Molecularly imprinted adsorbents for positional isomer separation.

2,4-Dihydroxybenzophenone (2,4-DHB) imprinted polymers were synthesized by surface imprinting technique, using allyl alcohol as the functional monomer. The polymers showed a very high selectivity for 2,4-DHB when compared with various positional isomers such as 2-HB, 2,2'-DHB, 4,4'-DHIB and 4,4'-DMB. Solvents were found to affect the selectivity as well as sorption capacity in the case of surface imprinted polymers. The selectivities decreased drastically when the imprint cavity was blocked. This validated the importance of the cavity and the rebinding interactions in governing the selectivity in the case of MIPs. The surface imprinted polymers also showed a high selectivity under non-equilibrium conditions thereby making them suitable adsorbents for industrial separations.     

Fundamental characteristics of synthetic adsorbents intended for industrial chromatographic separations

With the aim of obtaining comprehensive information on the selection of synthetic adsorbents for industrial applications, effect of pore and chemical structure of industrial-grade synthetic adsorbents on adsorption capacity of several pharmaceutical compounds was investigated. For relatively low molecular mass compounds, such as cephalexin, berberine chloride and tetracycline hydrochloride, surface area per unit volume of polystyrenic adsorbents dominated the equilibrium adsorption capacity. On the contrary, effect of pore size of the polystyrenic adsorbents on the equilibrium adsorption capacity was observed for relatively high molecular mass compounds, such as rifampicin, Vitamin B12 and insulin. Polystyrenic adsorbent with high surface area and small pore size showed small adsorption capacity for relatively high molecular mass compounds, whereas polystyrenic adsorbent with relatively small surface area but with large pore size showed large adsorption capacity. Effect of chemical structure on the equilibrium adsorption capacity of several pharmaceutical compounds was also studied among polystyrenic, modified polystyrenic and polymethacrylic adsorbents. The modified polystyrenic adsorbent showed larger adsorption capacity for all compounds tested in this study due to enhanced hydrophobicity. The polymethacrylic adsorbent possessed high adsorption capacity for rifampicin and insulin, but it showed lower adsorption capacity for the other compounds studied. This result may be attributed to hydrogen bonding playing major role for the adsorption of compounds on polymethacrylic adsorbent. Furthermore, column adsorption experiments were operated to estimate the effect of pore characteristics of the polystyrenic adsorbents on dynamic adsorption behavior, and it is found that both surface area and pore size of the polystyrenic adsorbents significantly affect the dynamic adsorption capacity as well as flow rate.     

New classes of selective separations exploiting magnetic adsorbents

1. Download : Download high-res image (277KB)
2. Download : Download full-size image

     

Metal–organic frameworks as O2-selective adsorbents for air separations

Oxygen is a critical gas in numerous industries and is produced globally on a gigatonne scale, primarily through energy-intensive cryogenic distillation of air. The realization of large-scale adsorption-based air separations could enable a significant reduction in associated worldwide energy consumption and would constitute an important component of broader efforts to combat climate change. Certain small-scale air separations are carried out using N₂-selective adsorbents, although the low capacities, poor selectivities, and high regeneration energies associated with these materials limit the extent of their usage. In contrast, the realization of O₂-selective adsorbents may facilitate more widespread adoption of adsorptive air separations, which could enable the decentralization of O₂ production and utilization and advance new uses for O₂. Here, we present a detailed evaluation of the potential of metal–organic frameworks (MOFs) to serve as O₂-selective adsorbents for air separations. Drawing insights from biological and molecular systems that selectively bind O₂, we survey the field of O₂-selective MOFs, highlighting progress and identifying promising areas for future exploration. As a guide for further research, the importance of moving beyond the traditional evaluation of O₂ adsorption enthalpy, ΔH, is emphasized, and the free energy of O₂ adsorption, ΔG, is discussed as the key metric for understanding and predicting MOF performance under practical conditions. Based on a proof-of-concept assessment of O₂ binding carried out for eight different MOFs using experimentally derived capacities and thermodynamic parameters, we identify two existing materials and one proposed framework with nearly optimal ΔG values for operation under user-defined conditions. While enhancements are still needed in other material properties, the insights from the assessments herein serve as a guide for future materials design and evaluation. Computational approaches based on density functional theory with periodic boundary conditions are also discussed as complementary to experimental efforts, and new predictions enable identification of additional promising MOF systems for investigation.

This Perspective summarizes progress in the development of O₂-selective metal–organic frameworks for adsorptive air separations and identifies key metrics and design considerations toward optimizing material performance for practical applications.     

