Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007     

Chemical synthesis,characterization, and direct‐current conductivity studies of polypyrrole/γ‐Fe2O3 composites

The in situ polymerization of pyrrole was carried out in the presence of γ‐Fe₂O₃ to synthesize polypyrrole/γ‐Fe₂O₃ composites by a chemical oxidation method. The polypyrrole/γ‐Fe₂O₃ composites were synthesized with various compositions, including 10, 20, 30, 40, and 50 wt % γ‐Fe₂O₃ in pyrrole. The polypyrrole/γ‐Fe₂O₃ composites were characterized with X‐ray diffractometry and infrared spectroscopy. The surface morphology of these composites was studied with scanning electron microscopy. The direct‐current conductivity was studied from 40 to 200°C. The dimensions of the γ‐Fe₂O₃ particles in the matrix had a greater influence on the conductivity values. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2797–2801, 2007     

Anthranilic acid assisted preparation of Fe3O4–poly(aniline‐co‐o‐anthranilic acid) nanoparticles

Magnetic Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were prepared by a novel and simple method: anthranilic acid assisted polymerization. The synthetic strategy involved two steps. First, Fe₃O₄ nanoparticles capped by anthranilic acid were obtained by a chemical precipitation method, and then the aniline and oxidant were added to the modified Fe₃O₄ nanoparticles to prepare well‐dispersed Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles. Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles exhibited a superparamagnetic behavior (i.e., no hysteresis loop) and high‐saturated magnetization (M_s = 21.5 emu/g). The structure of the composite was characterized by Fourier‐transform infrared spectra, X‐ray powder diffraction patterns, and transmission electron microscopy, which proved that the Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were about 20 nm. Moreover, the thermal properties of the composite were evaluated by thermogravimetric analysis, and it showed excellent thermal stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1666–1671, 2006     

Synthesis and characteristics of a novel aliphatic polycarbonate,poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)]

A novel aliphatic polycarbonate, poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)] [P(PO? CO₂? GBL)], was synthesized by the copolymerization of carbon dioxide, propylene oxide (PO) and γ‐butyrolactone (GBL). The resulting copolymers were determined by FTIR and NMR spectral analysis with viscosity‐average molecular weights (M_v) from 50 000 to 120 000 g mol^?1. According to elemental analysis, the calculated data of elemental contents in P(PO? CO₂? GBL)44 were close to the found data. The result showed that GBL was inserted into the backbone of poly[(propylene oxide)‐co‐(carbon dioxide)] successfully. GBL offered an ester structural unit that gave the copolymer better degradability. The correlations between reaction conditions and properties were studied. When GBL content increased, the M_v and the glass transition temperature (T_g) of the copolymers improved relative to an identical copolymer without GBL. Prolonging the reaction time of the copolymerization resulted in increases in M_v and T_g. P(PO? CO₂? GBL) exhibited a high T_g above 40 °C. The rate of backbone degradation increased with increasing GBL content. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of novel core‐shell magnetic nanogels based on 2‐acrylamido‐2‐methylpropane sulfonic acid in aqueous media

Ultrafine well‐dispersed Fe₃O₄ magnetic nanoparticles were directly prepared in aqueous solution using controlled coprecipitation method. The synthesis of Fe₃O₄/poly (2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS), Fe₃O₄/poly (acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AM‐co‐AMPS) and Fe₃O₄/poly (acrylic acid‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) poly(AA‐co‐AMPS) ‐core/shell nanogels are reported. The nanogels were prepared via crosslinking copolymerization of 2‐acrylamido‐2‐methylpropane sulfonic acid, acrylamide and acrylic acid monomers in the presence of Fe₃O₄ nanoparticles, N,N′‐methylenebisacrylamide (MBA) as a crosslinker, N,N,N′,N′‐tetramethylethylenediamine (TEMED) and potassium peroxydisulfate (KPS) as redox initiator system. The results of FTIR and ¹H‐NMR spectra indicated that the compositions of the prepared nanogels are consistent with the designed structure. X‐ray powder diffraction (XRD) and transmission electron microscope (TEM) measurements were used to determine the size of both magnetite and stabilized polymer coated magnetite nanoparticles. The data showed that the mean particle size of synthesized magnetite (Fe₃O₄) nanoparticles was about 10 nm. The diameter of the stabilized polymer coated Fe₃O₄ nanogels ranged from 50 to 250 nm based on polymer type. TEM micrographs proved that nanogels possess the spherical morphology before and after swelling. These nanogels exhibited pH‐induced phase transition due to protonation of AMPS copolymer chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Miscibility and intermolecular hydrogen‐bonding interactions in poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) binary blends

