自启动被动锁模掺铒光纤激光器的研究

在非线性光纤环形镜非线性开关效应和块状半导体波导饱和吸收效应的共同作用下，实现了掺铒光纤激光器的自启动被动锁模，获得了十分稳定的锁模脉冲序列，观察到高次谐频锁模脉冲输出。分析了非线性光纤环形镜的非线性开关反射特性。     

激光器件 其他

TN2422006010143基于光纤环形镜的全光脉冲整形器=An all-optical pulseshaper based on nonlinear optical loop mirror[刊,中]/蒋运涛(中科院上海光机所高功率激光物理国家实验室.上海(201800)),罗航…∥中国激光.—2005,32(9).—1239-1242提出了一种基于光纤环形镜的全光脉冲整形器。该全光脉冲整形器利用波分复用器将控制光脉冲引入光纤环形镜中,控制光脉冲由于交叉相位调制在信号光上产生的非线性附加相移。信号光在耦合器中发生干涉,经过整形的信号光脉冲从脉冲整形器的出射端出射,信号脉冲的波形由非线性附加相移的波形决定。实验…     

自启动被动锁模掺饵光纤激光器的研究

在非线性光纤环形镜非线性开关效应和块状半导体波导饱和吸收效应的共同作用下，实现了掺饵光纤激光器的自启动被动锁模，获得了十分稳定的锁模脉冲序列，观察到高次谐频锁模脉冲输出。分析了非线性光纤环形镜的非线性开关反射特性。     

非线性光纤环形镜的脉冲透过特性研究

研究了光纤反常色散区非线性环形镜（NOLM）的脉冲透过特性，得到NOLM周期性透过率函数 第一极大值处透过率、压缩比和对应的孤子阶数与环长之间的函数关系图.通过比较长环和 短环NOLM对无啁啾、啁啾脉冲的透过率和压缩比特性，得出了长环有利于脉冲整形而短环有 利于脉冲压缩的结论. 关键词： 非线性环形镜 透过率 压缩比 孤子阶数     

基于色散不对称光纤环形镜的锁模光纤激光器

在理论上数值计算了各种常量对色散不对称非线性光纤环形镜透射特性的影响。并分析了它作为被动锁模器件用于光纤激光器压窄脉冲的物理机制。利用8字形主被动混合锁模的结构在调制频率为9．998748700 GHz，波长为1566．65nm处获得了11ps的稳定锁模脉冲输出．对应谱宽0．297nm．同时在重复频率为9．995792825 GHz和9．996778256 GHz时分别得到了振幅均匀的二阶和三阶谐波锁模输出。证明色散不对称非线性光纤环形镜可以有效消减脉冲的尾翼和噪声．得到脉幅稳定的脉冲序列。     

基于高非线性光子晶体光纤Sagnac环形镜的全光开关

设计了一种新颖的、低开关功率的全光开关. 将高非线性光子晶体光纤和双向抽运掺饵光纤放大器引入Sagnac环形镜内，破坏了环形镜的对称性，利用交叉相位调制作用使反向传输的两路信号光产生非线性相移，从而实现开关效应. 理论分析表明：开关功率与放大器的增益倍数和光子晶体光纤非线性系数的积成反比，在实验中所得开关功率约40 mW，消光比约为15.9 dB，并且信号光透过率随脉冲控制光峰值功率呈余弦变化，实验结果与理论分析相吻合. 关键词： 全光开关 高非线性光子晶体光纤 环形镜 交叉相位调制     

有理数谐波主被动锁模掺铒光纤激光器

在理论上详细分析了利用非线性光学环形镜（NOLM）来减小输出脉冲幅度波动,消除噪声并对脉冲进行压缩整形的物理机制。在主动锁模掺铒光纤环形激光器中（AHML－EDFL）接入一个非线性光学环形镜,形成结构新颖的主被动锁模掺铒光纤激光器（APHML－EDFL）,利用非线性光学环形镜所具有的饱和吸收体功能,成功地制抑了4阶有理数谐波锁模（RHML）中较大的幅度噪声,在1GHz量级的调制频率下,由主被动锁模掺铒光纤激光器获产生重复频率为5．1GHz,幅度相当稳定的4阶有理数谐波锁模脉冲序列。     

脉冲CO2激光器峰值功率的增益饱和现象

从理论和实验的角度分析了在腔损耗调制状态下,当调制速度与ＣＯ２激光转动能级间的驰豫速度相当时,激光器输出脉冲峰值功率与增益系数间存在的非线性特性：峰值功率随增益系数的增加,存在饱和现象。这种特性是ＣＯ２Ｂ类激光器的特点,实验和理论模拟结果一致。     

