One-pot Synthesis and Crystal Structure of （1S,2R,3S,4R,5S）-1-Phenyl-2,4-dibenzoyl-3,5-difurylhexanol

(1S,2R,3S,4R,5S)-1-Phenyl-2,4-dibenzoyl-3,5-difurylhexanol 1 was synthesized by one-pot reaction of hypnone and furfurol in alkali H2O/EtOH solution and structurally defined to contain a chair-formed aliphatic carbocycle, on which the bulky substituents occupy the equatorial positions.     

A Convenient Approach to the Enantiopure （1S, 2S, 4S, 5S ）- and（ 1R, 2S, 4R, 5 S ）-2,5-Bis （ phenylmethyl）-l, 4-diazabicyclo[ 2.2.2 ] -octane

Cyclodipepflde (3S, 6S )-bis (phenylmethyl) piperazlne-2,5-dione was prelmred in high yield by heating phenylalanine methyl ester in toluene under reflux. The reduction of this cydodipeptide with sodium NaBH4-BF3 in DIME gave the (2S ,SS)-bis(phenyl-methyl)plperazine, which, on heating with ethylene bromide and triethyiamine, afforded the title compounds. This methodwas proved to be generally applicable to the synthesis of C2-symmetric 2, 5-disubsiituted=l, 4-diazabicyclo [ 2.2.2 ] octanefrom the corresponding natural or unnatural amino acid esters.     

Asymmetric Synthesis of （ － ）－（2R ,3R, 6S ）－Irnigaine

Asymmetric synthesis of irnigaine was achieved starting from an enantiopure β-amino ester 5 using the condensation of amino al-cohol 2 with acetylacetone and the subsequent intramolecular cycllzation as the key steps.     

Synthesis and Crystal Structure of aNovelPolythiotungstate Compound[PPh4]2[（S）2W（μ—S）2（O）W（THF）（μ—S）2W（S）2]

1 INTRODUCTION Polythiotungstate complexes can be prepared from the protonation of one sulfur atom of [WS4]2－ and subsequent intramolecular redox reactions[1,2]. For example, [(S)2W(m-S)2W(m-S)2W(S)2]2 was formed by the acidification of a diluted aqueous solution of (NH4)2[WS4] with dilute H2SO4[3]. When a diluted aqueous solution containing [WS4]2 was acidified with 0.1mol/L HCl, [(S)2W(m-S)2(O)- W(H2O)(m-S)2W(S)2]2 was formed[4]. [(S)2W- (m-S)2(S)W(m-S)2W(S)2]2 was form…     

Synthesis of Quinolone Analogues： 7-[（2S, 4R）-2-Aminomethyl-4- hydroxypyrrolidin-l-yl] Quinolones

New quinolone derivatives of 7-[(2S, 4R)-2-aminomethyl-4-hydroxypyrrolidin-l-yl] quinolone-3-carboxylic acids were synthesized by condensation of 7-halo substituted quinolone-3-carboxylic acids with (2S, 4R)-2-aminomethyl-4-hydroxypyrrolidine. These compounds were characterized by FAB-MS and IH NMR.     

Study on the Stereoselective Synthesis of Carbapenem Sidechain （2S,4S）-4-Acetylsulphanyl-2- [（S）-l-phenylethylcarbamoyl]- pyrrolidine-l-carboxylic Acid 4-Nitrobenzyl Ester

A stereoselective and economic synthesis of the carbapenem sidechain (2S, 4S)-4-ace-tylsulphanyl-2- [ (S) 1-phenylethyl-carbamoyl] pyrrolidine-l-carboxylic acid 4-nitrobenzyl ester was developed. Due to the effect of spatial hindrance, only the (2S,4S) diastereomer 3 was obtained by coupling 1 and the inexpensive racemic 2 catalyzed by EEDQ.     

Synthesis, Structure and Biological Activities of S-[α-（ 4-Methoxyphenylcarbonyl ）-2-（1,2,4-triazole-l-yl） ethyl-N, N-dime-thyldithiocarbamate

The title compound was prepared by reaction of N, N‐dimethyldithiocarbamate sodium with l‐bromo‐l‐(4‐methoxyphenylcarbonyl)‐2‐(1, 2, 4‐triazole‐l‐yl) ethane. Its crystal structure has been determined by X‐ray diffraction analysis. The crystal belongs to triclinic with space group Pī, a = 0.7339(2) nm, b = 1.1032(2) nm, c = 1.1203(2) nm, a = 90.27(3)°, β = 102.03(3)°, γ = 104.91(3)°, Z=2, V = 0.8556(3) nm³, D_c = 1.360 g/cm³, μ =0.325 mm^?1, F(000)=368, final R₁ =0.0475. The planes of 4‐methoxybenzyl group and triazole ring are nearly perpendicular to each other. The dihedral angle is 83.97°. There is an obvious π‐π stacking interaction between the molecules in the crystal lattice. The results of biological test show that the title compound has fungicidal and plant growth regulating activities.     

