Flexible 3D Porous MXene Foam for High‐Performance Lithium‐Ion Batteries

2D transition‐metal carbides and nitrides, named MXenes, are promising materials for energy storage, but suffer from aggregation and restacking of the 2D nanosheets, which limits their electrochemical performance. In order to overcome this problem and realize the full potential of MXene nanosheets, a 3D MXene foam with developed porous structure is established via a simple sulfur‐template method, which is freestanding, flexible, and highly conductive, and can be directly used as the electrode in lithium‐ion batteries. The 3D porous architecture of the MXene foam offers massive active sites to enhance the lithium storage capacity. Moreover, its foam structure facilitates electrolyte infiltration for fast Li⁺ transfer. As a result, this flexible 3D porous MXene foam exhibits significantly enhanced capacity of 455.5 mAh g^?1 at 50 mA g^?1, excellent rate performance (101 mAh g^?1 at 18 A g^?1), and superior ultralong‐term cycle stability (220 mAh g^?1 at 1 A g^?1 after 3500 cycles). This work not only demonstrates the great superiority of the 3D porous MXene foam but also proposes the sulfur‐template method for controllable constructing of the 3D foam from 2D nanosheets at a relatively low temperature.     

Ultrathin Nitrogen‐Doped Carbon Layer Uniformly Supported on Graphene Frameworks as Ultrahigh‐Capacity Anode for Lithium‐Ion Full Battery

The designable structure with 3D structure, ultrathin 2D nanosheets, and heteroatom doping are considered as highly promising routes to improve the electrochemical performance of carbon materials as anodes for lithium‐ion batteries. However, it remains a significant challenge to efficiently integrate 3D interconnected porous frameworks with 2D tunable heteroatom‐doped ultrathin carbon layers to further boost the performance. Herein, a novel nanostructure consisting of a uniform ultrathin N‐doped carbon layer in situ coated on a 3D graphene framework (NC@GF) through solvothermal self‐assembly/polymerization and pyrolysis is reported. The NC@GF with the nanosheets thickness of 4.0 nm and N content of 4.13 at% exhibits an ultrahigh reversible capacity of 2018 mA h g^?1 at 0.5 A g^?1 and an ultrafast charge–discharge feature with a remarkable capacity of 340 mA h g^?1 at an ultrahigh current density of 40 A g^?1 and a superlong cycle life with a capacity retention of 93% after 10 000 cycles at 40 A g^?1. More importantly, when coupled with LiFePO₄ cathode, the fabricated lithium‐ion full cells also exhibit high capacity and excellent rate and cycling performances, highlighting the practicability of this NC@GF.     

3D Graphene Networks Encapsulated with Ultrathin SnS Nanosheets@Hollow Mesoporous Carbon Spheres Nanocomposite with Pseudocapacitance‐Enhanced Lithium and Sodium Storage Kinetics

The lithium and sodium storage performances of SnS anode often undergo rapid capacity decay and poor rate capability owing to its huge volume fluctuation and structural instability upon the repeated charge/discharge processes. Herein, a novel and versatile method is described for in situ synthesis of ultrathin SnS nanosheets inside and outside hollow mesoporous carbon spheres crosslinked reduced graphene oxide networks. Thus, 3D honeycomb‐like network architecture is formed. Systematic electrochemical studies manifest that this nanocomposite as anode material for lithium‐ion batteries delivers a high charge capacity of 1027 mAh g^?1 at 0.2 A g^?1 after 100 cycles. Meanwhile, the as‐developed nanocomposite still retains a charge capacity of 524 mAh g^?1 at 0.1 A g^?1 after 100 cycles for sodium‐ion batteries. In addition, the electrochemical kinetics analysis verifies the basic principles of enhanced rate capacity. The appealing electrochemical performance for both lithium‐ion batteries and sodium‐ion batteries can be mainly related to the porous 3D interconnected architecture, in which the nanoscale SnS nanosheets not only offer decreased ion diffusion pathways and fast Li⁺/Na⁺ transport kinetics, but also the 3D interconnected conductive networks constructed from the hollow mesoporous carbon spheres and reduced graphene oxide enhance the conductivity and ensure the structural integrity.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Etching‐Assisted Crumpled Graphene Wrapped Spiky Iron Oxide Particles for High‐Performance Li‐Ion Hybrid Supercapacitor

