Comparison between MeV Ni and He ion-implanted planar optical waveguides in quartz

Optically polished crystalline quartz samples were implanted at room temperature by 2.6 MeV Ni⁺ ions with a dose of 9×10¹⁴ ions/cm² and 2.0 MeV He⁺ ions with a dose of 1.5×10¹⁶ ions/cm², respectively. A comparison of the MeV Ni⁺ ion-implanted planar waveguide formation was made with the MeV He⁺ ion-implanted one. The prism-coupling method was carried out to measure the dark modes in the quartz waveguides by using model 2010 prism coupler. Five modes were observed in the Ni⁺ implanted waveguide while 15 modes were found in the He⁺ ion-implanted one. Reflectivity calculation method was applied to fitting the refractive index profile. TRIM’98 (transport of ions in matter) code was used to simulate the damage profile in quartz by MeV Ni⁺ and He⁺ ions implantation, respectively. It is found that the refractive index profile in MeV Ni⁺ ions implanted waveguide is somewhat different in shape from that in MeV He⁺ ions implanted waveguide.     

Planar waveguides in neodymium-doped calcium niobium gallium garnet crystals produced by proton implantation

In this work, the fabrication and optical properties of a planar waveguide in a neodymium-doped calcium niobium gallium garnet(Nd:CNGG) crystal are reported. The waveguide is produced by proton(H~+) implantation at 480 ke V and a fluence of 1.0×10~(17) ions/cm~2. The prism-coupling measurement is performed to obtain the dark mode of the waveguide at a wavelength of 632.8nm. The reflectivity calculation method(RCM) is used to reconstruct the refractive index profile. The finite-difference beam propagation method(FD-BPM) is employed to calculate the guided mode profile of the waveguide.The stopping and range of ions in matter 2010(SRIM 2010) code is used to simulate the damage profile induced by the ion implantation. The experimental and theoretical results indicate that the waveguide can confine the light propagation.     

氦、氘对纯铁辐照缺陷的影响

在核聚变堆的辐照环境中, 核嬗变产物氢、氦对结构材料的抗辐照性能将产生很大的影响. 本实验采用离子注入和电子辐照模拟研究了氦和氘对具有体心立方结构的纯铁的影响. 采用离子加速器在室温分别对纯铁注入氦离子和氘离子, 经500℃时效1 h后在高压电镜下进行电子辐照.结果表明: 室温注氦和室温注氘的纯铁在500℃时效后分别形成间隙型位错环和空位型位错环. 在电子辐照下, 间隙型位错环吸收间隙原子而不断长大, 而空位型位错环吸收间隙原子不断缩小. 通过计算位错环的变化速率发现, 空位型位错环比间隙型位错环吸收了更多的间隙原子, 即室温注氘纯铁的位错偏压比室温注氦纯铁的偏压参量大, 这意味着相同实验条件下空位型位错环对辐照肿胀的贡献大于间隙型位错环对辐照肿胀的贡献. 利用氦-空位复合体和氘-空位复合体的结构, 分析了注氦和注氘后在纯铁中形成不同类型位错环的原因. 关键词： 氦 氘 辐照损伤 位错环     

Visible and near-infrared optical properties of Nd:CLNGG crystal waveguides formed by proton implantation

A Nd:CLNGG waveguide structure operated at wavelengths of both 632.8 nm and 1539 nm was demonstrated for the first time to our knowledge, which was produced by the 480-keV H~+ion implantation with a dose of 1.0×10~(17)protons/cm~2.Its propagating modes at 632.8 nm and 1539 nm were measured by the well-known prism coupling technique. The refractive index profile at either 632.8-nm wavelength or 1539-nm wavelength was optical barrier type in the proton-implanted Nd:CLNGG crystal optical waveguide, which was calculated by using the reflectivity calculation method. The near-field light intensity distributions were also simulated by the finite-difference beam propagation method in the visible and nearinfrared bands.     

