity (f2) factors. Dissolution kinetics was not influenced by the granulation process, regardless of the dissolution apparatus and of the drug content. The comparison of the three dissolution devices indicated that ibuprofen was released faster from granules loaded with 36% of drug content with the reciprocating apparatus, due to the disintegration of the granules occurring during the dissolution test. For the other drug contents, dissolution profiles were not significantly different from one apparatus to another. However, the flow-through cell seemed to be more suitable for the drug-release study of implantable materials.     

Porous Starch: a Novel Carrier for Solubility Enhancement of Carbamazepine

To circumvent the solubility-related issues associated with Biopharmaceutics Classification System class II drugs, a novel porous carrier has been developed. In the present study, a process for preparation of porous starch (PS) is demonstrated. The process briefly comprises of translucent gel preparation followed by solvent replacement, drying, and sizing. Carbamazepine (CBZ) was used as a drug candidate to exhibit solubility enhancement potential of PS. PS and CBZ-loaded PS (CBZ-PS) systems were characterized with respect to IR, DSC, XRD, SEM, and dissolution kinetic studies. PS-CBZ was found to follow a Fickian behavior during dissolution. In vivo studies conducted in mice displayed a superior performance of CBZ-PS as compared to neat CBZ.     

Application of Pharmaceutical QbD for Enhancement of the Solubility and Dissolution of a Class II BCS Drug using Polymeric Surfactants and Crystallization Inhibitors: Development of Controlled-Release Tablets

The aim of this study was to apply quality by design (QbD) for pharmaceutical development of felodipine solid mixture (FSM) containing hydrophilic carriers and/or polymeric surfactants, for easier development of controlled-release tablets of felodipine. The material attributes, the process parameters (CPP), and the critical quality attributes of the FSMs were identified. Box–Behnken experimental design was applied to develop space design and determine the control space of FSMs that have maximum solubility, maximum dissolution, and ability to inhibit felodipine crystallization from supersaturated solution. Material attributes and CPP studied were the amount of hydroxypropyl methylcellulose (HPMC; X ₁), amount of polymeric surfactants Inutec®SP1 (X ₂), amount of Pluronic®F-127 (X ₃) and preparation techniques, physical mixture (PM) or solvent evaporation (SE; X ₄). There is no proposed design space formed if the Pluronic® content was below 45.1 mg and if PM is used as the preparation technique. The operating ranges, for robust development of FSM of desired quality, of Pluronic®, Inutec®SP1, HPMC, and preparation technique, are 49–50, 16–23, 83–100 mg, and SE, respectively. The calculated value of f2 was 56.85, indicating that the release profile of the controlled-release (CR) tablet (CR-6) containing the optimized in situ-formed FSM was similar to that of the target release profile. Not only did the ternary mixture of Pluronic®, HPMC with Inutec®SP1 enhance the dissolution rate and inhibit crystallization of felodipine, but also they aided Carbopol®974 in controlling felodipine release from the tablet matrix. It could be concluded that a promising once-daily CR tablets of felodipine was successfully designed using QbD approach.     

一种改进的图象模糊增强技术

本文简要地讨论了传统模糊增强算法的原理,并详细讨论了这种算法所存在的缺陷。针对传统模糊增强算法的缺陷,本文提出了一种改进的模糊增强算法。实验证明,改进的的算法在图象的处理质量上得到了提高。     

A Menthol-Based Solid Dispersion Technique for Enhanced Solubility and Dissolution of Sulfamethoxazole from an Oral Tablet Matrix

A menthol-based solid dispersion was designed to improve the intrinsic solubility of the poorly soluble sulfamethoxazole- a class II drug molecule of Biopharmaceutics Classification System (BCS) displaying widespread antibacterial activity. Solid dispersions of menthol and sulfamethoxazole were compressed with hydroxypropyl methylcellulose (HPMC) into suitable sulfamethoxazole-loaded matrix tablets for oral drug delivery. The sulfamethoxazole-loaded solid dispersions and compressed tablets were characterized for their physicochemical and physicomechanical properties such as changes in crystallinity, melting point, molecular transitions, and textural analysis for critical analysis of their effects on the solubility and dissolution of sulfamethoxazole. The formulations were further evaluated for swelling, degradation, solubility, and in vitro drug release behavior. In vitro drug release from the sulfamethoxazole-loaded matrix tablets displayed a minimum and maximum fractional release of 0.714 and 0.970, respectively. The tablets further displayed different release rate profiles over the study periods of 12, 16, 48, and 56 h which were attributed to the varying concentrations of menthol within each formulation. Menthol was determined as a suitable hydrophilic carrier for sulfamethoxazole since it functioned as a solubilizing and release-retarding agent for improving the solubility and dissolution of sulfamethoxazole as well as controlling the rate at which it was released.KEY WORDS: crystallinity, menthol, oral solubility and dissolution, solid dispersion, sulfamethoxazole     

