Reactions of the cationic diruthenium carbonyl complex [Ru2(μ-dppm)2(CO)4(μ,η-O2CMe)] with bidentate ligands; intramolecularly assisted stereospecific synthesis via the second-sphere face-to-face π–π stacking interactions

The reactions of the diruthenium carbonyl complexes [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]X (X=BF₄⁻ (1a) or PF₆⁻ (1b)) with neutral or anionic bidentate ligands (L,L) afford a series of the diruthenium bridging carbonyl complexes [Ru₂(μ-dppm)₂(μ-CO)₂(η²-(L,L))₂]X_n ((L,L)=acetate (O₂CMe), 2,2′-bipyridine (bpy), acetylacetonate (acac), 8-quinolinolate (quin); n=0, 1, 2). Apparently with coordination of the bidentate ligands, the bound acetate ligand of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ either migrates within the same complex or into a different one, or is simply replaced. The reaction of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ (1) with 2,2′-bipyridine produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)₂] (2), [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-bpy)]⁺ (3), and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-bpy)₂]²⁺ (4). Alternatively compound 2 can be prepared from the reaction of 1a with MeCO₂H–Et₃N, while compound 4 can be obtained from the reaction of 3 with bpy. The reaction of 1b with acetylacetone–Et₃N produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-acac)] (5) and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-acac)₂] (6). Compound 2 can also react with acetylacetone–Et₃N to produce 6. Surprisingly [Ru₂(μ-dppm)₂(μ-CO)₂(η²-quin)₂] (7) was obtained stereospecifically as the only one product from the reaction of 1b with 8-quinolinol–Et₃N. The structure of 7 has been established by X-ray crystallography and found to adopt a cis geometry. Further, the stereospecific reaction is probably caused by the second-sphere π–π face-to-face stacking interactions between the phenyl rings of dppm and the electron-deficient six-membered ring moiety of the bound quinolinate (i.e. the N-included six-membered ring) in 7. The presence of such interactions is indeed supported by an observed charge-transfer band in a UV–vis spectrum.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

A new route to complexes containing the tetracarbon (C4) ligand

Pyrolysis of a solution of {Ru₃(CO)₁₁}₂(μ-bdpp) (bdpp = bis(diphenylphosphino)butadiyne) yielded the complex {Ru₃(μ-PPh₂)(CO)₉}₂(μ₆-C₄), which contains a μ₆-C₄ ligand symmetrically bridging two Ru₃(μ-PPh₂)(CO)₉ clusters. When the complex {Fe(CO)₄}₂(μ-bdpp) was heated in the presence of Fe₂(CO)₉ another example of a C₄ complex, {Fe₂(μ-PPh₂)(CO)₆}₂(μ-C₄), was obtained. Both complexes were characterised by X-ray structure determinations; the C₄ ligand behaves as a buta-1,3-diyne-1,4-diyl system.     

Structures and Mössbauer spectra of phosphido-bridged heterobimetallic complexes CpFe(CO)2(μ-PPh2)W(CO)5 and CpFe(CO)(μ-CO)(μ-PPh2)W(CO)4

Structures of non metal-metal bonded phosphido-bridged heterobimetallic complexes, including CpFe(CO)₂(μ-PPh₂)W(CO)₅ (1-W) and metal-metal bonded CpFe(CO)(μ-CO)(μ-PPh₂)W(CO)₄ (2), were determined by a single crystal X-ray diffraction study. In 1-W, the long distance between Fe and W indicates no metal-metal bond to exist. In 2, a Fe---W bond with bond length 2.851 Å and a semibridging carbonyl with W---C---O angle 153° were observed. Mössbauer spectra of 1-W and 2 were taken at 77 K. Isomer shifts of 1-W and 2 were − 0.0203 mm s⁻¹ and 0. 1917 mm s⁻¹ respectively.     

Preparation, structures, and haptotropic rearrangement of novel dinuclear ruthenium complexes, (μ2,η:η-guaiazulene)Ru2(CO)4(CNR)

Novel isonitrile derivatives of a diruthenium carbonyl complex, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₅ (2), were synthesized by substitution of a CO ligand by an isonitrile, and were subjected to studies on thermal and photochemical haptotropic interconversion. Treatment of 2 (a 45:55 mixture of two haptotropic isomers, 2-A and 2-B) with RNC at room temperature resulted in coordination of RNC and alternation of the coordination mode of the guaiazulene ligand to form (μ₂,η¹:η⁵-guaiazulene)Ru₂(CO)₅(CNR), 5d–5f, [5d; R=^tBu, 5e; 2,4,6-Me₃C₆H₂, or 5f; 2,6-ⁱPr₂C₆H₃] in moderate to good yields. Thermal dissociation of a CO ligand from 5 at 60 °C resulted in quantitative formation of a desirable isonitrile analogue of 2, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₄(CNR), 4d–4f, [4d; R=^tBu, 4e; 2,4,6-Me₃C₆H₂, or 4f; 2,6-ⁱPr₂C₆H₃], as a 1:1 mixture of the two haptotropic isomers. A direct synthetic route from 2 to 4d–4f was alternatively discovered; treatment of 2 with one equivalent of RNC at 60 °C gave 4d–4f in moderate yields. All of the new compounds were characterized by spectroscopy, and structures of 5d (R=^tBu) and 4d-A (R=^tBu) were determined by crystallography. Thermal and photochemical interconversion between the two haptotropic isomers of 4d–4f revealed that the isomer ratios in the thermal equilibrium and in the photostatic state were in the range of 48:52–54:46.     

