一种新型的双功能氧电极材料——Pb-Sb-Ru焦绿石型复合氧化物的合成及其性能研究

用溶液共沉淀法合成的比表面高、导电性良好的焦绿石型复合氧化物(Pb_2[Ru_(2-s-y)Sb_(?)Pb_(?)]-O_(7-s)),是一种富Pb的氧化物。其良好的导电性来源于Pb、Ru价态的可变性和多种价态的共存。用这种材料制成的多孔电极上得到的氧还原、氧析出稳态极化曲线及寿命实验结果表明,室温下这种氧化物在KOH溶液中,对氧还原及氧析出均具有很好的电催化活性和稳定性。     

La1－xSrxNi1－yCoyO3双功能氧电极的电化学性能

采用溶胶-凝胶法制备了一系列La1－xSrxNi1－yCoyO3（x=0、0.1、0.2、0.5； y=0～1.0）型的钙钛矿催化剂，并以活性碳为载体制备双功能氧电极.对催化剂进行了XRD结构分析以及XPS表面分析.采用三电极体系测试了氧电极的稳态极化曲线和电化学交流阻抗谱并对其阴极极化和阳极极化谱图进行了分析.实验表明，对于LaNiO3化合物，B位掺杂可显著提高催化剂表面的B离子浓度, 从而提高电催化性能；而A位掺杂由于导致有序化氧空位的增多和电导的降低而造成活性下降.电极氧还原反应的极化主要由电荷转移反应和能斯特扩散过程造成.     

焦耳热快速合成双功能电催化剂用于高效水分解

电解水是有效的产氢方式之一, 开发具有高催化活性的电极材料是当前电解水的研究热点,但仍面临诸多挑战。 本研究报告了一种通过焦耳热技术快速制备多金属异质结构, 并将其用作电解水的双功能电催化剂, 展现出优异的电解水催化活性。通过焦耳热处理三种金属前驱涂覆的碳布, Mo₂C和CoO/Fe₃O₄异质结构形成。当其用作析氢（HER）和析氧（OER）的双功能催化剂时, 仅需121 mV和268 mV的过电位,可以实现10 mA·cm^-2的电流密度。当用于两电极电解水时, MoC/FeO/CoO/CC作为阳极和阴极催化剂表现出优异的电催化性能和长期稳定性, 仅需1.69 V即可实现10 mA·cm^-2的电流密度, 并且展现出25小时的稳定性。本研究通过简单、 快速的焦耳热技术实现了双金属/多金属异质结构的构筑,并应用于高效水电解,为合理设计多金属异质结构提供指导。     

水系体系中CO2在稀土(Nd)(Ⅲ)双酞菁修饰电极上的电催化还原研究

探讨了CO_2在稀土(Nd)(Ⅲ)双酞菁修饰电极上的电催还原行为。通过滴涂法将稀土(Nd)(Ⅲ)双酞菁担载在玻碳电极上制备成它的修饰电极,在水溶液中利用循环伏安、红外光谱法等方法研究制备的修饰电极对CO_2的电催化还原性能。结果表明,所制备的稀土(Nd)(Ⅲ)双酞菁修饰电极对CO_2的电催化还原有较高的活性,还原电流随修饰量增加而变大,修饰电极的还原电流与溶液的pH值有关,随着pH值变大,还原峰向负方向移动。实验结果表明,稀土(Nd)(Ⅲ)双酞菁修饰电极对二氧化碳电化学还原具有很好的电催化活性,在该修饰电极上,CO_2可在较正的电位下被还原。     

双-Keggin型四元杂多化合物[Nd(SiMo7W4O39)2]13-多层膜在化学修饰玻碳电极上的组装及电催化

报道双-Keggin型四元杂多化合物K10H3[Nd(SiMo7W4O39)2]XH2O(简称[Nd(SiMo7W4)2]^13-）聚合物的交替组装多层膜在4-氨基苯甲酸修饰玻碳电极上的制备及其电化学特性。各层的循环伏安行为证明膜的均匀增长，峰电流随层数的增加而增加，与溶液中的电化学行为相比，位于多层膜中的杂多化合物的氧化还原特征峰随着多层膜层数的增加，具有一定程度的形变。该电极具有较高的稳定性。并讨论了pH对其氧化还原行为的影响，考察了该多层膜修饰电极对BrO3^-、HNO2和H2O2等的电催化性能。     