Tuning the size of supramolecular single‐chain polymer nanoparticles

In this article we further investigate our recently devised method for folding polymer chains into nanoparticles using intramolecular, supramolecular interactions. Specifically, we show a direct relationship between molecular weight of the parent chain and size of the folded nanoparticle. This is investigated both analytically via the separation and subsequent characterization of a polydisperse nanoparticle sample into high and low molecular weight fractions, and by examining a family of poly(norbornenes) deliberately prepared with varying molecular weights. With these polymer nanoparticles in hand their assembly on surfaces is studied where larger structures are formed as a result of the interplay between the movement of the nanoparticles on the surface and the evaporation of solvent. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A study of the effects of column porosity on gradient separations of proteins

The type of the stationary phase for reversed-phase liquid chromatography significantly affects the sample elution. Hydrodynamic properties, efficiency and gradient elution of proteins were investigated on five commercial C18 columns with wide-pore totally porous particles, with superficially porous layer particles, non-porous particles and a silica-based monolithic bed. The efficiency in the terms of reduced plate height is higher for low-molecular ethylbenzene than for proteins, but depends on the character of the pores in the individual columns tested. The superficially porous Poroshell and the non-porous Micra columns provide the best efficiency for proteins at high mobile phase flow rates, probably because of similar pore architecture in the stationary phase. The Zorbax column with similar pore architecture as the Poroshell active layer, i.e. narrow pore distribution of wider pores shows better efficiency than the packed column with narrow pores and broad pore distribution. The monolithic column shows lower efficiency for proteins at high flow rates, but it performs better than the broad-pore distribution totally porous particulate columns. Different pore architecture affects also the retention and selectivity for proteins on the individual columns. The retention times on all columns can be predicted using the model for reversed-phase gradient elution developed originally for low-molecular compounds. Consideration of the limited pore volume accessible to the biopolymers has negligible effect on the prediction of retention on the columns packed with non-porous or superficially porous particles, but improves the accuracy of the predicted data for the totally porous columns with broad pore distribution.     

Tertiary phosphine complexes of cyclopentadienylmolybdenum carbonyl halides. Stereoselective syntheses and isomer separations

Pure cis and trans isomers of CpMo(CO)₂(L)X (Cp = η⁵-C₅H₅, L = PPh₃ or PBu₃, X = Br, or I) have been separated by chromatography and characterized by infrared and proton NMR spectroscopy. The reactions of trans-CpMo(CO)₂(L)CH₃ with HgX₂ (X = Cl, Br, I, SCN) afford cis-CpMo(CO)₂(L)X in high yield. Both linkage isomers are obtained in the reaction with Hg(SCN)₂, L = PPh₃. The mercuric halides react with CpMo(CO)₂(L)COCH₃ to form the metalmetal bonded derivatives trans-CpMo(CO)₂(L)HgX. Reactions of CpMo(CO)₂(L)CH₃ or CpMo(CO)₂(L)COCH₃ with bromine or iodine yield the halide complexes CpMo(CO)₂(L)X (X = Br and I, respectively), the product mixtures containing high proportions of the trans isomers.     

Pillar[3]trianglamines: deeper cavity triangular macrocycles for selective hexene isomer separation

The separation of α-olefins and their corresponding isomers continues to be a big challenge for the chemical industry due to their overlapping physical properties and low relative volatility. Herein, pillar[3]trianglamine (P-TA) macrocycles were synthesized for the molecular-sieving-like separation of 1-hexene (1-He) selectively over its positional isomer trans-3-hexene (trans-3-He) in the vapor and liquid state. This allyl-functionalized macrocycle features a deeper cavity compared to the previously reported trianglamine host molecules. Solid–vapor sorption experiments verified the successful separation of 1-He from an equimolar mixture of 1-He and trans-3-He. Single-crystal structures and powder X-ray diffraction patterns suggest that this selective adsorption arises from the formation of a thermodynamically stable host–guest complex between 1-He and P-TA. A reversible transformation between the nonporous guest-free structure and the guest-containing structure shows that 1-He separation can be carried out over multiple cycles without any loss of performance. Significantly, P-TA can separate 1-He directly from a liquid isomeric mixture and thus P-TA modified silica sieves (SBA-15) showed the ability to selectively separate 1-He when utilized as a stationary phase in column chromatography. This capitalizes on the prospects of employing macrocyclic hosts as molecular recognition units in real-life separations for sustainable and energy-efficient industrial practices.

Crystalline allyl-functionalized trianglamine macrocycles (P-TA) that show a pillared-like cavity were successfuly prepared and employed for the robust molecular sieving of 1-He from vapor and liquid (in solution) isomeric mixtures.     

Tuning the size of supramolecular M4L4 tetrahedra by ligand connectivity

Triangular triscatechol ligands are prepared in facile reaction sequences. The catechol units are either bound to the triangular backbone through their 3- or 4-position. With titanium(IV) ions, the ligands form metallosupramolecular M(4)L(4) tetrahedra which are characterized by ESI MS and proton NMR. Quantum-chemical calculations reveal that connectivity at the catechol in the 3-position results in highly condensed structures while attachment in the 4-position affords container molecules providing huge internal cavities.     

Engineering porosity in a chiral heteropolyoxometalate-based framework: the supramolecular effect of benzenetricarboxylic acid

A chiral heteropolyoxometalate-based framework, synthesised using a planar aromatic tri-acid included as a guest, contains partially filled 1D channels and exhibits reversible water sorption capabilities.     