From graphene oxide wrapped iron oxide particles with etching/reduction process, high‐performance anode and cathode materials of lithium‐ion hybrid supercapacitors are obtained in the same process with different etching conditions, which consist of partially etched crumpled graphene (CG) wrapped spiky iron oxide particles (CG@SF) for a battery‐type anode, and fully etched CG for a capacitive‐type cathode. The CG is formed along the shape of spikily etched particles, resulting in high specific surface area and electrical conductivity, thus the CG‐based cathode exhibits remarkable capacitive performance of 210 F g^?1 and excellent rate capabilities. The CG@SF can also be ideal anode materials owing to spiky and porous morphology of the particles and tightly attached crumpled graphene onto the spiky particles, which provides structural stability and low contact resistance during repetitive lithiation/delithiation processes. The CG@SF anode shows a particularly high capacitive performance of 1420 mAh g^?1 after 270 cycles, continuously increases capacity beyond the 270th cycle, and also maintains a high capacity of 170 mAh g^?1 at extremely high speeds of 100 C. The full‐cell exhibits a higher energy density up to 121 Wh kg^?1 and maintains high energy density of 60.1 Wh kg^?1 at 18.0 kW kg^?1. This system could thus be a practical energy storage system to fill the gap between batteries and supercapacitors.     

Reactive Oxygen‐Doped 3D Interdigital Carbonaceous Materials for Li and Na Ion Batteries

Carbonaceous materials as anodes usually exhibit low capacity for lithium ion batteries (LIBs) and sodium ion batteries (SIBs). Oxygen‐doped carbonaceous materials have the potential of high capacity and super rate performance. However, up to now, the reported oxygen‐doped carbonaceous materials usually exhibit inferior electrochemical performance. To overcome this problem, a high reactive oxygen‐doped 3D interdigital porous carbonaceous material is designed and synthesized through epitaxial growth method and used as anodes for LIBs and SIBs. It delivers high reversible capacity, super rate performance, and long cycling stability (473 mA h g^?1after 500 cycles for LIBs and 223 mA h g^?1 after 1200 cycles for SIBs, respectively, at the current density of 1000 mA g^?1), with a capacity decay of 0.0214% per cycle for LIBs and 0.0155% per cycle for SIBs. The results demonstrate that constructing 3D interdigital porous structure with reactive oxygen functional groups can significantly enhance the electrochemical performance of oxygen‐doped carbonaceous material.     

Covalent‐Organic‐Framework‐Based Li–CO2 Batteries

Covalent organic frameworks (COFs) are an emerging class of porous crystalline materials constructed from designer molecular building blocks that are linked and extended periodically via covalent bonds. Their high stability, open channels, and ease of functionalization suggest that they can function as a useful cathode material in reversible lithium batteries. Here, a COF constructed from hydrazone/hydrazide‐containing molecular units, which shows good CO₂ sequestration properties, is reported. The COF is hybridized to Ru‐nanoparticle‐coated carbon nanotubes, and the composite is found to function as highly efficient cathode in a Li–CO₂ battery. The robust 1D channels in the COF serve as CO₂^– and lithium‐ion‐diffusion channels and improve the kinetics of electrochemical reactions. The COF‐based Li–CO₂ battery exhibits an ultrahigh capacity of 27 348 mAh g^?1 at a current density of 200 mA g^?1, and a low cut‐off overpotential of 1.24 V within a limiting capacity of 1000 mAh g^?1. The rate performance of the battery is improved considerably with the use of the COF at the cathode, where the battery shows a slow decay of discharge voltage from a current density of 0.1 to 4 A g^?1. The COF‐based battery runs for 200 cycles when discharged/charged at a high current density of 1 A g^?1.     

