太阳能吸收式制冷系统涡旋发生器特性的数值模拟

对吸收式制冷系统中的发生器进行了改进,并对这种新型发生器的特性进行了数值模拟研究.运用FLUENT软件模拟分析了发生器内部流体的流动特性及压力分布情况.研究结果表明:新型发生器的结构可有效降低其内部压力,从而达到降低溴化锂溶液的蒸发温度的目的,可有效利用太阳能等低品位热源.     

翅片管整体传热传质强化的太阳能吸附式制冷系统性能研究

针对太阳能金属管式吸附床传热传质存在的不足,采用增加吸附管传热翅片及增大传质通道的方法,提出一种整体强化传热传质的新型翅片管设计方法,分别设计两种结构形式的太阳能吸附集热器,建立采用活性炭-甲醇为工质对的太阳能吸附式制冷系统。实验表明,采用吸附管横放、两端分别连接汇流导管形式的太阳能翅片管式吸附集热床可明显改善系统制冷性能,其吸附制冷效率是采用吸附管纵向放置、从翅片管上部通过导管连接到汇流导管的吸附床的太阳能吸附式制冷系统的3.56倍。采用性能较好的吸附床可构建太阳能吸附式制冷系统,并在晴朗无云、晴天有时有云、多云辐射强烈及多云辐射微弱4种典型天气情况下,进行吸附制冷系统运行特性和制冷性能实验研究,结果表明前三种天气条件下吸附床维持较高温度(≥80℃)超过4 h,制冷剂解吸较为充分,均产生制冰效果,制冷效率较高,COP最高达0.129;在多云太阳辐射微弱天气条件下,虽然吸附床维持在较高温度(≥80℃)时间不到2 h,但COP可达0.039,体现出该翅片管式吸附床良好的天气适应性。     

一种具有强化自然通风效果的太阳能空调房

提出一种依靠吸附制冷原理制冷，结合太阳能通风筒强化自然通风的太阳能空调房，其特点在于一方面可充分利用太阳能吸附集热器和太阳能通风筒集热面有效降低房间的太阳热负荷；另一方面利用吸附床吸附制冷过程释放大量吸附热的现象，用于强化夜间自然通风。该文针对房间的通风率、进风温度变化等进行了分析，结果表明，典型条件下，采用2．5m^2的太阳能通风筒集热面、5m^2的吸附制冷系统集热面，一间20m^2的太阳房日间通风率可达100kg／h，夜间通风率则可进一步提高30％～40％。和其它空词装置相结合，该太阳房可用作独立式住宅，粮仓等，对于创造健康的居住环境和经济节能型仓储系统都有重要意义。     

冷管型太阳能制冷系统

太阳能吸附式制冷作为一种绿色环保型的制冷技术具有良好的应用前景。本文分析了一种吸附床可直接吸收太阳能的、自身完成集热与制冷的玻璃管型太阳能吸附式制冷管,并介绍了以该冷管为基础的太阳能制冷系统。     

太阳能吸附式制冷系统的研究现状与发展前景

从工作原理、工质对的选择、吸附床的设计、经济性分析及应用几方面,对太阳能吸附式制冷系统进行了详细的综述性分析。由于太阳能转换率低和集热器价格昂贵,目前太阳能吸附式制冷系统存在的主要问题是制冷性能较低、初投资成本大,所以,提高制冷性能、降低成本是太阳能吸附式制冷系统实现商业化和产业化的关键所在。通过选取合适的工质对、强化吸附床的传热传质性能,可有效提高系统的制冷系数,推进其工业化应用。     

一种新颖的太阳能制冷管及其性能实验研究

一种新颖结构的太阳能吸附制冷管,其吸附床由一种具有高强度,高吸附性能和导热性能,并对太阳能具有高吸收率的复合吸附剂块组成,与已有的太阳能制冷系统相比,每根冷管生成一个制冷系统,结构简单,密封性好,同时吸附床可直接吸收太阳辐射,提高了对太阳能的有效利用。实验表明,在未采用专门的集热装置,吸附床向阳面温度仅为７５℃左右的情况下,冷管的性能,系数可达８％左右。     

采用不同集热器的太阳能吸收式制冷系统经济性分析

以能源平均成本和动态投资回收期为经济性指标,对采用平板集热器、真空管集热器、复合抛物面集热器和槽式集热器驱动的太阳能单效溴化锂吸收式制冷系统进行了对比分析,同时以?效率和动态投资回收期为目标对优选的太阳能制冷系统进行了多目标优化。结果表明：采用真空管集热器的太阳能制冷系统的能源平均成本最低及动态投资回收期最短;发生器热水进口温度存在最优值使得系统?效率最高,能源平均成本最低;增加系统装机容量可有效降低系统的能源平均成本并且缩短投资回收期;太阳辐照强度越大,太阳能制冷系统的能源平均成本越低及投资回收期越短。此外,多目标优化结果表明发生器热水进口温度存在最优值可使得综合目标函数取得最小值。     

固体吸附式太阳能空调系统中工质对性能的比较研究

利用重量法测量了几种可用于固体吸附式太阳能空调系统中工质对的性能，分析了压力、温度等因素对吸附量的影响，建立了吸附量回归公式，比较了不同工质对之间的优劣，指出了适合于太阳能空调系统的吸附工质对要求。     

新型太阳能吸收式制冷系统发生器的研究

设计了一种新型太阳能吸收式制冷系统的发生器,利用喷嘴把澳化锂溶液切向喷射到发生器中,通过溴化锂溶液在发生器内的旋转流动,有效降低发生器内部压力,达到降低溴化锂溶液的蒸发温度、充分利用太阳能等低品位热源的目的.     

