The technologies of in‐cell optical touch panel with novel input functions

Abstract— The technologies behind an in‐cell optical touch‐panel LCD with novel input functions will be described. By improving both the optical and electrical signal‐to‐noise ratio (SNR), a touch‐panel operation robust to ambient conditions can be achieved with a low‐power consumption suitable for integration into mobile products. The high SNR also enables a range of novel input functions making the in‐cell optical touch panel a promising platform for the next‐generation of user interface.     

Fault‐tolerant display image‐data‐manipulation unit for system‐on‐panel

Abstract— Bit‐partitioned and conventional shifts, as well as type transformations of multimedia data, are frequently used for display image‐processing systems. A data manipulation unit with fault‐recovery capability based on redundancies is proposed for system‐on‐panel with low processing technology yield. Utilizing data manipulations that are similar to normal shift operation, a proposed data‐manipulation unit is designed with a few additional paths added to the existing barrel shifter. The design methodologies are verified with FPGA and the performance is evaluated in terms of the advantages.     

A foldable OLED display with an in‐cell touch sensor having embedded metal‐mesh electrodes

A foldable organic light‐emitting diode display integrating a touch sensor is fabricated. The touch sensor has an in‐cell structure where metal‐mesh sensor electrodes are formed in a counter substrate. It is demonstrated that touch on the entire panel surface, including a bent portion, is detected and that the touch panel operates correctly after 100,000 folding operations with a radius of curvature of 5 mm.     

Touch‐screen panel integrated into 12.1‐in. a‐Si:H TFT‐LCD

Abstract— A touch‐screen‐panel (TSP) embedded 12.1‐in. LCD employing a standard existing a‐Si:H TFT‐LCD process has been successfully developed. Compared with conventional external touch‐screen panels, which use additional components to detect touch events, the new internal TSP exhibits a clearer image and improved touch feeling, as well as increased sensing speed using discrete sensing lines to enable higher‐speed sensing functions including handwriting. The new internal digital switching TSP can be fabricated with low cost because it does not require any additional process steps compared to a standard a‐Si:H TFT‐LCD.     

Scintillator‐based flat‐panel x‐ray imaging detectors

Abstract— Large‐area amorphous‐silicon flat‐panel x‐ray imaging detectors were introduced commercially about 10 years ago and have seen a steady increase in both volume and number of applications since. The flat‐panel‐detector industry was made possible by manufacturing methods and equipment first developed for the display industry. Here, the different types of flat‐panel detectors are described, with focus on the scintillator‐based TFT/photodiode detector. The manufacturing process used for these detectors is explained and compared to that for displays. Detector operation is detailed, and the various medical and industrial applications are described. Finally, the performance metrics for these detectors and the impact of the performance requirements on detector design are discussed.     

Development of middle size full in‐cell LCD module for PC with IGZO

We developed the world's first middle size full in‐cell LCD for PC with IGZO technology. We evaluated a new Gate driver In Panel structure with latch circuit and confirmed that there were no problems with display and touch panel performance. Furthermore, we did a feasibility study of higher display resolutions and larger size panels, which showed future possibilities.     

Design and implementation of readout circuit on glass substrate with digital correction for touch‐panel applications

Abstract— A readout circuit on glass substrate with digital correction, which contains a transconductance amplifier, counter, and digital correction circuit, has been designed for touch‐panel applications for 3‐μm low‐temperature polysilicon (LTPS) technology. The voltage difference as a result of a change in capacitance due to a touch event is converted to current by a transconductance amplifier. By charging and discharging the capacitor in the counter, the counter displays different digital‐output codes according to touch or non‐touch events. Furthermore, not only can the touch or non‐touch event be distinguished, but also the influence of LTPS process variation can be compensated by a digital correction circuit in the proposed readout circuit.     

