Electrochemical and in situ SERS spectroelectrochemical investigations of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol monolayers at a silver electrode

Electrochemically anticorrosive behavior of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol (MTTL) self‐assembled monolayers (SAMs) on the silver electrode was studied by means of electrochemical impedance spectroscopy (EIS) and polarization measurements. The promising inhibition effect of the MTTL for silver had been affirmed. Results of surface‐enhanced Raman scattering (SERS) experiments indicated that the MTTL molecule in a tilted orientation was self‐assembled on the silver surface through S⁶ and N² atoms to form monolayers. An in situ electrochemical SERS experiment implied the changes of adsorption fashion of MTTL momolayers on the silver surface with the potential shifted to more negative direction. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of 1,2,4‐triazole on a silver electrode: surface‐enhanced Raman spectroscopy and density functional theory studies

The pH‐dependent surface‐enhanced Raman scattering (SERS) of 1,2,4‐triazole adsorbed on silver electrode and normal Raman (NR) spectra of this compound in the aqueous solutions were investigated. The observed bands in the NR and SERS spectra were assigned with the help of density functional theory calculations for model molecules in the neutral, anionic, and cationic forms and their complexes with silver. The Raman wavenumbers and intensities were computed at the optimized molecular geometry. Vibrational assignments of the SERS and NR spectra are provided by calculated potential energy distributions. The combination of experimental SERS results and density functional theory calculations provide an insight into the molecular structure of adlayers formed by 1,2,4‐triazole on a silver surface at varying pH values and enable the determination of molecular orientation with respect to the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorption of purpald SAMs on silver and gold electrodes: a Raman mapping study

The adsorption modes of 4‐amino‐3‐hydrazino‐5‐mercapto‐1,2,4‐trizole (purpald) self‐assembled monolayers (SAMs) formed on SERS‐active silver and gold electrodes were comparatively studied using surface‐enhanced Raman scattering (SERS), and the self‐assembling procedures were investigated by the Raman mapping technique. Purpald SAMs adopted a titled orientation with S, N2 atoms anchoring to the silver electrode and the  N7H₂ close to the surface, whereas purpald stood up on the gold electrode through S, N5 atoms and with  N8H₂ adjacent to the surface. The density functional theory (DFT) at the level of B3LYP was performed to help explain their different adsorption behaviors on the silver and gold electrodes. Copyright © 2006 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering observation of sulfanilamide on the silver surface

Monolayers of sulfanilamide on metallic surface can serve as an ideal model for understanding the interaction mechanism between the metal and the sulfanilamide molecule. In the present paper, the surface‐enhanced Raman scattering (SERS) technique was employed to obtain the SERS spectra of sulfanilamide monolayers formed on the silver surface under different pH values. Assignments of the spectra were carried out with the aid of density functional theory (DFT) calculations (BLYP/6‐311G). It can be found that the adsorption function of sulfanilamide on the silver surface was influenced by the pH value. The fully protonated sulfanilamide molecule adsorbed on the silver surface through N¹³H₂ group and the benzene ring anchored in a relatively perpendicular manner leading to N⁷H₂ and S¹⁰O₂ groups near the surface, while the completely deprotonated sulfanilamide molecule attached on the silver surface via N⁷H₂ and the benzene ring was perpendicular to, and the N¹³H₂ and S¹⁰O₂ groups were far from the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of 4,4′‐thiobisbenzenethiol on silver surfaces: surface‐enhanced Raman scattering study

