Performance improvement in tensile-strained In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As metamorphic HEMT

This paper proposes a In/sub 0.5/Al/sub 0.5/As/In/sub x/Ga/sub 1-x/As/In/sub 0.5/Al/sub 0.5/As (x=0.3-0.5-0.3) metamorphic high-electron mobility transistor with tensile-strained channel. The tensile-strained channel structure exhibits significant improvements in dc and RF characteristics, including extrinsic transconductance, current driving capability, thermal stability, unity-gain cutoff frequency, maximum oscillation frequency, output power, power gain, and power added efficiency.     

Morphological and electrical characterization of SixCryCzBv thin films

Si_xCr_yC_zB_v thin films with several compositions have been studied for integration of high precision resistors in 0.8 μm BICMOS technology. These resistors, integrated in the back-end of line, have the advantage to provide high level of integration and attractive electrical behavior in temperature, for analog devices. The film morphology and the structure have been investigated through transmission electron microscopy analysis and have been then related to the electrical properties on the base of the percolation theory. According to this theory, and in agreement with experimental results, negative thermal coefficient of resistance (TCR) has been obtained for samples with low Cr content, corresponding to a crystalline volume fraction below the percolation threshold.Samples with higher Cr content exhibit, instead, a variation of the TCR as a function of film thickness: negative TCR values are obtained for thickness lower than 5 nm, corresponding to a crystalline volume fraction below the percolation threshold; positive TCR are obtained for larger thickness, indicating the establishment of a continuous conductive path between the Cr rich grains. This property seems to be determinant in order to assure the possibility to obtain thin film resistors almost independent on the temperature.     

Comparison between Pt/TiO2/Pt and Pt/TaOX/TaOY/Pt based bipolar resistive switching devices

Nonvolatile memories have emerged in recent years and have become a leading candidate towards replacing dynamic and static random-access memory devices. In this article, the performances of TiO₂ and TaO₂ nonvolatile memristive devices were compared and the factors that make TaO₂ memristive devices better than TiO₂ memristive devices were studied. TaO₂ memristive devices have shown better endurance performances (10⁸ times more switching cycles) and faster switching speed (5 times) than TiO₂ memristive devices. Electroforming of TaO₂ memristive devices requires~4.5 times less energy than TiO₂ memristive devices of a similar size. The retention period of TaO₂ memristive devices is expected to exceed 10 years with sufficient experimental evidence. In addition to comparing device performances, this article also explains the differences in physical device structure, switching mechanism, and resistance switching performances of TiO₂ and TaO₂ memristive devices. This article summarizes the reasons that give TaO₂ memristive devices the advantage over TiO₂ memristive devices, in terms of electroformation, switching speed, and endurance.     

The C-V-f and G/ω-V-f characteristics of Al/SiO2/p-Si (MIS) structures

The frequency dependence of capacitance-voltage (C-V) and conductance-voltage (G/ω-V) characteristics of the Al/SiO₂/p-Si metal-insulator-semiconductor (MIS) structures has been investigated taking into account the effect of the series resistance (R_s) and interface states (N_ss) at room temperature. The C-V and G/ω-V measurements have been carried out in the frequency range of 1 kHz to 1 MHz. The frequency dispersion in capacitance and conductance can be interpreted only in terms of interface states and series resistance. The N_ss can follow the ac signal and yield an excess capacitance especially at low frequencies. In low frequencies, the values of measured C and G/ω decrease in depletion and accumulation regions with increasing frequencies due to a continuous density distribution of interface states. The C-V plots exhibit anomalous peaks due to the N_ss and R_s effect. It has been experimentally determined that the peak positions in the C-V plot shift towards lower voltages and the peak value of the capacitance decreases with increasing frequency. The effect of series resistance on the capacitance is found appreciable at higher frequencies due to the interface state capacitance decreasing with increasing frequency. In addition, the high-frequency capacitance (C_m) and conductance (G_m/ω) values measured under both reverse and forward bias were corrected for the effect of series resistance to obtain the real diode capacitance. Experimental results show that the locations of N_ss and R_s have a significant effect on electrical characteristics of MIS structures.     

