Thermo‐physical properties of n‐pentane/bitumen and n‐hexane/bitumen mixture systems

The gravity drainage as a result of viscosity reduction is the main governing mechanism of the solvent‐aided thermal bitumen recovery processes. Therefore, the density and viscosity of the diluted or heated bitumen are essential to predict the oil production rate. In this paper, we report thermo‐physical properties of n‐pentane/bitumen and n‐hexane/bitumen mixtures. The density and viscosity of Athabasca bitumen diluted with n‐pentane and n‐hexane were measured at different temperatures (30 to 190 °C), pressures (2 to 8 MPa), and solvent mass fractions (0.05 to 0.5). Various correlations and mixing rules proposed in the literature were examined to calculate the density and viscosity of the diluted bitumen. This study proposes appropriate mixing rules and generalized parameters for predicting the density and viscosity of solvent‐bitumen systems. Our findings will find applications in the design and simulation of heavy oil and bitumen solvent‐aided thermal recovery processes.     

n‐butane carbonylation to n‐pentanal using a cascade reaction of dehydrogenation and SILP‐catalyzed hydroformylation

A novel gas‐phase process has been developed that allows direct two‐step conversion of butane into pentanals with high activity and selectivity. The process consists of alkane dehydrogenation over a heterogeneous Cr/Al₂O₃ catalyst followed by direct gas‐phase hydroformylation using advanced supported ionic liquid phase (SILP) catalysis. The latter step uses rhodium complexes modified with the diphosphite ligands biphephos (BP) and benzopinacol to convert the butane/butene mixture from the dehydrogenation step efficiently into aldehydes. The use of the BP ligand results in improved yields of linear pentanal because SILP systems with this ligand are active for both isomerization and hydroformylation. © 2014 American Institute of Chemical Engineers AIChE J, 61: 893–897, 2015     

Searching for health beneficial n‐3 and n‐6 fatty acids in plant seeds

Various plant seeds have received little attention in fatty acid research. Seeds from 30 species mainly of Boraginaceae and Primulaceae were analysed in order to identify potential new sources of the n‐3 PUFA α‐linolenic acid (ALA) and stearidonic acid (SDA) and of the n‐6 PUFA γ‐linolenic acid (GLA). The fatty acid distribution differed enormously between genera of the same family. Echium species (Boraginaceae) contained the highest amount of total n‐3 PUFA (47.1%), predominantly ALA (36.6%) and SDA (10.5%) combined with high GLA (10.2%). Further species of Boraginaceae rich in both SDA and GLA were Omphalodes linifolia (8.4, 17.2%, resp.), Cerinthe minor (7.5, 9.9%, resp.) and Buglossoides purpureocaerulea (6.1, 16.6%, resp.). Alkanna species belonging to Boraginaceae had comparable amounts of ALA (37.3%) and GLA (11.4%) like Echium but lower SDA contents (3.7%). Different genera of Primulaceae (Dodecatheon and Primula) had varying ALA (14.8, 28.8%, resp.) and GLA portions (4.1, 1.5%, resp.), but similar amounts of SDA (4.9, 4.5%, resp.). Cannabis sativa cultivars (Cannabaceae) were rich in linoleic acid (57.1%), but poor in SDA and GLA (0.8, 2.7%, resp.). In conclusion, several of the presented plant seeds contain considerable amounts of n‐3 PUFA and GLA, which could be relevant for nutritional purposes due to their biological function as precursors for eicosanoid synthesis. Practical applications: N‐3 PUFA are important for human health and nutrition. Unfortunately, due to the increasing world population, overfishing of the seas and generally low amounts of n‐3 PUFA in major oil crops, there is a demand for new sources of n‐3 PUFA. One approach involves searching for potential vegetable sources of n‐3 PUFA; especially those rich in ALA and SDA. The conversion of ALA to SDA in humans is dependent on the rate‐limiting Δ6‐desaturation. Plant‐derived SDA is therefore a promising precursor regarding the endogenous synthesis of n‐3 long‐chain PUFA in humans. The present study shows that, in addition to seed oil of Echium, other species of Boraginaceae (Cerinthe, Omphalodes, Lithospermum, Buglossoides) and Primulaceae (Dodecatheon, Primula), generally high in n‐3 PUFA (30–50%), contain considerable amounts of SDA (5–10%). Therefore, these seed oils could be important for nutrition.     

