60°三角翼前缘涡破裂及其控制实验研究

本文应用流动显示技术对矢量差动喷流情况下60°三角翼前缘涡破裂特性进行了实验研究,结果表明矢量差动喷流可以有效地控制前缘涡的破裂位置,且整个流场主要受喷流速度大的喷流的影响,该侧前缘涡的破裂位置随喷流速度的增大向下游发展,而另一侧前缘涡的破裂则提前发生;另外,在喷流速度差一定的情况下,喷流速度越小,对前缘涡的控制作用越明显．     

雷诺数三角翼绕流的影响

应用梁色液流动显示技术研究了雷诺数对６０°尖前缘三角翼前缘涡破裂位置、背风面流动结构等的影响，并详细分析了前风面流动随攻角的变化。     

俯抑振荡三角翼前缘涡破碎的流动显示

前缘后掠角为６５°和７０°的两个平板三角翼作俯仰振荡运动１，前缘涡破碎的流动显示实验研究在南京航空航天大学１米低速风洞中进行。俯仰振荡运动的攻角范围为０°－６０°，折合频率为０．０３和０．０６。采用四氯化钛发烟技术显示前缘涡核轨迹及涡破碎位置。     

基于雨燕翅膀的仿生三角翼气动特性计算研究

针对低雷诺数微型飞行器的气动布局, 设计出类似雨燕翅膀的一组具有不同前缘钝度的中等后掠($\varLambda =50^{\circ}$)仿生三角翼. 为了定量对比研究三角翼后缘收缩产生的气动效应, 设计了一组具有同等后掠的普通三角翼. 为了深入研究仿生三角翼布局的前缘涡演化特性以及总体气动特性, 采用数值模拟方法详细地探索了低雷诺数($Re=1.58\times 10^{4})$流动条件下前缘涡涡流结构和气动力随迎角的变化规律. 分析结果表明, 前缘钝度和后缘收缩对仿生三角翼前缘涡的涡流强度和涡破裂位置有显著影响. 相对于钝前缘来说, 尖前缘使仿生三角翼上下表面的压力差增大, 涡流强度也更大, 增升作用也更显著. 相对于普通三角翼构型, 仿生三角翼的前缘斜切使其阻力更大, 但后缘的收缩使涡破裂位置固定在此位置, 因此整个上翼面保持低压, 总的升力更大. 由于小迎角时升力增大更明显, 因此仿生三角翼的气动效率在小迎角时明显大于普通三角翼. 这些结论对于揭示鸟类的飞行机理以及未来微型仿生飞行器的气动布局设计具有重要的研究价值.      

雷诺数对三角翼绕流的影响

应用染色液流动显示技术研究了雷诺数对６０°尖前缘三角翼前缘涡破裂位置、背风面流动结构等的影响，并详细分析了背风面流动随攻角的变化．     

三角翼动态大迎角气动力特性数值分析研究

采用数值计算方法,对三角翼从 0°上仰至 90°的动态流场和气动力特性进行了计算,并对俯仰角速度对三角翼流场和气动力特性的影响进行了计算分析。给出了三角翼纵向动态情况下的气动力系数变化,特别是大迎角横侧力矩系数的变化特征。结果表明,随着机翼俯仰角速度的提高,前缘分离涡破裂位置相对滞后,机翼升力和阻力系数明显增加,机翼抵抗旋涡非对称破裂的能力明显增强。     

俯仰振荡三角翼前缘涡破碎的流动显示

前缘后掠角为６５°和７０°的两个平板三角翼作俯仰振荡运动，前缘涡破碎的流动显示实验研究在南京航空航天大学１米低速风洞中进行。俯仰振荡运动的攻角范围为０°～６０°，折合频率为０．０３和０．０６。采用四氯化钛发烟技术显示前缘涡核轨迹及涡破碎位置。流动显示图形采用相位锁定照相记录。实验结果表明大幅俯仰振荡三角翼的动态涡破碎的弦向位置明显滞后于相应攻角下的静态位置，此滞后量随折合频率增加而增大。本文也根据测得的涡破碎位置随攻角变化曲线讨论了涡破碎位置的传播速度     

底部喷流及后掠翼前缘涡破碎的流动显示研究

本文介绍了在中国科技大学立式水洞中进行的底部喷流流动显示及底压测量实验以及对x型翼体组合体弹翼上前缘涡破碎的观察,系统地比较了有、无喷流及有、无尾罩下各种底部流态,为工程应用提供了实验依据.     