A 1.4‐Gbps intra‐panel interface with low‐power and low‐EMI schemes for Tablet PC applications

An intra‐panel interface addressing all of the high‐speed, low‐power, and low‐electromagnetic interference (EMI) requirements for tablet personal computer applications is presented. This work proposes an adaptive clock window scheme to achieve 1.4‐Gbps data‐rate. For EMI suppression, data scrambling, horizontal blank period pattern scrambling, and novel clock and data recovery circuit are introduced. Lastly, for power‐saving, the proposed interface dynamically biases source driver's output buffers and employs early charge sharing by controlling the configuration data. For verification, a WQXGA thin‐film transistor liquid crystal display system is implemented with the timing controller and source driver ICs that are fabricated using 65‐nm and 180‐nm complementary metal‐oxide semiconductor (CMOS) processes, respectively. The liquid crystal display system demonstrates maximum operation speed of 1.4 Gbps and suppression of EMI noise in LTE Band‐20 and GSM 850 bands. The proposed power‐saving schemes achieve 4.3% reduction in total power consumption by source driver IC, which reaches about 85% of power consumption by enhanced reduced‐voltage differential signaling interface circuit.     

Capacitive touchscreen‐integrated electrostatic tactile display with localized sensation

An electrostatic tactile display with a projected capacitive touchscreen integrated into a single panel was demonstrated. Every electrode on the panel is driven for both tactile presentation and the touch sensor. The functions are both time and spatially multiplexed, and a reference–node‐driven high‐pass filter in the touch controller filters out the noise from the tactile driving signals.     

Two‐parallax‐barriers‐based autostereoscopic liquid‐crystal display without cross‐talk

Abstract— An autostereoscopic liquid‐crystal display (LCD) consists of two parallax barriers and an LCD including a liquid‐crystal panel, and a backlight panel is proposed. Parallax barrier 1 is located between the backlight panel and the liquid‐crystal panel, and Parallax barrier 2 is located between the liquid‐crystal panel and viewers. The operation principle of the autostereoscopic display and the calculation equations for the parallax barriers are described in detail. The autostereoscopic LCD was developed and produces high‐quality stereoscopic images without cross‐talk at the optimal viewing distance and less cross‐talk than a conventional one based on one parallax barrier at other viewing distances.     

Electrical models of TFT‐LCD panels for circuit simulations

Abstract— As thin‐film‐transistor liquid‐crystal‐display (TFT‐LCD) panels become larger and provide higher resolution, the propagation delay of the row and column lines, the voltage modulation of Vcom, and the response time of the liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristics of TFT‐LCD panels these days. There are several commercial products that simulate the electrical and optical performance of TFT‐LCDs. Most of the simulators are made for panel designers. However, this research is for circuit, system, and panel designers. It is made in a SPICE and Cadence environment as a commercial circuit‐design tool. For circuit and system designers, it will help to design the circuit around a new driving method. Also, it can be easily modified for every situation. It also gives panel designers design concepts. This paper describes the electrical model of a 15‐in. XGA (1024 × 768) TFT‐LCD panel. The parasitic resistance and capacitance of the panel are obtained by 3‐D simulation of a subpixel. The accuracy of these data is verified by the measured values of an actual panel. The developed panel simulation platform, the equivalent circuit of a 1 5‐in. XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of the OE signal. The proposed simulation platform for modeling TFT‐LCD panels can be especially applied to large‐sized LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.     

A 23‐in. full‐panel‐resolution autostereoscopic LCD with a novel directional backlight system

Abstract— An autostereoscopic display that shows stereoscopic images with full‐panel resolution has been developed,¹ but it has a problem in terms of unit size. To resolve this problem, a new directional backlight system was developed, and it was applied to a prototype autostereoscopic LCD. The backlight system has two light sources — one for the right eye and the another for the left eye — and an elliptically shaped mirror that controls the direction of light from the light sources. The LCD uses a field‐sequential method which re‐writes an image for one eye and one for the other eye at a frame rate of 120 Hz, and the light sources alternately blink in synchronization with each frame so that the LCD shows full‐panel‐resolution stereoscopic images without flicker. In this paper, the new backlight system is described. The backlight system is effective for large screen such as 23 in. on the diagonal. By using this backlight system, the prototype LCD achieved practible unit size, brightness over the entire screen, and cross‐talk.     