Solution behavior of two novel anionic polyacrylamide copolymers hydrophobically modified with n‐benzyl‐n‐octylacrylamide

Two novel hydrophobically modified anionic polyacrylamides (HM‐PAMs), p(AM/NaA/NaAMC₁₂S/BOAM) and p(AM/NaA/OP‐10‐AC/BOAM) have been prepared by an aqueous micellar copolymerization technique from acrylamide, sodium acrylate (NaA), sodium 2‐(acrylamido)dodecane‐1‐sulfonate (NaAMC₁₂S), octylphenol polyoxyethylene acrylate (OP‐10‐AC), and small amounts of N‐benzyl‐N‐octylacrylamide, respectively, with the objective of investigating the copolymers' rheological behaviors and surface activities under various conditions such as polymer concentration, shear rate, temperature, and salinity. As expected, the copolymers exhibit improved thickening properties due to intermolecular hydrophobic associations as the solution viscosity of the copolymers increases sharply with increasing polymer concentration. A decrease in viscosity is observed with increasing temperature, and the solution viscosity of the copolymers decreases with increasing NaCl concentration. Furthermore, the block copolymers exhibit high air–liquid surface activities as the surface tensions (STs) decrease with increasing polymer concentration. This behavior is yet another evidence of polymolecular micelles formation of the copolymers in aqueous solution, and thus the high tendency to adsorb at an interface. The ST exhibited by the copolymers was found to be relatively insensitive to the concentration of salt (NaCl). Scanning electron micrographs showed large aggregates in solutions, which is formed by the association from the hydrophobic groups of the polymers. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Studies on n‐Butyl Nitroxyethylnitramine (n‐BuNENA): Synthesis,Characterization and Propellant Evaluations

The laboratory synthesis of the energetic plasticizer n‐buNENA was scaled up to one kg batch size and the compound was fully characterized by spectral data and elemental analysis. N‐buNENA was formulated with CMDB and EDB propellant compositions. The results showed an improvement in mechanical properties and burning rate over a wide range of pressure along with acceptable limits of hazard and thermal stability as compared to DEP based propellant systems.     

Occurrence of Hexacosapolyenoic Acids 26:7(n‐3), 26:6(n‐3), 26:6(n‐6) and 26:5(n‐3) in Deep‐Sea Brittle Stars from Near the Kuril Islands

Significant amounts of polyunsaturated fatty acids (PUFA) with a chain length of 26 carbon atoms were detected in lipids of five deep water species of Ophiuroidea besides common fatty acids with chain lengths between 14 and 24. By means of hydrogenation, GC–MS of the methyl esters, and 4,4‐dimethyloxazoline (DMOX) derivatives of these C26 acids were characterized as 5,8,11,14,17,20,23‐hexacosaheptaenoic [26:7(n‐3)]; 8,11,14,17,20,23‐hexacosahexaenoic [26:6(n‐3)]; 5,8,11,14,17,20‐ hexacosahexaenoic [26:6(n‐6)]; and 11,14,17,20,23‐hexacosapentaenoic [26:5(n‐3)]. Concentrations of these acids varied from 0.3 to 4.5 mol% of the total FA. In all the samples investigated, the main component of C26PUFA was hexacosaheptaenoic acid 26:7(n‐3). These C26PUFA are localized mainly in polar lipids. The presence of the possible biosynthesis precursors suggests that the C26PUFA are produced by the brittle stars, and are not accumulated from food sources. This finding can also explain the presence of small amounts of the 26:7(n‐3) acid detected earlier in flesh lipids of the roughscale sole Clidoderma asperrimum, which feeds on deep water brittle stars. We suggest a possible scheme of the biosynthesis of C26 PUFA.     

Dispersion polymerization of n‐butyl acrylate

The dispersion polymerization of n‐butyl acrylate (BA) was investigated using alcohol/water mixtures as the dispersion medium, 4,4′ ‐azobis‐(4‐cyanopentanoic acid) as the initiator, and polyvinylpyrrolidone (PVP) as the stabilizer. The effects of polymerization parameters, such as the alcohol/water ratio in the medium and the type and concentration of the polymeric stabilizer, on the resulting particle size and size distribution were studied. The final particle size and the stability of the dispersion system were found to be greatly influenced by the type of alcohol used in the mixture; that is, methanol or ethanol, even though the apparent solubility parameters are almost the same for the two types of mixtures. Poly(butyl acrylate) particles with controlled size and size distribution (monodisperse), and gel content were successfully prepared in a 90/10 methanol/water medium. It was found that the particle size decreased with increasing initiator concentration. This is the opposite of what was previously reported in the dispersion polymerizations of styrene and methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2692–2709, 2002     

