Optimization of port injection of n-decanol in a PCCI engine using response surface methodology

This work aims to define the optimum n-decanol fraction in the inlet port and the corresponding engine load for the better emissions and performance characteristics of a partially premixed charged compression ignition (PCCI) engine by response surface methodology (RSM). The numerical model based on multi-linear regression was established using experimental data. For this, the influence of various proportions of n-decanol through intake port including 10%, 20%, 30%, and 40% were experimentally investigated besides the primary injection of neem oil biodiesel in the volumetric ratio of 80% diesel and 20% neem biodiesel, namely NB20. The optimization using RSM is exploited to capitalize the brake thermal efficiency (BTE) and diminish the emissions including oxides of nitrogen (NO_x), carbon monoxide (CO) emission, smoke opacity, and hydrocarbon (HC) emission. The n-decanol fraction in the port injection of 31.43% and the engine load in terms of brake power of 2.950 kW were found to be optimum parameters with the maximum desirability of 0.752. The optimal responses for brake-specific fuel consumption (BSFC), BTE, CO, HC, smoke, and NO_x under these operating conditions were found to be 0.305 kg/kWh, 28.8%, 0.145%, 19.61%, 54.85 ppm, and 837.7 ppm, respectively. Likewise, the correlation coefficient R² values for BSFC, BTE, CO, HC, smoke and NO_x have been found to be 99.85%, 99.95%, 93.58%, 90.32%, 99.97%, and 99.93%, respectively. According to the study's findings, the RSM is a realistic method for calculating and enhancing a diesel engine's emission and performance values operating in PCCI mode and using n-decanol and NB20 as fuels.     

Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology

This study is aimed at investigating the effect of injection system parameters such as injection pressure, injection timing and nozzle tip protrusion on the performance and emission characteristics of a twin cylinder water cooled naturally aspirated CIDI engine. Biodiesel, derived from pongamia seeds through transesterification process, blended with diesel was used as fuel in this work. The experiments were designed using a statistical tool known as Design of Experiments (DoE) based on response surface methodology (RSM). The resultant models of the response surface methodology were helpful to predict the response parameters such as Brake Specific Energy Consumption (BSEC), Brake Thermal Efficiency (BTE), Carbon monoxide (CO), Hydrocarbon (HC), smoke opacity and Nitrogen Oxides (NO_x) and further to identify the significant interactions between the input factors on the responses. The results depicted that the BSEC, CO, HC and smoke opacity were lesser, and BTE and NO_x were higher at 2.5 mm nozzle tip protrusion, 225 bar of injection pressure and at 30° BTDC of injection timing. Optimization of injection system parameters was performed using the desirability approach of the response surface methodology for better performance and lower NO_x emission. An injection pressure of 225 bar, injection timing of 21° BTDC and 2.5 mm nozzle tip protrusion were found to be optimal values for the pongamia biodiesel blended diesel fuel operation in the test engine of 7.5 kW at 1500 rpm.     

Influence of advanced injection timing on the performance and emissions of CI engine fueled with ethanol‐blended diesel fuel

Ethanol has been considered as an alternative fuel for diesel engines. On the other hand, injection timing is a major parameter that sensitively affects the engine performance and emissions. Therefore, in this study, the influence of advanced injection timing on the engine performance and exhaust emissions of a single cylinder, naturally aspirated, four stroke, direct injection diesel engine has been experimentally investigated when using ethanol‐blended diesel fuel from 0 to 15% with an increment of 5%. The original injection timing of the engine is 27° crank angle (CA) before top dead center (BTDC). The tests were conducted at three different injection timings (27, 30 and 33° CA BTDC) for 30 Nm constant load at 1800 rpm. The experimental results showed that brake‐specific energy consumption (BSEC), brake‐specific fuel consumption (BSFC), NO_x and CO₂ emissions increased as brake‐thermal efficiency (BTE), smoke, CO and HC emissions decreased with increasing amount of ethanol in the fuel mixture. Comparing the results with those of original injection timing, NO_x emissions increased and smoke, HC and CO emissions decreased for all test fuels at the advanced injection timings. For BSEC, BSFC and BTE, advanced injection timings gave negative results for all test conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of metal based additive on performance emission and combustion characteristics of diesel engine fuelled with biodiesel

