基于时间反转理论的聚焦Lamb波结构损伤成像

从理论和实验上研究了时间反转法在频散和多模式的Lamb波结构健康检测方面的应用.当Lamb波在包含有损伤的板类结构中传播时,损伤的存在表现为一个被动波源.采用分布式传感器网络,基于传递函数的观点,通过推导由损伤这个被动波源产生的时间反转波场幅值的表达式,证实了当观察点位于损伤位置时,时间反转波场的幅值最大.为验证时间反转方法的聚焦效应,提出了一种适合于分布的激励/接收传感器网络的成像方法,该方法可以对损伤定位并近似确定损伤尺寸.结合有限元的实验结果显示了Lamb波检测信号的能量可在损伤处聚焦,表明时间反转     

离散波长消色差超构透镜的性能分析

在消色差的结构优化中,超构透镜的尺寸、消色差带宽及数值孔径具有内在制约关系,很难获得高效率的大尺寸消色差透镜。离散波长消色差设计将打破宽带消色差的参数制约,有望获得更高效率的成像性能。本文通过引入相位色散空间的概念,理论上阐明了离散波长消色差的效率变化规律,证明了离散波长消色差超构透镜在聚焦效率上优于宽带消色差超构透镜。计算结果表明,双波长消色差超构透镜效率大概为宽带消色差超构透镜的4倍,相关结果通过设计相应的超构透镜进行仿真模拟得到验证。进一步揭示并解释了离散波长消色差的聚焦效率会随消色差的频率间隔增大呈现出先下降后上升的规律。     

高性能近红外聚合物超透镜的逆向设计

传统的光学透镜存在体积较大、聚焦效率低、焦点半峰全宽较大以及在高数值孔径的透镜中性能表现不佳等问题。而光学超表面凭借其自身的亚波长结构,具有强大的操控光相位的能力。相比于传统透镜,超透镜具有尺寸小、厚度薄以及聚焦性能好等优点。本文提出一种基于目标优先算法的逆向设计方法,设计了一种基于低折射率聚合物材料的超透镜结构。其在传播方向上的厚度仅为3.2μm,在1550 nm的工作波长下,数值孔径为0.82,聚焦效率为72%。较传统设计方法而言,该方法具有计算复杂度低和设计效率高等优点。设计的器件可采用高精度微纳打印技术实现批量化的快速制造。考虑到超透镜在制备过程中存在制造容差,进一步讨论了超透镜轮廓偏移以及三维旋转操作对所设计的二维超透镜的影响。     

基于弹性波超表面的Lamb波透射调控

根据广义Snell定律,该文提出了一种新型曲梁型弹性波超表面结构。通过该结构对入射波进行相位调制,实现了板中Lamb波(A0模态)的异常透射调控,从而实现了波的负折射、非对称传输、声聚焦等功能。进一步的研究结果显示,若将该类超表面结构贴置在完整的铝板表面,通过引入吸声材料(阻尼),在保证薄板完整性的同时,可以起到显著消除薄板和超表面透射波场叠加的作用。该方法实现了对完整板结构Lamb波透射方向的有效调控,也为弹性波超表面提供了新的研究思路。     

弯曲型Lamb波传播特性与固井质量相关性研究

轻质水泥在油田固井中的广泛应用使得传统测井方式无法有效的对固井水泥胶结质量做出评价。为了研究新的可行的评价方法,本文采用传递矩阵方法对套管中传播的弯曲型Lamb波进行建模,并通过对所建模型进行数值计算研究了套管外水泥等介质的声学参数变化对弯曲型Lamb波衰减率的影响。数值计算的结果表明,弯曲型Lamb波的衰减率与水泥的声学参数以及水泥与套管的胶结状况有较强相关性,据此可对水泥与套管胶结状况进行评价。本文的计算结果与分析对弯曲型Lamb波在水泥胶结评价中的应用具有一定的参考意义。     

高功率超宽带变压器油透镜天线设计与仿真

将TEM喇叭天线密封进填充变压器油的尼龙天线罩中,只要合理设计尼龙天线罩外形,使变压器油形成聚焦透镜,不仅能提高天线的功率容量,还能改善其辐射特性。基于变压器油的缩波效应和椭球的几何性质,借助几何光学理论,设计了一款具有聚焦能力的椭球变压器油透镜。变压器油的缩波效应能够增大TEM喇叭天线电尺寸,使TEM喇叭天线的辐射特性得到初步改善,透镜的聚焦能力使天线的定向性得到进一步改善。为了验证理论分析的正确性,另外设计了一款不具有聚焦能力的球状变压器油透镜作为参照,两款透镜天线仿真结果与理论分析吻合。与大气中的TEM喇叭天线相比,椭球变压器油透镜使TEM喇叭天线主波束变窄,远场电压峰峰值提高56.97%,阻抗带宽低频端从0.28GHz扩展到0.2GHz,功率容量达到18.43GW。     