The miscibility and hydrogen bonding interaction in the poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)/poly(4‐vinyl phenol) [P(3HB‐co‐3HH)/PVPh] binary blends were investigated by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The DSC results indicate that P(3HB‐co‐3HH) with 20 mol % 3HH unit content is fully miscible with PVPh, and FTIR studies reveal the existence of hydrogen bonding interaction between the carbonyl groups of P(3HB‐co‐3HH) and the hydroxyl groups of PVPh. The effect of blending of PVPh on the mechanical properties of P(3HB‐co‐3HH) were studied by tensile testing. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Interfacial and mechanical properties of γ‐Fe2O3/segmented polyurethane/poly(vinyl chloride) composites

Segmented polyurethane (SPU)/poly(vinyl chloride) (PVC) blends were particulated with γ‐Fe₂O₃. Interfacial properties of the composite were studied through the adsorption behaviors of SPU and PVC and their blends on γ‐Fe₂O₃ particles surface. Mechanical properties of the composite were measured with dynamic mechanical analysis and tensile test measurements. PVC with functional groups (FPVC), because of strong interactions, showed preferential adsorption on γ‐Fe₂O₃ compared with SPU and PVC. Moreover, the γ‐Fe₂O₃ particles were covered by FPVC in the γ‐Fe₂O₃/SPU/FPVC composite. The adsorption layer of FPVC protected SPU from catalytic degradation by γ‐Fe₂O₃, resulting in increasing hydrolytic stability for SPU. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3030–3035, 2001     

Miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(vinyl acetate) blends

The miscibility and crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (P(HB‐co‐HV))/poly(vinyl acetate) (PVAc) blends have been investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PVAc blends were miscible in the melt over the whole compositions. Thus the blend exhibited a single glass transition temperature (T_g), which increased with increasing PVAc composition. The spherulitic morphologies of P(HB‐co‐HV)/PVAc blends indicated that the PVAc was predominantly segregated into P(HB‐co‐HV) interlamellar or interfibrillar regions during P(HB‐co‐HV) crystallization because of the volume‐filled spherulites. As to the crystallization kinetics study, it was found that the overall crystallization and crystal growth rates decreased with the addition of PVAc. The kinetics retardation was primarily attributed to the reduction of chain mobility and dilution of P(HB‐co‐HV) upon mixing with higher T_g PVAc. The overall crystallization rate was predominantly governed by the spherulitic growth rate and promoted by the samples treated with the quenched state because of the higher nucleation density. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 980–988, 2006     

Miscibility and crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ poly(methyl methacrylate) blends

The miscibility and crystallization kinetics of the blends of random poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(HB‐co‐HV)] copolymer and poly(methyl methacrylate) (PMMA) were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that P(HB‐co‐HV)/PMMA blends were miscible in the melt. Thus the single glass‐transition temperature (T_g) of the blends within the whole composition range suggests that P(HB‐co‐HV) and PMMA were totally miscible for the miscible blends. The equilibrium melting point (T°_m) of P(HB‐co‐HV) in the P(HB‐co‐HV)/PMMA blends decreased with increasing PMMA. The T°_m depression supports the miscibility of the blends. With respect to the results of crystallization kinetics, it was found that both the spherulitic growth rate and the overall crystallization rate decreased with the addition of PMMA. The kinetics retardation was attributed to the decrease in P(HB‐co‐HV) molecular mobility and dilution of P(HB‐co‐HV) concentration resulting from the addition of PMMA, which has a higher T_g. According to secondary nucleation theory, the kinetics of spherulitic crystallization of P(HB‐co‐HV) in the blends was analyzed in the studied temperature range. The crystallizations of P(HB‐co‐HV) in P(HB‐co‐HV)/PMMA blends were assigned to n = 4, regime III growth process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3595–3603, 2004     