基于Ag/AgCl丝双涂膜曲马多离子选择电极的研制与应用

以Ag/AgCl丝为基体依次外涂含0.1mol/LKCl的琼脂凝胶膜及含四苯硼 曲马多缔合物的PVC膜,制备了一种双涂膜曲马多离子选择电极。该电极的线性范围为2.5×10-5～1.0×10-2mol/L,斜率为57.3mV/pc,检出限为1.6×10-5mol/L,性能稳定,体积微小,能用于盐酸曲马多制剂的含量测定。     

双功能催化剂Ru2P在N-杂环加氢和无受体脱氢反应中的几何效应和电子效应

饱和及不饱和N-杂环化合物是非常重要的药物中间体.由于它们在催化剂表面的吸附/脱附能力不同,设计具有合适电子结构和几何结构的催化剂用于饱和与不饱和N-杂环化合物的可逆转化具有很大挑战性.目前,负载型纳米金属催化剂通常被用于饱和N-杂环化合物的加氢反应或者不饱和杂环化合物的脱氢反应.然而反应过程中N-杂环化合物与纳米金属的强配位作用,不仅影响其他反应底物与活性位点的接触,而且导致催化剂的循环稳定性较差.在之前的研究中,钌(Ru)催化剂被用于喹啉化合物的选择加氢反应,但反应条件苛刻,循环稳定性差,不能实现杂环化合物的可逆转化.本文在Ru纳米颗粒的晶格中引入杂原子,诱导催化剂表现出不同的几何结构和电子性质,从而调节反应势垒和底物在催化剂表面的脱附能力以优化反应性能.本文以活性炭(AC)为载体,制备了Ru₂P,RuO₂,RuS₂和Ru四种负载型催化剂,以喹啉和四氢喹啉为模型反应物,考察其催化性能.研究发现,Ru₂P/AC可在温和条件下同时实现喹啉的加氢反应和四氢喹啉的无受体脱氢反应,且催化剂经过8次循环使用后,其转化率仍高达95%,选择性达到99%,远优于Ru/AC.密度泛函理论计算结果表明,Ru₂P中的P原子使得两个相邻的Ru-Ru原子的间距从2.61?增加到2.9?.同时P对催化剂几何结构的变化使反应底物在催化剂表面的吸附行为发生改变,即喹啉和四氢喹啉分子都更容易在Ru₂P的表面发生脱附,从而有利于反应进行.通过差分电荷分析,P原子掺杂会将Ru从零价状态调整为缺电子状态.随着P原子掺杂到Ru金属中,反应物表面的电荷大幅度下降,提高了加氢反应和脱氢反应中产物的扩散能力.进一步计算反应路径结果表明,Ru₂P实现了N-杂环化合物可逆加氢/脱氢过程中反应与扩散之间的平衡,从而在加氢和脱氢反应中均表现出优异的催化性能.通过浸渍、热解制备的Ru₂P/AC对一系列N-杂环化合物的加氢和脱氢反应均表现出优异的催化性能.这主要归因于P原子的掺入稀释了Ru-Ru团簇,引起的几何效应和电子效应的协同作用实现了N-杂环化合物加氢/脱氢过程反应与扩散的平衡,从而提高了可逆反应的催化性能.本文通过原子掺杂调控催化活性的本征结构,从而优化出具有平衡反应和产物扩散的优异催化剂.该合成策略具有直接通用的特点,易于拓展到其它复杂的反应体系当中.     

双功能化合物-二氯荧光素二丙烯酸酯的合成与生物活性

荧光素主要用于生物细胞染色。本文合成了二氯荧光素二丙烯酸酯,并用元素分析,核磁共振,红外、紫外、荧光光谱进行表征,考察发现它对人体外培养肿瘤细胞L1210有很强的瞬时杀伤作用;对人体胃腺癌(SGC 7901)细胞增殖有很强的抑制作用;并可用于鉴定蚕豆花粉细胞的生活力和生活状态。1　实验部分1 1　试剂与仪器荧光素(上海医药化工试剂采购供应站)、丙烯酸、氯化亚砜(A R)。细胞由中科院上海药物研究所提供。意大利1106型元素分析仪,NICOLETFT IR170SX型IR仪(KBr压片),FT Ac80型核磁共振仪,KOFLER熔点仪(温度计未校正)。1 2　…     

