涡激诱导并列双圆柱碰撞数值模拟研究

圆柱类结构物的涡激振动是工程中较为常见的一种现象,如果圆柱结构物之间的距离较小, 就会产生涡激诱导碰撞现象,而涡激碰撞会比涡激振动对结构物疲劳破坏产生更严重的威胁.采用浸入边界法模拟流体中的动边界问题,避免了传统贴体网格方法在求解流体中存在固体间碰撞问题时出现数值求解不稳定问题,采用有限元方法对圆柱的运动和碰撞进行求解,通过数据回归方法建立了流体流动条件下的润滑模型,对不同间隙比下涡激诱导并列双圆柱振动及碰撞过程进行了数值模拟, 数值结果表明,如果两圆柱产生了碰撞将会有连续的碰撞发生, 碰撞时出现了多阶频率,振动主频率要比无碰撞时大, 两圆柱碰撞时的相对速度比自由来流速度小;当两圆柱相互接近时, 随着涡环分离角度的逐渐倾斜, 横向流体力先逐渐减小,当两圆柱间涡环开始相互影响发生挤压时, 横向流体力开始逐渐增大;当两圆柱开始反弹时, 两圆柱间形成了低压区, 改变了横向流体阻力的方向,使两圆柱又产生了接近运动,如此反复从而产生了碰撞后横向流体力和圆柱速度的振荡现象.      

涡激诱导并列双圆柱碰撞数值模拟研究

圆柱类结构物的涡激振动是工程中较为常见的一种现象,如果圆柱结构物之间的距离较小,就会产生涡激诱导碰撞现象,而涡激碰撞会比涡激振动对结构物疲劳破坏产生更严重的威胁.采用浸入边界法模拟流体中的动边界问题,避免了传统贴体网格方法在求解流体中存在固体间碰撞问题时出现数值求解不稳定问题,采用有限元方法对圆柱的运动和碰撞进行求解,通过数据回归方法建立了流体流动条件下的润滑模型,对不同间隙比下涡激诱导并列双圆柱振动及碰撞过程进行了数值模拟,数值结果表明,如果两圆柱产生了碰撞将会有连续的碰撞发生,碰撞时出现了多阶频率,振动主频率要比无碰撞时大,两圆柱碰撞时的相对速度比自由来流速度小;当两圆柱相互接近时,随着涡环分离角度的逐渐倾斜,横向流体力先逐渐减小,当两圆柱间涡环开始相互影响发生挤压时,横向流体力开始逐渐增大;当两圆柱开始反弹时,两圆柱间形成了低压区,改变了横向流体阻力的方向,使两圆柱又产生了接近运动,如此反复从而产生了碰撞后横向流体力和圆柱速度的振荡现象.     

柔性圆柱涡激振动流体力系数识别及其特性

涡激振动是诱发海洋立管、浮式平台系泊缆和海底悬跨管道等柔性圆柱结构疲劳损伤的重要因素.目前,海洋工程中用于柔性圆柱涡激振动预报的流体力系数主要来源刚性圆柱横流向受迫振动的实验数据,存在一定缺陷和误差.本文综合考虑横流向与顺流向振动耦合作用,建立了柔性圆柱涡激振动流体力模型,运用有限元法和最小二乘法确定升力系数、脉动阻力系数和附加质量系数.为了准确识别柔性圆柱涡激振动流体力系数,设计并开展了拖曳水池模型实验,实验用柔性圆柱模型的质量比为1.82,长径比为195.5.通过与刚性圆柱流体力系数对比,深入分析了柔性圆柱流体力系数的特性.结果表明:柔性圆柱在一阶模态控制区,流体力系数随约化速度变化趋势与刚性圆柱大致相似;二阶模态控制区,升力系数和脉动阻力系数显著增大;附加质量系数在响应频率较低时与振动位移的相关性增强;当响应频率较低时,振动位移较大区域为能量耗散区,当响应频率较高时,振动位移较大区域为能量输入区.     