This study investigates the use of ferric chloride (FeCl₃) as a fuel borne catalyst (FBC) for waste cooking palm oil based biodiesel. The metal based additive was added to biodiesel at a dosage of 20 μmol/L. Experiments were conducted to study the effect of ferric chloride added to biodiesel on performance, emission and combustion characteristics of a direct injection diesel engine operated at a constant speed of 1500 rpm at different operating conditions. The results revealed that the FBC added biodiesel resulted in a decreased brake specific fuel consumption (BSFC) of 8.6% while the brake thermal efficiency increased by 6.3%. FBC added biodiesel showed lower nitric oxide (NO) emission and slightly higher carbon dioxide (CO₂) emission as compared to diesel. Carbon monoxide (CO), total hydrocarbon (THC) and smoke emission of FBC added biodiesel decreased by 52.6%, 26.6% and 6.9% respectively compared to biodiesel without FBC at an optimum operating condition of 280 bar injection pressure and 25.5^o bTDC injection timing. Higher cylinder gas pressure, heat release rate and shorter ignition delay period were observed with FBC added biodiesel at these conditions.     

Investigation on a diesel engine fueled with hydrogen-compressed natural gas and Kusum seed biodiesel: Performance,combustion, and emission approach

The objective of the present study is to evaluate the performance, combustion, and emission characteristics of a compression-ignition engine using hydrogen-compressed natural gas (HCNG)-enriched Kusum seed biodiesel blend (KSOBD20). The flow rate of HCNG was set at 5, 10, and 15 liters per minute (lpm), and the injection pressure was varied in the range of 180–240 bar. Brake thermal efficiency (BTE) and brake-specific fuel consumption (BSFC) were improved when HCNG was added to the KSOBD20. Combustion characteristics, namely, cylinder pressure (CP) and net heat release rate (NHRR), were also improved. Emissions of carbon monoxide (CO), hydrocarbons (HC), and smoke were also reduced, with the exception of nitrogen oxides (NO_x). The higher injection pressure (240 bar) had a positive effect on operating characteristics. At an injection pressure of 240 bar, for KSOB20 + 15 lpm HCNG, the highest BTE and the lowest BSFC were found to be 32.09% and 0.227 kg/kWh, respectively. Also, the CP and NHRR were 69.34 bar and 66.04 J/deg. CO, HC, and smoke levels were finally reduced to 0.013%, 47 ppm, and 9%, respectively, with increased NO_x levels of 1623 ppm. For optimum results in terms of engine characteristics, the fuel combination KSOBD20 + 15 lpm HCNG at fuel injection pressure 240 bar is recommended. Thus, HCNG-enriched KSOBD20 can be used as an alternative fuel in diesel engines without requiring any modifications to increase performance and reduce emissions.     

Application of response surface methodology to optimize diesel engine parameters fuelled with pongamia biodiesel/diesel blends

ABSTRACT

In the present scenario, the rate of fossil fuel consumption is very high and increasing rapidly which lead to a further increase in air pollution levels. Due to an increase in pollution level, researchers are striving to discover some cleaner and environment-friendly fuels for the diesel engines. This study was focused on the optimization of the input parameters of the diesel engine running on pongamia biodiesel for improvement in the engine performance. The input parameters selected for optimization were fuel injection pressure, fuel injection timing, pongamia biodiesel blends, and engine load with respect to BTE, BSFC, exhaust gas temperature, and P_max. An experimental analysis was performed according to the response surface methodology technique. The best engine input parameters setting for getting optimum performance was found at fuel injection timing 25 bTDC, fuel injection pressure 226 bar, 40% of pongamia biodiesel blending, at 74% of maximum rated engine load. Experimental and optimized results of the output responses at optimum input parameters were compared and found in the suggested error range.     