Characterization of optical waveguides in β-BaB2O4 crystals formed by 3.0 MeV Ni ions implantation

We report on the optical planar waveguides formation and modal characterization in β-BaB₂O₄ crystals by Ni²⁺ ion implantation at energy of 3.0 MeV and doses of 10¹⁴ ions/cm². The prism coupling method was used to investigate the dark-mode property at wavelengths of 633 nm and 1539 nm, respectively. The refractive index profiles of the waveguides with different doses were reconstructed by an effective refractive index method based on the reflectivity calculation method (RCM). The modal analysis indicates that the fields of TM modes can be well restricted in the guiding region, which means the formation of non-leaky waveguide in the crystal.     

Double optical waveguide in Cu-doped KNSBN crystal formed by MeV boron ion implantation

We reported for what is to be believed the first time a double optical waveguide in a Cu-doped potassium sodium strontium barium niobate (KNSBN) crystal formed by double boron ion implantation. The energy and dose of B⁺ and B³⁺ ions were (3+6) MeV and (2+2)×10¹⁴ ions/cm², respectively. The refractive index profile of the waveguide showed a double-barrier confined shape, which suggested the formation of a two-layer waveguide structure. The two waveguide layers were with thickness of 2.6 and 2 μm, respectively, which was in a good agreement with the parameters obtained from transport and range of ions in matter 98 (TRIM) code simulation. The nuclear energy loss distribution of the MeV B ions implanted into this crystal had a similar shape to that of the waveguide index profile, which means an inherent relationship between the waveguide formation and the energetic energy deposition.     

氦氢离子协同注入对锆膜形貌及物相结构的影响

 采用磁控溅射法制备了Zr-Mo膜，随后在低能静电加速器上分别采用剂量为2.80×10¹⁷~1.12 ×10¹⁸ions·cm^-2的He⁺、H⁺离子辐照Zr-Mo膜，利用光学透镜、扫描电镜、原子力显微镜和X射线衍射研究He⁺、H⁺离子协同注入效应对Zr-Mo膜微观结构的影响。实验结果表明：原始Zr-Mo膜表层晶粒清晰可见，尺寸约为200nm；辐照效应可导致Zr-Mo膜表层产生微观损伤区域，在注He⁺基础上注H⁺导致Zr-Mo膜出现更为严重的损伤现象；离子注入的表面溅射效应可使膜面晶粒边界逐渐刻蚀退让，导致膜面更加光滑、细致；He⁺、H⁺ 离子协同注入可使Zr-Mo膜晶格发生畸变，注入期间未使Zr-Mo膜发生吸H相变生成氢化物。     

Ohmic and Schottky contacts of hydrogenated and oxygenated boron-doped single-crystal diamond with hill-like polycrystalline grains

Hill-like polycrystalline diamond grains(HPDGs) randomly emerged on a heavy boron-doped p~+ single-crystal diamond(SCD) film by prolonging the growth duration of the chemical vapor deposition process.The Raman spectral results confirm that a relatively higher boron concentration(～1.1 × 10~(21) cm~(-3)) is detected on the HPDG with respect to the SCD region(～5.4 × 10~(20) cm~(-3)).It demonstrates that the Au/SCD interface can be modulated from ohmic to Schottky contact by varying the surface from hydrogen to oxygen termination.The current-voltage curve between two HPDGs is nearly linear with either oxygen or hydrogen termination,which means that the HPDGs provide a leakage path to form an ohmic contact.There are obvious rectification characteristics between oxygen-terminated HPDGs and SCD based on the difference in boron doping levels in those regions.The results reveal that the highly boron-doped HPDGs grown in SCD can be adopted as ohmic electrodes for Hall measurement and electronic devices.     

Y3+和Gd3+对LaBO3:Eu3+发光粉结构和发光性能的影响

采用溶胶凝胶-燃烧法合成了系列不同掺杂浓度Y³⁺和Gd³⁺的LaBO₃∶Eu³⁺发光粉,对其结构、形貌和发光性能进行了表征。XRD研究结果表明：发光粉的结构与基质掺杂离子的种类和掺杂浓度有关系。荧光光谱结果表明：适量比例Y³⁺和Gd³⁺离子掺杂将提高LaBO₃∶Eu³⁺发光粉的发光强度。Y³⁺和Gd³⁺离子最佳掺杂摩尔分数分别为1.5%和12.5%。⁵D₀→⁷F₂与⁵D₀→⁷F₁跃迁发射的相对强度比值说明：掺杂改变LaBO₃∶Eu³⁺中Eu³⁺局域环境的对称性。发光性能改变主要受晶体结构、掺杂离子电负性影响。Gd³⁺离子掺杂更有利于发光粉结构稳定性和发光性能的改善。     