一种基于非线性光纤环镜开关特性的超短光孤子产生方法

提出了一种利用非线性光纤环镜的开关特性将连续波同时转化为亮孤子和暗孤子的新方法 ,即让连续波和另一波长的调制脉冲串共同耦合入光纤环镜 ,交叉相位调制使得一部分连续波被环镜透射 ,其余部分被反射 ;再让透射波和反射波分别在反常色散光纤和正常色散光纤中传输 ,自相位调制和群速度色散之间的相互作用使得透射波和反射波分别演化为亮、暗孤子。数值计算表明 ,该方法不仅可产生脉宽比调制脉冲窄、重复频率比调制脉冲高的亮孤子和暗孤子 ,而且几乎可将全部的连续波能量转化为孤子能量。     

脉冲CO2激光器峰值功率的增益饱和现象

 从理论和实验的角度分析了在腔损耗调制状态下,当调制速度与CO₂激光转动能级间的弛豫速度相当时,激光器输出脉冲峰值功率与增益系数间存在的非线性特性：峰值功率随增益系数的增加,存在饱和现象。这种特性是CO² B-类激光器的特点,实验和理论模拟结果一致。     

基于改进非局部均值的CPMG信号去噪算法

采用低场核磁共振技术进行检测时,接收到的回波信号微弱且信噪比低,真实的信号容易淹没在背景噪声中,严重影响到后续的反演等操作的准确性．针对这一问题,提出利用非局部均值滤波算法对CPMG(Carr Purcell Meiboom Gill)回波信号进行降噪的方法．首先,对算法中至关重要的参数选择的方法进行分析,提出了利用Stein无偏风险估计的自适应参数选取方法;然后,根据回波信号的特性对算法进行改进,即利用信号点数据方差的不同,自适应地求取各点进行非局部均值滤波时的相似窗宽度;最后,求取利用最优参数进行降噪后的CPMG回波信号．对仿真数据和真实数据的反演结果对比分析表明,该改进的非局部均值滤波算法能够取得更好的滤波效果,能够获得较优的反演谱．     

Signal amplification based on the local nonlinear Mach–Zehnder interferometer

Using the phase modulation of spatial solitons, a new scheme for all-optical signal amplification has been proposed in this paper. The considered structure is composed of the nonlinear Mach–Zehnder interferometer (NMZI) with the straight control waveguide (CWG), the uniform nonlinear medium (NLM) and the linear output waveguide. The local NMZI functions like a phase shifter. The light-induced index changes in the local nonlinear MZI are responsible for the input beam routing in the uniform nonlinear medium. The coupling of the input beam to the output waveguide depends on its propagation direction in the NLM. It is shown that the signal launched at CWG can deflect the beam launched at the NMZI (input beam) and a modulated (amplified) output could be obtained at the output waveguide. Further, signal pulse may be reshaped by appropriately increasing the NLM length. In addition, amplification factor may be enhanced by increasing the NLM length and injecting an appropriate continuous wave beam along with the signal beam at CWG.     

Denoising 3D MR images by the enhanced non-local means filter for Rician noise

The non-local means (NLM) filter removes noise by calculating the weighted average of the pixels in the global area and shows superiority over existing local filter methods that only consider local neighbor pixels. This filter has been successfully extended from 2D images to 3D images and has been applied to denoising 3D magnetic resonance (MR) images. In this article, a novel filter based on the NLM filter is proposed to improve the denoising effect. Considering the characteristics of Rician noise in the MR images, denoising by the NLM filter is first performed on the squared magnitude images. Then, unbiased correcting is carried out to eliminate the biased deviation. When performing the NLM filter, the weight is calculated based on the Gaussian-filtered image to reduce the disturbance of the noise. The performance of this filter is evaluated by carrying out a qualitative and quantitative comparison of this method with three other filters, namely, the original NLM filter, the unbiased NLM (UNLM) filter and the Rician NLM (RNLM) filter. Experimental results demonstrate that the proposed filter achieves better denoising performance over the other filters being compared.     

Two-stage non-local means filtering with adaptive smoothing parameter

Non-local means (NLM) filtering is an efficacious algorithm in image denoising which searches the similar neighborhoods and estimates the pixel by averaging these neighborhoods. Some internal parameters such as patch size, search window size and smoothing strength have serious effects on filtering performance. This paper proposes an improved version of NLM by using weak textured patches based single image noise estimation and two-stage NLM with adaptive smoothing parameter. Our proposed method firstly applies weak textured patches based noise estimation to achieve the noise level of input noisy image. Then relying on the estimated noise level, we apply the first stage NLM with adaptive smoothing parameter to attain a basic denoised image. After that, the basic denoised image is refined by the second stage of NLM with smaller smoothing strength. Our experimental results show that the proposed algorithm outperforms the NLM and some NLM recent variants both in visual quality and numerical measures. Additionally, the potential halo effect is almost eliminated in the result images produced by our proposed method.     