太阳能固体吸附式制冷循环的吸附床内传热传质耦合计算

用多孔介质理论方法分析了太阳能固体吸式制冷循环的吸附床并相应地按多孔介质的质量、动量、能量传递过程建立了太阳能固体吸附式制冷循环吸附床内传热传质耦合求解的数学模型。用本文建立的方法,可对吸附式制冷循环的吸附床进行了热动力学分析与计算,并可进一步用于系统的优化设计中。     

Aerodynamic performance effects of leading-edge geometry in gas-turbine blades

The purpose of this paper is to illustrate the advantages of the direct surface-curvature distribution blade-design method, originally proposed by Korakianitis, for the leading-edge design of turbine blades, and by extension for other types of airfoil shapes. The leading edge shape is critical in the blade design process, and it is quite difficult to completely control with inverse, semi-inverse or other direct-design methods. The blade-design method is briefly reviewed, and then the effort is concentrated on smoothly blending the leading edge shape (circle or ellipse, etc.) with the main part of the blade surface, in a manner that avoids leading-edge flow-disturbance and flow-separation regions. Specifically in the leading edge region we return to the second-order (parabolic) construction line coupled with a revised smoothing equation between the leading-edge shape and the main part of the blade. The Hodson–Dominy blade has been used as an example to show the ability of this blade-design method to remove leading-edge separation bubbles in gas turbine blades and other airfoil shapes that have very sharp changes in curvature near the leading edge. An additional gas turbine blade example has been used to illustrate the ability of this method to design leading edge shapes that avoid leading-edge separation bubbles at off-design conditions. This gas turbine blade example has inlet flow angle 0°, outlet flow angle −64.3°, and tangential lift coefficient 1.045, in a region of parameters where the leading edge shape is critical for the overall blade performance. Computed results at incidences of −10°,   −5°,   +5°,   +10° are used to illustrate the complete removal of leading edge flow-disturbance regions, thus minimizing the possibility of leading-edge separation bubbles, while concurrently minimizing the stagnation pressure drop from inlet to outlet. These results using two difficult example cases of leading edge geometries illustrate the superiority and utility of this blade-design method when compared with other direct or inverse blade-design methods.     

Hydrogen production by steam-gasification of carbonaceous materials using concentrated solar energy – V. Reactor modeling,optimization, and scale-up

A chemical reactor for the steam-gasification of carbonaceous particles (e.g. coal, coke) is considered for using concentrated solar radiation as the energy source of high-temperature process heat. A two-phase reactor model that couples radiative, convective, and conductive heat transfer to the chemical kinetics is applied to optimize the reactor geometrical configuration and operational parameters (feedstock's initial particle size, feeding rates, and solar power input) for maximum reaction extent and solar-to-chemical energy conversion efficiency of a 5 kW prototype reactor and its scale-up to 300 kW. For the 300 kW reactor, complete reaction extent is predicted for an initial feedstock particle size up to 35 μm at residence times of less than 10 s and peak temperatures of 1818 K, yielding high-quality syngas with a calorific content that has been solar-upgraded by 19% over that of the petcoke gasified.     

汽轮机数字电液调节系统挂闸异常的技术完善

分析了200MW汽轮机数字电液调节系统在运行中存在的挂闸异常问题,采取了相应的技术处理措施,且运行实践效果良好。     

新型高压共轨ECU升压模块的数字化开发与优化

为了提高喷油器电磁阀的响应速率,提出了一种基于CPLD(复杂可编程逻辑器件)应用于高压共轨ECU的数字升压模块。鉴于该升压电路结构参数多,其升压电压的恢复响应要求高等特征,基于Pspice建立了升压电路的仿真模型,研究了不同电路参数下升压模块的输出特性,全面优化了该升压模块的性能。结果显示,该升压模块的最大转换效率可以达90%以上。在柴油发动机上对ECU的试验表明,升压电压最大波动不超过10%,其恢复时间仅为1.3ms,功率管最大温升仅为41℃,满足整机运行范围内ECU的需求。     

Trace metal chemistry and silicification of microorganisms in geothermal sinter, Taupo Volcanic Zone, New Zealand

As part of a pilot study investigating the role of microorganisms in the immobilisation of As, Sb, B, Tl and Hg, the inorganic geochemistry of seven different active sinter deposits and their contact fluids were characterised. A comprehensive series of sequential extractions for a suite of trace elements was carried out on siliceous sinter and a mixed silica-carbonate sinter. The extractions showed whether metals were loosely exchangeable or bound to carbonate, oxide, organic or crystalline fractions. Hyperthermophilic microbial communities associated with sinters deposited from high temperature (92–94°C) fluids at a variety of geothermal sources were investigated using SEM. The rapidity and style of silicification of the hyperthermophiles can be correlated with the dissolved silica content of the fluid. Although high concentrations of Hg and Tl were found associated with the organic fraction of the sinters, there was no evidence to suggest that any of the heavy metals were associated preferentially with the hyperthermophiles at the high temperature (92–94°C) ends of the terrestrial thermal spring ecosystems studied.     