The BCC to FCC/HCP phase transformation of the Co70Fe30 alloy produced by ion irradiation of Co70Fe30/Cu discontinuous multilayers

We report on the BCC to FCC/HCP structural transformation of Co₇₀Fe₃₀ alloy produced by room temperature ion irradiation of Co₇₀Fe₃₀/Cu discontinuous multilayers. The structural changes were analyzed by X-ray diffraction and X-ray absorption spectroscopy. For this study, two different samples were examined, one irradiated with 50 keV He⁺ and another with 600 keV Kr⁺ with doses of 1×10¹⁷ and 3×10¹⁵ ions/cm², respectively. No substantial change is observed after He⁺ irradiation, while after Kr⁺ irradiation an unexpected structural transition from BCC to FCC/HCP closed packed of the Co₇₀Fe₃₀ alloy was found.     

Second harmonic generation from precise diamond blade diced ridge waveguides

Carbon ion irradiation and precise diamond blade dicing are applied to fabricate Nd:GdCOB ridge waveguides. The propagation properties of the fabricated Nd:GdCOB waveguides are investigated through experiments and theoretical analysis. Micro-Raman analysis reveals that the Nd:GdCOB crystal lattice expands during the irradiation process. Micro-second harmonic spectroscopic analysis suggests that the original nonlinear properties of the Nd:GdCOB crystal are greatly enhanced within the waveguide volume. Under pulsed 1064 nm laser pumping, second harmonic generation (SHG) at 532 nm has been achieved in the fabricated waveguides. The maximum SHG conversion efficiencies are determined to be ～ 8.32 %·W^-1 and ～ 22.36 %·W^-1 for planar and ridge waveguides, respectively.     

调幅W(Mo)/Cu纳米多层膜He+离子辐照响应行为

用磁控溅射技术制备不同调幅波长 (L) 的W(Mo)/Cu纳米多层膜,所制膜系在60 keV氦离子 (He⁺) 辐照条件下注入不同剂量: 0, 1×10¹⁷ He⁺/cm², 5×10¹⁷ He⁺/cm². 用X射线衍射仪 (XRD) 和高分辨透射电子显微镜(TEM)表征W(Mo)/Cu纳米多层膜辐照前后微观结构. 研究结果表明: 1) He⁺离子轰击引起温升效应是导致沉积态亚稳相β-W 转变成稳态 α-W相的主因, 而与调幅波长无明确关联; 2) 纳米多层结构中W(Mo) 和Cu膜显现出的辐照耐受性与调幅波长相关, 调幅波长越小, 抗He⁺的辐照性能越强; 3) 在5×10¹⁷ He⁺/cm²注入条件下, 观察到He团簇/泡在纳米结构W(Mo) 和Cu膜中的积聚行为存在明显差异: 在W (Mo) 膜中He团簇/泡的分布与晶粒取向相关, He团簇/泡倾向于沿W (211) 晶面分布; 而Cu膜非晶化且He团簇/泡在其体内呈均匀分布. 关键词： W(Mo)/Cu纳米多层膜 +辐照')" href="#">He⁺辐照 He团簇/泡 相转变     

In-situ TEM observation of the evolution of helium bubbles in Mo during He+ irradiation and post-irradiation annealing

The evolution of helium bubbles in purity Mo was investigated by in-situ transmission electron microscopy (TEM) during 30 keV He⁺ irradiation (at 673 K and 1173 K) and post-irradiation annealing (after 30 keV He⁺ irradiation with the fluence of 5.74×10¹⁶ He⁺/cm² at 673 K). Both He⁺ irradiation and subsequently annealing induced the initiation, aggregation, and growth of helium bubbles. Temperature had a significant effect on the initiation and evolution of helium bubbles. The higher the irradiation temperature was, the larger the bubble size at the same irradiation fluence would be. At 1173 K irradiation, helium bubbles nucleated and grew preferentially at grain boundaries and showed super large size, which would induce the formation of microcracks. At the same time, the geometry of helium bubbles changed from sphericity to polyhedron. The polyhedral bubbles preferred to grow in the shape bounded by {100} planes. After statistical analysis of the characteristic parameters of helium bubbles, the functions between the average size, number density of helium bubbles, swelling rate and irradiation damage were obtained. Meanwhile, an empirical formula for calculating the size of helium bubbles during the annealing was also provided.     