Encapsulation of Sulfur into N‐Doped Porous Carbon Cages by a Facile,Template‐Free Method for Stable Lithium‐Sulfur Cathode

Lithium‐sulfur (Li‐S) batteries with a high energy density and long lifespan are considered as promising candidates for next‐generation electrochemical energy‐storage devices. However, the sluggish redox kinetics of electrochemistry and high solubility of polysulfide during cycling render insufficient sulfur utilization and poor cycling stability. Herein, a facile, template‐free procedure based on controlled pyrolysis of polydopamine vesicles is described to prepare N‐doped porous carbon cages (NHSC) as a new sulfur host, which significantly improves both the sulfur utilization and cycling stability. As NHSC shows a high pore volume, continuous electron and ion transport paths, and good catalytic activity, encapsulation of S nanoparticles into NHSC endows the resulting S@NHSC electrode with a good energy storage capacity and exceptionally high electrochemical stability. Consequently, a Li‐S cell with the S@NHSC as the cathode achieves a high initial capacity of 1280.7 mAh g^?1, and cycling stability over 500 cycles with the capacity decay as low as 0.0373% per cycle.     

Flexible Graphene‐Wrapped Carbon Nanotube/Graphene@MnO2 3D Multilevel Porous Film for High‐Performance Lithium‐Ion Batteries

The ingenious design of a freestanding flexible electrode brings the possibility for power sources in emerging wearable electronic devices. Here, reduced graphene oxide (rGO) wraps carbon nanotubes (CNTs) and rGO tightly surrounded by MnO₂ nanosheets, forming a 3D multilevel porous conductive structure via vacuum freeze‐drying. The sandwich‐like architecture possesses multiple functions as a flexible anode for lithium‐ion batteries. Micrometer‐sized pores among the continuously waved rGO layers could extraordinarily improve ion diffusion. Nano‐sized pores among the MnO₂ nanosheets and CNT/rGO@MnO₂ particles could provide vast accessible active sites and alleviate volume change. The tight connection between MnO₂ and carbon skeleton could facilitate electron transportation and enhance structural stability. Due to the special structure, the rGO‐wrapped CNT/rGO@MnO₂ porous film as an anode shows a high capacity, excellent rate performance, and superior cycling stability (1344.2 mAh g⁻¹ over 630 cycles at 2 A g⁻¹, 608.5 mAh g⁻¹ over 1000 cycles at 7.5 A g⁻¹). Furthermore, the evolutions of microstructure and chemical valence occurring inside the electrode after cycling are investigated to illuminate the structural superiority for energy storage. The excellent electrochemical performance of this freestanding flexible electrode makes it an attractive candidate for practical application in flexible energy storage.     

Nitrogen‐Doped Graphene‐Buffered Mn2O3 Nanocomposite Anodes for Fast Charging and High Discharge Capacity Lithium‐Ion Batteries

Mn₂O₃ is a promising anode material for lithium‐ion batteries (LIBs) because of its high theoretical capacity and low discharge potential. However, low electronic conductivity and capacity fading limits its practical application. In this work, Mn₂O₃ with 1D nanowire geometry is synthesized in neutral aqueous solutions by a facile and effective hydrothermal strategy for the first time, and then Mn₂O₃ nanoparticle and nitrogen‐doped reduced graphene oxide (N‐rGO) are composited with Mn₂O₃ nanowires (Mn₂O₃‐GNCs) to enhance its volume utilization and conductivity. When used as an anode material for LIBs, the Mn₂O₃‐GNCs exhibit high reversible capacity (1350 mAh g^?1), stable cycling stability, and good rate capability. Surprisingly, the Mn₂O₃‐GNC electrodes can also show fast charging capability; even after 200 cycles (charge: 10 A g^?1; discharge: 0.5 A g^?1), its discharge capacity can also keep at ≈500 mAh g^?1. In addition, the Mn₂O₃‐GNCs also have considerable full cell and supercapacitor performance. The excellent electrochemical performances can be ascribed to the N‐rGO network structure and 1D nanowire structure, which can ensure fast ion and electron transportation.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

A Carbonyl Compound‐Based Flexible Cathode with Superior Rate Performance and Cyclic Stability for Flexible Lithium‐Ion Batteries