Synthesis and Crystal Structure of （2S,5S）-1-Aza-2-（2-pyridyl）-3-oxa-4,4-diphenylbicyclo [3.3.0] Octane

1 INTRODUCTION The catalytic asymmetric synthesis has been a challenging subject in organic synthesis. The deve- lopment of efficient enantioselective catalysts appli- cable to a wide range of carbon-carbon bond form- ing reactions represents a pivotal …     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Crystallographic report: [N,N′‐Bis‐(6‐methylpyrid‐2‐ylium)‐(1R,2R)‐1,2‐diaminocyclohexane] bis‐[(p‐cymene)‐ trichlororuthenate(II)]

The chiral compound (H₂cydiampy)[RuCl₃(p‐cymene)]₂ has been obtained in high yield by treating [RuCl₂(p‐cymene)]₂ with an excess of hydrochloric acid in the presence of one equivalent of N,N′‐bis‐(6‐methylpyrid‐2‐yl)‐(1R,2R)‐1,2‐diaminocyclohexane (cydiampy). It crystallizes in the chiral tetragonal space group P4₃2₁2, with half of the atoms of the dication related to the other half by a crystallographic C₂ axis that also makes equivalent the two anionic metal moieties. Copyright © 2005 John Wiley & Sons, Ltd.     

Separation of (3S, 3′S)-, (3R 3′R)- and (3S, 3′R)-astaxanthin via (−)-camphanic acid esters

A method is described for the qualitative and quantitative determination of configurational isomers of astaxanthin. It is based on the esterification of astaxanthin with (—)-camphanic acid chloride and analysis of the corresponding diesters by HPLC.     

The first structurally analysed nucleic acid building block containing the Reese protecting group: 2′‐O‐[1‐(2‐fluorophenyl)‐4‐methoxypiperidin‐4‐yl]‐β‐D‐(1′R,2′R,3′R,4′R)‐uridine

The title compound, C₂₁H₂₆FN₃O₇, is assembled by N—H...O and O—H...O hydrogen bonds into well‐separated two‐dimensional layers of about 15 Å thickness. The crescent conformation of the molecules is stabilized by weak intramolecular C—H...O and C—H...F hydrogen bonds. The uridine moiety adopts an anti conformation. The ribofuranose ring exists in an envelope conformation. All the endocyclic uracil bonds are shorter than normal single C—N and C—C bonds, and five of them have comparable lengths, which implies a considerable degree of delocalization of the electron density within this ring.     

Synthesis and Crystal Structure of Spiro[1-bromo(S)-4-(R)-hydroxy- 5-oxa-6-oxo-bicyclo[3.1.0]hexane-2,2''-(3''-diethyl-(-(S)-4''-Cl-benzyloxyphosphonyl-4''-(1R,2S,5R)-menthyloxybutyrolactone)]

The title compound, spiro[1-bromo(S)-4-(R)-hydroxy-5-oxa-6-oxo-bicyclo[3.1.0]-hxane-2,2'-(3'-diethyl-α-(S)-4'-Cl-benzyloxyphosphonyl-4'-(1R,2S,5R)-menthyloxybutyrolactone)] has been synthesized via the tandem asymmetric reaction and it crystallizes in a monoclinic system, space group P21 with a = 11.067(3), b = 12.484(2), c = 12.356(2)(A), β = 101.95°,C29H39BrC1O10P, Mr = 693.93, V= 1670.2(6) (A)3, Z= 2, Dc= 1.380 g/cm3, λ(MoKα) = 0.071073nm, μ = 1.410 mm-1, F(000) = 720, the final R = 0.0570 and wR = 0.0758 for 6190 observed reflections with I ＞ 2σ(I). The structure is characterized by the special combination of biologic phosphonyl group and one cyclopropane as well as two butyrolactones. The intermolecular hydrogen bond between O(3)-H(3A)…O(10) in the crystal lattice has been observed.     

The heteroscorpionate ligand 2,2‐bis(3,5‐dimethylpyrazol‐1‐yl)‐1,1‐diphenylethanol and an easy preparation of its tungsten complex

The heteroscorpionate ligand 2,2‐bis(3,5‐dimethylpyrazol‐1‐yl)‐1,1‐diphenylethanol, C₂₄H₂₆N₄O, features in the solid state an intramolecular O—H…N hydrogen bond. A heteroscorpionate tungsten complex, cis‐[2,2‐bis(3,5‐dimethylpyrazolyl)‐1,1‐diphenylethanolato]chloridodioxidotungsten(VI) tetrahydrofuran monosolvate, [W(C₂₄H₂₅N₄O)ClO₂]·C₄H₈O, was prepared by the simple mixing of solutions of the ligand and WOCl₄ in tetrahydrofuran. The tungsten complex was isolated after standing for several weeks. The complex exhibits a κ³N,N′,O‐coordination of the ligand. This simple synthetic procedure allows access to the cis isomer in high yield without additional purification steps. The Hirshfeld surface analysis shows a change of the intermolecular contacts due to the coordination of the WO₂Cl unit with the ligand molecule.     