非线性一维光子晶体波导光双稳

利用非线性折射率系数较大且非线性时间响应较快的CdS_xSe_1-x玻璃为材料,设计并制备了非线性一维光子晶体波导光双稳器件,该器件的折射率空间分布呈正弦形式。实验测得双稳开关的阈值功率密度为1.60×10⁵W/cm²,开关时间为63ps。采用时域有限差分方法讨论了光子晶体带隙随入射光强变化而移动的情况,随着入射光功率密度的增加,光子晶体的带隙中心向短波方向移动。同时计算了该器件的双稳特性,理论计算得到双稳开关的阈值功率密度为1.40×10⁵W/cm²,开关时间约为50ps。获得了理论与实验基本一致的结果。     

BaMgF_4:Er~(3+),Yb~(3+)上转换纳米晶的合成及其发光性能研究

采用反向共沉淀法制备了形貌呈棒状的BaMgF4:Er3+,Yb3+上转换纳米晶.样品在980 nm半导体激光器激发下发射绿色和红色上转换荧光,其发射的绿、红发射带归因于Er3+离子的2H11/2—4I15/2,4S3/2—4I15/2和4F9/2—4I15/2跃迁.当Er3+的掺杂浓度为3%,Yb3+离子掺杂浓度为10%时,荧光粉的上转换发光强度最强;随着Yb3+离子浓度的增加样品的红光发射增强,绿光发射减弱.通过上转换发光强度与抽运电流关系曲线的拟合,得出BaMgF4:Er3+,Yb3+上转换材料的绿光与红光的上转换过程均为双光子吸收过程.     

掺Er3+碲酸盐玻璃的光谱性质与Judd-Ofelt理论分析

用高温熔融法制备了碲酸盐玻璃(70TeO₂-9B₂O₃-6Nb₂O₅-5Na₂O-10ZnO-1%(质量分数)Er₂O₃)样品。测试了玻璃样品的吸收光谱和荧光光谱。应用Judd-Ofelt理论计算了Er³⁺离子的谱线强度、自发辐射跃迁几率、荧光分支比、辐射寿命等光谱参数,并拟合了相应的强度参数Ω_t(t=2,4,6)(Ω₂=8.01×10^-20cm²,Ω₄=2.09×10^-20cm²,Ω₆=1.15×10^-20cm²)。结果发现该碲酸盐玻璃具有较大的Ω₂值,说明Er—O键的共价性强于它在硅酸盐、锗酸盐、氟化物、铋酸盐和磷酸盐玻璃中的共价性。Er³⁺在碲酸盐玻璃中⁴I_13/2→⁴I_15/2跃迁几率约为492s^-1,表明Er³⁺可能有较强的1.5μm发射。分析了Er³⁺在碲酸盐玻璃中能级⁴I_13/2→⁴I_15/2发射的荧光半峰全宽(FWHM=73nm),并应用McCumber理论计算了Er³⁺的受激发射截面(σ_e=1.08×10^-20cm²),发现其FWHM×σ_e远大于Er³⁺在铋酸盐、磷酸盐、锗酸盐和硅酸盐玻璃中的受激发射截面,说明碲酸盐玻璃是一种制备宽带光纤放大器的优良基质材料。     

Nd L-shell x-ray emission induced by light ions

The L-shell x-ray of Nd has been obtained for 300-600 keV He²⁺ ions impacting, and compared with that produced by H⁺ and H₂⁺ ions. The threshold of projectile kinetic energy for L-shell ionization of Nd is crudely verified in the energy region of about 300-400 keV. It is found that the energy of the distinct L-subshell x-rays has a blue shift. The relative intensity ratios of Lβ_{1, 3, 4} and Lβ_{2, 15} to Lα_{1, 2} x-ray are enlarged compared to the atomic data, and they decrease with the increase of the incident energy, and increase with increasing the effective nuclear charge of the incident ions. That is interpreted by the multiple ionization of outer-shells induced by light ions.     