铜材料X射线聚焦组合透镜的设计与制作

铜材料X射线聚焦组合透镜是一种基于折射效应的X射线聚焦元件。简单介绍了组合透镜的设计理论研究结果,并据此对材料作了选择。针对铜材料组合透镜,分析了组合透镜结构参数、X射线工作波长的选择对组合透镜光学性能的影响。在此基础上,设计了组合透镜的结构参数,使其在硬X射线波段具有较好的聚焦性能,并能获得较高的焦斑强度。采用准LIGA技术制作了铜材料X射线组合透镜,给出了部分铜材料X射线组合透镜结构测量结果。     

径向偏振光下的长焦、紧聚焦表面等离子体激元透镜

表面等离子体激元透镜(plasmonic lens, PL)是一种通过激发和操控表面等离子体激元 (SPPs), 突破衍射极限, 实现亚波长紧聚焦的纳米光子器件. 如何实现高效率的紧聚焦及调控, 一直是研究PL的重点. 如果选取电矢量沿径向振动的径向偏振光作为PL的入射光, 可从各个方向激发SPPs, 提高紧聚焦的能量效率. 本文提出了一种在径向偏振光激发下的长焦深、长焦距、亚波长紧聚焦的表面等离子体激元透镜, 该透镜由中心T 形微孔、阶梯形同心环和同心环结构组成. 本文首先利用有限元方法数值分析了中心微孔-同心环结构透镜的聚焦特性, 结果显示径向偏振光由底部入射可高效激发SPPs, 并且中心微孔透射光与散射至自由空间的SPPs由于多光束干涉形成了紧聚焦. 为进一步压缩焦斑、增加焦距、加深焦深、改善透镜聚焦特性, 本文引入中心T形微孔-阶梯形同心环结构, 从而对阶梯表面的SPPs同时提供了相位调制和传播方向的控制. 经过参数优化, 该透镜结构实现了光斑焦深、半高宽、焦距分别是入射光波长的2.5倍、0.388 倍、3.22倍的亚波长紧聚焦; 而且该透镜具有结构紧凑、尺寸小、易于集成的优点, 满足了纳米光子学对于器件微型化和高度集成化的要求. 该研究结果在纳米光子集成、近场光学成像与探测、纳米光刻等相关领域具有潜在的应用价值.     

单向声传播结构研究

受到电子二极管整流效应的启发,对单向声传播结构展开了一系列的理论与实验研究：将超晶格结构与非线性声学材料组合构成了可实现声整流效应的声二极管结构;通过将反对称弹性结构引入到复合结构板来产生Lamb波的不对称模式转化,设计了可实现Lamb波单向传播的线性声学结构;基于声子晶体的部分禁带特性,在有限尺度声学系统中设计并实现了单向声学波导结构;设计并实现了由纯板与声栅构成的声单向传播结构,具有小尺寸与高效率的特点,且声波出射角度可调;基于声学梯度材料设计了可在极宽频带内实现不对称声传播的声学结构。     

套管中泄漏弯曲型Lamb波的传播特征

低阻抗水泥固井质量检测是油气田生产亟需解决的问题。套管中传播的最低阶泄漏弯曲型Lamb波(以下简称为A0弯曲型Lamb波)对套管后介质尤其是低阻抗水泥的声学参数和胶结状况具有很高的敏感性。通过建立多层介质模型,从理论上计算了其频散和衰减与套管后介质属性及水泥环第Ⅰ界面胶结状况的关系,并数值模拟了有限尺寸定向辐射探头激发和接收的全波波形。结果表明,在套管后耦合慢速水泥时,A0弯曲型Lamb波的频散曲线存在断点,曲线分为两个分支;A0弯曲型Lamb波的衰减在套管后耦合慢速水泥时最大并且对水泥环第Ⅰ界面胶结差时流体环厚度有很高的灵敏度,利用其衰减可以实现对套管后介质类型、水泥环第Ⅰ界面胶结状况及窜槽厚度的有效判别。      

基于热声相控阵列的声聚焦效应

研究基于热声相控阵列的宽频带声聚焦效应.设计新型热声相位控制单元,通过改变单元的空气温度控制声波波速,实现声波透射与反射相位延迟覆盖2π区间.设计四种不同类型的热声相控阵列聚焦透镜,采用8种或2种热声相位控制单元分别实现了透射与反射声聚焦效应.与其他类型的声聚焦透镜相比,热声相控阵列聚焦透镜具有宽频带、高聚焦性能、设计方案简单等优点.     

