Introduction of new technological achievements and development in the field of flame retardancy (FR)
Review of the current state of science and technology in FR
Review of applications and markets for FR products
Presentation of recent developments in local and global standardization and in testing technology
Discussion of toxicity and environmental issues
Provision of a unique opportunity for newcomers to FR research technology and marketing to become acquainted with the FR field in all its aspects
Discussion of halogen-based and non-halogen-based flame retardant chemicals, syngergism, intumescence, FR mechanisms, modeling, flame parameters, inherently FR polymers, and polymer blends 相似文献
1. Surface irregularities caused by melt flow phenomena
2. Crystallization behavior
3. Melt drawing phenomena in certain types of polyethylene 相似文献
- oxido-flocculation, using Fe2+, H2O2
- inter-oxidation, using O3, H2O2 and eventually an heterogeneous catalyst.
- disinfection, using UV, O3 and H2O2 combinations.
Results show that triazines can be removed by all these processes with different efficiencies. At full scale, the O3/H2O2 process presents the best performances from an economical and technical point of view. 相似文献
The operation of these water treatment systems has shown that safe and high quality pool water is obtained reliably and economically. One pool (Main Pool) is of Olympic size, the other (Learner pool) is designed especially for use by children. Both pools utilize a full corona discharge ozone water treatment system. They were the first ozone systems in the U.S. to be built for public pools using the process of ozonation, flocculation, filtration, ozone removal and residual chlorination.
An extensive testing program was initiated in cooperation with the Wisconsin Department of Health. The bacteriological water quality from these swimming pools was in compliance with Wisconsin State Health Regulations and the German DIN Standard 19,643.
The first year of operation of the Peck Aquatic Center has shown that the corona discharge ozone pool water treatment process can:
1) Operate reliably in a public swimming pool environment without the need for highly or special operator qualifications.
2) Produce continuously bacteria- and virus-free pool water without the harmful and unpleasant effects of chlorine.
3) Creates a user constituency group praising and promoting the use of “minimal chlorine swimming” in the community. 相似文献
The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.
In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.
For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.
INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.
With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.
The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.
One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness. 相似文献
Both parameters were considered in terms of a stagnant contribution (due to the heat conduction through the solid particles and the fluid in the void space) and a radial mixing contribution (due to the heat convection by turbulent mechanism.
The stagnant contribution was interpreted with a model similar to that proposed by Kunii and Smith (1966) for heat transfer in a packed bed with motionless fluid.
General correlating equations for calculating the stagnant and the turbulent contributions of both ke, and hw are proposed. 相似文献
Highlights:
Mathematical model of cascade for separation of multicomponent isotope mixture has been developed.
The model verification has been done.
The isotope transient regularities into cascade during nonstationary processes has been identified. 相似文献
There has been a high degree of proliferation of new products in the form of new polymers, new grades of existing polymers, as well as filled, reinforced, alloyed versions. While this does introduce new degrees of freedom in material selection, it is a source of significant confusion for the design engineers who have to cope with selecting the preferred material from among the many that are available. The choices and data bases are becoming confusing.
Various forms of relatively exotic, aromatic-monomer chemistry are being applied, but the emphasis appears to be on new amorphous polymers.
High-performance requirements exist in virtually all segments of the plastics field; the major end uses are in aerospace, automotive, business machines, electrical/electronics, food packaging, and medical applications.
Foreign presence has strongly increased as European companies have increased imports or have purchased established product lines or business units.
There will be continued pressure on the performance plastics from the lower priced materials which are countering with upgraded, modified, alloyed versions of their own. There is also increased competition between thermoplastics and thermosets as the result of material developments and process refinements. 相似文献
High filtration rates were tested in this study. The 2.1m deep filters were run at a hydraulic loading rate (HLR) of 35 m/h with an empty bed contact time (EBCT) of only 3.6 minutes.
The important findings of this work are
?The high-rate biologically active carbon (BAC) filters met the objective of controlling ozone DBPs. These results confirm that high rate, low EBCT filters can provide significant biodegradation. Anthracite biofilters provided significantly less removal of ozone DBPs.
?The high rate BAC filters showed significant reduction of background HAAs. BAC reduced the background HAAs to below the long-term target of 30 μg/L. Anthracite biofilters did not exhibit HAA removal.
?Biological filtration with either media was ineffective for background THM removal. The long-term target of 40 μg/L could not be achieved without GAC adsorption. 相似文献
Experimental measurement of carbon dioxide absorption from mixture with air was performed in a pilot-plant column with expanded metal sheet packing irrigated with sodium hydroxide solution.
Resulting liquid and gas-side mass transfer coefficients are compared with values obtained from physical Absorption measurement of carbon dioxide into water and with measurement of gas-side mass transfer coefficient for sulphur dioxide in the same column.
The differences between determined values are discussed. 相似文献
The study of the interactions between those reactants has been made according to the following main topics :
As for THM formation, experiments conducted on simple organic compounds or on natural fulvic acids show important decreases in THM or TCAA formation after ozonation. It may be noticed, however, that the ozonation of surface waters may induce the formation of haloform precursors, usually with a low level of reactivity.