不同剪切率来流作用下柔性圆柱涡激振动数值模拟

采用浸入边界法对细长柔性圆柱在线性剪切流条件下的涡激振动进行三维数值模拟。细长柔性圆柱振动采用三维索模型模拟,其两端铰接,质量比为6,长细比为50,无量纲顶张力为496。来流为线性剪切流,剪切率从0到0.024变化,最大雷诺数为250。研究发现:剪切流作用下柔性立管横流向振动表现为驻波模式,而顺流向振动表现为行波-驻波混合模式。随着剪切率增大,振动频谱呈现多频响应,振动能量逐渐向低频转移。阻力系数平均值随着展向变化,脉动阻力系数和升力系数的均方根值均表现为“双峰”模式。流固能量传递系数沿立管轴向的分布表明,振动激励区集中于高流速区,而振动阻尼区多位于低流速区。剪切率较小时,圆柱的泻涡为平行交叉模式;剪切率较大时,圆柱的泻涡为倾斜泻涡模式,且由于泻涡频率沿立管轴向变化,尾流发生涡裂现象,形成泻涡频率不同的胞格结构。      

海洋柔性结构涡激振动的流固耦合机理和响应

对近几十年来国内外在涡激振动的基础研究包括机理认识和动响应分析等方面的进展进行了论述,尤其针对海洋油气平台中的立管、隔水管等细长柔性结构的涡激振动.描述了涡激振动这种典型的非线性流固耦合现象所具有的特征,包括自激、自限制、展向相关、尾迹水动力与结构动力的流固耦合等及其主要影响参数.介绍了目前常用的结构响应预测方法和相关实验.通过讨论当前理论研究和实际工程中的热点问题,诸如多模态宽带振动、浮体运动与水下立管的耦合、响应抑制措施、双向振动、高雷诺数下的大尺度物理实验等,对今后该领域的研究方向进行了力所能及的展望.     

不同剪切率来流作用下柔性圆柱涡激振动数值模拟

采用浸入边界法对细长柔性圆柱在线性剪切流条件下的涡激振动进行三维数值模拟.细长柔性圆柱振动采用三维索模型模拟,其两端铰接,质量比为6,长细比为50,无量纲顶张力为496.来流为线性剪切流,剪切率从0到0.024变化,最大雷诺数为250.研究发现:剪切流作用下柔性立管横流向振动表现为驻波模式,而顺流向振动表现为行波与驻波混合模式.随着剪切率增大,振动频谱呈现多频响应,振动能量逐渐向低频转移.阻力系数平均值随着展向变化,脉动阻力系数和升力系数的均方根值均表现为"双峰"模式.流固能量传递系数沿立管轴向的分布表明,振动激励区集中于高流速区,而振动阻尼区多位于低流速区.剪切率较小时,圆柱的泻涡为平行交叉模式;剪切率较大时,圆柱的泻涡为倾斜泻涡模式,且由于泻涡频率沿立管轴向变化,尾流发生涡裂现象,形成泻涡频率不同的胞格结构.     

柱体流激振动能量俘获理论与技术研究若干进展

潮流能分布广泛,且储量巨大,具备巨大的规模化开发利用价值.流激振动是一种常见的流固耦合现象,通过柱体流激振动能够在流速较低时实现有效的能量转换,基于柱体流激振动的能量俘获技术在未来具备广阔的工程应用前景.近年来,针对柱体结构流激振动特性和能量俘获性能,出现了大量的实验和数值仿真研究工作.文章全面阐述了多种截面形式的单个柱体、柱群结构流激振动能量俘获理论与技术方面的研究进展:对于单个圆柱流激振动能量俘获,目前已基本揭示了被动湍流控制器参数、系统阻尼、雷诺数和边界条件等因素对能量俘获性能的影响规律,基本完成了理论和技术积累;对于非圆截面柱体流激振动能量俘获,已初步明确特定来流攻角、系统质量比、系统阻尼、系统刚度和雷诺数条件下三角形、四边形、多边形与异形等多种截面形式柱体的流激振动作用机理和能量俘获能力;对于柱群的流激振动能量俘获,各柱体振子之间存在流场干涉,需要合理设计柱体排布形式、柱体间距和系统阻尼等参数,实现流体能量俘获最大化.通过综述国内外流激振动能量俘获理论和技术方面的研究进展,对今后该问题的研究进行了力所能及的展望,期望促进流激振动能量俘获理论的发展和流激振动能量转换装置的工程应...     