基于蜷曲空间结构的近零折射率声聚焦透镜

研究基于蜷曲空间结构的近零折射率声聚焦透镜.根据近零折射率材料的声波方向选择机理,采用蜷曲空间结构为基本单元进行排列,设计具有特定入射与出射界面的几何结构,对透射声波的出射方向进行调控,实现了平面声波与柱面声波的聚焦效应,并深入讨论了透镜内部刚性散射体对声聚焦性能的影响.在此基础上,改变近零折射率透镜的出射界面,可以精确调控声波阵面的形状与方向.该类型透镜具有单一的单元结构、高聚焦性能及高鲁棒性等优点.研究结果为设计新型近零折射率声聚焦透镜提供了理论指导与实验参考,同时也为研究声波阵面的调控提供了新思路.     

Thermoacoustic-reflected focusing lens based on acoustic Bessel-like beam with phase manipulation

We report the realization of broadband reflected acoustic focusing lenses based on thermoacoustic phased arrays of Bessel-like beams, in which the units of phase manipulation are composed of three rigid insulated boundaries and a thermal insulation film in air with different temperatures. Based on these units, we realize a reflected focusing lens which can focus reflected acoustic energy on a line, and its fractional bandwidth can reach about 0.29. In addition, we discuss the influences of the base angle of Bessel-like beam, the number of basic unit, and the variation of unit temperature on focusing performances in details. Furthermore, the reflected focusing lens for the cylindrical acoustic wave based on the Bessel-like beam is also demonstrated. The proposed focusing lens has the advantages of a broad working bandwidth, large focus size,and high robustness, which may provide possibilities for the design and application of acoustic lenses.     

表面等离子体平面金属透镜及其应用

由于衍射极限的存在,传统光学透镜成像分辨率理论上只能达到入射光波长的一半。通过恢复和增强携带物体细部特征信息的高频倏逝波,基于表面等离子体的平面金属透镜有望突破这种光学衍射极限,实现超分辨成像。本文对平面薄膜式与纳米结构式两类平面金属透镜进行了综述,详细介绍了若干典型平面金属透镜的结构设计、工作机理及其聚焦性能,并对其特点与存在的问题进行了分析与讨论。由于光波在金属中传播时存在一定损耗,如何更高效地增强高频倏逝波信号并转换成传播波,使其参与成像,以更好地实现远场超分辨成像,以及如何进一步增大近场超高分辨率聚焦光斑焦深以及减小远场聚焦光斑尺寸,是表面等离子体平面金属透镜进一步研究的重点。     

Focusing and waveguiding of Lamb waves in micro-fabricated piezoelectric phononic plates

This paper presents results on the numerical and experimental studies of focusing and waveguiding of the lowest anti-symmetric Lamb wave in micro-fabricated piezoelectric phononic plates. The phononic structure was based on an AT-cut quartz plate and consisted of a gradient-index phononic crystal (GRIN PC) lens and a linear phononic plate waveguide. The band structures of the square-latticed AT-cut quartz phononic crystal plates with different filling ratios were analyzed using the finite element method. The design of a GRIN PC plate lens which is attached with a linear phononic plate waveguide is proposed. In designing the waveguide, propagation modes in square-latticed PC plates with different waveguide widths were studied and the results were served for the experimental design. In the micro-fabrication, deep reactive ion etching (Deep-RIE) process with a laboratory-made etcher was utilized to fabricate both the GRIN PC plate lens and the linear phononic waveguide on an 80 μm thick AT-cut quartz plate. Interdigital transducers were fabricated directly on the quartz plate to generate the lowest anti-symmetric Lamb waves. A vibro-meter was used to detect the wave fields and the measured results on the focusing and waveguiding of the piezoelectric GRIN PC lens and waveguide are in good accordance with the numerical predictions. The results of this study may serve as a basis for developing an active micro plate lens and related devices.     