2R regeneration study in a microcavity with a saturable absorber

We theoretically study the dynamical response of a saturable absorber (SA) in a microcavity realizing a non-linear mirror (NLM). We compare the effects of the SA response time on the extinction ratio of a single pulse crossing a single NLM and a two NLM based device. We also study 2R regeneration of a 40 Gbit/s pulses train with a single NLM.     

基于非局部平均的多光谱遥感图像除噪声

非局部平均除噪声的方法合理利用了图像自身的冗余性和邻域的相似性,可以获得非常好的除噪声的效果。但是目前大多关于非局部平均算法的研究主要集中在对单波段图像的除噪声方面。单独平滑多光谱遥感图像的每个波段会比较严重地损失图像的光谱特征。为此,文章提出了两方面的改进:首先,改进了非局部平均的平滑核函数,让核函数中的加权系数与每个波段建立联系而不是只涉及单一波段;其次,引入相关系数来衡量不同像素邻域的光谱相似性,并把这种光谱相似性作为非局部平均平滑约束的一部分。通过两方面的改进,传统的非局部平均的方法可以适应多光谱遥感图像的平滑除噪声。最后用不同卫星图像在不同的噪声水平下对算法进行了充分的测试,实验证明本文提出的方法更好的平滑掉了噪声而且更好的保持了图像的光谱特征。     

Mechanisms for producing lattice absorption: One or two?

Two mechanisms are generally recognized for producing infrared absorption in crystals (beyond the infinitely sharp, temperature-independent absorption at the “Reststrahl” or “T.O.” frequency). They are anharmonicity (AH) of the potential and a non-linear electric moment (NLM) induced by the ionic displacements. We argue that the two mechanisms are not independent but closely related, being both physically based on charge distortion. We show that presence of a NLM invariably implies existence of AH; conversely, AH implies an NLM whenever extended, rather than only point, charges exist in the lattice. Implications for attempts to separate the two mechanisms experimentally, or for theories that study the interaction of the two effects, are discussed.     

High-power diode-pumped nonlinear mirror mode-locked Nd:YVO4 laser with periodically-poled KTP

We demonstrate a high-power nonlinear mirror (NLM) mode-locked Nd:YVO₄ laser with a periodically poled KTP (PPKTP). With a 10-mm-long PPKTP crystal, 5.6 W of average power with 20-ps of pulse duration was generated at 18-W of pump power. Compared with conventional type-II KTP crystal with the same length, the stability against the Q-switched mode-locking (QML) is significantly increased with PPKTP in NLM laser; and the pulse duration was also considerably reduced. Received: 21 July 2000 / Revised version: 30 August 2000 / Published online: 10 January 2001     

High power modelocking of a stigmatic bounce geometry laser using a nonlinear mirror

We report the highest average power modelocking of a novel bounce geometry laser using the nonlinear mirror (NLM) technique. A diode-side pumped Nd:YVO₄ slab lasing at 1064 nm in a spatially stigmatic bounce-oscillator configuration was modelocked using a type-I phase-matched BiBO nonlinear crystal (NLC) in a NLM arrangement, producing 12 W of self-starting, continuous-wave (CW) modelocking. The system produced a pulse duration of 14 ps at a repetition rate of 110 MHz with high long-term stability and excellent beam quality, with an M ²<1.2 and highly circular beam profile. An investigation was made of the sensitivity of modelocking as a function of air dispersion, by varying the distance between the NLC and output coupler. No optical damage was observed throughout the investigation, even when the system was operated in Q-switched modelocking regime. The system exploits the advantages of NLM modelocking for sustaining high average and peak powers without the onset of optical damage.     

Diode-pumped passively mode-locked Nd:YVO4 laser at 1342 nm with periodically poled LiNbO3

In this Letter, we demonstrate a nonlinear-mirror (NLM) mode-locked diode-pumped solid-state Nd:YVO4 laser operating at 1342?nm, in which the NLM comprises a periodically poled LiNbO3 crystal and a dichroic mirror. The self-starting threshold for cw mode locking is 1.5?W, which is significantly lower than that of saturable absorber mode locking. An average power of 1.52?W at 1342?nm is obtained under diode pump power of 10?W at 808?nm, with the slope efficiency being up to 16.8%. The pulse width and the repetition rate of the mode-locked laser output are about 9.5?ps and 101?MHz, respectively.