Thermal and morphological studies on γ‐Fe2O3 polystyrene composites and the affect of additives

γ‐Fe₂O₃polystyrene (PS) composite films were prepared by a gel‐casting technique to obtain monodisperse composite films. To understand the effect of additives on the prepared composite films, additives such as rice husk ash and thiourea were made to disperse into the PS matrix. The as‐prepared γ‐Fe₂O₃ PS composite films, along with their additives, were subjected to characterization and study by X‐ray diffraction, scanning electron microscopy, thermal, IR, and dielectric measurement techniques. These studies showed monodisperse and chemically homogenous composite films with an increase in thermal behavior. An interesting self‐assembly of rod‐like nanoparticles of γ‐Fe₂O₃ particles into the polymer matrix, which formed spherical packets, was observed for the γ‐Fe₂O₃PS composite film. The electrical behavior of these films was interesting, as some showed conduction whereas others showed an increase in dielectric behavior. This nature was explained by the dielectric measurements. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 778–788, 2004     

Effect of orotic acid as a nucleating agent on the crystallization of bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) copolymers

The kinetics of crystallization induced by orotic acid (OA) and boron nitride (BN) as nucleating agents were investigated for bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)s (P(HB‐co‐HH)s) containing from 0 to 18% HH monomer units. The nucleation efficiency of these two chemicals was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that both orotic acid and boron nitride are able to nucleate the crystallization of PHB. In the case of P(HB‐co‐HH) copolymers, orotic acid showed an outstanding nucleating effect. The comparison of half‐crystallization times shows that for P(HB‐co‐10% HH), the crystallization initiated by orotic acid is more than three time faster than the one induced by boron nitride (t_1/2BN/t_1/2OA(60°C) = 3.7 and t_1/2BN/t_1/2OA(90°C) = 4.5). According to the fact that orotic acid is a biodegradable, biocompatible and a nontoxic chemical, this nucleating agent is a promising solution for PHAs used in medical applications such as implants. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

In situ injectable poly(γ‐glutamic acid) based biohydrogel formed by enzymatic crosslinking

Enzymatic crosslinking was developed to prepare in situ forming poly(γ‐glutamic acid) (γ‐PGA) based hydrogel in this study. First, the precursor of poly(γ‐glutamic acid)–tyramine (γ‐PGA–Ty) was synthesized through the reaction of carboxyl groups from a γ‐PGA backbone with tyramine. The structure of the grafted precursor was confirmed by ¹H‐NMR and Fourier transform infrared spectroscopy. After that, the crosslinking of the phenol‐containing γ‐PGA–Ty precursor was triggered by horseradish peroxidase in the presence of H₂O₂; this resulted in the formation of the γ‐PGA–Ty hydrogels. The equilibrium water content, morphology, enzymatic degradation rate, and mechanical properties of the hydrogels were characterized in detail. The data revealed that the well‐interconnected hydrogels had tunable water contents, mechanical properties, and degradability through adjustments of the composition. Furthermore, cell experiments proved the biocompatibility of the hydrogels by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay. These characteristics provide an opportunity for the in situ formation of injectable biohydrogels as potential candidates in cell encapsulation and drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42301.     

Novel carboxyl functional spherical electromagnetic polypyrrole nanocomposite polymer particles with good magnetic and conducting properties

