基于蓝牙的个人局域网（PAN）的设计

为了更好地满足所有移动计算机和通讯设备的通讯需要，蓝牙特别兴趣小组(SIG)提出了一个新的概念——蓝牙个人区域网(Personal Area Networking)。本文分析了蓝牙个人区域网(PAN)的原理，同时提出基于蓝牙模块的蓝牙个人区域网的设计方案。     

基于蓝牙的个人局域网(PAN)的设计

通信技术迅速发展,为了更好地满足所有移动计算机和通讯设备的通讯需要,蓝牙特别兴趣小组(SIG)提出了一个新的概念———蓝牙个人区域网(Personal Area Networking)。分析了蓝牙个人区域网(PAN)的原理,同时提出基于蓝牙模块的蓝牙个人区域网的设计方案(包括协议的实现,数据的转发,模块的选择,整体的设计等)。     

要重视对体域网（BAN）的研究

介绍了体域网（BAN）的应用,分析了体域网（BAN）面临的挑战,预测了体域网（BAN）的市场发展前景。     

无线体域网组网及管理研究综述

通信技术的发展、生理传感技术的进步和日益增长的人体生理信息跟踪需求等催生了无线体域网（Wireless Body Area Network）,WBAN旨在提供实时的、无处不在的人体监测来执行独立的早期预测、诊断和身体跟踪响应的护理,并日渐成为研究和应用的热点。作为传感器网络的一个分支,其日渐成为研究的重点。随着WBAN在人类日常生活中的重要性日趋突出,专用于无线体域网(WBAN)的标准IEEE802.15.6于2012年颁布。主要针对多个体域网网间组网及其管理进行研究,同时对体域网间组网及管理的研究现状进行分析和总结。最后,分析了无线体域网组网及管理需要解决的问题和未来研究的方向。     

体域网中一种基于无线信道特征的密钥生成方法研究

无线体域网是以人体为中心的无线网络,受其有限的资源和计算能力的约束,如何保证无线体域网通信节点间共享密钥是当前面临的一大挑战。提出了一种基于超宽带无线体域网信道特征的密钥生成机制,利用超宽带信道多径相对时延与平均时延的差值量化生成密钥,降低了密钥不匹配率,同时引入辅助节点,提高了密钥生成速率。仿真结果表明,该机制能够在兼顾密钥一致性的前提下,获得较高的密钥生成速率并保证密钥的安全性。     

无线体域网抗CMMB信号干扰方法研究

无线体域网广泛应用于远程医疗、保健等方面,但我国分配用于生物医疗的专用无线频段和部分广播电视频段相重叠,因而无线体域网设备将受到移动多媒体广播信号干扰。提出了将无线个域网的DS-PHY应用到无线体域网的技术方案,并对其在移动多媒体广播信号干扰背景下进行了仿真,结果表明该方案具有较好的抗干扰性能,可以为我国无线体域网的标准化工作提供重要技术参考。     

一种多等级无线体域网服务质量方法

提出一种基于等级的无线体域网(WBAN)QoS框架,将WBAN中的QoS分为3个等级。利用IEEE802.15.4的信标模式中基于时隙的CSMA/CA机制、保障时隙以及传感器节点内部的流量区分实现了QoS框架。仿真结果表明提出的QoS框架可以满足WBAN对QoS的需求。     

一种应用于WBAN的动态自适应网络研究

基于WBAN的技术尚不成熟,提出一种新型WBAN技术方案,将HBC技术与MICS频段结合应用到WBAN中.考虑到体域网中体内节点的能耗约束性,提出了一种应用于WBAN的新型网络,即具有自适应性的基于中继的两跳星型网络;针对WBAN中节点生存周期的重要性,提出一种低能耗的MAC协议——基于TDMA的中继MAC协议.该方案的提出,能够满足WBAN对安全、能耗、可靠性等服务质量(QoS)的要求,且较好地改善了体内节点的网络生存期.     

无线体域网资源分配研究综述

无线体域网旨在提供实时的、无处不在的人体监测来执行独立的早期预测、诊断和身体跟踪响应的护理,并日渐成为研究和应用的热点。随着WBAN在人类日常生活中的重要性日趋突出,专用于无线体域网的标准IEEE802.15.6于2012年颁布。本文主要针对多个体域网网间和单个体域网内部的资源分配进行研究,考虑WBAN的异质性以及传感器节点的异质性,同时对体域网资源分配的研究现状和不足进行分析和总结。最后,分析了无线体域网资源分配需要解决的问题和未来研究的方向。     

一种新型的能量受限无线体域网路由协议

针对无线体域网这种新型的应用场景,设计了一种新型的能量受限无线体域网路由协议EE-DSR。该协议在DSR路由基础上,综合考虑了无线体域网中信道变化、节点业务类型和节点服务时间等特殊应用,有效地节省了网络传输的能量消耗,从而较好地延长了网络生存期。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.