The conductive path in HfO2:first principles study

正The conductive path formed by the interstitial Ag or substitutional Ag in HfO_2 was investigated by using the Vienna ab initio simulation package based on the DFT theory.The calculated results indicated that the ordering of interstitial Ag ions at special positions can form a conductive path,and it cannot form at other positions. The orientation dependence of this conductive path was then investigated.Various types of super cells are also built to study the rupture of the path,which corresponds to some possible "off" states.     

Printed stretchable circuit on soft elastic substrate for wearable application

In this paper,a flexible and stretchable circuit has been fabricated by the printing method based on Ag NWs/PDMS composite.The randomly oriented Ag NWs were buried in PDMS to form a conductive and stretchable electrode.Stable conductivity was achieved with a large range of tensile strain (0-50％) after the initial stretching/releasing cycle.The stable electrical response is due to the buckling of the Ag NWs/PDMS composite layer.Furthermore,printed stretchable circuits integrated with commercial ICs have been demonstrated for wearable applications.     

Transparent conductive PVP/AgNWs films for flexible organic light emitting diodes by spraying method

In this study, a simple spraying method is used to prepare the transparent conductive films (TCFs) based on Ag nanowires (AgNWs). Polyvinylpyrrolidone (PVP) is introduced to modify the interface of substrate. The transmittance and bending performance are improved by optimizing the number of spraying times and the solution concentration and controlling the annealing time. The spraying times of 20, the concentration of 2 mg/mL and the annealing time of 10 min are chosen to fabricate the PVP/AgNWs films. The transmittance of PVP/AgNWs films is 53.4%—67.9% at 380—780 nm, and the sheet resistance is 30 Ω/□ which is equivalent to that of commercial indium tin oxide (ITO). During cyclic bending tests to 500 cycles with bending radius of 5 mm, the changes of resistivity are negligible. The performance of PVP/AgNW transparent electrodes has little change after being exposed to the normal environment for 1 000 h. The adhesion to polymeric substrate and the ability to endure bending stress in AgNWs network films are both significantly improved by introducing PVP. Spraying method makes AgNWs form a stratified structure on large-area polymer substrates, and the vacuum annealing method is used to weld the AgNWs together at junctions and substrates, which can improve the electrical conductivity. The experimental results indicate that PVP/AgNW transparent electrodes can be used as transparent conductive electrodes in flexible organic light emitting diodes (OLEDs).     

Defect-related visible luminescence of ZnO nanorods annealed in oxygen ambient

ZnO nanorods prepared by a solution-phase method are annealed at different temperatures in oxygen ambient.The luminescence properties of the samples are investigated.In the same excitation condition,the photoluminescence(PL) spectra of all samples show an ultraviolet(UV) emission and a broad strong visible emission band.The asymmetric visible emis-sion band of annealed samples has a red-shift as the annealing temperature increasing from 200 ℃ to 600 ℃ and it can be deconvoluted into two subband emissions centered at 535 nm(green emission) and 611 nm(orange-red emission) by Gaussian-fitting analysis.Analyses of PL excitation(PLE) spectra and PL spectra at different excitation wavelengths reveal that the green emission and the orange-red emission have a uniform initial state,which can be attributed to the electron transition from Zn interstitial(Zni) to oxygen vacancy(Vo) and oxygen interstitial(Oi),respectively.     

Dislocation-free undoped semi-insulating GaAs epilayers prepared by chloride chemical vapor deposition and successive wafer annealing

Dislocation-free (DF) undoped semi-insulating GaAs epilayers have been realized by chloride chemical vapor deposition and successive wafer annealing. It was found that undoped conductive DF GaAs epilayers grown on Si-doped n-type DF GaAs substrates can be converted to semi-insulating by wafer annealing at temperatures higher than 950°C. The resistivity of these semi-insulating epilayers was higher than 10⁷ Ωcm. The outdiffusion of Si from the substrate to the epilayer was analyzed by secondary ion mass spectrometry and it was found that the thickness of the outdiffusion region was only 1μm.     

Effect of Chemical Doping and Ion Implantation on Conductivity of Poly （p-phenylene vinylene） Derivatives

The surface conductivity of poly [2-methoxy-5-(3 '-methyl)butoxy]-p-phenylene vinylene (PMOMBOPV) films doped with FeCl3 and H2 SO4 by chemical method and implanted by N ions was studied and the comparison of environmental stability of conductive behavior was also investigated. The energy and dose of N ions were in the rang 15～35 kev and 3. 8× 1015 ～9. 6× 1016 ions/cm2, respectively. The conductivity of PMOMBOPV film was enhanced remarkably with the increases of the energy and dose of N ions. For example, the conductivity of PMOMBOPV film was 3.2 × 10-2 S/cm when ion implantation was performed with an energy of 35 kev at a dose of 9. 6 × 1016 ions/cm2 , which was almost seven orders of magnitude higher than that of film unimplanted. The environmental stability of conductive behavior for ionimplanted film was much better than that of chemical doped films. Moreover, the conductive activation energy of ion-implanted films was measured to be about 0.17 eV.     