2-异噁唑啉等氮杂环化合物在二铬酸氢四吡啶合镍(II)氧化下的脱氢芳构化反应

研究了 3 ,5 二芳基 4,5 二氢异唑化合物 ( 1a～ 1e) ,1,4 二氢吡啶化合物 ( 3a～ 3c)和 1,3 ,5 三苯基 4,5 二氢吡唑化合物 ( 5 )分别在二铬酸氢四吡啶合镍 (II) [(Py) 4 Ni(HCrO4) 2 ]氧化下脱氢反应的结果 ;研究了在 [(Py) 4 Ni(HCrO4) 2 ]存在下 ,吡啶叶立德、喹啉叶立德或异喹啉叶立德分别和缺电子烯烃反应 ,一步法合成中氮茚衍生物 9a～ 9b ,11a～ 11b ,13的结果 .发现金属配合物氧化剂二铬酸氢四吡啶合镍 (II)可用于多类杂环化合物的脱氢芳构化 .     

2-异噁唑啉等氮杂环化合物在二铬酸氢四吡啶合镍(Ⅱ) 氧化下的脱氢芳构化反应

研究了3,5-二芳基-4,5-二氢异噁唑化合物(1a～1e),1,4-二氢吡啶化合物(3a～3c)和1,3,5-三苯基-4,5-二氢吡唑化合物(5)分别在二铬酸氢四吡啶合镍(Ⅱ)[(Py)4Ni(HCrO4)2]氧化下脱氢反应的结果;研究了在[(Py)4M(HCrO4)2]存在下,吡啶叶立德、喹啉叶立德或异喹啉叶立德分别和缺电子烯烃反应,一步法合成中氮茚衍生物9a～9b,11a～11b,13的结果.发现金属配合物氧化剂二铬酸氢四吡啶合镍(Ⅱ)可用于多类杂环化合物的脱氢芳构化.     

Upgrading and expanding the scope of homogeneous transfer hydrogenation

Transfer hydrogenation using inexpensive and safe hydrogen sources of alcohols and formic acid has been studied thoroughly over the decades. In particular, the asymmetric version offers the state-of-the-art methods to obtain optically active alcohols and amines, which are valuable synthetic intermediates in the field of pharmaceutical and agrochemical industry. This digest paper highlights the recent notable advances in homogeneous transfer hydrogenation using transition metal complexes, especially in direction to establish practical greener processes by upgrading the catalyst performance or by expanding the scope of reducible functional groups.     

Structure–reactivity relationship in transfer hydrogenation of aliphatic ketones over magnesium oxide

The vapour phase reduction of various aliphatic ketones to the corresponding carbinols by propan-2-ol in the presence of MgO as a catalyst has been studied. A strong decrease of the reactivity (from 86 to 0%) in the reduction of pentan-3-one and its polymethyl derivatives with an increase of the bulkiness of both alkyl groups in the ketone has been observed. For ketones with the general formula CH₃-(CH₂)_n-CO-(CH₂)_8–n-CH₃, where n = 0, 1, 2, 3 and 4, a shift of the carbonyl group to the middle of a molecule causes only a small decrease of the reactivity. It has been stated that the observed changes in the reactivity of ketones are mainly caused by a steric hindrance around their carbonyl groups.     