Self-Nanoemulsified Drug Delivery System of Hydrochlorothiazide for Increasing Dissolution Rate and Diuretic Activity

Hydrochlorothiazide (HCTZ) is a class IV drug according to the Biopharmaceutical Classification System. This study aimed the development of self-nanoemulsifying drug delivery system (SNEDDS) for HCTZ as an approach to overcome the biopharmaceutical limitations. Pre-formulation screening and ternary phase diagrams were carried out to select the oil phase, the surfactant, and the co-surfactant as the amount of each constituent. The optimized formulations, with reduced amount of surfactant, and composed of medium chain triglycerides, Cremophor EL and Transcutol P did not affect the pH or show drug incompatibilities. The SNEDDS were stabilized by the nanoscale globules and high negative zeta potential. All the physicochemical characterization assays were performed in biorelevant media to better predict the in vivo performance. The enhanced dissolution rate of the SNEDDS reflected in the in vivo diuretic activity, presenting a natriuresis, kaliuresis, and chloriuresis at early stages and an increased volume of total urine compared with HCTZ alone. The designed SNEDDS produced an improvement in the pharmacodynamics due to high dissolution and probable inhibition of intestinal efflux protein by Cremophor EL. The use of SNEDDS demonstrated to be an efficient approach to modulate the absorption of HCTZ and drug therapeutics.     

Conformational Disorder Enhances Solubility and Photovoltaic Performance of a Thiophene–Quinoxaline Copolymer

The side‐chain architecture of alternating copolymers based on thiophene and quinoxaline (TQ) is found to strongly influence the solubility and photovoltaic performance. In particular, TQ polymers with different linear or branched alkyloxy‐phenyl side chains on the quinoxaline unit are compared. Attaching the linear alkyloxy side‐chain segment at the meta‐ instead of the para‐position of the phenyl ring reduces the planarity of the backbone as well as the ability to order. However, the delocalisation across the backbone is not affected, which permits the design of high‐performance TQ polymers that do not aggregate in solution. The use of branched meta‐(2‐ethylhexyl)oxy‐phenyl side‐chains results in a TQ polymer with an intermediate degree of order. The reduced tendency for aggregation of TQ polymers with linear meta‐alkyloxy‐phenyl persists in the solid state. As a result, it is possible to avoid the decrease in charge‐transfer state energy that is observed for bulk‐heterojunction blends of more ordered TQ polymers and fullerenes. The associated gain in open‐circuit voltage of disordered TQ:fullerene solar cells, accompanied by a higher short‐circuit current density, leads to a higher power conversion efficiency overall. Thus, in contrast to other donor polymers, for TQ polymers there is no need to compromise between solubility and photovoltaic performance.     

Optimization of Non-Nutritional Factors for a Cost-Effective Enhancement of Nisin Production Using Orthogonal Array Method

In order to increase nisin production in a cost-effective manner, non-nutritional factors as well as nutritional parameters must be optimized. In this study, optimization of the most important non-nutritional factors for nisin production using orthogonal array method was performed. Optimization of temperature, agitation, age and size of inoculum, medium initial pH value and flask volume/medium volume ratio in de Man, Rogosa and Sharpe (MRS) medium in batch fermentation was accomplished. Nisin was produced by Lactococcus lactis subsp. lactis PTCC 1336 and measured by bioassay method using Micrococcus luteus PTCC 1169 as the nisin-sensitive strain. The optimum levels of non-nutritional factors for maximum nisin production and productivity were obtained as: flask volume/medium volume ratio: 5.00, medium initial pH value: 8.00, inoculum size: 1%, inoculum age: 24 h old (A = 1.7), agitation: 100 rpm and temperature: 27 °C. Under the optimized conditions, maximum nisin production and maximum nisin productivity were 599.70 IU/mL and 37.48 IU/mL/h, respectively.     

