Mo掺杂SrBi4Ti4O15陶瓷的铁电介电性能

用传统的固相烧结工艺，制备了钼掺杂铁电陶瓷样品SrBi₄Ti₄O₁₅(SBTi)铁电陶瓷SrBi_4-2x/3Ti_4-xMo_xO₁₅(x=0.00，0.003，0.012，0.03，0.06，0.09).X射线衍射的结果表明，样品均为单一的层状钙钛矿结构相，Mo掺杂未改变SBTi的晶体结构.通过扫描电子显微镜观测发现，样品晶粒为片状，随掺杂量的增加，晶粒逐 关键词： 4Ti₄O₁₅')" href="#">SrBi₄Ti₄O₁₅ Mo掺杂 剩余极化 居里温度     

La掺杂SrBi4Ti4O15铁电材料性能研究

按x=0.00，0.10，0.25，0.50，0.75和1.00，采用固相烧结工艺，制备了不同La掺杂量的SrBi_4-xLa_xTi₄O₁₅的陶瓷样品. 用x射线衍射对其微结构进行了分析，并测量了铁电、介电性能.结果发现，La掺杂未改变SrBi₄Ti ₄O₁₅的晶体结构.随掺杂量的增加，样品的矫顽场(E_c)下降，剩余极化(2P_{关键词： 4-x}La_xTi₄O₁₅')" href="#">SrBi_4-xLa_xTi₄O₁₅ La掺杂 铁电性能 相变温度 弛豫铁电     

SrBi2Ta2O9/Bi4Ti3O12复合铁电薄膜的制备与特性研究

采用溶胶凝胶工艺在p-Si衬底上制备了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合铁电薄膜. 研究了SrBi₂Ta₂O₉/Bi₄Ti₃O₁₂复合薄膜的微观结构与生长行为、铁电性能和疲劳特性. 研究表明: Si衬底Bi₄Ti< 关键词： 2Ta₂O₉')" href="#">SrBi₂Ta₂O₉ 4Ti₃O₁₂')" href="#">Bi₄Ti₃O₁₂ 复合铁电薄膜 溶胶凝胶工艺     

B位等价掺杂SrBi4Ti4O15铁电材料的性能研究

采用了传统的固相烧结工艺,制备了不同Zr和Hf掺杂量的SrBi₄Ti_4-xZr_xO₁₅（x=000,003, 006,010,020）和SrBi₄Ti_4－xHf_xO₁₅（x=000,0005, 0015,0030,0060）的陶瓷 关键词： 4Ti_4-xZr_xO₁₅')" href="#">SrBi₄Ti_4-xZr_xO₁₅ 4Ti_4－xHf_xO₁₅')" href="#">SrBi₄Ti_4－xHf_xO₁₅ 铁电性能 介电性能     

(Bi,La)4Ti3O12-Sr(Bi,La)4Ti4O15共生结构铁电材料性能研究

采用固相烧结工艺，制备了不同La掺杂量(x=0.00，0.25，0.50，0.75，1.00，1.25和1.50) 的(Bi, La)₄Ti₃O₁₂-Sr(Bi, La)₄Ti4O₁₅ (SrBi_8-xLa_xT i₇O₂₇)共生结构铁电陶瓷样品.用x射线衍射对其进行微结构分析 ，并测量铁 关键词： 4Ti₃O₁₂-SrBi₄Ti₄O₁₅')" href="#">Bi₄Ti₃O₁₂-SrBi₄Ti_{4O15 La掺杂 铁电性能 居里温度 弛豫铁电}     

La掺杂诱发层状钙钛矿型铁电体弛豫性相变的介电研究

制备了La掺杂层状钙钛矿铁电体材料SrBi₄Ti₄O₁₅, Sr₂Bi₄Ti₅O₁₈以及共生结构Bi₄Ti₃O₁₂-SrBi₄Ti₄O₁₅，通过研究样品的变温介电特性发现，SrBi_4-xLa_{x 关键词： 弛豫性相变 微畴-宏畴 层状钙钛矿 介电性能}     

La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO₂/Si衬底上制备出Bi₄Ti₃O₁₂和Bi_3.25La_0.75Ti₃O₁₂薄膜，研究了La掺杂对Bi₄Ti₃O₁₂薄膜的晶体结构、铁电性能和疲劳特性的影响，发现La掺杂没有改变Bi₄Ti₃O₁₂薄膜的基本晶体结构，并且提高了Bi₄Ti₃O₁₂铁电薄膜的剩余极化值和抗疲劳性能，对La掺杂改善Bi₄Ti₃O₁₂铁电薄膜性能的机理进行了讨论. 关键词： 铁电性能 4Ti₃O₁₂薄膜')" href="#">Bi₄Ti₃O₁₂薄膜 3.25La_0.75Ti₃O₁₂薄膜')" href="#">Bi_3.25La_0.75Ti₃O₁₂薄膜 sol-gel法 La掺杂     