双功能催化剂催化CO2加氢制低碳烯烃反应中In2O3的尺寸效应

CO2催化加氢转化成高附加值化学品如低碳烯烃(C2=–C4=)等是减少碳排放的有效途径之一.采用金属氧化物/分子筛双功能催化剂可以实现CO2加氢直接高选择性合成C2+碳氢化合物.通常认为,金属氧化物组分可以活化CO2转化为甲醇等含氧中间体,该中间体在分子筛孔道内进一步转化为各种烃.氧化铟(In2O3)/SAPO-34双功能催化剂由于具有出色的催化CO2加氢制低碳烯烃反应性能而备受关注,然而,仍需进一步提升催化剂的催化性能以推动该反应的工业应用.目前,氧化物的结构与双功能催化剂性能之间的关系还不明确,这不利于其催化性能的改善.现有关于金属氧化物纳米粒子的尺寸(特别是小于23 nm)效应及其对双功能催化CO2加氢反应的活性和产物分布的影响的报道较少,对此深入理解将有利于设计更高性能的催化剂.本文采用沉淀法,通过控制焙烧温度得到了一系列尺寸为7～28 nm的立方相In2O3,通过多种表征手段探究了In2O3的尺寸对其结构与表面化学性质的影响.结果表明,随着In2O3晶粒尺寸的减小,其氧空位数目、CO2、H2与NH3吸附量以及Lewis较强酸性位比例均逐渐增加.在350oC,3 Mpa,9000 mL·gcat–1·h–1和H2/CO2比为3的反应条件下,研究了In2O3/SAPO-34双功能催化剂中In2O3粒径对其催化CO2加氢制低碳烯烃反应性能的影响.结果表明,随着双功能催化剂中In2O3尺寸的增大,低碳烯烃(尤其是丙烯)选择性、收率及烯烃与烷烃比例均先升高后降低,在尺寸为19 nm的In2O3上达到最大值,分别为76.9％、12.3 mmol goxide–1 h–1和4.8.较小尺寸的In2O3虽然具有较大的比表面积和更多的氧空位,并为CO2和H2的活化提供了更多的活性位,但小于19 nm的颗粒更容易烧结;In2O3的尺寸还会影响其与SAPO-34的协同效应,进而影响双功能催化剂的催化活性.此外,相对于其它尺寸的In2O3,19 nm的In2O3更有利于甲醇中间体的生成.因而19 nm In2O3耦合SAPO-34的双功能催化剂性能最好,其催化CO2转化率最高,为14.1％.综上,适中尺寸的In2O3能够促进In2O3/SAPO-34上CO2加氢制低碳烯烃反应.这些结果为通过平衡结构稳定性和催化性能来设计更有效的催化CO2转化的复合催化剂提供了理论指导.     

Regio- and chemoselective transfer hydrogenation of quinolines catalyzed by a CpIr complex

An efficient method for the transfer hydrogenation of quinolines catalyzed by a Cp^∗Ir complex was developed. A variety of 1,2,3,4-tetrahydroquinolines were obtained by regio- and chemoselective transfer hydrogenation of quinolines using 2-propanol as a hydrogen source.     

Osmium pyme complexes for fast hydrogenation and asymmetric transfer hydrogenation of ketones

The osmium compound trans,cis-[OsCl2(PPh3)2(Pyme)] (1) (Pyme=1-(pyridin-2-yl)methanamine), obtained from [OsCl2(PPh3)3] and Pyme, thermally isomerizes to cis,cis-[OsCl2(PPh3)(2)(Pyme)] (2) in mesitylene at 150 degrees C. Reaction of [OsCl2(PPh3)3] with Ph2P(CH2)(4)PPh2 (dppb) and Pyme in mesitylene (150 degrees C, 4 h) leads to a mixture of trans-[OsCl2(dppb)(Pyme)] (3) and cis-[OsCl2(dppb)(Pyme)] (4) in about an 1:3 molar ratio. The complex trans-[OsCl2(dppb)(Pyet)] (5) (Pyet=2-(pyridin-2-yl)ethanamine) is formed by reaction of [OsCl2(PPh3)3] with dppb and Pyet in toluene at reflux. Compounds 1, 2, 5 and the mixture of isomers 3/4 efficiently catalyze the transfer hydrogenation (TH) of different ketones in refluxing 2-propanol and in the presence of NaOiPr (2.0 mol %). Interestingly, 3/4 has been proven to reduce different ketones (even bulky) by means of TH with a remarkably high turnover frequency (TOF up to 5.7 x 10(5) h(-1)) and at very low loading (0.05-0.001 mol %). The system 3/4 also efficiently catalyzes the hydrogenation of many ketones (H2, 5.0 atm) in ethanol with KOtBu (2.0 mol %) at 70 degrees C (TOF up to 1.5 x 10(4) h(-1)). The in-situ-generated catalysts prepared by the reaction of [OsCl2(PPh3)3] with Josiphos diphosphanes and (+/-)-1-alkyl-substituted Pyme ligands, promote the enantioselective TH of different ketones with 91-96 % ee (ee=enantiomeric excess) and with a TOF of up to 1.9 x 10(4) h(-1) at 60 degrees C.     