矢量喷流对细长体大迎角非对称流动影响研究

采用测压方法研究了矢量喷流对细长旋成体大迎角非对称流动的影响特性.实验结果表明:矢量喷流对细长旋成体大迎角非对称侧向力有明显的抑制作用,该抑制作用是通过喷流诱导作用,改变其空间绕流涡系结构的分布来实现的,但是矢量喷流的存在并不能改变大迎角机身空间绕流涡系的本质结构;随着迎角的增大,矢量喷流对细长旋成体大迎角非对称流动的影响区域不断前移,甚至影响到头部;随着喷流落压比的增加,矢量喷流对细长旋成体大迎角非对称侧向力的抑制作用加强,但当喷流落压比达到临界落压比后(即喷管出口处达到设计马赫数时),喷流影响作用将不会随喷流落压比的增加而改变.     

三角翼的双襟翼控涡作用的数值模拟研究

对装有“前端襟翼”和“前缘襟翼”的７４°后掠三角翼的不可压缩流场作了数值模拟,以研究襟翼的旋涡控制作用．数值模拟是用拟压缩性方法求解一般曲线坐标系下的三维不可压缩Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程,时间离散用向后Ｅｕｌｅｒ差分,空间无粘项的离散用二阶迎风ＴＶＤ格式,所得的离散方程用对角化形式的近似隐式因子分解格式求解．湍流模型用Ｂａｌｄｗｉｎ－Ｌｏｍａｘ代数模式．计算了三种平面形状的机翼在迎角范围为１０°～５０°的绕流和气动特性．计算和实验的比较表明,襟翼向下偏转可以推迟旋涡破裂,且对提高机翼的减阻能力、升阻比和改善失速前后的气动特性有明显效果,双襟翼具有更佳的控涡效果．     

Effects of a vectored trailing edge jet on delta wing vortex breakdown

Flow visualization was used to study the effects of a vectored trailing edge jet on the leading edge vortex breakdown of a 65° delta wing. The experimental results indicated that there is little effect of the jet on the leading edge vortex breakdown when the angle of the vectored jet is less than 10°. With the increase of the vectored angle ß, the effect of the jet on the flow becomes stronger, i.e., the jet delays the leading edge vortex breakdown in the direction of the vectored jet, and accelerates breakdown of the other leading edge vortex. Moreover, the effect of the jet control tends to be weaker with the angle of attack.     

The visualization of the flowfield about a delta wing with spanwise blowing

This paper describes a nonintrusive method for the visualization of the flow about a delta wing with spanwise blowing jets, based on the schlieren technique. The effects of the jet/leading-edge vortex interference are visualized by using both air and helium for the jets. The visualization of the leading-edge vortex trajectories and their breakdown, as well as the influence of the jets on them is achieved by spanwise blowing of air. The visualization of the jets' paths and the effects of the leading-edge vortices on these paths is achieved by spanwise blowing of helium.     

三角翼大迎角流场结构和气动力特性的数值分析研究

采用数值计算方法对亚音速三角翼纵向及带有小侧滑情况下的流场结构和气动力特性进行了计算。文中给出了三角翼大迎角纵向情况下气动力、机翼前缘分离涡轴线位置和旋涡破裂位置随迎角的变化规律，以及带有横侧小扰动和小侧滑情况下流场结构的非对称性对气动力的影响。计算结果表明与实验结果符合较好。     

Computation of field structure and aerodynamic characteristics of delta wings at high angles of attack

A numerical investigation of the structure of the vortical flowfield over delta wings at high angles of attack in longitudinal and with small sideslip angle is presented. Three-dimensional Navier-Stokes numerical simulations were carried out to predict the complex leeward-side flowfield characteristics that are dominated by the effect of the breakdown of the leading-edge vortices. The methods that analyze the flowfield structure quantitatively were given by using flowfield data from the computational results. In the region before the vortex breakdown, the vortex axes are approximated as being straight line. As the angle of attack increases, the vortex axes are closer to the root chord, and farther away from the wing surface. Along the vortex axes, as the adverse pressure gradients occur, the axial velocity decreases, that is, A is negativee, so the vortex is unstable, and it is possible to breakdown. The occurrence of the breakdown results in the instability of lateral motion for a delta wing, and the lateral moment diverges after a small perturbation occurs at high angles of attack. However, after a critical angle of attack is reached the vortices breakdown completely at the wing apex, and the instability resulting from the vortex breakdown disappears.     