Tuning of the morphology of a riboflavin-melamine equimolar supramolecular assembly by in situ silver nanoparticle formation

Tuning the supramolecular morphology of an equimolar complex of riboflavin and melamine by the in situ formation of different size silver nanoparticles, affecting the photoluminescence property.     

Influence of pristine SWNTs in supramolecular hydrogelation: scaffold for superior peroxidase activity of cytochrome c

The influence of pristine SWNTs in supramolecular hydrogelation of amphiphilic dipeptide carboxylates is delineated. The developed SWNT-nanohybrids with notable mechanical strength act as a scaffold for superior peroxidase activity of cytochrome c in organic media.     

A supramolecular spin crossover Fe(III) complex and its Cr(III) isomer: stabilization of water-chloride cluster within supramolecular host

The metal complexes, [M(Hdammthiol)(2)]Cl·3H(2)O [M = Cr(III) (1), Fe(III) (2)] [where H(2)dammthiol is the thiol form of the ligand, diacetylmonoxime morpholine N-thiohydrazone] were synthesized by metal template reactions of diacetylemonoxime with morpholine N-thiohydrazide in the presence of CrCl(3)·6H(2)O and FeCl(3)·6H(2)O. Both the complexes (1 and 2) were characterized by single crystal X-ray crystallography, spectroscopic (IR and UV-vis), M?ssbauer and TGA analyses. The single crystal X-ray studies of both complexes show that the supramolecular hosts, constructed by the discrete mononuclear complexes, form supramolecular channels along the c-axis which are filled up by water-chloride clusters. In both complexes, the 1D water-chloride chain with chair-like architecture within the supramolecular hosts presents novelty. The magnetic measurement study of Fe(III) complex shows a spin crossover from S = 1/2 at 2.5 K to S = 5/2 at 300 K. At very low temperature, the presence of strong cooperative hydrogen bonding interactions stabilizes the S = 1/2 state.     

Techniques for the automated optimization of HPLC separations

The availability of computer controlled HPLC instrumentation has enabled more systematic approaches to be taken to the optimization of chromatographic separations. Many of these approaches are suitable for automated applications.     

Characterization of buffers for electrokinetic separations

Buffers used in electrophoresis and electrochromatography must have a relatively low ionic strength in order to minimize ohmic heating in the presence of an applied potential. Calculation of pH, ionic strength, and the van Slyke buffer capacity, β, is therefore important. This paper describes thea priori calculation of these parameters for tris buffer made up with either glycine (a zwitterion) or HCl. A quadratic expression for pH, valid over wide ranges, is obtained for both buffer systems. The calculated values of pH, ionic strength, and buffer capacity are shown to agree with experimental results as a function of tris, HCl, and glycine concentrations ranging from 1 to 50 mM. A new parameter, the electrokinetic buffer effectiveness factor, is introduced to characterize buffers being considered for use in electrokinetic systems such as electrochromatography, and is used to determine the appropriate composition ranges for the buffer components.     

Influence of silver nano‐additive amount on the supramolecular structure,porosity, and properties of polyacrylonitrile precursor fibers

This work examines the influence of the amount of silver nanoparticles added to polyacrylonitrile spinning solutions on their rheological properties as well as the structure and properties of the fibers produced. The influence of the amount of silver nanoparticles on the supramolecular structure of nanocomposite polyacrylonitrile precursor fibers, their porosity, as well as thermal and tensile strength properties was determined. The distribution of the nano‐ additive in fiber cross‐sections and on the surface was estimated. It was found that the addition of silver nanoparticles to polyacrylonitrile precursor fibers in an amount of up to 1.5% does not cause a decrease in the susceptibility of the fiber matter to deformation at the drawing stage. The produced fibers were characterized by an increased total volume of pores of 0.35 cm³/g and tenacity of more than 34 cN/tex. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorptive separations for the recovery and purification of biobutanol

A?conceptual adsorption process for the recovery and purification of biobutanol is proposed. Different porous materials are tested on their ability to perform the adsorptive separations relevant to the process. The metal-organic framework ZIF-8, silicalite zeolite and active carbon were compared with respect to their adsorption capacity of 1-butanol dissolved in water, as obtained in static and dynamic conditions by respectively batch and breakthrough measurements at room temperature. Batch experimentation showed that other compounds present in a real ABE fermentation have no significant effect on the adsorption of 1-butanol on ZIF-8. The breakthrough separation of 1-butanol from an aqueous ABE mixture was performed with a ZIF-8 packed column. The desorption of 1-butanol from a saturated ZIF-8 packed column by a stepwise increase of the temperature to 423?K in combination with a purge of a nitrogen gas (60?ml/min) shows that 1-butanol desorbs at low temperature from ZIF-8. Adsorption isotherms of ethanol, 1-butanol and water in liquid phase on the zeolite SAPO-34 were determined by batch adsorption at 298?K. Also the separation of an ethanol/1-butanol mixture and the removal of ethanol from 1-butanol could be achieved with a SAPO-34 packed column. From this experimental work, two materials—ZIF-8 and SAPO-34—thus emerged as suitable adsorbents for the recovery and purification of biobutanol by adsorption.