Compatibility studies on polystyrene and poly‐n‐butyl methacrylate

Polystyrene (PS) was a solution blended with poly‐n‐butyl methacrylate (PnBMA) at different compositions and the interactions between the two polymers were studied by using viscometry, ultrasound studies, and mechanical properties. All the properties show a characteristic variation in three stages. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2322–2330, 2002     

Reactive extraction of propionic acid using tri‐n‐octylamine,tri‐n‐butyl phosphate and aliquat 336 in sunflower oil as diluent

BACKGROUND : Propionic acid is widely used in chemical and allied industries and can be produced by biocultivation in a clean and environmentally friendly route. Recovery of the acid from the dilute stream from the bioreactor is an economic problem. Reactive extraction is a promising method of recovering the acid but suffers from toxicity problems of the solvent employed. There is thus a need for a non‐toxic solvent or a combination of less toxic extractants in a non‐toxic diluent that can recover acid efficiently. RESULTS: The effect of different extractants (tri‐n‐butylphosphate (TBP), tri‐n‐octylamine (TOA) and Aliquat 336) and their mixed binary solutions in sunflower oil diluent was studied to find the best extractant‐sunflower oil combination. Equilibrium complexation constant, K_E, values of 4.02, 3.13 and 1.87 m³ kmol^?1 were obtained for propionic acid extraction using Aliquat 336, TOA and TBP, respectively, in sunflower oil. The effect of different modifiers (1‐decanol, methylisobutyl ketone, butyl acetate and dodecanol) on the extraction was also studied and it was found that modifiers enhance extraction, with 1‐decanol found to be the best. CONCLUSION: The problem of toxicity in reactive extraction can be reduced by using a non‐toxic diluent (sunflower oil) or a modifier in a non‐toxic solvent, with the extractant. The addition of modifiers was found to improve the extraction. Copyright © 2008 Society of Chemical Industry     

Cocrystallization behavior of poly(n‐docosyl acrylate) with n‐docosanoic acid by X‐ray and differential scanning calorimetry studies

Cocrystallization behavior of comb‐like poly(n‐docosyl acrylate) (PDA) with n‐docosanoic acid (C₂₂) has been studied by means of differential scanning calorimetry (DSC) and X‐ray diffraction (XRD) methods. The DSC curves of blended samples of neat PDA with C₂₂ show the characteristic melting endotherms that correspond to the melting of the crystallites. DSC measurements of PDA/C₂₂ blends also suggest the existence of another crystalline form induced by the addition of the C₂₂. From the XRD measurements, the existence of hexagonally‐packed crystalline lattice and the phase behavior of PDA/C₂₂ blends at different mole percent are confirmed. Thermal degradation behavior of PDA and its corresponding blends with C₂₂ is studied by thermogravimetric analysis. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2140–2146, 2005     

Equilibrium and Kinetics of the Extraction of Propionic Acid Using Tri‐n‐Octylphosphineoxide

Organophosphorous compounds have been widely used in inorganic analysis for the extraction and separation of inorganic acids or metal species. Since these compounds can form hydrogen bonds to proton donors, they can also be used for the extraction of acidic organic compounds. Therefore, the reactive extraction of propionic acid using tri‐n‐octylphosphine oxide (TOPO) in hexane was studied. Equilibrium and kinetics experiments were performed. The extraction of propionic acid using n‐heptane, light liquid paraffin, heavy liquid paraffin and hexane was studied and hexane was found to be most suitable diluent. The equilibrium complexation constant for the propionic acid‐TOPO complex was determined to be 0.702 m³/kmol. The extraction was found to be first order in propionic acid and first order in TOPO with the overall rate constant as 46.91 (m³/kmol)²/s.     

Thermal characterization of n‐alkyl maleate‐styrene‐allyl propionate terpolymers

Thermal characterization of maleic anhydride‐styrene‐allyl propionate (MA‐St‐AP) terpolymer and its ester derivatives named as n‐alkyl maleate and shown as nPr MA‐St‐AP, nBu MA‐St‐AP, nPn MA‐St‐AP, and nBz MA‐St‐AP was carried out. The thermal characterization was performed using thermal analysis techniques such as TGA, DTA, DSC, and TMA. Different results were observed between the original terpolymer and its ester derivatives. Thermal stabilities of the terpolymer and its ester derivatives were compared by using various measurements plotted as TGA, DTA, DSC, and TMA curves. The increase in the alcohols' carbon numbers added to the original terpolymer results in ester derivatives with different thermal stability behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 600–604, 2007