Very low-noise Al/sub 0.3/Ga/sub 0.7/As/Ga/sub 0.65/In/sub 0.35/As/GaAs single quantum-well pseudomorphic HEMTs

AlGaAs/GaInAs/GaAs pseudomorphic HEMTs with an InAs mole fraction as high as 35% in the channel has been successfully fabricated. The device exhibits a maximum extrinsic transconductance of 700 mS/mm. At 18 GHz, a minimum noise figure of 0.55 dB with 15.0 dB associated gain was measured. At 60 GHz, a minimum noise figure as low as 1.6 dB with 7.6 dB associated gain was also obtained. This is the best noise performance yet reported for GaAs-based HEMTs.<>     

A 12 /spl times/ 12 In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiode array

We report a 12 /spl times/ 12 In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiode (APD) array. The mean breakdown voltage of the APD was 57.9 V and the standard deviation was less than 0.1 V. The mean dark current was /spl sim/2 and /spl sim/300 nA, and the standard deviation was /spl sim/0.19 and /spl sim/60 nA at unity gain (V/sub bias/ = 13.5 V) and at 90% of the breakdown voltage, respectively. External quantum efficiency was above 40% in the wavelength range from 1.0 to 1.6 /spl mu/m. It was /spl sim/57% and /spl sim/45% at 1.3 and 1.55 /spl mu/m, respectively. A bandwidth of 13 GHz was achieved at low gain.     

Lanthanum diffusion in the TiN/LaOx/HfSiO/SiO2/Si stack

Band edge Complementary Metal Oxide Semiconductor (CMOS) devices are obtained by insertion of a thin LaO_x layer between the high-k (HfSiO) and metal gate (TiN). High temperature post deposition anneal induces Lanthanum diffusion across the HfSiO towards the SiO₂ interfacial layer, as shown by Time of Flight Secondary Ions Mass Spectroscopy (ToF-SIMS) and Atom Probe Tomography (APT). Fourier Transform Infrared Spectroscopy in Attenuated Total Reflexion mode (ATR-FTIR) shows the formation of La-O-Si bonds at the high-k/SiO₂ interface. Soft X-ray Photoelectron Spectroscopy (S-XPS) is performed after partial removal of the TiN gate. Results confirm La diffusion and changes in the La chemical environment.     

Al/sub 0.3/Ga/sub 0.7/As/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) doped-channel field-effect transistors (DCFET's)

The properties of both lattice-matched and strained doped-channel field-effect transistors (DCFET's) have been investigated in AlGaAs/In/sub x/Ga/sub 1-x/As (0/spl les/x/spl les/0.25) heterostructures with various indium mole fractions. Through electrical characterization of grown layers in conjunction with the dc and microwave device characteristics, we observed that the introduction of a 150-/spl Aring/ thick strained In/sub 0.15/Ga/sub 0.85/As channel can enhance device performance, compared to the lattice-matched one. However, a degradation of device performance was observed for larger indium mole fractions, up to x=0.25, which is associated with strain relaxation in this highly strained channel. DCFET's also preserved a more reliable performance after biased-stress testings.<>     

Dielectric confinement on exciton binding energy and nonlinear optical properties in a strained Zn1-xinMgxinSe/Zn1-xoutMgxoutSe quantum well

The band offsets for a Zn1-xinMgxin Se/Zn1-xoutMgxout Se quantum well heterostructure are determined using the model solid theory.The heavy hole exciton binding energies are investigated with various M...     

Highly linear Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMTs

We report an Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMT with enhanced linearity. By engineering the channel region, i.e., inserting a 6-nm-thick AlGaN layer with 5% Al composition in the channel region, a composite-channel HEMT was demonstrated. Transconductance and cutoff frequencies of a 1 /spl times/100 /spl mu/m HEMT are kept near their peak values throughout the low- and high-current operating levels, a desirable feature for linear power amplifiers. The composite-channel HEMT exhibits a peak transconductance of 150 mS/mm, a peak current gain cutoff frequency (f/sub T/) of 12 GHz and a peak power gain cutoff frequency (f/sub max/) of 30 GHz. For devices grown on sapphire substrate, maximum power density of 3.38 W/mm, power-added efficiency of 45% are obtained at 2 GHz. The output third-order intercept point (OIP3) is 33.2 dBm from two-tone measurement at 2 GHz.     

Electrooptic ferroelectric Na/sub 0.5/K/sub 0.5/NbO/sub 3/ films

We report on waveguiding and electrooptic properties of epitaxial Na/sub 0.5/K/sub 0.5/NbO/sub 3/ films grown by radio-frequency magnetron sputtering on Al/sub 2/O/sub 3/(11_02) single crystal substrates. High optical waveguiding performance has been demonstrated in infrared and visible light. The in-plane electrooptic effect has been recorded in transmission using a transverse geometry. At dc fields, the effective linear electrooptic coefficient was determined to 28 pm/V, which is promising for modulator applications.     