Ag/PEPC/NiPc/ZnO/Ag thin film capacitive and resistive humidity sensors

In this study, thin film of blended poly-N-epoxypropylcarbazole (PEPC) (25 wt.%), nickel phthalocyanine (NiPc) (50 wt.%) and ZnO nano-powder (25 wt.%) in benzene (5 wt.%) was spin-coated on a glass substrate with silver electrodes to produce a surface-type Ag/PEPC/NiPc/ZnO/Ag capacitive and resistive sensor. The sensor with two different PEPC/NiPc/ZnO films thicknesses (330 nm and 400 nm) were fabricated and compared. The effect of humidity on capacitance and resistance of the Ag/PEPC/NiPc/ZnO/Ag sensors were investigated at two frequencies of the applied voltage: 120 Hz and 1 kHz. It was observed that at 120 Hz under humidity of up to 95% RH the capacitance of the sensors increased by 540 times and resistance decreased by 450 times with respect to humidity conditions of 50% RH. It was found that the sensor with thinner semiconducting film (330 nm) was more sensitive than the sensor with a thicker film (400 nm). The sensitivity was improved when the sensor was measured at a lower frequency if compared with a high frequency. It is assumed that the humidity response of the sensors is associated with absorption of water vapors and doping of water molecules in the semiconductors blend layer. This had been proven by the simulation of capacitance-humidity relationship.     

Measurement of CO2 concentration based on supercontinuum laser absorption spectroscopy

The concentrations of CO₂ were measured by the supercontinuum laser at normal temperature and variable temperature accurately in this paper. The absorption spectra of CO₂ at different concentrations(1.2%—9.0%) were measured in the wavelength range of 1 425—1 445 nm under the optical path of 26.4 m at 293 K and 1 atm. The experimental results showed that the positions of the primary and secondary absorption peaks(1 432 nm, 1 437 nm) were consistent with the HITRAN database. A linear model of concentration and signal intensity at 1 432 nm was established. The maximum relative error of the concentration measurement was 3.3%. The line intensities of 99.9% CO₂ in the 1 425—1 445 nm at different temperatures(298—373 K, interval of 15 K) were measured. The influence of temperature changes on the concentration measurement result was corrected and the relative error of the concentration measurement was reduced to 1.4%. Finally, the source of the uncertainty of the entire spectrum measurement system was analyzed and evaluated. This paper demonstrate that the supercontinuum laser can achieve the long-distance measurement of the CO₂ under normal temperature or variable temperature environment accurately, which provide an important reference for the long-distance gas detection on site and simultaneous detection of multi-component gases.     

Flexible transparent conductive film based on silver nanowires and reduced graphene oxide

Silver nanowires (AgNWs) with diameter of 90—150 nm and length of 20—50 μm were successfully synthesized by a polyol process. Graphene oxide (GO) was prepared by Hummers method, and was reduced with strong hydrazine hy-drate at room temperature. The flexible transparent conductive films (TCFs) were fabricated using the mixed cellulose eater (MCE) as matrix and AgNWs and reduced graphene oxide (rGO) as conductive fillers by the improved vacuum fil-tration process. Then, the optical, electrical and mechanical properties of the AgNWs-rGO films were investigated. The results show that for the AgNWs-rGO film produced with the deposition densities of AgNWs and rGO as 110 mg·m-2 and 55 mg·m-2, the optical transmission at 550 nm is 88.4% with Rs around 891 Ω·sq-1, whereas the optical transmission for the AgNWs-rGO film with deposition densities of AgNWs and rGO of 385 mg·m-2 and 55 mg·m-2 is 79.0% at 550 nm with Rs around 9.6 Ω·sq-1. There is little overt increase in Rs of the AgNWS-rGO film after tape tests for 200 times. The bending test results indicate that the change in Rs of AgNWs-MCE film is less than 2% even after 200 cycles of compressive or tensile bending. The excellent mechanical properties of the AgNWs-rGO film can be attributed to the burying of AgNWs and rGO at the surface of MCE     

图形衬底对InGaN/GaN多量子阱太阳能电池性能的提升

In this paper, the enhanced performance of InGaN/GaN multiple quantum well solar cells grown on patterned sapphire substrates （PSS） was demonstrated. The short-circuit current （Jsc） density of the solar cell grown on PSS showed an improvement of 60%, compared to that of solar cells grown on conventional sapphire substrate. The improved performance is primarily due to the reduction of edge dislocations and the increased light absorption path by the scattering from the textured surface of the PSS. It shows that the patterned sapphire technology can effectively alleviate the problem of high-density dislocations and low Jsc caused by thinner absorption layers of the InGaN based solar cell, and it is promising to improve the efficiency of the solar cell.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NOTICE OF CHANGING JOURNAL OF ELECTRONICS （CHINA） TO MICROSYSTEMS ＆ NANOENGINEERING

正Journal of Electronics(China)(JE)was founded in 1984,sponsored by the Institute of Electronics,Chinese Academy of Sciences.JE is one of the first English academic journals in China in the field of Electronics and Information technology.The journal was published quarterly since it was launched in 1984 to 2003,then it is published bimonthly till now.During