Tert-butylbenzamidate diruthenium(II, III) compounds. Crystal structure of [Ru2(μ-HNOCC6H4-p-CMe3)4(OPPh3)2]BF4

The reaction between Ru₂Cl(μ-O₂CCH₃)₄ and molten p-tert-butylbenzamide led to the formation of Ru₂Cl(μ-HNOCC₆H₄-p-CMe₃)₄. The polymeric structure of this insoluble compound was broken with AgBF₄, in anhydrous thf, giving [Ru₂(μ-HNOCC₆ H₄-p-CMe₃)₄(thf)₂]BF₄. The reaction of this cationic complex with OPPh₃ gave [Ru₂(μ-HNOCC₆H₄-p-CMe₃)₄(OPPh₃)₂]BF₄. The compounds have been characterized by elemental analysis, spectroscopic data and magnetic measurements and the crystal structure of [Ru₂(μ-HNOCC₆H₄-p-CMe₃)₄(OPPh₃)₂]BF₄ was determined by X-ray crystallography. The asymmetric unit is composed of halves of two different crystallographically independent centrosymmetric cations. Each ruthenium(II,III) dimer is bonded to four bridging p-tert-butylbenzamidate ligands and to two axial triphenylphosphine oxide molecules. The Ru---Ru distances in the two dimeric cations of the unit cell are 2.281(2) and 2.280(2) Å. The compound has a non-polar 2 : 2 arrangement of the tert-butylbenzamidate ligands.     

Rhenium(I) methoxo carbonyl complexes containing tetraphosphine or triphosphine ligands; facile separation and X-ray crystallographic studies of d/l- and meso-[{Re2(μ-OMe)2(CO)6}2(μ,μ′-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetra-phosphadecane)]

Reaction of the activated mixture of Re₂(CO)_10, Me₃NO and MeOH with a 1:1 mixture of rac (d/l)- and meso-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane (hptpd) yields a mixture of (d/l)- and meso-[{Re₂(μ-OMe)₂(CO)₆}₂(μ,μ′-hptpd)] 1. The diastereomers can be easily separated by selective dissolution of d/l-1 in benzene, and give clearly distinguishable ¹H- and ³¹P-NMR spectra. The fluxional behavior of d/l-1 in solution has been studied by variable-temperature ¹H- and ³¹P-{¹H}-NMR spectroscopy. The crystal structures of both d/l- and meso-1 have been determined. Both molecules consist of two {Re₂(μ-OMe)₂(CO)₆} moieties which are bridged by the two P---CH₂---CH₂---P moieties of the hptpd ligand. Whilst the molecules of meso-1 possess crystallographic i-symmetry, those of d/l-1 do not have any crystallographic symmetry. These diastereomers therefore give clearly distinguishable Raman spectra in the solid state. Reaction of tris[2-(diphenylphosphino)ethyl]phosphine (tdppep) with the activated mixture affords the complex [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-tdppep)] 2, and the analogous reaction involving bis[2-diphenylphospinoethyl)phenylphosphine (triphos) gives [{Re₂(μ-OMe)₂(CO)₆}(μ,μ′,η³-triphos){Re₂(CO)₉}] 3 and [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-triphos)] 4.     

The reaction of (μ-H)2Os3(CO)9(PPh3) with ethylene affords the ethylidene complex (μ-H)2Os3(CO)9(PPh3)(μ-CHCH3)

The product isolated from the reaction of (μ-H)₂Os₃(CO)₉(PPh₃) with ethylene is shown to be the ethylidene complex (μ-H)₂Os₃(CO)₉(PPh₃)(μ-CHCH₃) (1) rather than the ethylene complex (μ-H)(H)Os₃(CO)₉(PPh₃)(C₂H₄), as previously claimed. The characterization of 1 is based on a combination of ¹H and ¹³C NMR results. The ¹H NMR data (δ 6.84 (1 H_D), 2.53 (3 H_C), J(CD) = 7.4 Hz) establish the presence of the ethylidene moiety, whereas detailed analysis of the 1-D and 2-D ¹³C NMR spectra of ¹³CO-enriched 1 indicates the relative positions of the ethylidene, hydride, and phosphine ligands on the triosmium framework.     