正弦振荡来流下柔性立管涡激振动发展过程

在风浪流的作用下,海洋浮式结构物将带动悬链线立管在水中作周期性往复运动,从而在立管运动方向上产生相对振荡来流,这种振荡来流将激励立管悬垂段发生“间歇性” 的涡激振动. 在海洋工程水池中对一个4m 长的立管微段进行模型试验研究,以探索相对振荡来流作用下立管涡激振动产生的机理及其发展的物理过程. 试验通过振荡装置带动模型作正弦运动来模拟不同最大约化速度U_Rmax、不同KC（Keulegan-Carpenternumber）的相对振荡来流,利用光纤应变片测量立管涡激振动响应. 结合模态分析方法处理试验数据得到位移响应时历,继而提出相对振荡来流下柔性立管涡激振动发展的3 个阶段:建立阶段、锁定阶段以及衰减阶段. 并进一步总结了最大约化速度U_Rmax,KC 对涡激振动发展过程的影响规律. 最终获得不同最大约化速度U_Rmax下,涡激振动各发展阶段随KC 所占时间分布比例图.      

绒毛控制圆柱涡激振动的风洞试验研究

利用绒毛对圆柱涡激振动抑制进行了风洞试验研究。通过改变附属绒毛无因次长度L/D比(L为绒毛长度,D为圆柱外径),研究L/D分别为0.6、1.2和1.8的模型在约化速度2~40的范围内对弹性支撑大质量阻尼系数圆柱涡激振动的抑制作用。试验采用激光位移传感器采集圆柱的横向(Y)和顺流向(X)位移,并用烟线测流场以揭示流动控制机理。结果表明,三种无因次长度的绒毛对大质量阻尼系数圆柱的涡激振动都有显著的抑制作用,随着L/D的增加,圆柱Y向无因次位移及功率谱密度幅值减弱,多达73.5%的无因次位移被抑制;且随着L/D的增加,圆柱附属绒毛频率比远离原始圆柱频率比。绒毛改变了圆柱的边界层分离点位置、抑制了边界层的相互作用并改变尾涡结构,从而抑制振动。     

水流-圆柱-发电机动力相互作用量纲分析及实验装置

涡激振动能量转换装置涉及水流-圆柱-发电机之间复杂的动力耦合问题。本文从圆柱涡激振动、能量传递、电能转换三个方面对涡激振动能量转换装置的工作机理进行理论分析,提取出相关的影响参数,并应用量纲分析方法对水流、圆柱、发电机三者之间的动力耦合作用进行了分析,确定了实验模拟中应满足一致的相似参数。为了研究不同水流条件下涡激振动能量转换装置的工作特性,设计制作了一套实验装置,并对初步实验结果进行了分析。     

Application of wake oscillators to two-dimensional vortex-induced vibrations of circular cylinders in oscillatory flows

A nonlinear time-domain simulation model for predicting two-dimensional vortex-induced vibration (VIV) of a flexibly mounted circular cylinder in planar and oscillatory flow is presented. This model is based on the utilization of van der Pol wake oscillators, being unconventional since wake oscillators have typically been applied to steady flow VIV predictions. The time-varying relative flow–cylinder velocities and accelerations are accounted for in deriving the coupled hydrodynamic lift, drag and inertia forces leading to the cylinder cross-flow and in-line oscillations. The system fluid–structure interaction equations explicitly contain the time-dependent and hybrid trigonometric terms. Depending on the Keulegan–Carpenter number (KC) incorporating the flow maximum velocity and excitation frequency, the model calibration is performed, entailing a set of empirical coefficients and expressions as a function of KC and mass ratio. Parametric investigations in cases of varying KC, reduced flow velocity, cylinder-to-flow frequency ratio and mass ratio are carried out, capturing some qualitative features of oscillatory flow VIV and exploring the effects of system parameters on response prediction characteristics. The model dependence of hydrodynamic coefficients on the Reynolds number is studied. Discrepancies and limitations versus advantages of the present model with different feasible solution scenarios are illuminated to inform the implementation of wake oscillators as a computationally efficient prediction model for VIV in oscillatory flows.     

Experimental investigation of the flow-induced vibration of a curved cylinder in convex and concave configurations

Experiments have been conducted to investigate the two-degree-of-freedom vortex-induced vibration (VIV) response of a rigid section of a curved circular cylinder with low mass-damping ratio. Two curved configurations, a concave and a convex, were tested regarding the direction of the flow, in addition to a straight cylinder that served as reference. Amplitude and frequency responses are presented versus reduced velocity for a Reynolds number range between 750 and 15 000. Results for the curved cylinders with concave and convex configurations revealed significantly lower vibration amplitudes when compared to the typical VIV response of a straight cylinder. However, the concave cylinder showed relatively higher amplitudes than the convex cylinder which were sustained beyond the typical synchronisation region. We believe this distinct behaviour between the convex and the concave configurations is related to the wake interference taking place in the lower half of the curvature due to perturbations generated in the horizontal section when it is positioned upstream. Particle-image velocimetry (PIV) measurements of the separated flow along the cylinder highlight the effect of curvature on vortex formation and excitation revealing a complex fluid–structure interaction mechanism.     