In water supplies containing bromide ions, oxidation of the latter through hypobromous acid may take place during the ozonation stage. Failing preozonation treatment, hypobromous acid is generated very rapidly during chlorination, thus inducing the formation of chloro- brominated organic compounds.
During the ozonation of fulvic acid solutions, the presence of small amounts of bicarbonate was found to improve precursor removal significantly.
It can be concluded that the partial analogy of the action of ozone or chlorine on aromatic structures, whether simple or complex (such as humic and fulvic acids), seems to indicate that the consequence of preozonation is the destruction, at least in part, of the most reactive sites for THM production, thus leading to a decrease of the volatile organochlorinated compounds formed during the post-chlorination. However, some ozonation products of natural waters are THM precursors, though of low reactivity. Then, in the presence of bromide ions, the formation of volatile organobrominated compounds may be observed during ozonation. 相似文献
It has been indicated that the removal of the five species of aromatic nitro compounds by ozonation can well be expressed mathematically by first order reaction equations. Besides, the reaction constants and half-life periods for various species of the tested nitro compounds were calculated at different temperatures and pH.
An ozonation effect index (OI) was developed in the study to express the degree of degradation of substrates by ozonation, by means of which the five aromatic nitro hydrocarbons were compared with each other and finally ranked in the following order from greatest to smallest degrees of degradation:
p-nitroaniline > nitrobenzene > p-dinitrobenzene > p-nitrotoluene > m-dinitrobenzene
It has also found that the CODm/M ratio increases with ozone doses. This means that some easily degradable intermediates are produced, and increase in concentration with increase of ozone dose in the ozonation process.
The mechanisms of removing the five aromatic nitro hydrocarbons are discussed from the viewpoint of orienting effects of substituent groups on the aromatic rings. 相似文献
Further developments are expected in the field of lamp construction and also improvement of reactor geometry. A better knowledge of the aging of the lamps is required, as well as of the photochemical reactions of oxygen in the technologies applied.
Systems presently available are most promising for application on small scale or in areas of public water distribution which have no developed structure.
Greatly enhanced mass transfer coefficients kL are measured whilst simultaneously maintaining low ozone loss. Comparisons of kL and volumetric coefficient, kL a values, are made with more conventional packed or bubble columns.
Acetic acid, 2-propanol and 4-nitrophenol, representing a wide reactivity range, are used to elucidate the applicability of rotating contactors in effluent treatment. It has been possible to study the effects of surface activity on mass transfer with subsequent reaction and to generate design data for the next generation of rotating contactors. 相似文献
Nb2O5(s) + 3Cl2 (g) + 3CO(g) = 2NbOCl3 (g) + 3CO2(g).
Up to 60% conversion, the amount of volatilized product was found to be directly proportional to the time of reaction. The external surface area of the pellets remains unchanged up to this stage while the intergranular morphology changes.
These results were compared with reaction rates of commercial pyrochlore concentrate in order to establish the fundamental reaction stages of the process of extraction of Nb2O5 from pyrochlore. 相似文献
A mathematical model is proposed to predict productivity, ?, and product concentration, θp. The model involves solving membrane transport equations simultaneously with the hydrodynamic equations. The solubility-diffusion-imperfection, or pore diffusion model, is used to describe solute and solvent transport across the membrane. The axial gradients of shell side concentration, neglected in previous investigations, are taken into account. The differential equations are solved numerically by the 4th Order Runge-Kutta method.
Predicted values of ? and θp agree within 8% and 17% respectively, with experimental data over the entire range of operating conditions. However, membrane transport coefficients were found to be concentration dependent.
An approximate analysis shows that the concentration polarization is negligible in present day hollow fiber systems. 相似文献
The authors, here report three dimensional air velocity distributions within the inside drum of model Sturtevant-type air classifier measured by a spherical five-holed Pitot-lube, and also two dimensional particle ejecting velocities on a model distributor determined by photography.
Using those results, the cut size calculated from particle trajectories in the classifier is compared with the experimental results and theoretical values. 相似文献
In the paper industry, chemical pulps are washed to recover cooking chemicals and to obtain satisfactory quality for subsequent processing. With the present increased emphasis on pulp mill closure, the industry is attempting to reduce losses from brown stock washing systems. This leads to the need for improved engineering models of the washing operation for either design or control purposes.
Countercurrent washing, either stagewise or continuous, is generally used to obtain good recoveries at relatively low dilution ratios. In the stage-wise mode, rotary vacuum filters are commonly employed with reslurrying of the stock between stages.
The important chemical species in this separation process are sodium and lignin. In addition, other attributes, such as color and BOD5, are of increasing importance with respect to the performance of pulp washing systems. Aggregate characteristics, such as total dissolved solids (TDS) are also of concern.
This paper considers stagewise countercurrent washing of pulp in a cascade of rotary vacuum filters. A model of the multicomponent mass transfer process occurring in the wash zone of each stage is developed and incorporated into the system material balances to produce results useful for either design or performance calculations. 相似文献