A sulfur‐linked carbonyl‐based poly(2,5‐dihydroxyl‐1,4‐benzoquinonyl sulfide) (PDHBQS) compound is synthesized and used as cathode material for lithium‐ion batteries (LIBs). Flexible binder‐free composite cathode with single‐wall carbon nanotubes (PDHBQS–SWCNTs) is then fabricated through vacuum filtration method with SWCNTs. Electrochemical measurements show that PDHBQS–SWCNTs cathode can deliver a discharge capacity of 182 mA h g⁻¹ (0.9 mA h cm⁻²) at a current rate of 50 mA g⁻¹ and a potential window of 1.5 V–3.5 V. The cathode delivers a capacity of 75 mA h g⁻¹ (0.47 mA h cm⁻²) at 5000 mA g⁻¹, which confirms its good rate performance at high current density. PDHBQS–SWCNTs flexible cathode retains 89% of its initial capacity at 250 mA g⁻¹ after 500 charge–discharge cycles. Furthermore, large‐area (28 cm²) flexible batteries based on PDHBQS–SWCNTs cathode and lithium foils anode are also assembled. The flexible battery shows good electrochemical activities with continuous bending, which retains 88% of its initial discharge capacity after 2000 bending cycles. The significant capacity, high rate performance, superior cyclic performance, and good flexibility make this material a promising candidate for a future application of flexible LIBs.     

Room‐Temperature Liquid Metal Confined in MXene Paper as a Flexible,Freestanding, and Binder‐Free Anode for Next‐Generation Lithium‐Ion Batteries

Exploring flexible lithium‐ion batteries is required with the ever‐increasing demand for wearable and portable electronic devices. Selecting a flexible conductive substrate accompanying with closely coupled active materials is the key point. Here, a lightweight, flexible, and freestanding MXene/liquid metal paper is fabricated by confining 3 °C GaInSnZn liquid metal in the matrix of MXene paper without any binder or conductive additive. When used as anode for lithium‐ion cells, it can deliver a high discharge capacity of 638.79 mAh g^?1 at 20 mA g^?1. It also exhibits satisfactory rate capacities, with discharge capacities of 507.42, 483.33, 480.22, 452.30, and 404.47 mAh g^?1 at 50, 100, 200, 500, and 1000 mA g^?1, respectively. The cycling performance is obviously improved by slightly reducing the charge–discharge voltage range. The composite paper also has better electrochemical performance than liquid metal coated Cu foil. This study proposes a novel flexible anode by a clever combination of MXene paper and low‐melting point liquid metal, paving the way for next‐generation lithium‐ion batteries.     

A Flexible Film toward High‐Performance Lithium Storage: Designing Nanosheet‐Assembled Hollow Single‐Hole Ni–Co–Mn–O Spheres with Oxygen Vacancy Embedded in 3D Carbon Nanotube/Graphene Network

Ternary transition metal oxides (TMOs) are highly potential electrode materials for lithium ion batteries (LIBs) due to abundant defects and synergistic effects with various metal elements in a single structure. However, low electronic/ionic conductivity and severe volume change hamper their practical application for lithium storage. Herein, nanosheet‐assembled hollow single‐hole Ni–Co–Mn oxide (NHSNCM) spheres with oxygen vacancies can be obtained through a facile hydrothermal reaction, which makes both ends of each nanosheet exposed to sufficient free space for volume variation, electrolyte for extra active surface area, and dual ion diffusion paths compared with airtight hollow structures. Furthermore, oxygen vacancies could improve ion/electronic transport and ion insertion/extraction process of NHSNCM spheres. Thus, oxygen‐vacancy‐rich NHSNCM spheres embedded into a 3D porous carbon nanotube/graphene network as the anode film ensure efficient electrolyte infiltration into both the exterior and interior of porous and open spheres for a high utilization of the active material, showing an excellent electrochemical performance for LIBs (1595 mAh g^?1 over 300 cycles at 2 A g^?1, 441.6 mAh g^?1 over 4000 cycles at 10 A g^?1). Besides, this straightforward synthetic method opens an efficacious avenue for the construction of various nanosheet‐assembled hollow single‐hole TMO spheres for potential applications.     