Adsorption of 4,4′‐thiobisbenzenethiol (4,4′‐TBBT) on a colloidal silver surface and a roughened silver electrode surface was investigated by means of surface‐enhanced Raman scattering (SERS) for the first time, which indicates that 4,4′‐TBBT is chemisorbed on the colloidal silver surface as dithiolates by losing two H‐atoms of the S H bond, while as monothiolates on the roughened silver electrode. The different orientations of the molecules on both silver surfaces indicate the different adsorption behaviors of 4,4′‐TBBT in the two systems. It is inferred from the SERS signal that the two aromatic rings in 4,4′‐TBBT molecule are parallel to the colloidal silver surface as seen from the disappearance of ν_{C H} band (3054 cm⁻¹), which is a vibrational mode to be used to determine the orientation of a molecule on metals according to the surface selection rule, while on the roughened silver electrode surface they are tilted to the surface as seen from the enhanced signal of ν_{C H}. The orientation of the C‐S bond is tilted with respect to the silver surface in both cases as inferred from the strong enhancement of the ν_{C S}. SERS spectra of 4,4′‐TBBT on the roughened silver electrode with different applied potentials reveal that the enhancement of 4,4′‐TBBT on the roughened silver electrode surface may be related to the chemical mechanism (CM). More importantly, the adsorption of 4,4′‐TBBT on the silver electrode is expected to be useful to covalently adsorb metal nanoparticles through the free S H bond to form two‐ or three‐ dimensional nanostructures. Copyright © 2007 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering studies of N‐acetylalanine monolayers self‐assembled on a silver surface

Monolayers of N‐acetylalanine on a metallic surface can serve as a biocompatible functional interface to construct biosensors. In the present paper, the surface‐enhanced Raman scattering (SERS) spectra of N‐acetylalanine monolayers self‐assembled on a silver surface under different pH were recorded. Assignments of the obtained spectra were carried out by density functional theory (DFT) calculations (BLYP/6‐311G). On the basis of the SERS effect, the nature of adsorption of N‐acetylalanine on a silver surface was deduced. It can be concluded that the fully protonated N‐acetylalanine is adsorbed on the silver surface via the imine group together with the carboxylate group, while it anchored onto the surface not only through both the imine and the carboxylate groups but also through the amide group after being completely deprotonated in the basic solution. Copyright © 2007 John Wiley & Sons, Ltd.     

介质pH对银基上4-甲基-4H-3-巯基-1,2,4-三氮唑成膜结构和缓蚀性能影响的SERS和电化学研究

在不同pH介质中,缓蚀试剂4-甲基-4H-3-巯基-1,2,4-三氮唑(4-MTTL)都能在银基底上形成自组装膜。SERS光谱表明:当pH=3时,4-MTTL分子是以硫醇式,通过两个氮原子为吸附位点,以较平躺方式在银表面构筑自组装膜;当介质为pH=7和pH=11时,4-MTTL以硫醇式,通过氮和硫原子为吸附位点倾斜或垂直方式作用于银表面。由于后者的吸附方式比前者更为垂直于表面,所以形成的膜中分子排列更为致密。电化学极化实验也表明,在pH=3的条件下,形成的4-MTTL单层有更正的腐蚀电位;在pH=11时,构筑的膜缓蚀能力强于pH=7的。并由电化学交流阻抗数据解析了相应的缓蚀机理。     

Micro‐Raman investigations of early stage silver corrosion products occurring in sulfur containing atmospheres

Silver is a soft, lustrous metal with the highest electrical and thermal conductivity. Due to these properties, it has many applications as a precious material both in pure and alloy form (ornaments, jewellery, utensils, coins), but also in several technological fields, considering silver compounds (e.g. photography, electric and electronic industry). As a consequence of this, silver and its by‐products are regularly exposed to different atmospheres where a wide spectrum of agents (e.g. moisture, temperature, air pollutants, UV light) may cause metal corrosion and alteration of their surface characteristics and properties. The aim of this research is to deepen the potential and applicability of micro‐Raman spectroscopy as a surface‐sensitive technique to investigate the initial steps of atmospheric corrosion throughout the identification of surface chemical reactions and corrosion products formed on silver substrates. In a previous study, micro‐Raman analysis was carried out on pure silver powder compounds, selected among the most expected corrosion products occurring on silver substrates, in order to optimize experimental conditions and to obtain reference spectra ^[1]. Subsequently highly pure silver samples were exposed for 24 h to different controlled laboratory atmospheres (synthetic air, relative humidity, SO₂, H₂S), particularly focusing on sulfur containing gases, and the resulting surface reactions. The experiments highlight micro‐Raman spectroscopy as a highly surface‐sensitive technique enabling to detect both adsorbed chemical species and crystalline corrosion products of only several monolayers of thickness. Furthermore, these investigations could show the trends of primary and secondary corrosion mechanisms and their mutual interaction occurring on silver substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