高能X射线组合透镜聚焦性能的实验结果

高能X射线组合透镜是一种基于折射效应的新型X射线光学元件。报道了这种新型X射线光学元件聚焦性能的最新实验结果。设计的高能X射线组合透镜为聚甲基丙烯酸甲酯(PMMA)材料,包括40个相同的、顺序排布的平凹折射单元,折射单元的球面半径为200μm,组合透镜的几何口径约为500μm,长度约为8 mm,焦距约为1.3 m。简要描述了PMMA材料X射线组合透镜的制作技术和制作过程。并给出了X射线组合透镜聚焦性能测试实验系统和实验条件。最后给出8 keV单色X射线辐射下,PMMA材料X射线组合透镜的聚焦性能的测试结果,对实际测试结果进行了分析和讨论,得出结论,焦距等参量与理论计算结果基本吻合。     

Optimum Design of Millimeter-Wave Double-Dielectric Fresnel Zone-Plate Lens and Antenna

The microwave/millimeter-wave Fresnel-zone plate (FZP) lenses differ substantially in construction, technology and applications from their optical analogs and require specific design equations and methods of electromagnetic analysis. In this paper, optimum design equations for double-dielectric lossless FZP lens are derived. The best and worst choices of the permittivity ratio for lossless dielectrics are discussed in detail. In addition, the influence of dielectric losses on the lens thickness for given wavelength and permittivities is examined.Two versions of a 57.5-GHz double-dielectric phase-reversal zone plate are used as focusing elements of FZP lens antenna. The antenna co-polar and cross-polar radiation patterns, aperture efficiency and frequency bandwidth are analyzed numerically and contrasted with those of half-blocked FZP and horn lens antennas.     

Large‐aperture prism‐array lens for high‐energy X‐ray focusing

A new prism‐array lens for high‐energy X‐ray focusing has been constructed using an array of different prisms obtained from different parabolic structures by removal of passive parts of material leading to a multiple of 2π phase variation. Under the thin‐lens approximation the phase changes caused by this lens for a plane wave are exactly the same as those caused by a parabolic lens without any additional corrections when they have the same focal length, which will provide good focusing; at the same time, the total transmission and effective aperture of this lens are both larger than those of a compound kinoform lens with the same focal length, geometrical aperture and feature size. This geometry can have a large aperture that is not limited by the feature size of the lens. Prototype nickel lenses with an aperture of 1.77 mm and focal length of 3 m were fabricated by LIGA technology, and were tested using CCD camera and knife‐edge scan method at the X‐ray Imaging and Biomedical Application Beamline BL13W1 at Shanghai Synchrotron Radiation Facility, and provided a focal width of 7.7 µm and a photon flux gain of 14 at an X‐ray energy of 50 keV.     

Compound Fresnel Zone Lens Conformal to Truncated Cone: Antenna Application

A millimeter wave antenna consisting of two Fresnel zone plate lenses, plane and conical, is examined numerically by use of the vector diffraction theory. The lenses are of Wood-Wiltse (double-dielectric) or Soret (half-open) type, and are designed for the frequency of 117 GHz. The lenses are made conformal to a truncated circular cone with a base diameter of 500 mm and a plateau diameter of 250 mm. Designs for two opening semi-angles, 45° and 75° each of them with a particular lens thickness are presented. For the angle of 90° the cone lens becomes a plane ring lens, which in combination with the plateau zone lens forms a plane lens of size equal to the cone base diameter. Illuminated by directive feeds set at a focal distance of 525 mm from the cone apex, the double-dielectric and half-open compound and plane lenses, form three pairs of Fresnel zone lens antennas, the co-polar and cross-polar radiation characteristics of which have been compared numerically. The double-dielectric lens antennas examined are about 5 dB superior in gain to the half-open lens antennas, which has a gain of approximately 45 dBi. Because all lenses are of equal transverse aperture, the corresponding lens antennas exhibit the same −3 dB beamwidth of about 0.33 degrees. The plane zone lens antenna is very thin and simple. Instead, the antenna comprising a 3-D compound Fresnel zone lens is thicker but can be made conformal to a specific surface shape and possesses more levels of design and optimization freedom.     

Kinoform单透镜的硬X射线聚焦性能

Kinoform单透镜可以高效聚焦硬X射线至纳米量级, 在X射线纳米显微学和纳米光谱学领域有着重要的应用前景. 基于衍射光学和傅里叶光学理论, 给出了X射线经由Kinoform单透镜聚焦的物理模型, 基于数值模拟, 研究了不同材料、光子能量、台阶数量和顶点曲率半径对Kinoform单透镜聚焦性能的影响. 结果表明, 孔径为1 mm的Kinoform单透镜对30 keV的X射线聚焦, 可以得到14 nm焦斑、62 μm焦深, 且可实现4个量级的光强增益和大于30%的光强透过率.