Magnetically recoverable supported ruthenium catalyst for hydrogenation of alkynes and transfer hydrogenation of carbonyl compounds

A ruthenium (Ru) catalyst supported on magnetic nanoparticles (NiFe₂O₄) has been successfully synthesized and used for hydrogenation of alkynes at room temperature as well as transfer hydrogenation of a number of carbonyl compounds under microwave irradiation conditions. The catalyst shows excellent selectivity toward the desired products with very high yield even after five repeated uses.     

pH-Regulated transfer hydrogenation of quinoxalines with a Cp*Ir-diamine catalyst in aqueous media

The combination of [Cp*IrCl₂]₂ with N-(2-aminoethyl)-4-(trifluoromethyl)benzenesulfonamide constitutes an efficient catalyst for selective transfer hydrogenation of a variety of quinoxalines in water with HCOONa as the hydrogen source, affording the corresponding tetrahydroquinoxalines in good to excellent yields. The catalyst is air-stable, and the reduction could be performed without nitrogen protection. The aqueous phase reduction is shown to be highly pH-dependent, with acidic pH leading to better results. There exits a pH window for optimum rate, and the use of HOAc/NaOAc buffer solution is essential for maintaining a stable pH during the reaction.     

Enhancement of electron transfer kinetics on a polyaniline-modified electrode in the presence of anionic dopants

The electrocatalytic redox behavior of 1,4-naphthoquinone (NQ) has been studied on a polyaniline-modified platinum electrode (PANI) using cyclic voltammetry and rotating disc electrode (RDE) as diagnostic techniques. The modified electrode was prepared by electropolymerization of aniline in different acidic solutions. The PANI showed electrocatalytic activity toward the redox behavior of NQ. This process includes the participation of PANI to the redox reaction of NQ via the surface catalysis phenomena. The cyclic voltammograms of NQ in HCl on the PANI-Cl-modified electrode showed an overlapped oxidation peak, the peak potential of which did not change with increasing scan rate. The influence of other anions including and as dopant was also studied and compared with Cl⁻. The use of HClO₄ as a supporting electrolyte resulted in well-separated redox peaks. The RDE voltammogram was used to obtain a quantitative assessment of reaction rate at the PANI-modified electrode. It was found that PANI acts as an electrocatalyst for NQ reduction with decreasing ΔE _p and increasing k°.     

Ruthenium(II) complex catalysts bearing a pyridyl-supported pyrazolyl-imine ligand for transfer hydrogenation of ketones

A new class of hemilabile unsymmetrical 2-(1-arylimino)-6-(pyzazol-1-yl)pyridine ligands and their ruthenium(II) and nickel(II) NNN complexes were synthesized. The Ru(II) complex catalysts have been fully characterized and exhibited good to excellent catalytic activity in the transfer hydrogenation (TH) of ketones in refluxing 2-propanol. These results have demonstrated rare examples of active ruthenium(II) NNN complex catalysts that do not feature a N-H functionality for TH of ketones.     

Quinoline-functionalized N-heterocyclic carbene complexes of iridium: Synthesis, structures and catalytic activities in transfer hydrogenation

Iridium complexes containing quinoline-functionalized N-heterocyclic carbene (NHC) ligands have been synthesized by the transmetalation route from silver carbene precursors. The silver complexes undergo a facile reaction with [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) to yield a series of carbene complexes [(NHC)Ir(COD)Cl] (NHC = 3-methyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2a); 3-n-butyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2b); 3-benzyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2c); 1,3-di(8-quinolylmethyl)imidazole-2-ylidene (2d). The coordinated COD was replaced by carbon monoxide to yield the corresponding carbonyl species [(NHC)Ir(CO)₂Cl] (3). Complexes 2 and 3 have been characterized by IR, ESI-MS, ¹H and ¹³C NMR and elemental analyses. The molecular structures of complexes 2b and 2c have been confirmed by single-crystal X-ray diffraction. Two analogous Ir(I) complexes 5 and 6 with naphthalene-containing NHC have also been synthesized and characterized. These Ir(I) complexes in the current work have been proved to be active catalysts in the transfer hydrogenation of ketones to alcohols using 2-propanol as the hydrogen source.