Isomerization and rearrangement of (E)‐ and (Z)‐phenylhydrazones of 3‐benzoyl‐5‐phenyl‐1,2,4‐oxadiazole: evidence for a ‘new’ type of acid‐catalysis by copper(II) salts in mononuclear rearrangement of heterocycles

A kinetic investigation in methanol of the title reaction has evidenced the occurrence of two processes: the 1‐ E 1‐ Z isomerization and the rearrangement of the (Z)‐isomer into the relevant 4‐benzoylamino‐2,5‐diphenyl‐1,2,3‐triazole ( 1‐ Z → T ). The latter reaction is in line with the ability of the (Z)‐phenylhydrazones of 3‐benzoyl‐1,2,4‐oxadiazoles to undergo the so called mononuclear rearrangement of heterocycles (MRH). The occurrence of both the examined reactions is dependent on a Lewis‐acid‐catalysis. The obtained results have shown the possibility of a ‘new’ type of acid‐catalysis (bifunctional catalysis by Lewis salts) in the MRH. This catalysis operates through a completely different mechanism with respect to the one recently observed, and deeply investigated, in the presence of protic acids for the (Z)‐phenylhydrazone of 5‐amino‐3‐benzoyl‐1,2,4‐oxadiazole, in both dioxane/water and toluene, for which the catalytic process was dependent on the protonation of N(4) ring‐nitrogen of the 1,2,4‐oxadiazole. As a matter of fact, the copper salts seem able to interact with the >C?N? NH? C₆H₅ moiety, yielding adducts which, in some cases, are prone to both isomerize and rearrange. Therefore, a similar behaviour in some manner parallel to that already observed in benzene in the presence of aliphatic amines (base‐catalysis) has been evidenced. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of Pb2+ on L‐glutathione monolayers on a silver surface investigated by surface‐enhanced Raman scattering spectroscopy

Surface‐enhanced Raman scattering (SERS) spectroscopy was applied to observe reduced L ‐glutathione [L‐Glut(R)] molecules self‐assembled on a silver surface and the effect of Pb²⁺ on them. The adsorption structure suggests that the mercapto group of the L‐Glut(R) molecule is covalently bonded to the silver surface along with the imine group, amino group and entire carboxyl group in a perpendicular orientation after self‐reorganization. Results of SERS experiment show that Pb²⁺ influences the structure of L‐glutathione monolayers as a result of the binding reaction possibly occurring between Pb²⁺ and the carboxyl and the amino groups. Copyright © 2009 John Wiley & Sons, Ltd.     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

Vibrational characterization of L‐valine phosphonate dipeptides: FT‐IR,FT‐RS,and SERS spectroscopy studies and DFT calculations