Local microstructural analysis for Y_2O_3/Eu~(3+)/Mg~(2+) nanorods by Raman and photoluminescence spectra under high pressure

In this paper, we investigate the Raman and photoluminescence spectra of Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods under high pressures using 514-nm and 532-nm laser light excitation. We observe transitions from the initial cubic phase to amorphous at pressures higher than 24 GPa for both Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods. In addition, Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods exhibit different distorted states after the pressure has been raised to 8 GPa. The analyses of intensity ratios, I_(0-2)/I_(0-1) from ~5D_(0–)~7F2_to~5D_(0–)~7F_1and I_(0-2)A/B of ~5D_(0–)7F_2 transitions indicate that Y_2O_3/Eu~(3+)/Mg~(2+) nanorods exhibit stronger local micro-surrounding characteristics for Eu~(3+) ions in a pressuremodulated crystal field. The doped Mg2+ion results in reducing the crystal ionicity in the distorted lattice state under high pressures. The use of doped ions as an ion modifier can be applied to the study of small local microstructural changes through Eu~(3+) luminescence.     

Er3+/Yb3+共掺NaYF4/LiYF4微米晶体的上转换荧光特性

采用水热法成功制备了Er³⁺/Yb³⁺共掺杂的NaYF₄和LiYF₄微米晶体. 通过X射线衍射仪和环境扫描电子显微镜对样品的晶体结构及形貌进行表征. 实验结果表明: 六方相NaYF₄微米晶体为棒状结构, 而四方相LiYF₄微米晶体则为八面体结构. 在近红外光980 nm激发下, NaYF₄:Yb³⁺/Er³⁺和LiYF₄:Yb³⁺/Er³⁺ 微米晶体均展现出很强上转换荧光发射. 且NaYF₄:Yb³⁺/Er³⁺微米晶体的荧光发射强度大约是LiYF₄:Yb³⁺/Er³⁺微米晶体的2倍, 但红绿比明显较低. 根据荧光光谱, 并借助激光光谱学及发光动力学深入探讨基质变化及表面修饰剂乙二胺四乙二酸(EDTA)对荧光特性的影响. 实验结果发现: 影响荧光强度的主要因素是基质环境的局域对称性, 而导致不同红绿比则是由于样品表面较多的EDTA分子所引起. Er³⁺掺杂的NaYF₄和LiYF₄ 微米晶体呈现出很强的绿光发射可被应用于全色显示, 荧光粉和微光电子器件中.     

稀土掺杂的NaGdF4上转换发光材料的合成与发光特性研究

采用水热法制备了一系列不同掺杂浓度的NaGdF₄:Re(Re=Tm³⁺,Er³⁺,Yb³⁺)上转换发光粉。通过X射线衍射(XRD)、电子扫描电镜(SEM)和上转换发射光谱对样品进行了表征。XRD研究结果表明:合成的样品均为六方结构NaGdF₄。估算的平均晶粒尺寸为41~43 nm。在980 nm红外光激发下,Er³⁺和Yb³⁺共掺杂的NaGdF₄发光粉发出分别来自于Er³⁺离子²H_{11/ 2},⁴S_3/2→⁴I_15/2跃迁的绿光和⁴F_9/2→⁴I_15/2跃迁的红光发射,Tm³⁺和Yb³⁺共掺杂的NaGdF₄发光粉发出分别来自Tm³⁺离子的¹G₄→³H₆跃迁的蓝光、¹G₄→³F₄和³F_2,3→³H₆跃迁的红光和³H₄→³H₆跃迁的近红外光发射。Er³⁺,Tm³⁺和Yb³⁺共掺杂的NaGdF₄发光粉的发光强度及红、绿、蓝光发射的相对强度受Yb³⁺离子掺杂浓度的影响。对样品中可能的上转换发光机制进行了讨论。计算的色坐标显示:可通过改变掺杂离子浓度对上转换发光的颜色进行调控。