Prediction of performance,combustion and emission characteristics of diesel-thermal cracked cashew nut shell liquid blends using artificial neural network

This paper explores the use of artificial neural networks (ANN) to predict performance, combustion and emissions of a single cylinder, four stroke stationary, diesel engine operated by thermal cracked cashew nut shell liquid (TC-CNSL) as the biodiesel blended with diesel. The tests were performed at three different injection timings (21°, 23°, 25°CA bTDC) by changing the thickness of the advance shim. The ANN was used to predict eight different engine-output responses, namely brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), exhaust gas temperature (EGT), carbon monoxide (CO), oxide of nitrogen (NO _x ), hydrocarbon (HC), maximum pressure (P _max) and heat release rate (HRR). Four pertinent engine operating parameters, i.e., injection timing (IT), injection pressure (IP), blend percentage and pecentage load were used as the input parameters for this modeling work. The ANN results show that there is a good correlation between the ANN predicted values and the experimental values for various engine performances, combustion parameters and exhaust emission characteristics. The mean square error value (MSE) is 0.005621 and the regression value of R ² is 0.99316 for training, 0.98812 for validation, 0.9841 for testing while the overall value is 0.99173. Thus the developed ANN model is fairly powerful for predicting the performance, combustion and exhaust emissions of internal combustion engines.     

Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel

The objective of this paper was to study the effects of the injection pressure and injection timing on the combustion and emission characteristics in a single-cylinder common-rail direct injection (CRDI) diesel engine fueled with waste cooking oil (WCO) biodiesel and commercial diesel fuel. The fuel property including fatty acid composition for the biodiesel were measured and compared with those of the conventional diesel fuel. The engine tests were conducted at two injection pressures (80 and 160 MPa) and different injection timings from −25 to 0 crank angle degree (CAD) after top dead center (aTDC) under two different engine loads. The results showed that the indicated specific fuel consumption (ISFC) with respect to the injection timings of the biodiesel was higher than that of the diesel fuel under all experimental conditions. The peak cylinder pressure and the peak heat release rate of the biodiesel were slightly lower, while the ignition delay was slightly longer under all operating conditions. In terms of emissions, the biodiesel had benefits in reduction of smoke, carbon monoxide (CO), hydrocarbon (HC) emissions especially with high fuel injection pressure. The nitrogen oxide (NO_x) emissions of the biodiesel were relatively higher than those of the diesel under all experimental conditions.     

A nonlinear regression based multi-objective optimization of parameters based on experimental data from an IC engine fueled with biodiesel blends

This study reports the results of an experimental investigation of the performance of an IC engine fueled with a Karanja biodiesel blends, followed by multi-objective optimization with respect to engine emissions and fuel economy, in order to determine the optimum biodiesel blend and injection timings complying with Bharat Stage II emission norms. Nonlinear regression has been used to regress the experimentally obtained data to predict the brake thermal efficiency, NO_x, HC and smoke emissions based on injection timing, blend ratio and power output. To acquire the data, experimental studies have been conducted on a single cylinder, constant speed (1500 rpm), direct injection diesel engine under variable load conditions and injection timings for neat diesel and various Karanja biodiesel blends (5%, 10%, 15%, 20%, 50% and 100%). Retarding the injection timing for neat Karanja biodiesel resulted in an improved efficiency and lower HC emissions. A tradeoff relationship between the NO_x and smoke emissions is observed, which makes it difficult to determine the optimum blend ratio. The functional relationship developed between the correlating variables using nonlinear regression is able to predict the performance and emission characteristics with a correlation coefficient (R) in the range of 0.95-0.99 and very low root mean square errors. The outputs obtained using these functions are used to evaluate the multi-objective function of optimization process in the 0-20% blend range. The overall optimum is found to be 13% biodiesel-diesel blend with an injection timing of 24°bTDC, when equal weightage is given to emissions and efficiency.     

Comparative study of biodiesel from Jatropha and orange peel oils as pilot fuels in a dual-fuel engine

The diesel-like properties of biodiesel make it a good alternative for CI engines. In the present work, the scope of biodiesel as a pilot fuel has been studied and compared with diesel. The results show that the use of Jatropha oil methyl ester (JOME) and orange peel oil methyl ester (OPOME) as pilot fuel improves BTE and BSFC of dual-fuel engines compared to diesel as a pilot fuel. The use of JOME and OPOME as a pilot fuel for CNG also decreases the emissions like unburnt hydrocarbons, CO, and smoke. However, NO_X emissions increase at higher load. In contrast, use of biodiesel as pilot fuel improves the performance and emissions characteristics of dual-fuel engines.     