An in‐cell capacitive touch sensor integrated in an LTPS WSVGA TFT‐LCD

This paper discusses an In‐cell capacitive touch sensor and its integration in an LTPS TFT‐LCD with 7‐inch screen size and WSVGA resolution. The operation of the newly developed sensor is based on capacitive coupling between user's finger and the detection electrode on the TFT substrate, and is purely capacitive. The sensors and the sensor driver circuits have been integrated in the TFT substrate of the prototype TFT‐LCD using LTPS technology. The prototype having 256x150 sensors shows advantages such as smooth operation with no touch force, high position accuracy, multi‐touch (10 or more), a thin and light LCD module, high display quality, and thus is suitable for various applications such as cell‐phones, smart‐phones, mobile‐PCs, and automotive‐use displays.     

High‐efficiency PDP micro‐discharges

Abstract— High‐efficiency plasma‐display‐panel micro‐discharge characteristics will be discussed. An increase in the discharge efficiency for a higher‐Xe‐content gas mixture is well known. In this article, the interdependency of the capacitive design, the sustain voltage, and the Xe content will be discussed. A high panel efficacy was obtained, especially for the design and driving conditions that govern the development of a fast discharge. A fast discharge was observed for a higher discharge field at sustain voltages higher than 200 V. A +C‐buffer design, where the extra capacitance acts as a local on the panel power source that lowers the voltage decrease inherent to the discharge of the discharge capacitance upon firing, and efficient priming of the discharge at higher sustain frequency, also stimulates a fast‐discharge development. Apparently, a “high‐efficiency fast‐discharge mode” exists. It is proposed that in this mode the cathode sheath is not, or incompletely, formed during the increase in the discharge current, and the electric field in the discharge cell is dominated not by the space charges but by the externally applied voltage. The effective discharge field is lowered, resulting in a lower effective electron temperature and more efficient Xe excitation. Also, under a fast discharge build‐up condition, the electron‐heating efficiency increases, due to a decrease in the ion heating losses in the cathode sheath. In a 4‐in. color plasma‐display test panel, operating in a high‐efficiency discharge mode and containing a 50%Xe in Ne gas mixture, a panel efficacy of 5 lm/W concurrent with a luminance of 5000 cd/m² was realized. This result was obtained at a sustain voltage of 260 V. These data compare favorably with alternative high‐efficacy panel design approaches.     

Large‐area FEDs with carbon‐nanotube field emitter

Abstract— Application of carbon nanotubes (CNTs) as field emitters for large‐area FED panels is described. In 1998, we presented the first experimental devices: light‐source tubes for outdoor large‐area displays and a diode‐type flat‐panel display, both with screen‐printed CNT cathodes. The fisrt practical high‐luminance color CNT‐FED panel was built in 1999. It employed the new triode‐structure panel was x‐y addressable. The CNT‐FED structure was further optimized for large‐area display panels by improving the luminous uniformity. This paper also describes the design and performance of a new, experimental, 40‐in.‐diagonal panel, which showed that the CNT‐FED technology is suitable for use in large‐area displays.     

A highly sensitive and low‐noise IR photosensor based on a‐SiGe as a sensing and noise filter: Toward large‐sized touch‐screen LCD panels

Abstract— The a‐SiGe TFT photosensor for embedded touch‐screen panels (TSPs) was characterized by comparison with an a‐Si sensor. The photoresponse of an a‐SiGe sensor at a 850‐nm wavelength was much higher than that of a‐Si, indicating that a‐SiGe is a strong candidate material for an IR sensor. In order to increase the signal‐to‐noise ratio, the incident visible light was filtered by incorporating a bandpass‐filter layer. An a‐SiGe IR‐sensor‐embedded LCD panel was successfully demonstrated, showing an excellent multitouch property independent of ambient‐light conditions. This technology can be widely used in multifunctional TSPs.     