外延PbZr0.4Ti0.6O3薄膜厚度对其铁电性能的影响

从Landau-Devonshire唯象理论出发，考虑到晶格失配导致的NFDA3位错应力场与极化场的耦合，研究了在SrTiO₃衬底上外延生长的PbZr_0.4Ti_0.6O₃薄膜厚度对其自发极化强度、电滞回线的影响. 结果表明，产生刃位错的PbZr_0.4Ti_0.6O₃薄膜临界厚度为～1.27nm，当薄膜厚度大于临界厚度时，在所形成的位错附近，极化强度出现急剧变化，形成自发极化强度明显减弱的“死层”；随着薄膜厚度的减小，位错间距增大，“死层”厚度与薄膜总厚度之比增加. 由薄膜电滞回线的变化情况可知，其剩余极化强度随着薄膜厚度的减小而逐渐减小. 关键词： 铁电薄膜 自发极化强度 电滞回线 位错     

CaCu3Ti4O12陶瓷的介电特性与弛豫机理

本文采用Novocontrol宽频介电谱仪在-100 ℃–100 ℃温 度范围内、0.1 Hz–10 MHz频率范围内测量了表面层打磨前 后CaCu₃Ti₄O₁₂陶瓷的介电特性, 分析了CaCu₃Ti₄O₁₂陶瓷的介电弛豫机理. 首先, 基于对宏观“壳-心”结构的定量分析, 排除了巨介电常数起源于表面层效应的可能性; 其次, 基于经典Maxwell-Wagner夹层极化及其活化能物理本质的分析, 排除了巨介电常数起源于经典Maxwell-Wagner极化的可能性; 最后, 依据晶界Schottky势垒与本征点缺陷的本质联系, 提出了巨介电常数起源于Schottky势垒边界陷阱电子弛豫的新机理. 陷阱电子弛豫机理反映了CaCu₃Ti₄O₁₂陶瓷本征点缺陷、 电导、介电常数之间的本质关系. 关键词： 3Ti₄O₁₂')" href="#">CaCu₃Ti₄O₁₂ 介电弛豫 Schottky势垒 点缺陷     

探索基于人工超晶格LaFeO3-YMnO3和自然超晶格n-LaFeO3-Bi4Ti3O12薄膜多铁性

基于纳米尺寸下复合铁电材料和反铁磁性材料是一个探索多铁性材料有效的方法. 利用激光脉冲沉积制备出LaFeO₃-YMnO₃人工超晶格和掺入不同层LaFeO₃, BiFeO₃的Bi₄Ti₃O₁₂的外延薄膜. 通过系统的X射线衍射、透射电子显微术、扫描透射电子显微术下的能量损失谱表征证明这些样品具有原子尺寸上清晰的界面和完整的层状结构. 磁性测试证明这些材料具有亚铁磁性. 特别是在0.5和1.5LaFeO₃-Bi₄Ti₃O₁₂中的亚铁磁性甚至能保持到室温. 就铁电性而言, 铁电性测试显示出LaFeO₃-YMnO₃和插入BiFeO₃的Bi₄Ti₃O₁₂样品中存在较大的漏电流, 而在0.5LaFeO₃-Bi₄Ti₃O₁₂样品中存在铁电性. 因此在0.5LaFeO₃-Bi₄Ti₃O₁₂中能够实现亚铁磁和铁电共存. 其次发现当掺入多层的钙钛矿(3层SrTiO₃或2.5层LaFeO₃)后, Bi₄Ti₃O₁₂ 的层状结构将出现结构失稳现象. 这些工作对于利用纳米复合开发新颖多铁性提供一些实例.     

W doping-dependent structural and ferroelectric properties of SrBi2Nb2O9 ferroelectric ceramics

The structural and ferroelectric characteristics of SrBi₂(Nb_1−xW_x)₂O₉ (x=0–0.12) ferroelectric ceramics were investigated. SrBi₂(Nb_1−xW_x)₂O₉ ceramics consisted of a single-phase layered perovskite structure when x was less than 0.06. Uniform microstructure and grain size reduction were observed after the introduction of W. The maximum remanent polarization of 16 μC/cm² appeared at x=0.03, and the coercive field decreased with increasing concentration of W. The ferroelectric behavior of SrBi₂(Nb_1−xW_x)₂O₉ ceramics is interpreted based on the Raman measurement.     