Experimental investigation of the effect of compression ratio and injection pressure in a direct injection diesel engine running on Jatropha methyl ester

Being a fuel of different origin, the standard design parameters of a diesel engine may not be suitable for Jatropha methyl ester (JME). This study targets at finding the effects of the engine design parameters viz. compression ratio (CR) and fuel injection pressure (IP) jointly on the performance with regard to fuel consumption (BSFC), brake thermal efficiency (BTHE) and emissions of CO, CO₂, HC, NO_x and Smoke opacity with JME as fuel. Comparison of performance and emission was done for different values of compression ratio along with injection pressure to find best possible combination for operating engine with JME. It is found that the combined increase of compression ratio and injection pressure increases the BTHE and reduces BSFC while having lower emissions. For small sized direct injection constant speed engines used for agricultural applications (3.5 kW), the optimum combination was found as CR of 18 with IP of 250 bar.     

Assessing idling effects on a compression ignition engine fueled with Jatropha and Palm biodiesel blends

In this study, performance of a diesel engine operated with Jatropha and Palm biodiesel blends at high idling conditions has been evaluated. The result obtained from experiment elucidate that, at all idling modes HC and CO emissions of both blends decreases, however, NO_x emissions increases compared to pure diesel fuel. Jatropha biodiesel has higher viscosity compared to Palm biodiesel, which might have degraded the spray characteristics and caused slightly improper mixing which might have led to slightly incomplete combustion, thus at both idling conditions, Jatropha blends emitted higher CO and HC compared to Palm biodiesels. Compared to diesel fuel, CO emissions were 5.9–9.7%, 17.6–22.6%, 23.5–29%, 2.9–6.4%, 5.9–14.5% and 11.8–17.74% less, HC emissions were 10.3–11.5%, 24.13–30.76%, 34.5–39%, 6.9–7.7%, 26–27% and 31–35% less and NO_x emissions were 8.3–9.5%, 14–15%, 22–25%, 5–7.14%, 10–11.3% and 17–18% more respectively for 5, 10 and 20% blends of Palm and Jatropha biodiesel. Compared to diesel fuel, at high idling conditions brake specific fuel consumption all Palm and Jatropha biodiesel–diesel blends increased. Compared to diesel fuel, BSFC were 1.14–1.35%, 2.28–2.96%, 7.1–8.35%, 2.28–2.69%, 3.98–5.39% and 8.83–9.29% more respectively for 5, 10 and 20% blends of Palm and Jatropha biodiesel.     

Using renewable n-octanol in a non-road diesel engine with some modifications

n-Octanol is a promising biofuel synthesized from biomass with several properties closer to diesel than the more popularly researched n-butanol. This study investigates the effects of injection timing (2°CA advance & retard), EGR (up to 30%) and Oct30 (30% by vol. of n-octanol in diesel) on combustion, performance, and emissions of a DI diesel engine. Results in comparison with diesel indicated Oct30 blend presented an enhanced premixed combustion phasing with higher peaks of pressure and HRR. BSFC was found to be slightly higher for Oct30 blend at all EGR rates. Further, when the injection timing is advanced, the blend produced better BSFC. Oct30 delivered better BTE at all injection timings. NOx and smoke emissions are lower for Oct30 at all conditions. Oct30 could overcome the trade-off between smoke and NOx emissions at a combination of certain EGR and injection timings. It was found that at advanced injection, the reduction in NOx and smoke density was 19.02% and 57.14%, respectively, while BTE increased by 4.6% and BSFC increased by 1.3%. At late injection, a reduction of 50.87% in NOx emissions and 15.87% in smoke density was achieved with a slight drop in BTE by 3.5% and an increase in BSFC by 9.7%.     