Four L ‐valine (L ‐Val) phosphonate dipeptides that are potent inhibitors of zinc metalloproteases, namely, L ‐Val‐C(Me)₂‐PO₃H₂ (V1), L ‐Val‐CH(iP)‐PO₃H₂ (V2), L ‐Val‐CH(iB)‐PO₃H₂ (V3), and L ‐Val‐C(Me)(iP)‐PO₃H₂ (V4), are studied by Fourier‐transform infrared (FT‐IR) spectroscopy, Fourier‐transform Raman spectroscopy (FT‐RS), and surface‐enhanced Raman scattering (SERS). The band assignment (wavenumbers and intensities) is made based on (B3LYP/6‐311 + + G**) calculations. Comparison of theoretical FT‐IR and FT‐RS spectra with those of SERS allows to obtain information on the orientation of these dipeptides as well as specific‐competitive interactions of their functionalities with the silver substrate. More specifically, V1 and V4 appear to interact with the silver substrate mainly via a  C_sgCH₃ moiety localized at the  N_amideC_sg(CH₃)P molecular fragment. In addition, the  POH and isopropyl units of V4 assist in the adsorption process of this molecule. In contrast, the  C_αNH₂ and  PO₃H⁻ groups of V2 and V3 interact with the silver nanoparticles, whereas their isopropyl and isobutyl fragments seem to be repelled by the silver substrate (except for the  CH₂  of V3), similar to the  C_β(CH₃)₂ fragment of L ‐Val for all L ‐Val phosphonate dipeptides investigated in this work. The adsorption mechanism of these molecules onto the colloidal silver surface is also affected by amide bond behavior. Copyright © 2010 John Wiley & Sons, Ltd.     

Self‐assembled monolayers of mercaptosuccinic acid monolayers on silver and gold surfaces designed for protein binding. Part II: vibrational spectroscopy studies on cytochrome c immobilization

An attempt has been made for using MSA‐modified electrodes as linkage monolayers for electrostatic and covalent binding of cytochrome c (Cc). For MSA monolayers grown from an aqueous solution on Ag, attachment of Cc in its native state is proved in the case of covalent bonding. Electrostatic immobilization of Cc at pH 7 results in presence of at least some amount of Fe²⁺ high‐spin configuration and/or Fe³⁺ oxidation state. Native protein Fe²⁺ low‐spin state of Cc is observed after applying a negative potential to the Ag electrode. The influence of the solvent used for the preparation of the MSA monolayer and thiol surface coverage of the Ag surface was studied. It was shown that the key factor to obtain the native structure of Cc is the successful blocking of the metal surface by the MSA linking layer. IRRAS measurements of MSA on monocrystalline gold (111) at neutral pH confirm the successful electrostatic Cc immobilization, which preserves the Fe²⁺ oxidation state of the chromophore on this substrate. Copyright © 2007 John Wiley & Sons, Ltd.     

Immobilization of galactose oxidase on self‐assembled monolayers of thiols on Au and Ag surfaces

Galactose oxidase (GalOD) was immobilized on self‐assembled monolayers of thiols on silver and gold surfaces using trans‐stilbene (4,4′‐diisothiocyanate)‐2,2′disulphonic acid (DIDS) as the bridging compound. DIDS is the symmetrical bifunctional reagent that reacted with the amine moiety of the thiol and with primary amino groups of enzyme. The Raman measurement revealed that onto cysteamine‐modified silver and gold electrodes, bands corresponding to the galactose oxidase (about 694, 1076, 1274 cm^—1 on Au and 762, 1058, 1274 cm^–1 on Ag ) appeared and clearly demonstrated its immobilization onto Au and Ag surfaces. Simultaneously, we have also observed changes in the ratio of trans–gauche conformers of adsorbed cysteamine molecules. Layers revealing high content of trans conformer are transformed into layers composed mainly of cysteamine molecule in gauche conformation after galactose oxidase adsorption. These observations deliver a strong support for enzyme immobilization on cysteamine‐modified gold and silver surfaces. The surface plasmon resonance experiment gave a surface coverage of ~8.4 × 10⁷ g/cm² for gold electrode modified cysteamine using DIDS chemistry and 1.1 × 10⁷ g/cm² for the cysteamine only modified gold substrate and demonstrated that galactose oxidase layers immobilized with DIDS coupling reagent are quite stable and cannot be easily removed from the surface by treatment with a buffer solution. The surface plasmon resonance results indicated that in this method, a multilayer of galactose oxidase have been immobilized. Our new method of covalent attachment of enzymes seems to be quite promising as a new way of manufacturing biosensors. Copyright © 2012 John Wiley & Sons, Ltd.     