Wind power for pumping: The development of the ITP windpump

Water pumping has been one of the main applications for wind power in the past and despite the spread of mains-electric pumps, more than a million windpumps remain in regular use. This paper reviews the general technical and economic requirements for pumping water using wind energy and by way of example gives an overview of the development of the new ITP wind-pump. It then considers the future prospects for this kind of technology.     

Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials

We describe methods for creating solar-reflective nonwhite surfaces and their application to a wide variety of residential roofing materials, including metal, clay tile, concrete tile, wood, and asphalt shingle. Reflectance in the near-infrared (NIR) spectrum (0.7–2.5 μm) is maximized by coloring a topcoat with pigments that weakly absorb and (optionally) strongly backscatter NIR radiation, and by adding an NIR-reflective basecoat (e.g., one colored with titanium dioxide rutile white) if both the topcoat and the substrate weakly reflect NIR radiation. Coated steel and glazed clay-tile roofing products achieved NIR reflectances of up to 0.50 and 0.75, respectively, using only cool topcoats. Gray-cement concrete tiles achieved NIR reflectances as high as 0.60 with coatings colored by NIR-scattering pigments. Such tiles could attain NIR reflectances of up to 0.85 by overlaying a white basecoat with a topcoat colored by NIR-transparent organic pigments. Granule-surfaced asphalt shingles achieved NIR reflectances as high as 0.45 when the granules were covered with a white basecoat and a cool color topcoat.     

Thermal decay of an initially hot isothermal water body with application to thermal energy storage

The thermal decay of an initially hot isothermal water body contained in a tank was studied. Analytical solutions (including a group-theoretic solution) were obtained for the one-dimensional heat conduction equation with heat loss from the sides of the tank. The convective heat transfer coefficient was assumed not to be constant over the surface of the tank but to vary with space and time. A very good agreement was obtained between the group-theoretic solution and a numerical solution using the Crank-Nicholson finite difference scheme. The analytical results are discussed in terms of the underlying physical mechanisms.     

Ash-forming elements in four Scandinavian wood species. Part 1: Summer harvest

Woody biomass in Finland and Sweden comprises mainly four wood species: spruce, pine, birch and aspen. To study the ash, which may cause problems for the combustion device, one tree of each species were cut down and prepared for comparisons with fuel samples. Well-defined samples of wood, bark and foliage were analyzed on 11 ash-forming elements: Si, Al, Fe, Ca, Mg, Mn, Na, K, P, S and Cl. The ash content in the wood tissues (0.2–0.7%) was low compared to the ash content in the bark tissues (1.9–6.4%) and the foliage (2.4–7.7%). The woods’ content of ash-forming elements was consequently low; the highest contents were of Ca (410–1340 ppm) and K (200–1310), followed by Mg (70–290), Mn (15–240) and P (0–350). Present in the wood was also Si (50–190), S (50–200) and Cl (30–110). The bark tissues showed much higher element contents; Ca (4800–19,100 ppm) and K (1600–6400) were the dominating elements, followed by Mg (210–2400), P (210–1200), Mn (110–1100) and S (310–750), but the Cl contents (40–330) were only moderately higher in the bark than in the wood. The young foliage (shoots and deciduous leaves) had the highest K (7100–25,000 ppm), P (1600–5300) and S (1100–2600) contents of all tissues, while the shoots of spruce had the highest Cl contents (820–1360) and its needles the highest Si content (5000–11,300). This paper presented a new approach in fuel characterization: the method excludes the presence of impurities, and focus on different categories of plant tissues. This made it possible to discuss the contents of ash element in a wide spectrum of fuel-types, which are of large importance for the energy production in Finland and Sweden.     

秸秆燃烧中温度对钾转化与释放的影响

通过对稻秆原料进行常规特性分析和EDX元素含量分析,发现钾在稻秆无机元素中占有重要地位。参考原料化学分馏法和土壤中钾的分类与测试方法,给出了对生物质原料及其燃烧产物中钾的定性与定量简易方法。通过程序控温型固定床对稻秆先进行缓慢氧化,然后以100℃为间隔从400～900℃进行成灰,并分别测试其成灰率、有效钾和全钾的份额。结合稻秆原料及其灰中钾的份额分析,进行了稻秆灰中有效钾转化与释放的计算,发现有效钾在700～800℃之间有快速的释放和形态转变。稻秆灰的XRD分析结果表明秸秆灰中钾主要以KCl、K_2SO_4形式存在,得到了钾以盐的形式进行转化与释放的机理。该文中燃烧温度对钾转化与释放的影响规律对设计秸秆电厂时的炉型选择和燃烧参数确定有一定参考价值。