A study on the performance and emission of a diesel engine fueled with Jatropha biodiesel oil and its blends

Biodiesel either in neat form or as a mixture with diesel fuel is widely investigated to solve the twin problem of depletion of fossil fuels and environmental degradation. The main objective of the present study is to compare performance, emission and combustion characteristics of biodiesel derived from non edible Jatropha oil in a dual fuel diesel engine with base line results of diesel fuel. The performance parameters evaluated were: brake thermal efficiency, brake specific fuel consumption, power output. As a part of combustion study, in-cylinder pressure, rate of pressure rise and heat release rates were evaluated. The emission parameters such as carbon monoxide, carbon dioxide, un-burnt hydrocarbon, oxides of nitrogen and smoke opacity with the different fuels were also measured and compared with base line results. The different properties of Jatropha oil after transestrification were within acceptable limits of standards as set by many countries. The brake thermal efficiency of Jatropha methyl ester and its blends with diesel were lower than diesel and brake specific energy consumption was found to be higher. However, HC, CO and CO₂ and smoke were found to be lower with Jatropha biodiesel fuel. NO_x emissions on Jatropha biodiesel and its blend were higher than Diesel. The results from the experiments suggest that biodiesel derived from non edible oil like Jatropha could be a good substitute to diesel fuel in diesel engine in the near future as far as decentralized energy production is concerned. In view of comparable engine performance and reduction in most of the engine emissions, it can be concluded and biodiesel derived from Jatropha and its blends could be used in a conventional diesel engine without any modification.     

Inhibition of NO emission by adding antioxidant mixture in <Emphasis Type="Italic">Jatropha</Emphasis> biodiesel on the performance and emission characteristics of a C.I. engine

In this paper, the effect of adding an antioxidant mixture in Jatropha biodiesel as fuel, in a single cylinder, direct injection compression ignition engine was experimentally investigated and the level of pollutants in the exhaust and performance characteristics of the engine were analyzed. Nine test fuels were prepared with three antioxidants, namely, Succinimide (C₄H₅NO₂), N,N-dimethyl-p-phenylenediamine-dihydrochloride (C₈H₁₄Cl₂N₂), and N-phenyl-p-phenylenediamine (C₆H₅NHC₆H₄NH₂) added to neat biodiesel at 500 parts per million (ppm), 1000 ppm and 2000 ppm and the observed experimental results were compared with those of neat biodiesel and neat diesel as base fuels. The comparison showed that NO emission was reduced drastically for the test fuels with the antioxidant addition of 2000 ppm. The maximum reduction of 10% of NO emission was observed for the antioxidant mixture in neat biodiesel, with a slight increase in unburned HC, CO and smoke opacity. In addition, the obtained experimental results reveal that the addition of two antioxidants as mixture in neat biodiesel caused improved NO emission reduction for all test fuels.     

Effect of changing injection pressure on Mahua oil and biodiesel combustion with CeO2 nanoparticle blend on CI engine performance and emission characteristics

Alternative fuels have sparked a lot of interest as oil deposits have decreased and environmental concerns have grown. Biodiesel is an alternative fuel that is being researched as a possible replacement for fossil fuels. In the current investigation, the combustion performance, and emission characteristics of CI(Compression Ignition) engine were examined by changing the fuel injection pressure (180, 200, 220 and 240 bar). The biodiesel (B20) used in this analysis was obtained from Mahua oil at 20% v/v blended with neat diesel (20% Mahua Biodiesel + 80% Diesel). CeO₂(Cerium Oxide) nanoparticles were introduced to the B20 fuel at four distinct concentrations are 25, 50, 75, and 100 ppm. Performance characteristics such as BTE(Brake Thermal Efficiency) and BSFC(Brake Specific Fuel Consumption) were inferior to diesel, at 240 bar B20 with 25 ppm CeO₂ indicated 1.9% increased BTE and 3.8% reduced BSFC compared B20 and 6% lower EGT (Exhaust Gas Temperature) compared diesel. At 200 bar, fuel samples indicated slightly higher In-Cylinder pressure and lower HRR (Heat release rate) compared to diesel. At 200 bar FIP(Fuel Injection Pressure), HC(Hydro Carbon) and CO(Carbon Monoxide) emissions were reduced significantly compared to diesel. The largest reduction in smoke opacity and NOx(Nitrous Oxide) emissions were observed at 240 bar with 75 ppm dosage, but CO₂(Carbon Dioxide) emissions were higher at 220 bar.     