Light emission near 1.3 /spl mu/m using ITO-Al/sub 2/O/sub 3/-Si/sub 0.3/Ge/sub 0.7/-Si tunnel diodes

We have fabricated Sn : In/sub 2/O/sub 3/ (ITO)-Al/sub 2/O/sub 3/ dielectric on Si/sub 1-x/Ge/sub x/-Si metal-oxide-semiconductor tunnel diodes which emit light at around 1.3 /spl mu/m, for x=0.7. The emitted photon energy is smaller than the bandgap energy of Si, thus, avoiding strong light absorption by the Si substrate. The optical device structure is compatible with that of a metal-oxide-semiconductor field-effect transistor, since a conventional doped poly-Si gate electrode will be transparent to the emitted light. Increasing the Ge composition from 0.3 to 0.4 only slightly decreases the light-emitting efficiency.     

Broadband microwave noise characteristics of high-linearity composite-channel Al/sub 0.3/Ga/sub 0.7/N/Al/sub 0.05/Ga/sub 0.95/N/GaN HEMTs

We report broadband microwave noise characteristics of a high-linearity composite-channel HEMT (CC-HEMT). Owing to the novel composite-channel design, the CC-HEMT exhibits high gain and high linearity such as an output third-order intercept point (OIP3) of 33.2 dBm at 2 GHz. The CC-HEMT also exhibits excellent microwave noise performance. For 1-/spl mu/m gate-length devices, a minimum noise figure (NF/sub min/) of 0.7 dB and an associated gain (G/sub a/) of 19 dB were observed at 1 GHz, and an (NF/sub mi/) of 3.3 dB and a G/sub a/ of 10.8 dB were observed at 10 GHz. The dependence of the noise characteristics on the physical design parameters, such as the gate-source and gate-drain spacing, is also presented.     

(Al/sub 0.5/Ga/sub 0.5/)/sub 0.65/In/sub 0.35/P/Ga/sub 0.65/In/sub 0.35/P double-heterostructure orange light-emitting diodes

Visible light-emitting diodes (LEDs) emitting at 615 nm and employing the AlGaInP/GaInP double heterostructure (DH) grown on a lattice-matched GaAs/sub 0.7/P/sub 0.3/ substrate have been fabricated for the first. The external quantum efficiency of 0.156% for the orange LEDs can be achieved by introducing the GaP material as the current spreader and window layer for the DH LEDs.<>     

Pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As HEMTs with an ultrahigh f/sub T/ of 562 GHz

We fabricated decananometer-gate pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As high-electron mobility transistors (HEMTs) with a very short gate-channel distance. We obtained a cutoff frequency f/sub T/ of 562 GHz for a 25-nm-gate HEMT. This f/sub T/ is the highest value ever reported for any transistor. The ultrahigh f/sub T/ of our HEMT can be explained by an enhanced electron velocity under the gate, which was a result of reducing the gate-channel distance.     

MCU/DSC/CPU/SoC

EMMA Mobile1系列SoC NEC电子日前完成了用于便携式多媒体以及手机电视等进行视频、音频数据处理的系统芯片的开发,并以EMMA Mobile 1-D的产品名即日起开始提供样品。     

A 1 cm/spl times/1 cm In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiode array

We report a 1 cm/spl times/1 cm array of 100 In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiodes (APD). The average breakdown voltage was 28.7 V with a standard deviation of less than 0.5 V. The distribution of breakdown voltage across the area followed a radial pattern consistent with a slight epitaxial growth nonuniformity. The mean dark current at a gain of 10, or 6.1 A/W, was 10.3 nA, and none of the 100 APDs had a dark current of more than 25 nA. The bandwidth at a gain of 10 was 6.2 GHz, and the maximum gain-bandwidth product was 140 GHz. This technology is ideally suited for next-generation three-dimensional imaging applications.     

High-temperature thermal stability performance in /spl delta/-doped In/sub 0.425/Al/sub 0.575/As--In/sub 0.65/Ga/sub 0.35/As metamorphic HEMT

We report, to our knowledge, the best high-temperature characteristics and thermal stability of a novel /spl delta/-doped In/sub 0.425/Al/sub 0.575/As--In/sub 0.65/Ga/sub 0.35/As--GaAs metamorphic high-electron mobility transistor. High-temperature device characteristics, including extrinsic transconductance (g/sub m/), drain saturation current density (I/sub DSS/), on/off-state breakdown voltages (BV/sub on//BV/sub GD/), turn-on voltage (V/sub on/), and the gate-voltage swing have been extensively investigated for the gate dimensions of 0.65/spl times/200 /spl mu/m/sup 2/. The cutoff frequency (f/sub T/) and maximum oscillation frequency (f/sub max/), at 300 K, are 55.4 and 77.5 GHz at V/sub DS/=2 V, respectively. Moreover, the distinguished positive thermal threshold coefficient (/spl part/V/sub th///spl part/T) is superiorly as low as to 0.45 mV/K.