Computational modeling of vortex breakdown control on a delta wing

We present an effort to model the development and the control of the vortex breakdown phenomenon on a delta wing. The pair of the vortices formed on the suction side of a delta wing is the major contributor to the lift generation. As the angle of attack increases, these vortices become more robust, having high vorticity values. The critical point of a delta wing operation is the moment when these vortices, after a certain angle of attack, are detached from the wing surface and wing stall occurs. In order to delay or control the vortex breakdown mechanism, various techniques have been developed. In the present work, the technique based on the use of jet-flaps is numerically investigated with computational fluid dynamics by adopting two eddy-viscosity turbulence models. The computational results are compared with the experimental data of Shih and Ding (1996). It is shown that between the two turbulence models, the more advanced one, which adopts a non-linear constitutive expression for the Reynolds-stresses, is capable to capture the vortex breakdown location for a variety of jet exit angles. The performance assessment of the models is followed by the investigation of the effect of the jet-flap on the lift and drag coefficients.     

Vortex breakdown over a delta wing with oscillating leading edge flaps

 The effects of oscillating leading-edge flaps on leading-edge vortices and vortex breakdown were investigated for a delta wing with upward-deflected flaps. The variation of breakdown location revealed hysteresis loops. The time-averaged breakdown location over one cycle may move upstream or downstream compared to the quasi-steady case, depending on the amplitude of flap oscillations and angle of attack. Measurements of the phase-averaged velocity upstream of breakdown did not reveal any correlation to the response of breakdown location. The effect of oscillating flaps is largest when the breakdown location is near the trailing-edge region in the static case. Received: 2 February 1997/Accepted: 7 April 1997     

Vortex breakdown and its control on delta wings

In order to investigate the breakdown of vortices generated by the leading edge of delta wings, LDA-measurements have been performed in the flow on the suction side of a delta wing of aspect ratio A = 2. The measurements describe the growth of the vortex along the leading edge and reveal a certain radial structure upstream of the breakdown point. Moreover they shed light on the mechanism responsible for the onset of vortex breakdown on the suction side of a wing.

The occurrence of the breakdown phenomenon on a delta wing may be prevented or at least retarded by the use of spanwise blowing jets. The interaction of vortex and jets giving rise to these effects will also be discussed with the help of measured velocity profiles.     

Three-dimensional measurements of vortex breakdown

Leading-edge vortex formation and breakdown have been measured over a periodically plunging non-slender delta wing at a high angle of attack, using a three-dimensional particle-tracking method. A very rare type of vortex breakdown in the form of a double helix has been captured in the phase-averaged flow at a specific phase of the oscillation cycle.     

三角翼前缘涡的某些破裂形式及特性研究

基于流动显示和PIV技术测量的实验结果，对三角翼前缘涡破裂的一些形式和破裂特性进行了分析和讨论。通过PIV测量所得到的涡量分布证实了在螺旋破裂的情况下，涡核的螺旋方向与前缘涡的旋转方向相反，及双螺旋破裂形式的存在等。进而对螺旋波的形成机理提出了与有关文献不同的看法。     

定常吹气对倾转旋翼机向下载荷的影响

为进一步提高倾转旋翼机悬停状态下的有效载重,开展了定常吹气流动控制对向下载荷的影响研究。首先应用延迟脱体涡模拟(DDES)方法对翼型-90°迎角下非定常大范围分离流动结构进行了数值分析;然后分别开展了前缘吹气、后缘吹气降载措施研究,揭示了吹气降载的机理,并对不同吹气口位置和吹气动量系数的影响进行了定量分析,最后开展了前、后缘同时吹气作用下降载数值模拟研究。计算结果表明:前缘最佳吹气位置在翼型的前缘点,而后缘吹气最佳位置位于襟翼弦长的15%处;前缘吹气的降载效果要优于后缘吹气,而且吹气动量系数对向下载荷的影响较小;相对于初始未施加流动控制构型,阻力系数减小量可达到32.72%。