The coordinatively unsaturated cluster cations [Pt3{M(CO)3}(μ-Ph2PCH2PPh2)3] (M = Re, Mn)

The coordinatively unsaturated cluster [Pt₃(μ₃-CO)(μ-dppm)₃]²⁺ (1, dppm = Ph₂PCH₂PPh₂) reacts with Na⁺[M(CO)₅]⁻ to give the mixed metal clusters [Pt₃{M(CO)₃}(μ-dppm)₃]⁺ (M = Re, 2; Mn, 3). The new clusters are characterized by spectroscopic methods and, for M = Re, by an X-ray structure determination. The Pt₃Re core in 2 is tetrahedral with particularly short metal-metal distances.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.     

Synthesis and reactions of H3Ru3(μ3-CSet)(CO)9. Reductive elimination of C---H bonds and insertion of alkynes into Ru---C and Ru---H bonds

Synthesis of H₃Ru₃(μ₃-CSEt)(CO)₉, is accomplished by base-promoted attack of ethanethiol on H₃Ru₃(μ₃-CBr)(CO)₉. Thermolysis of this product under CO yields HRu₃(CH₂SEt)(CO)₉. Reactions of H₃Ru₃(μ₃-CSEt)(CO)₉ with alkynes C₂R₂ form HRu₃(μ₃-η³-EtSCCRCR)(CO)₉ (R = Me or Ph) and Ru₃ (cis-CR=CHR)(CSEt)(CO)₉ (R = Me). The chemistry of H₃Ru₃(μ₃-CSEt)(CO)₉ differs significantly from that of the analogous ether derivative H₃Ru₃(μ₃-COMe)(CO)₉.     

Synthesis and reactivity towards tetrafluoroboric acid of a new family of heterobimetallic polyhydride complexes [(CO)(PPh3)2HRe(μ-H)3RhL2] (L = PPh3, 1,2,5-triphenylphosphole, or P(OMe)3)

The reaction of K[ReH₆(PPh₃)₂] with [RhCl(CO)L₂] [L= PPh₃, 1,2,5-triphenylphosphole (TPP), or P(OMe)₃] leads to the new electronically unsaturated heterobimetallic polyhydride complexes [(CO)(PPh₃)₂HRe(μ-H)₃RhL₂] in moderate-to-good yields. The structures of these complexes have been established on the basis of spectroscopic data, especially ¹H and ³¹P NMR. The bridging hydride ligands are fluxional but there is either a slow or nonexistent exchange between terminal and bridging hydrides. For L = PPh₃ or TPP, protonation with tetrafluoroboric acid affords quantitatively the cationic complexes [(CO)(PPh₃)₂HRe(μ-H)₃RhHL₂]⁺, isolated as the BF₄⁻ or the BPh₄⁻ salts.     

A novel arene bonding mode in the mixed-metal cluster Os4Ru(μ-H) 3(CO) 12(μ3-η-C6H5) P(OMe)3

The ionic coupling of [Os₄H₂(CO)₁₂]²⁻ with [Ru(η⁶-C₆H₆)(MeCN)₃]²⁺ affords the neutral mixed metal cluster Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆) 1. The reaction of 1 with trimethylphosphite leads to the initial formation of the addition product Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆)P(OMe)₃ 2, but this complex rearranges in solution to give Os₄Ru(μ-H)₃(CO)₁₂(μ₃-η⁶-C₆H₅)P(OMe)₃ 3. An X-ray structure of 3 shows that the metal core of the cluster is a ruthenium-spiked Os₄ tetrahedron, with one hydrogen atom from the arene having transferred to the Os₄ core, and one arene carbon bridging an Os-Os edge, while the ring as a whole remains η⁶-bound to the Ru atom.     

Determination of the free activation energy for the breaking of the P---Ag bond in [(η-p-cymene)Ru(μ-pz)3Ag(PPh3)]

The Arrhenius equation corresponding to the process P---Ag+P*---Ag*→---P---Ag*+P*---Ag has been determined for [(η⁶-p-cymene)Ru(μ-pz)₃Ag(PPh₃)] (1) by complete line-shape analysis of the ³¹P NMR spectra between −40°C and +30°C. It has the form K = 10^11.8± e^{(−46±5 kJ mol−1/RT)}. The preexponential term, log A = 11.8 corresponds to a small activation entropy, whereas the activation energy, 46 kJ mol⁻¹ is comparable to those determined for other phosphorus—metal compounds.     

Synthesis and crystal structure of the novel trimanganese tetrathiolate incomplete cubane: [Mo(η-C5H5)2(H)CO][Mn3(CO)9(μ-SC6H5)4]

An unexpected trimanganese(I) tetrathiolate-bridged complex, [Mn₃(CO)₉(μ-SC₆H₅)₄]⁻, with an incomplete cubane structure, was obtained by thermal reaction of [Mn₂(CO)₁₀] with [Mo(η⁵-C₅H₅)₂(SC₆H₅)₂]. The structure, established by single-crystal X-ray diffraction studies, shows the cation, [Mo(η⁵-C₅H₅)₂(H)CO]⁺, directed towards the vacant site of the cubane structure. Possible routes by which the anion and the cation could be formed are discussed.