Multiple weak interaction‐assisted SERS detection platform for triadimefon

In this paper, a surface enhanced Raman spectra (SERS) detection platform for the widely used pesticide of triadimefon (TDF) is described. TDF is difficult to connect to the gold/silver SERS substrate, but the optical properties of the probe molecule 4‐mercaptobenzoic acid (4‐MBA), including the peak intensity and the peak position, are easily altered by the multiple weak interaction‐assisted SERS detection platform. The limit of detection (LOD) of this method is 1.0 × 10^‐9 M, and the linear range is from 1.0 × 10^‐6 M to 1.0 × 10^‐9 M. The linear region is from 1.0 × 10^‐6 M to 1.0 × 10^‐9 M, described by the equation y = 884.01x + 2.24 with a correlation coefficient (R²) of 0.9990. Interference of foreign metal ions with higher concentrations than common mineral water is too weak to the determination. Furthermore, physical insights into the phenomena and the detection mechanism were obtained and investigated theoretically. The preferential conformation of the complex and reduced density gradient (RDG) calculation results indicated that the interactions between TDF and 4‐MBA consisted of multiple weak interactions through two hydrogen bonds and one van der Waals interaction. The intermolecular interaction was negative for the charge transfer from the SERS substrate to the probe molecule; thus, the peak intensity decreased. TDF interacts directly with the carboxyl of the probe molecule and consequently has an effect on the ring vibrations. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of an aliphatic spacer group on the adsorption mechanism on the colloidal silver surface of L‐proline phosphonodipeptides

A comparative study of molecular structures of five L ‐proline (L ‐Pro) phosphonodipeptides: L ‐Pro‐NH‐C(Me,Me)‐PO₃H₂ (P1), L ‐Pro‐NH‐C(Me,iPr)‐PO₃H₂ (P2), L ‐Pro‐L ‐NH‐CH(iBu)‐PO₃H₂ (P3), L ‐Pro‐L ‐NH‐CH(PA)‐PO₃H₂ (P4) and L ‐Pro‐L ‐NH‐CH(BA)‐PO₃H₂ (P5) has been carried out using Raman and absorption infrared techniques of molecular spectroscopy. The interpretation of the obtained spectra has been supported by density functional theory calculations (DFT) at the B3LYP; 6–31 + + G** level using Gaussian 2003 software. The surface‐enhanced Raman scattering (SERS) on Ag‐sol in aqueous solutions of these phosphonopeptides has also been investigated. The surface geometry of these molecules on a silver colloidal surface has been determined by observing the position and relative intensity changes of the Pro ring, amide, phosphonate and so‐called spacer (−R) groups vibrations of the enhanced bands in their SERS spectra. Results show that P4 and P5 adsorb onto the silver as anionic molecules mainly via the amide bond (∼1630, ∼1533, ∼1248, ∼800 and ∼565 cm⁻¹), Pro ring (∼956, ∼907 and ∼876 cm⁻¹) and carboxylate group (∼1395 and ∼909 cm⁻¹). Coadsorption of the imine nitrogen atom and PO group with the silver surface, possibly by formation of a weaker interaction with the metal, is also suggested by the enhancement of the bands at 1158 and 1248 cm⁻¹. P1, P2 and P3 show two orientations of their main chain on the silver surface resulting from different interactions of the  C CH₃,  NH and  CONH fragments with this surface. Bonding to the Ag surface occurs mainly through the imino atom (1166 cm⁻¹) for P2, while for P1 and P3 it occurs via the methyl group(s) (1194–1208 cm⁻¹). The amide group functionality (CONH) is practically not involved in the adsorption process for P1 and P2, whereas the C_s P bonds do assist in the adsorption. Copyright © 2008 John Wiley & Sons, Ltd.     