Synthesis,Crystal Structure,and Properties of a Cadmium(II) Complex with the Flexible Ligand (1′H‐[2, 2′]Biimidazoly‐1‐yl)‐acetic Acid

A novel coordination polymer {[Cd(BDAC)]₂ · H₂O}_n ( 1 ) [HBDAC = (1′H‐[2, 2′]biimidazoly‐1‐yl)‐acetic acid] was synthesized under hydrothermal conditions and characterized by elemental analysis and single‐crystal X‐ray diffraction. Complex 1 crystallizes in the acentric orthorhombic space group Ccc2. The Cd1 atoms and BDAC^2– ligands construct [Cd1(BDAC)] rhomboid grid (4, 4)‐topology layer motifs, whereas the Cd2 atoms and BDAC^2– ligands form [Cd2(BDAC)] 1D coordination polymer ribbons. Furthermore, adjacent lay motifs are linked into 3D net structures by 1D coordination polymer ribbons with 4‐connected 3D trinodal {4²8²10²}{4⁴6²}{4³6²8}₂ topology. The measurement of electric hysteresis loops indicated that complex 1 displays a ferroelectric characteristic.     

4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophen‐4‐one (CPDTO) homopolymer with side chains on every other CPDTO

A soluble 4H‐cyclopenta[2,1‐b ;3,4‐b ′]dithiophene‐4‐one (CPDTO)‐based polymer (C₆‐PCPDTO) has been synthesized from two monomers derived from nonalkylated CPDTO and didodecyl CPDTO (C₁₂‐CPDTO). Proton NMR, thermal analysis, UV–vis absorption, cyclic voltammetry, and XRD are used to characterize the polymer in solution and film. The new polymer has an optical bandgap of 1.28 eV in film, and has strong interchain interaction in chloroform solutions. The polymer contains a significant amount of homocoupled segments. The regular segments and homocoupled CPDTO segments render the polymer highly aggregating in solution. The non‐planar homocoupled C₁₂‐CPDTO segments prevent the polymer from forming regular π‐stacks, resulting in a low SCLC hole mobility (3.88 × 10^?7 cm²V^?1s^?1). CV experiments show that C₆‐PCPDTO is stable in its oxidized and reduced states. Solar cell devices were fabricated from C₆‐PCPDTO2 :PC₆₀BM blends of different weight ratios. High PC₆₀BM loading (80% or greater) was required for the devices to show measurable efficiency, indicating that the limited π‐stacking of the polymer is not sufficient to cause effective phase separation. Further development of synthetic method is still needed to eliminate structural defects so that long‐range ordered pi‐stacking can be realized in the polymer for these applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1077–1085     

Synthesis and α‐Mannosidase Inhibitory Evaluation of (2R,3R,4S)‐ and (2S,3R,4S)‐2‐(Aminomethyl)pyrrolidine‐3,4‐diol Derivatives

The synthesis of 46 derivatives of (2R,3R,4S)‐2‐(aminomethyl)pyrrolidine‐3,4‐diol is reported (Scheme 1 and Fig. 3), and their inhibitory activities toward α‐mannosidases from jack bean (B) and almonds (A) are evaluated (Table). The most‐potent inhibitors are (2R,3R,4S)‐2‐{[([1,1′‐biphenyl]‐4‐ylmethyl)amino]methyl}pyrrolidine‐3,4‐diol ( 3fs ; IC₅₀(B)=5 μM , K_i=2.5 μM ) and (2R,3R,4S)‐2‐{[(1R)‐2,3‐dihydro‐1H‐inden‐1‐ylamino]methyl}pyrrolidine‐3,4‐diol ( 3fu ; IC₅₀(B)=17 μM , K_i=2.3 μM ). (2S,3R,4S)‐2‐(Aminomethyl)pyrrolidine‐3,4‐diol ( 6 , R?H) and the three 2‐(N‐alkylamino)methyl derivatives 6fh, 6fs , and 6f are prepared (Scheme 2) and found to inhibit also α‐mannosidases from jack bean and almonds (Table). The best inhibitor of these series is (2S,3R,4S)‐2‐{[(2‐thienylmethyl)amino]methyl}pyrrolidine‐3,4‐diol ( 6o ; IC₅₀(B)=105 μM , K_i=40 μM ). As expected (see Fig. 4), diamines 3 with the configuration of α‐D ‐mannosides are better inhibitors of α‐mannosidases than their stereoisomers 6 with the configuration of β‐D ‐mannosides. The results show that an aromatic ring (benzyl, [1,1′‐biphenyl]‐4‐yl, 2‐thienyl) is essential for good inhibitory activity. If the C‐chain that separates the aromatic system from the 2‐(aminomethyl) substituent is longer than a methano group, the inhibitory activity decreases significantly (see Fig. 7). This study shows also that α‐mannosidases from jack bean and from almonds do not recognize substrate mimics that are bulky around the O‐glycosidic bond of the corresponding α‐D ‐mannopyranosides. These observations should be very useful in the design of better α‐mannosidase inhibitors.