On shear flow single mode lock-in with both cross-flow and in-line lock-in mechanisms

A long flexible cylinder exposed to ocean currents is known to undergo vortex-induced vibration (VIV). In a spatially sheared flow the response of a riser to VIV can vary from single mode lock-in to multimodal. A new experimental facility was designed and built to investigate the above-mentioned areas. The facility consisted of a long flexible cylinder in either a uniform or a simplified vertically sheared flow. The instrumentation consisted of direct local fluid force measurement at two locations on the cylinder as well as accelerometers spaced along the cylinder axis. The simplified shear flow was a 2-slab flow, with each slab having uniform velocity. Test conditions included forcing the cylinder simultaneously at resonance in both regions to investigate modal competition issues and multimodal response patterns. Resonant VIV excitation of two different modes simultaneously, was conducted which revealed single mode lock-in of the higher frequency through an unexpected mechanism. The higher frequency mode's damping region underwent in-line excitation at four times the predicted shedding frequency that provided a power-in effect to support the dominant mode's cross-flow response.     

近壁面柱体涡激振动的迟滞效应

柱体涡激振动是典型的流固耦合问题,其响应规律标识码在升速流动和远离壁面条件下获得的. 而自然环境流动通常不断经历升速和降速过程,近壁面柱体的涡激振动可呈现与远离标识码体不同的响应特征. 本研究结合大型波流水槽,设计了具有微结构阻尼的柱体涡激振动装置. 基于量纲分析,开展系列水槽标识码验,通过同步测量柱体涡激振动位移时程和绕流流场变化,研究了升降流速作用下柱体涡激振动触发和停振的临界速度(即上临标识码临界速度)变化规律,探究了近壁面柱体涡激振动迟滞效应. 采用自下向上激光扫射的 PIV 流场测量系统,对比分析了固定柱体标识码振动柱体的绕流特征. 实验观测表明,近壁面柱体涡激振动触发的临界速度呈现随壁面间距比减小而逐渐减小的变化趋势;但标识码速条件下的涡激振动停振所对应的下临界速度却明显小于升速时的涡激振动触发所对应的上临界速度. 采用上临界与下临界约标识码差值可定量表征涡激振动迟滞程度,研究发现该值随着柱体间距比减小呈线性增大趋势. 涡激振动迟滞现象通常伴随振幅阶跃标识码阶跃值则随着间距比减小而非线性减小.      

Shear flow induced vibrations of long slender cylinders with a wake oscillator model

A time domain model is presented to study the vibrations of long slender cylinders placed in shear flow. Long slender cylinders such as risers and tension legs are widely used in the field of ocean engineering. They are subjected to vortex-induced vibrations(VIV) when placed within a transverse incident flow. A three dimensional model coupled with wake oscillators is formulated to describe the response of the slender cylinder in cross-flow and in-line directions. The wake oscillators are distributed along the cylinder and the vortex-shedding frequency is derived from the local current velocity. A non-linear fiuid force model is accounted for the coupled effect between cross-flow and in-line vibrations. The comparisons with the published experimental data show that the dynamic features of VIV of long slender cylinder placed in shear flow can be obtained by the proposed model,such as the spanwise average displacement,vibration frequency,dominant mode and the combination of standing and traveling waves. The simulation in a uniform flow is also conducted and the result is compared with the case of nonuniform flow. It is concluded that the flow shear characteristic has significantly changed the cylinder vibration behavior.     

Volumetric reconstruction of the mean flow around circular cylinders fitted with strakes

The volumetric reconstruction technique presented in this paper employs a two-camera stereoscopic particle image velocimetry (SPIV) system in order to reconstruct the mean flow behind a fixed cylinder fitted with helical strakes, which are commonly used to suppress vortex-induced vibrations (VIV). The technique is based on the measurement of velocity fields at equivalent adjacent planes that results in pseudo volumetric fields. The main advantage over proper volumetric techniques is the avoidance of additional equipment and complexity. The averaged velocity fields behind the straked cylinders and the geometrical periodicity of the three-start configuration are used to further simplify the reconstruction process. Two straked cylindrical models with the same pitch (p = 10d) and two different heights (h = 0.1 and 0.2d) are tested. The reconstructed flow shows that the strakes introduce in the wake flow a well-defined wavelength of one-third of the pitch. Measurements of hydrodynamic forces, fluctuating velocity, vortex formation length, and vortex shedding frequency show the interdependence of the wake parameters. The vortex formation length is increased by the strakes, which is an important effect for the suppression of vortex-induced vibrations. The results presented complement previous investigations concerning the effectiveness of strakes as VIV suppressors and provide a basis of comparison to numerical simulations.     