Synthesis and ionic conductivity of new layered perovskite compound, Ag2La2Ti3O10

A new layered perovskite compound, Ag₂La₂Ti₃O₁₀, was synthesized by an ion-exchange reaction of M₂La₂Ti₃O₁₀ (M = Na,K) with a AgNO₃ molten salt. The crystal structure and the ionic conductivity of the ion-exchanged compound were investigated. The ionic conductivities attributed to the interlayer silver ions were observed at high temperatures. The ionic conductivity of Ag₂La₂Ti₃O₁₀ was much higher than that of Na₂La₂Ti₃O₁₀, while the interlayer sodium ions in Na₂La₂Ti₃O₁₀ and silver ions in Ag₂La₂Ti₃O₁₀ have almost the same rock-salt type coordination. The higher conductivity of Ag₂La₂Ti₃O₁₀ is probably due to the higher polarizability of silver ions.     

CaCu3Ti4O12 陶瓷介电模量响应特性的研究

由于CaCu₃Ti₄O₁₂巨介电常数陶瓷的低频区直流电导较大, 本文采用模量 M"-f频谱表征与分析了低频和高频的两个松弛极化过程. 研究认为, 这两个特征峰属于晶界区Schottky 势垒耗尽层边缘深陷阱的电子松弛过程, 其中高频松弛峰起源于晶粒本征缺陷的电子松弛过程, 而低频松弛峰则为与氧空位有关的松弛极化过程. 对于CaCu₃Ti₄O₁₂这类低频下具有高直流电导的陶瓷材料, 采用模量频谱能更有效地分析研究其损耗极化机理. 关键词： 3Ti₄O₁₂陶瓷')" href="#">CaCu₃Ti₄O₁₂陶瓷 模量 松弛过程 电导     

Room-temperature vertical ferroelectricity in rhenium diselenide induced by interlayer sliding

One variety of ferroelectricity that results from lateral relative movements between the adjacent atomic layers is referred to as sliding ferroelectricity, which generates an interfacial charge transfer and hence a polarization reversal. The mechanism of sliding ferroelectricity existent in van der Waals crystals is quite distinct from the conventional ferroelectric switching mechanisms mediated by ion displacement. It creates new possibilities for the design of two-dimensional (2D) ferroelectrics since it can be achieved even in non-polar systems. Before 2D ferroelectrics can be widely employed for practical implementations, however, there is still significant work to be done on several fronts, such as exploring ferroelectricity possibly in more potential 2D systems. Here, we report the experimental observation of room-temperature robust vertical ferroelectricity in layered semiconducting rhenium diselenide (ReSe₂), a representative member of the transition metal dichalcogenides material family, based on a combined research of nanoscale piezoresponse and second harmonic generation measurements. While no such ferroelectric behavior was seen in 1L ReSe₂, 2L ReSe₂ exhibits vertical ferroelectricity at ambient environment. Based on density-functional theory calculations, we deduce that the microscopic origin of ferroelectricity for ReSe₂ is uncompensated vertical charge transfer that is dependent on in-plane translation and switchable upon interlayer sliding. Our findings have important ramifications for the ongoing development of sliding ferroelectricity since the semiconducting properties and low switching barrier of ReSe₂ open up the fascinating potential for functional nanoelectronics applications.     

Pr含量对Bi_5Fe_(0.5)Co_(0.5)Ti_3O_(15)室温多铁性的影响

采用改良的固相烧结工艺制备了Bi5-xPrxFe0.5Co0.5Ti3O15(BPFCT-x,x=0.25,0.50,0.75,0.80)陶瓷样品.X射线衍射结构分析表明:镨(Pr)含量对样品微观结构产生了影响,但所有样品均为层状钙钛矿结构;BPFCT-x样品的剩余极化强度(2Pr)随着掺杂量的增加呈现出先增大后减小的变化趋势,当Pr含量为0.75时,样品的2Pr达到最大值,为6.43μC/cm2.样品的磁性与铁电性能具有相同的变化规律,室温下样品的剩余磁化强度(2Mr)也呈现出先增大后减小的趋势,并且也在x=0.75时达到最大为0.097 emu/g.随着Pr掺杂量增大,样品的室温下铁电和铁磁性能得到明显改善,并且当掺杂量为0.75时,样品室温多铁性最好.Pr掺杂降低了样品中的缺陷浓度,从而提高了样品铁电畴动性,这有助于提高样品铁电性能.而样品铁磁性能的改善可能与Pr对样品晶格畸变产生的影响有关.     