The Effect of Polysorbate 20 on Solubility and Stability of Candesartan Cilexetil in Dissolution Media

The addition of polysorbate 20 (T20) is required to achieve “sink” conditions during a dissolution test for tablets with candesartan cilexetil (CC). Polysorbate 20 (0.35%–0.7% w/w) added to 0.05 mol/L of phosphate buffer pH 6.5 dramatically increased the apparent solubility of the drug from 0.8 μg/ml even to 353 μg/ml, while its effect in lower pH or in water was much smaller (20 μg/ml in pH 4.5). The increased concentration of phosphate salts (0.2 mol/l) at pH 6.5 in the presence of 0.7% of polysorbate 20, resulted in further increase of candesartan cilexetil solubility to 620 μg/ml. The change of pH from 1.2 to 7.4 resulted in a 1.5-fold increase of the activation energy and, depending on temperature, 8–14-fold decrease of the degradation rate. When polysorbate 20 increased the activation energy 2-fold, independent of pH, it protected candesartan cilexetil from degradation; however, this effect was temperature dependent and was very small at 310 K—the degradation rate in pH 6.5 decreased by 13% only. It was calculated that in the phosphate buffer pH 6.5 with polysorbate, one can expect during 24 h the degradation at the level of 9.3%, thus a flow-through dissolution apparatus was recommended for testing prolonged release dosage forms.     

Enhancement of Dissolution and Skin Permeability of Pentazocine by Proniosomes and Niosomal Gel

Proniosomes (PN) are the dry water-soluble carrier systems that may enhance the oral bioavailability, stability, and topical permeability of therapeutic agents. The low solubility and low oral bioavailability due to extensive first pass metabolism make Pentazocine as an ideal candidate for oral and topical sustained release delivery. The present study was aimed to formulate the PNs by quick slurry method that are converted to niosomes (liquid dispersion) by hydration, and subsequently formulated to semisolid niosomal gel. The PNs were found in spherical shape in the SEM and stable in the physicochemical and thermal analysis (FTIR, TGA, and XRD). The quick slurry method produced high recovery (>?80% yield) and better flow properties (θ?=?28.1–37.4°). After hydration, the niosomes exhibited desirable entrapment efficiency (44.45–76.23%), size (4.98–21.3 μm), and zeta potential (??9.81 to ??21.53 mV). The in vitro drug release (T_100%) was extended to more than three half-lives (2–4 h) and showed good fit to Fickian diffusion indicated by Korsmeyer-Peppas model (n?=?0.136–0.365 and R²?=?0.9747–0.9954). The permeation of niosomal gel was significantly enhanced across rabbit skin compared to the pure drug-derived gel. Therefore, the PNs are found promising candidates for oral as dissolution enhancement and sustained release for oral and topical delivery of pentazocine for the management of cancer pain.     

Preparation and Characterization of Co-Grinded Mixtures of Aceclofenac and Neusilin US2 for Dissolution Enhancement of Aceclofenac

The present study was carried out with a view to enhance the dissolution of poorly water-soluble BCS-class II drug aceclofenac by co-grinding with novel porous carrier Neusilin US_2. (amorphous microporous granules of magnesium aluminosilicate, Fuji Chemical Industry, Toyama, Japan). Neusilin US₂ has been used as an important pharmaceutical excipient for solubility enhancement. Co-grinding of aceclofenac with Neusilin US₂ in a ratio of 1:5 was carried out by ball milling for 20 h. Samples of co-ground mixtures were withdrawn at the end of every 5 h. and characterized for X-ray powder diffraction, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The analysis revealed the conversion of crystalline aceclofenac to its amorphous form upon milling with Neusilin US₂. Further, in vitro dissolution rate of aceclofenac from co-ground mixture was significantly higher compared to pure aceclofenac. The accelerated stability study of co-ground mixture was carried out at 40°C/75%RH for 4 weeks, and it showed that there was no reversion from amorphous to crystalline form. Thus, it is advantageous to use a porous carrier like Neusilin US₂ in improvement of dissolution of poorly soluble drugs.