S,N-codoped carbon capsules with microsized entrance: Highly stable S reservoir for Li-S batteries

Nanostructured carbon materials are extensively applied as host materials to improve the utilization rate and reversibility of elemental sulfur in lithium sulfur (Li-S) batteries. Here, S, N-codoped carbon capsules (SNCCs) with microporous walls, prepared by a self-assembly process, are used as the sulfur host material in Li-S batteries. The SNCCs provide plenty of micron-sized cavities to accommodate a high S loading, which are sealed by thick walls with microsized entrance to efficently suppress the shuttle effect of lithium polysulfides. As the cathode in Li-S battery, the SNCCs/sulfur composite with a sulfur mass loading of 70 wt% exhibits a high average reversible capacity of 1220 and 1116 mA h g^?1 at 0.5C and 1C, respectively, superior rate performance (905 and 605 mAh g^?1 at 5C and 10C, respectively) and excellent cycling stability (capacity fading rate of 0.03% per cycle in 500 cycles). Even at a high sulfur areal loading of 7.3 mg/cm², the SNCCs/0.7S electrode still deliver a high initial discharge capacity of 838 mAh g^?1 and keeps at 730 mAh g^?1 after 100 cycles, corresponding to an extraordinary capacity retention of 87.1%, showing an excellent cyclic stability. The outstanding electrochemical performance is associated with the unique capsule structure with abundant volume, microsized entrance and high conductivity. Our results provides a new strategy to prepare highly stable sulfur-carbon composites for the application in Li-S batteries.     

Mesoporous Nitrogen‐Doped Carbon Nanospheres as Sulfur Matrix and a Novel Chelate‐Modified Separator for High‐Performance Room‐Temperature Na‐S Batteries

Room‐temperature sodium‐sulfur (RT/Na‐S) batteries are considered among the most promising next‐generation energy storage and conversion systems because of the earth‐abundant reserves of sodium and sulfur. These batteries also possess the advantages of high theoretical gravimetric capacity, high energy density, and low cost. Herein, highly uniform Fe³⁺/polyacrylamide nanospheres (FPNs) are fabricated on a large‐scale by a facile, low‐cost approach. Subsequently, mesoporous nitrogen‐doped carbon nanospheres (PNC‐Ns), obtained by carbonizing FPNs, are applied as a sulfur matrix to improve the utilization of sulfur, enhance the overall conductivity of the cathode, and inhibit the shuttling of sodium polysulfides (SPSs). In addition, graphene and FPNs are simultaneously coated onto the side of the separator to form a FPNs‐graphene‐functionalized separator (FPNs‐G/separator); here, the mesoporous FPNs effectively anchor and block the SPSs, while the large specific area graphene sheets eliminate the intrinsic mechanical brittleness of the FPNs and improve the overall conductivity of RT/Na‐S batteries. When S/PNC‐Ns as a cathode and FPNs‐G/separator are assembled into an RT/Na‐S battery, it delivers a high discharge capacity (639 mAh g^‐1 at 0.1 C after 400 cycles), stable cycle life (396 mAh g^‐1 at 0.5 C after 800 cycles), and good rate performance (228 mAh g^‐1 at 2 C).     

Hierarchically Well‐Developed Porous Graphene Nanofibers Comprising N‐Doped Graphitic C‐Coated Cobalt Oxide Hollow Nanospheres As Anodes for High‐Rate Li‐Ion Batteries

Hierarchically well‐developed porous graphene nanofibers comprising N‐doped graphitic C (NGC)‐coated cobalt oxide hollow nanospheres are introduced as anodes for high‐rate Li‐ion batteries. For this, three strategies, comprising the Kirkendall effect, metal–organic frameworks, and compositing with highly conductive C, are applied to the 1D architecture. In particular, NGC layers are coated on cobalt oxide hollow nanospheres as a primary transport path of electrons followed by graphene‐nanonetwork‐constituting nanofibers as a continuous and secondary electron transport path. Superior cycling performance is achieved, as the unique nanostructure delivers a discharge capacity of 823 mAh g^?1 after 500 cycles at 3.0 A g^?1 with a low decay rate of 0.092% per cycle. The rate capability is also noteworthy as the structure exhibits high discharge capacities of 1035, 929, 847, 787, 747, 703, 672, 650, 625, 610, 570, 537, 475, 422, 294, and 222 mAh g^?1 at current densities of 0.5, 1.5, 3, 5, 7, 10, 12, 15, 18, 20, 25, 30, 40, 50, 80, and 100 A g^?1, respectively. In view of the highly efficient Li⁺ ion/electron diffusion and high structural stability, the present nanostructuring strategy has a huge potential in opening new frontiers for high‐rate and long‐lived stable energy storage systems.     