Investigation on emission characteristics of alcohol biodiesel blended diesel engine

The present study analyzes the emission pattern of Decanol combined Jatropha biodiesel (JBD100) fueled diesel engine and compared with conventional diesel fuel (D100). Experiments were conducted in a single-cylinder, 4-stroke naturally aspirated diesel engine with an eddy current dynamometer at a constant speed of 1800 rpm. Modified fuel was prepared using a mechanical agitator, in which the Decanol concentration was varied from 10 to 20% to JBD100. The physicochemical properties of Decanol combined biodiesel are within ASTM limits. JBD100 promotes a lower level of carbon monoxide (CO) hydrocarbon (HC), and smoke emissions with notable increases in NO_x and carbon dioxide (CO₂) emissions. An inclusion of 20% Decanol in JBD100 reduces the NO_x, Smoke, CO, and HC emission by 7.4%, 4.4%, 5.7%, and 5.9%, respectively, under full brake power.     

Performance and emission characteristics of a diesel engine using isobutanol–diesel fuel blends

The aim of this study is to investigate the suitability of isobutanol–diesel fuel blends as an alternative fuel for the diesel engine, and experimentally determine their effects on the engine performance and exhaust emissions, namely break power, break specific fuel consumption (BSFC), break thermal efficiency (BTE) and emissions of CO, HC and NO_x. For this purpose, four different isobutanol–diesel fuel blends containing 5, 10, 15 and 20% isobutanol were prepared in volume basis and tested in a naturally aspirated four stroke direct injection diesel engine at full -load conditions at the speeds between 1200 and 2800 rpm with intervals of 200 rpm. The results obtained with the blends were compared to those with the diesel fuel as baseline. The test results indicate that the break power slightly decreases with the blends containing up to 10% isobutanol, whereas it significantly decreases with the blends containing 15 and 20% isobutanol. There is an increase in the BSFC in proportional to the isobutanol content in the blends. Although diesel fuel yields the highest BTE, the blend containing 10% isobutanol results in a slight improvement in BTE at high engine speeds. The results also reveal that, compared to diesel fuel, CO and NO_x emissions decrease with the use of the blends, while HC emissions increase considerably.     

Effects of oxyhydrogen on the CI engine fueled with the biodiesel blends: A performance,combustion and emission characteristics study

The main purpose of this study is to analyse the effects of oxy hydrogen (HHO) along with the Moringa oleifera biodiesel blend on engine performance, combustion and emission characteristics. HHO gases were generated using the typical electrolysis process using the potassium hydroxide solution. The experiments were performed under various engine loads of 25%, 50%, 75%, and 100% in a constant speed engine. Biodiesel from the M. oleifera was prepared by the transesterification process. Further, the procured biodiesel blends mixed with neat diesel at the concentration of 20% (B20) and 40% (B40). In addition to above, the HHO gas flow rate to the engine chamber maintained at the flow rate of 0.5 L^-1. The use of the 20% and 40% blends with HHO reported less BTE compared to the neat diesel. However, B20 reported marginal rise in the BTE due to the addition of the HHO gas. On the other hand, addition of HHO gas to the blends significantly dropped the brake specific fuel consumption. With regard to the emissions, addition of the biodiesel blends reduced the concentration of the CO, HC, and CO₂. Nevertheless, no reduction reported in the formation of the NO. However, adding the HHO to the biodiesel reduced the average NOx by 6%, which is a substantial effect. Overall, HHO enriching biodiesel blends are the potential replacement for the existing fossil fuels for its superior fuel properties compared to the conventional diesel.     

The emission analysis of an IDI diesel engine fueled with methyl ester of waste frying palm oil and its blends

In this study, the exhaust emissions of an unmodified diesel engine fueled with methyl ester of waste frying palm-oil (biodiesel) and its blends with petroleum based diesel fuel (PBDF) were investigated at the full load-variable speed condition. The relationships between the fuel properties and the air–fuel equivalence ratio, fuel line pressure, start of injection (SOI) timing, and ignition delay were also discussed to explain their effects on the emissions. The obtained test results were compared with the reference values which were determined by using PBDF. The results showed that when biodiesel was used in the test engine, the fuel line pressure increased while air–fuel equivalence ratio and ignition delay decreased. These behaviors affected the combustion phenomena of biodiesel which caused to reduction 57% in carbon monoxide (CO) emission, about 40% in unburned hydrocarbon (HC) emission and about 23% in smoke opacity when compared with PBDF. However, NO_x and CO₂ emissions of the biodiesel have showed different behaviors in terms of the engine speed.