An experimental investigation of one- and two-degree of freedom VIV of cylinders

In the paper,an experiment investigation was conducted for one-and two-degree of freedom vortex-induced vibration(VIV) of a horizontally-oriented cylinder with diameter of 11 cm and length of 120 cm.In the experiment,the spring constants in the cross-flow and in-line flow directions were regulated to change the natural vibration frequency of the model system.It was found that,in the one-degree of freedom VIV experiment,a "double peak" phenomenon was observed in its amplitude within the range of the reduced velocities tested,moreover,a "2T" wake appeared in the vicinity of the second peak.In the two-degree of freedom VIV experiment,the trajectory of cylinder exhibited a reverse "C" shape,i.e.,a "new moon" shape.Through analysis of these data,it appears that,besides the non-dimensional in-line and cross-flow natural vibration frequency ratios,the absolute value of the natural vibration frequency of cylinder is also one of the important parameters affecting its VIV behavior.     

海洋热塑性增强管(RTP)涡激振动数值计算

基于Van der Pol尾流振子模型和多体系统传递矩阵法(transfer matrix method for multibody systems, MSTMM), 建立了可以快速预测海洋热塑性增强管(reinforced thermoplastic pipe, RTP)振动特性和涡激振动响应的动力学模型. 仿真结果与ANSYS软件仿真结果以及文献实验数据对比, 验证了本文模型的准确性. 研究了考虑RTP立管刚性接头, 不同顶张力, 不同来流分布等情况对RTP立管涡激振动响应的影响. 计算结果表明: 流速越大, 立管涡激振动激发出的模态越高; 立管涡激振动主要受低阶模态控制; 立管的刚性接头对立管的湿模态影响较小, 但是对较高阶模态为主所激发出的涡激振动振幅分布影响较大; 剪切流对沿立管轴向的涡激振动振幅分布影响较大, 低流速能量小所引起的涡激振动幅值较小, 但是当剪切流流速达到能激发出较高阶模态时, 相比同等流速的均匀流所引起的涡激振动振幅要大.      

Suppression of vortex-induced vibration of a circular cylinder using suction-based flow control

In the present study, a flow control method is employed to mitigate vortex-induced vibration (VIV) of a circular cylinder by using a suction flow method. The VIV of a circular cylinder was first reproduced in a wind tunnel by using a spring–mass system. The time evolution of the cylinder oscillation and the time histograms of the surface pressures of 119 taps in four sections of the circular cylinder model were measured during the wind tunnel experiments. Four steady suction flow rates were used to investigate the effectiveness of the suction control method to suppress VIV of the circular cylinder. The vibration responses, the mean and fluctuating pressure coefficients, and the resultant aerodynamic force coefficients of the circular cylinder under the suction flow control are analyzed. The measurement results indicate clearly that the steady suction flow control method exhibits excellent control effectiveness and can distinctly suppress the VIV by dramatically reducing the amplitudes of cylinder vibrations, fluctuating pressure coefficients and lift coefficients of the circular cylinder model. By comparing the test cases with different suction flow rates, it is found that there exists an optimal suction flow rate for the maximum VIV control. The cases with higher suction flow rates do not necessarily behave better than those with lower suction flow rates. With the experimental setting used in the present study, the suction flow control method is found to behave better for VIV suppression when the ratio of the suction flow velocity to the oncoming flow velocity is less than one.     

The prediction on in-line vortex-induced vibration of slender marine structures

The in-line (IL) vortex-induced vibration (VIV) that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatures, there is no efficient analytical model for predicting pure IL VIV. In this paper, a wake oscillator model capable of analyzing the IL VIV of slender marine structures has been developed. Two different kinds of van der Pol equations are used to describe the near wake dynamics related to the fluctuating nature of symmetric vortex shedding in the first excitation region and alternate vortex shedding in the second one. Some comparisons are carried out between the present model results and experimental data. It is found that many phenomena observed in experiments could be reproduced by the present wake oscillator model.