Magnetic conducting nanoparticles with reactive functional groups are attractive materials for applications in electromagnetic interference shielding, magneto‐optical storage, biomedical sensing, gas and humidity sensors, flexible electronics etc. The objective of this work was to prepare carboxyl functionalized polypyrrole (PPy) nanocomposite particles having good magnetic properties. Electromagnetic PPy nanostructures, abbreviated as PPy/γ‐Fe₂O₃, were first prepared by a chemical one‐step method. In this reaction process FeCl₃ is used as an oxidant for the polymerization of pyrrole and as a source of Fe³⁺ for the formation of γ‐Fe₂O₃. The formation of γ‐Fe₂O₃ is also aided by the initial presence of Fe²⁺, and p‐toluenesulfonic acid (p‐TSA) acted as a dopant. The effects of different stabilizers on the stability and morphology of PPy/γ‐Fe₂O₃ particles were evaluated. The presence of citric acid/sodium dodecyl sulfate during chemical oxidative polymerization produced a relatively stable PPy/γ‐Fe₂O₃ colloidal emulsion. PPy/γ‐Fe₂O₃/poly(methylmethacrylate‐methacrylic acid) (PPy/γ‐Fe₂O₃/P(MMA‐MAA)) nanocomposite polymer particles were then prepared by the seeded copolymerization of MMA and MAA in the presence of magnetic PPy/γ‐Fe₂O₃ nanocomposite seed particles. The structure and morphology of the prepared nanocomposites were confirmed by different instrumental techniques such as Fourier transform IR spectroscopy, UV?visible spectroscopy, electron micrographs, XRD and X‐ray photoelectron spectroscopy. The electrical and magnetic properties were also investigated. The carboxyl functional electromagnetic PPy nanocomposite polymer particles should be useful for the immobilization of drugs or biomolecules to design electrically stimulated drug delivery systems for modulating the activities of nerve, cardiac, skeletal muscle and bone cells. © 2016 Society of Chemical Industry     

Preparation of poly(butyl methacrylate)/γ‐Al2O3 nanocomposites via ultrasonic irradiation

A new technique (ultrasonic irradiation) has been employed to prepare poly(n‐butyl methacrylate) PBMA/γ‐Al₂O₃ nanocomposites, taking advantages of the multiple effects of ultrasonic irradiation, such as dispersion, pulverization and activation. When subjected to ultrasonic irradiation, n‐butyl methacrylate (BMA) is polymerized to form poly(n‐butyl methacrylate) (PBMA) latex without any chemical initiators, and the monomer conversion reaches 72.5% in 25 min. At an appropriate pH, surfactant bilayers are formed through electrostatic interactions between γ‐Al₂O₃ nanoparticles and the anionic surfactant sodium dodecyl sulfate (SDS), which adsorb BMA. After ultrasonic induced polymerization of BMA in the presence of nanoparticles of γ‐Al₂O₃, the γ‐Al₂O₃ nanoparticles are encapsulated by PBMA shells formed. The influence of factors such as pH, surfactant concentration and the nanoparticle content is investigated. The FTIR spectra show that there are still polymers tightly adsorbed by nanoparticles even after extraction by acetone for 72 h. The difference observed in the XPS spectra of nanocomposite residues and the pure γ‐Al₂O₃ nanoparticles may indicate some interactions between γ‐Al₂O₃ nanoparticles and the PBMA matrix. Furthermore, the feasibility of SDS bilayer formation and encapsulating polymerization is proven by XPS characterization. © 2001 Society of Chemical Industry     

Studies on γ‐Fe2O3–high‐density polyethylene composites and their additives

γ‐Fe₂O₃–high‐density polyethylene (HDPE) composite films are prepared by a gel‐casting technique. To understand the effect of additives, rice husk ash and thiourea are made to disperse in the HDPE matrix to obtain the composite films with additives. The as‐prepared γ‐Fe₂O₃–HDPE composite films with their additives are subjected to characterization and study through X‐ray diffraction, thermal, scanning electron microscopy, and dielectric measurements. The results are qualitatively treated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1527–1533, 2004     

Preparation and characterization of polystyrene/titanium dioxide composite particles containing organic ultraviolet‐stabilizer groups