Gas‐phase studies of copper catalyzed aerobic cross coupling of thiol esters and arylboronic acids

Electrospray ionization/mass spectrometry (ESI‐MS) is used to monitor a Cu‐catalyzed aerobic cross‐coupling reaction between thiol esters and arylboronic acids. The ESI spectra show the formation of Cu‐complexes with the starting thiol ester 1 and the coupling product. The formation of an ionic complex at m/z 305 is observed, most likely occurring upon the elimination of a mixed anhydride from [(1)CuOAc]⁺. An online monitoring of the reaction using ESI‐MS was carried out allowing calculation of rate constants and thermodynamic parameters (ΔH^?, ΔS^?, and ?G^?) for the title reaction.     

Preparation of silver nanoparticles on zinc oxide nanowires by photocatalytic reduction for use in surface‐enhanced Raman scattering measurements

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurements, the high surface area of zinc oxide nanowires (ZnO NWs) was used. ZnO NWs on silicon substrates were prepared and used as substrates for further growth of silver nanoparticles (AgNPs). Ultraviolet (UV) irradiation was used to reduce silver ions to AgNPs on the ZnO wires. With proper growth conditions for both ZnO NWs and AgNPs, the substrates exhibit SERS enhancement factors greater than 10⁶. To understand the influences of the morphologies of the ZnO NWs on the growth of AgNPs, the growing time and temperature were varied. The concentration of silver nitrate and irradiation time of UV radiation were also varied. The resulting AgNPs were probed with para‐nitrothiophenol to quantify the SERS enhancements obtained from the varying conditions. The results indicate that ZnO NWs could be grown at temperatures higher than 490 °C and higher growth temperatures result in smaller diameter of the formed ZnO NWs. Also, the morphologies of ZnO NWs did not significantly alter the SERS signals. The concentration of silver nitrate affects the SERS signals significantly and the optimal concentration was found to be in the range of 10–20 mM. With irradiation times longer than 90 s, the resulting AgNPs showed similar SERS intensities. With optimized conditions, the AgNPs/ZnO substrates are highly suitable for SERS measurements with a typical enhancement factor of higher than 10⁶. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

Near‐infrared surface‐enhanced Raman spectroscopy (NIR‐SERS) studies on oxyheamoglobin (OxyHb) of liver cancer based on PVA‐Ag nanofilm

A near‐infrared surface‐enhanced Raman spectroscopy (NIR‐SERS) method was employed for oxyheamoglobin (OxyHb) detection to develop a simple blood test for liver cancer detection. Polyvinyl alcohol protected silver nanofilm (PVA‐Ag nanofilm) used as the NIR‐SERS active substrate to enhance the Raman scattering signals of OxyHb. High quality NIR‐SERS spectrum from OxyHb adsorbed on PVA‐Ag nanofilm can be obtained within 16 s using a portable Raman spectrometer. NIR‐SERS measurements were performed on OxyHb samples of healthy volunteers (control subjects, n = 30), patients (n = 40) with confirmed liver cancer (stage I, II and III) and the liver cancer patients after surgery (n = 30). Meanwhile, the tentative assignments of the Raman bands in the measured NIR‐SERS spectra were performed, and the results suggested cancer specific changes on molecule level, including a decrease in the relative concentrations and the percentage of aromatic amino acids of OxyHb, changes of the vibration modes of the C_aH_m group and pyrrole ring of OxyHb of liver cancer patients. In this paper, principal component analysis (PCA) combined with independent sample T test analysis of the measured NIR‐SERS spectra separated the spectral features of the two groups into two distinct clusters with the sensitivity of 95.0% and the specificity of 85.7%. Meanwhile, the recovery situations of the liver cancer patients after surgery were also assessed using the method of discriminant analysis‐predicting group membership based on PCA. The results show that 26.7% surgeried liver cancer patients were distinguished as the normal subjects and 63.3% were distinguished into the cancer. Our study demonstrated great potentials for developing NIR‐SERS OxyHb analysis into a novel clinical tool for non‐invasive detection of liver cancers. Copyright © 2013 John Wiley & Sons, Ltd.