Dielectric properties and ac-conductivity analysis of Bi3.25La0.75Ti3O12 ceramic using impedance spectroscopy

Investigations have been performed on lanthanum-modified layered ferroelectric bismuth titanate for composition Bi_3.25La_0.75Ti₃O₁₂ (BLT) using impedance spectroscopy to understand the role of microstructure on the dielectric properties of this important material. A wide range of frequency and a wide range of temperature passing through the Curie point were chosen for the measurement. The frequency dependence suggested an interfacial polarization controlled Maxwell–Wagner type relaxation at low frequencies, and the impedance spectrum correlated with the mathematical fitting indicated the presence of two types of interfaces, which were attributed to the metallurgical boundaries and the twinned planes parallel to the bismuth oxide layers inherent to the crystal structure within the metallurgical grains. A careful analysis of the dielectric properties, particularly the ac-conductivity analysis revealed that the grain boundaries did also follow their own Jonscher-like relaxation, and the overall relaxation of the sample changed to a purely grain boundary-limited response at low frequency to a pure grain-limited response at higher frequencies. And overall admittance of the ceramic sample neither follow unmodified nor modified Jonscher's law rather its behaviour can be well described by series addition of Jonscher's admittance corresponding to grain boundary and grain. It was demonstrated that the frequency response of the ac conductivity was related to the microstructure exactly in the same way as any other dielectric function, like the impedance or dielectric constant, a fact, which is not much emphasized in the open literature.     

CaCu3Ti4O12 陶瓷松弛损耗机理研究

CaCu₃Ti₄O₁₂介电损耗较大且损耗机理尚不明确, 因此限制了其应用.本文采用固相法和共沉淀法合成CaCu₃Ti₄O₁₂陶瓷, 利用宽带介电温谱研究在交流小信号作用下, 双Schottky势垒耗尽层边缘深陷阱的电子松弛过程、 载流子松弛过程以及CaCu₃Ti₄O₁₂陶瓷的介电损耗性能. 研究发现, 在低频下以跳跃电导和直流电导的响应为主, 而高频下主要为深陷阱能级的松弛过程所致, 特别是活化能为0.12 eV的深陷阱浓度, 这是决定CaCu₃Ti₄O₁₂陶瓷高频区介电损耗的重要因素.降低直流电导, 有利于降低低频区介电损耗; 而高频区介电损耗的降低, 需要降低深陷阱浓度或增大晶粒尺寸. 共沉淀法制备的CaCu₃Ti₄O₁₂陶瓷, 有效降低直流电导及控制深陷阱浓度, 介电损耗降低明显. 关键词： 3Ti₄O₁₂陶瓷')" href="#">CaCu₃Ti₄O₁₂陶瓷 介电损耗 松弛过程 Schottky势垒     

R型铁氧体BaFe4-xTi2+xO11的化学组态以及磁性行为的研究

本文通过传统的固相反应法制备了R型六角铁氧体BaFe_4-xTi_2+xO₁₁ (x= 0, 0.25, 0.5, 0.75, 1), 并且对它的原子价态以及磁性行为进行了研究. X 射线光电子能谱(XPS)结果显示了随着掺杂含量的增加, 体系中Fe³⁺离子逐渐减少而Fe²⁺离子逐渐增加. 由于具有非对称结构的阻挫晶格中存在各种关联作用的竞争, 使得BaFe_4-xTi_2+xO₁₁体系表现出了复杂的磁有序行为, 在T₁～250 K和T₂～83 K两处存在磁转变. 对这一系列掺杂样品, 在相变温度T₁之上表现顺磁行为, 而在相变温度T₂前后的磁化强度都表现出低场下随磁场的增加快速增加, 高场下则线性变化且在5×10⁴ Oe时还未达到饱和的行为, 表明这一系列掺杂样品是典型的倾斜反铁磁态(canted antiferromagnetic) 或者亚铁磁态.     

柔性Pb(Zr_(0.53)Ti_(0.47))O_3薄膜的高温铁电特性

随着柔性电子产品的迅速发展,具有优异铁电和压电性的Pb(Zr_(0.53)Ti_(0.47))O_3 (PZT)薄膜在柔性的非易失性存储器、传感器和制动器等器件中有广泛的应用前景.同时,由于外部环境越来越复杂,具有高温稳定特性的材料和器件受到越来越多的关注.本文在耐高温的二维层状氟晶云母衬底上,用脉冲激光沉积技术制备出外延的PZT薄膜,并通过机械剥离的方法,得到柔性的外延PZT薄膜.研究了Pt/PZT/SRO异质结的铁电和压电性及其高温特性,发现样品表现出优越的铁电性,剩余极化强度(P_r)高达65μC/cm~2,在弯曲104次后其铁电性基本保持不变,且样品在275℃高温时仍然保持良好的铁电性.本文为柔性PZT薄膜在航空航天器件中的应用提供了实验基础.