Multi‐view 3‐D display employing a flat‐panel display with slanted pixel arrangement

Abstract— A flat‐panel display with a slanted subpixel arrangement has been developed for a multi‐view three‐dimensional (3‐D) display. A set of 3M × N subpixels (M × N subpixels for each R, G, and B color) corresponds to one of the cylindrical lenses, which constitutes a lenticular lens, to construct each 3‐D pixel of a multi‐view display that offers M × N views. Subpixels of the same color in each 3‐D pixel have different horizontal positions, and the R, G, and B subpixels are repeated in the horizontal direction. In addition, the ray‐emitting areas of the subpixels within a 3‐D pixel are continuous in the horizontal direction for each color. One of the vertical edges of each subpixel has the same horizontal position as the opposite vertical edge of another subpixel of the same color. Cross‐talk among viewing zones is theoretically zero. This structure is suitable for providing a large number of views. A liquid‐crystal panel having this slanted subpixel arrangement was fabricated to construct a mobile 3‐D display with 16 views and a 3‐D resolution of 256 × 192. A 3‐D pixel is comprised of 12 × 4 subpixels (M = 4 and N = 4). The screen size was 2.57 in.     

Dual‐lenticular‐lens‐based 2‐D/3‐D convertible autostereoscopic display

Abstract— A 2‐D/3‐D convertible display using two lenticular lenses has been developed. It shows 2‐D pictures in full resolution and 3‐D autostereoscopic pictures in half resolution by moving one lens relative to the other. The lens assembly consists of thin metal frames, two lenticular lenses, and two shape‐memory‐alloy (SMA) wires used as actuators. While this assembly is applicable to flat‐panel displays of any kind, its simple structure and low power consumption make it best suited to mobile terminals, such as PDAs and mobile phones. Here, we describe its structure and present evaluation results.     

Silicon‐nanocrystal‐based photosensor integrated on low‐temperature polysilicon panels

Abstract— A photodetector using a silicon‐nanocrystal layer sandwiched between two electrodes is proposed and demonstrated on a glass substrate fabricated by low‐temperature poly‐silicon (LTPS) technology. Through post excimer‐laser annealing (ELA) of silicon‐rich oxide films, silicon nanocrystals formed between the bottom metal and top indium thin oxide (ITO) layers exhibit good uniformity, reliable optical response, and tunable absorption spectrum. Due to the quantum confinement effect leading to enhanced phonon‐assisted excitation, these silicon nanocrystals, less than 10 nm in diameter, promote electron‐hole‐pair generation in the photo‐sensing region as a result resembling a direct‐gap transition. The desired optical absorption spectrum can be obtained by determining the thickness and silicon concentration of the deposited silicon‐rich oxide films as well as the power of post laser annealing. In addition to obtaining a photosensitivity comparable to that of the p‐i‐n photodiode currently used in LTPS technology, the silicon‐nanocrystal‐based photosensor provides an effective backlight shielding by the bottom electrode made of molybdenum (Mo). Having a higher temperature tolerance for both the dark current and optical responsibility and maximizing the photosensing area in a pixel circuit by adopting a stack structure, this novel photosensor can be a promising candidate for realizing an optical touch function on a LTPS panel.     

360°‐viewable cylindrical integral imaging system using a 3‐D/2‐D switchable and flexible backlight

Abstract— A 360°‐viewable cylindrical three‐dimensional (3‐D) display system based on integral imaging has been implemented. The proposed system is composed of a cylindrically arranged electroluminescent (EL) pinhole film, an EL film backlight, a barrier structure, and a transmission‐type flexible display panel. The cylindrically arranged point‐light‐source array, which is generated by the EL pinhole film reconstructs 360°‐viewable virtual 3‐D images at the center of the cylinder. In addition, the proposed system provides 3‐D/2‐D convertibility using the switching of EL pinhole film from a point light source to a surface light source. In this paper, the principle of operation, analysis of the viewing parameters, and the experimental results are presented.