Ultra‐High Pyridinic N‐Doped Porous Carbon Monolith Enabling High‐Capacity K‐Ion Battery Anodes for Both Half‐Cell and Full‐Cell Applications

An ultrahigh pyridinic N‐content‐doped porous carbon monolith is reported, and the content of pyridinic N reaches up to 10.1% in overall material (53.4 ± 0.9% out of 18.9 ± 0.4% N content), being higher than most of previously reported N‐doping carbonaceous materials, which exhibit greatly improved electrochemical performance for potassium storage, especially in term of the high reversible capacity. Remarkably, the pyridinic N‐doped porous carbon monolith (PNCM) electrode exhibits high initial charge capacity of 487 mAh g^?1 at a current density of 20 mA g^?1, which is one of the highest reversible capacities among all carbonaceous anodes for K‐ion batteries. Moreover, the K‐ion full cell is successfully assembled, demonstrating a high practical energy density of 153.5 Wh kg^?1. These results make PNCM promising for practical application in energy storage devices and encourage more investigations on a similar potassium storage system.     

A Host‐Configured Lithium–Sulfur Cell Built on 3D Nickel Photonic Crystal with Superior Electrochemical Performances

The insulator of the sulfur cathode and the easy dendrites growth of the lithium anode are the main barriers for lithium–sulfur cells in commercial application. Here, a 3D NPC@S/3D NPC@Li full cell is reported based on 3D hierarchical and continuously porous nickel photonic crystal (NPC) to solve the problems of sulfur cathode and lithium anode at the same time. In this case, the 3D NPC@S cathode can not only offer a fast transfer of electron and lithium ion, but also effectively prevent the dissolution of polysulfides and the tremendous volume change during cycling, and the 3D NPC@Li anode can efficiently inhibit the growth of lithium dendrites and volume expansion, too. As a result, the cell exhibits a high reversible capacity of 1383 mAh g^?1 at 0.5 C (the current density of 837 mA g^?1), superior rate ability (the reversible capacity of 735 mAh g^?1 at the extremely high current density of 16 750 mA g^?1) with excellent coulombic efficiency of about 100% and an excellent cycle life over 500 cycles with only about 0.026% capacity loss per cycle.     

Highly Safe Electrolyte Enabled via Controllable Polysulfide Release and Efficient Conversion for Advanced Lithium–Sulfur Batteries

Conventional lithium–sulfur batteries often suffer from fatal problems such as high flammability, polysulfide shuttling, and lithium dendrites growth. Here, highly‐safe lithium–sulfur batteries based on flame‐retardant electrolyte (dimethoxyether/1,1,2,2‐tetrafluoroethyl 2,2,3,3‐tetrafluoropropyl ether) coupled with functional separator (nanoconductive carbon‐coated cellulose nonwoven) to resolve aforementioned bottle‐neck issues are demonstrated. It is found that this flame‐retardant electrolyte exhibits excellent flame retardancy and low solubility of polysulfide. In addition, Li/Li symmetrical cells using such flame‐retardant electrolyte deliver extraordinary long‐term cycling stability (less than 10 mV overpotential) for over 2500 h at 1.0 mA cm^?2 and 1.0 mAh cm^?2. Moreover, bare sulfur cathode–based lithium–sulfur batteries using this flame retardant electrolyte coupled with nanoconductive carbon‐coated cellulose separator can retain 83.6% discharge capacity after 200 cycles at 0.5 C. Under high charge/discharge rate (4 C), lithium–sulfur cells still show high charge/discharge capacity of ≈350 mAh g^?1. Even at an elevated temperature of 60 °C, discharge capacity of 870 mAh g^?1 can be retained. More importantly, high‐loading bare sulfur cathode (4 mg cm^?2)–based lithium–sulfur batteries can also deliver high charge/discharge capacity over 806 mAh g^?1 after 56 cycles. Undoubtedly, the strategy of flame retardant electrolyte coupled with carbon‐coated separator enlightens highly safe lithium–sulfur batteries at a wide range of temperature.