Polystyrene/titanium dioxide (TiO₂) composite particles containing organic ultraviolet (UV)‐stabilizer groups were prepared by the emulsion copolymerization of styrene and 2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy)benzophenone with sodium sulfopropyl lauryl maleate as a surfactant in the presence of rutile TiO₂ modified with 3‐(trimethoxysilyl) propyl methacrylate, and the product was poly[styrene‐co‐sodium sulfopropyl lauryl maleate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy) benzophenone] [poly(St‐co‐M12‐co‐BPMA)]/TiO₂ composite particles. The structures of the composite particles were characterized with Fourier transform infrared spectroscopy, ultraviolet–visible (UV–vis) absorption spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The Fourier transform infrared and UV–vis measurements showed that poly(St‐co‐M12‐co‐BPMA) was grafted from the surface of TiO₂, and this copolymer possessed a high absorbance capacity for UV light, which is very important for improving the UV resistance of polystyrene. The thermogravimetric analysis measurements indicated that the percentage of grafting and the grafting efficiency could reach 513.9 and 59.9%, respectively. The differential scanning calorimetry measurement indicated that the glass‐transition temperature of the poly(St‐co‐M12‐co‐BPMA)/TiO₂ composite particles was higher than that of poly (St‐co‐M12‐co‐BPMA).These research results are very important for preparing polystyrene with high UV resistance. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Polymer/metal interpenetrating phase composites prepared via γ‐ray initiated in‐situ emulsion polymerization

The poly(methylmethacrylate)/metal and poly(butylacrylate‐co‐styrene)/metal interpenetrating phase composites (IPCs) were prepared via γ‐ray irradiation in‐situ bulk and emulsion polymerization, respectively. The monomers were first introduced into open‐cell aluminum foam and aluminum alloy foam and were in‐situ polymerized by γ‐ray irradiation at room temperature. The characterization and compressive test results showed that this method expands the variety of the polymer component resulting in a useful range of physical properties of the IPCs, such as density and porosity. The PMMA/metal IPC has a high polymer filling ratio, modulus and exhibits a similar compressive behavior to that of PMMA. On the other hand, the P(BA‐co‐St)/metal IPC has a relatively low polymer filling ratio and its compressive behavior is similar to that of metal foam matrix, but it has wider plastic plateau than the component metal foams, like the case of metal foam filled with rubber. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Synthesis and characterization of novel poly(γ‐benzyl‐L‐glutamate) derivatives tailored for the preparation of nanoparticles of pharmaceutical interest

Four poly(γ‐benzyl‐L ‐glutamate) (PBLG) derivatives bearing at one end specific groups were synthesized by ring‐opening polymerization of the corresponding γ‐benzyl‐L ‐glutamate N‐carboxyanhydride using different amine‐terminated initiators. These moieties were chosen to introduce, on demand, specific functionalities in nanoparticles of pharmaceutical interest. The PBLG and PBLG derivatives were characterized by ¹H NMR, viscosimetry, Fourier transform infrared spectroscopy and differential scanning calorimetry. Nanoparticles smaller than 100 nm in diameter could be easily prepared from these PBLG derivatives by slight modification of a known nanoprecipitation technique. Copyright © 2006 Society of Chemical Industry     

Gold deposition on Fe3O4/(co)Poly(N‐octadecyl methacrylate) hybrid particles to obtain nanocomposites With ternary intrinsic features

Here, nanocomposite particles with three domains including magnetite nanoparticles, poly(N‐octadecyl methacrylate) (PODMA) or poly(N‐octadecyl methacrylate‐co‐1‐vinylimidazole) (P(ODMA‐co‐VIMZ)), and gold nanoparticles were prepared. Fe₃O₄ nanoparticles with narrow particle size distribution were prepared through a synthetic route in an organic phase in order to achieve good control of the size and size distribution and prevent their aggregation during their preparation. These magnetite nanoparticles, ～ 5 nm in size, were then encapsulated and well‐dispersed in PODMA and P(ODMA‐co‐VIMZ) matrices via a miniemulsion polymerization process to obtain the corresponding nanocomposite particles. The results revealed that Fe₃O₄ nanoparticles were encapsulated and did not migrate towards the monomer/water interface during polymerization. The resulting latex was used as a precursor for the adsorption of Au³⁺ ions on the surface of the polymeric particles and subsequent reduction to produce Fe₃O₄/P(ODMA‐co‐VIMZ)/Au nanocomposite particles. The morphology of the particles from each step was fully characterized by TEM and AFM, and the results of DLS analysis showed their size and size distribution. Measurement of magnetic properties illustrated the superparamagnetic characteristic of the products and it was observed that the encapsulation process and deposition of gold had no effect on the magnetic properties of the resulting particles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013