Matrix-assisted laser desorption/ionization Fourier transform mass spectrometry of luteinizing hormone releasing hormone-metal ion complexes

Complexes of luteinizing hormone releasing hormone (LHRH) with divalent metal ions (Ni, Zn, Cu) have been studied by matrix-assisted laser desorption ionization (MALDI) and Fourier transform mass spectrometry. LHRH-metal complexes were detected in high abundance for all three metals from synthesized samples, particularly in negative ion mode. The mixture of the apopeptide with the metal salts yielded in most cases a very minor signal of metal-complex ions. As opposed to Ni and Zn, copper complex ions were mostly observed as Cu(I) adducts. This can be partly attributed to plume reactions of Cu(I) with the apopeptide. the Cu(II) complexes appeared only for the synthetic complex. We show how to distinguish between the contribution to the overall signal from desorbed complexes and from Cu(I) complexes formed in the MALDI plume.     

Desorption/ionization on porous silicon mass spectrometry (DIOS) of model cationized fatty acids

Desorption/ionization on porous silicon (DIOS) is a very useful technique in the case of small molecular weight compounds, compared to the matrix-assisted laser desorption ionization (MALDI). This is because MALDI generates matrix-related ions that overlap with the mass range of interest. The aim of our work was to investigate the suitability of the DIOS technique in the case of fatty acids in negative ion mode. The analysis of the chosen fatty acid models, nonadecanoic acid (C(19)H(38)O(2)) and heneicosanoic acid (C(21)H(42)O(2)), gave rise to the observation of the deprotonated monomeric species and selective cationized multimeric species. This cation selectivity was further elucidated by complementary studies based on the addition of various metals such as Ag(I), Zn(II), Fe(II), and also Cu(II). Specific behavior, depending upon the introduced metal, was highlighted by different redox reaction processes and also metastable decompositions (in PSD mode).     

Endogenous arene hydroxylation promoted by copper(I) cluster helicates

A novel neutral triple-stranded hexanuclear copper(I) cluster helicate [Cu(I)(6)L(3)]·2CH(3)CN derived from a thiosemicarbazone ligand could be synthesized and crystallographically characterized. The MALDI mass spectrum of this complex suggests that the tetranuclear copper(I) cluster helicate [Cu(I)(4)L(2)] is also present in solution. These copper(I) cluster helicates are capable, in the presence of O(2), of hydroxylating the arene linker of their supporting ligand strands. The resulting dinuclear complex [Cu(II)(2)L'(OH)] is formed by two copper(II) centers, a new ligand arising from the hydroxylation reaction, and one hydroxide group. The magnetic investigation of this compound shows a strong antiferromagnetic coupling between the two Cu(II) centers. The kinetic studies for the hydroxylation process show values of ΔH(≠)=-70 kJ mol(-1), similar to those mediated by the tyrosinase enzymes.     

Investigation of a Cu(II)-poly(gamma-glutamic acid) complex in aqueous solution and its insulin-mimetic activity

The complexation between cupric ions (Cu(II)) and poly(gamma-glutamic acid) (gamma-PGA) in aqueous solutions (pH 3-11) has been studied by UV-visible absorption and electron spin resonance (ESR) techniques. Formation of the Cu(II)-gamma-PGA complex is confirmed by the observation of the blue shift of the absorption band in the visible region, anisotropic line shapes in the ESR spectrum at room temperature, and a computer simulation of the visible absorption spectrum of the complex. The structure of the Cu(II)-gamma-PGA complex, depending on the pH, has been determined. The in vitro insulin-mimetic activity of the Cu(II)-gamma-PGA complex is examined by determining both inhibition of free fatty acid release and glucose uptake in isolated rat adipocytes treated with epinephrine, in which the concentration of the Cu(II)-gamma-PGA complex for 50% inhibition of free fatty acid release is very similar to that of CuSO4. However, it is significantly lower than that of a previously reported insulin-mimetic bis(3-hydroxypicolinato)copper(II), [Cu(3hpic)2], complex.     

Copper(I) chloride: a simple salt for enhancement of polystyrene cationization in matrix-assisted laser desorption/ionization mass spectrometry

The possibility of using copper(I) chloride as a doping salt to enhance the cationization of polystyrene in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) was investigated. It was shown that copper(I) chloride possesses sufficient solubility in tetrahydrofuran. The parameters of the MALDI mass spectra of different polystyrene samples, such as the number-average (M(n)) and mass-average (M(w)) molecular mass values, obtained by copper(I) cationization were compared with those obtained by means of silver(I) cationization, and good agreement was found. It was also shown that application of copper(I) chloride as a doping salt, and dithranol as a matrix, ensured good MALDI mass spectra of the sample spots even after storage for 1 month.     

The reduction of copper in porous matrices--the role of electrostatic stabilisation

The redox properties of Cu(II) species in FAU matrices have been studied by temperature programmed reduction (TPR) in hydrogen and by XAFS analysis of the products obtained after (stationary) reduction treatments at various temperatures. The influence of the matrix polarity was investigated by comparing aluminosilicate FAU (Y zeolite) with siliceous FAU. In addition, the influence of Zn ions on the reduction process was studied. It was found that both the matrix composition and the presence of zinc ions exert a significant influence on the course of the reduction. In Y zeolite, heat treatment which is known to transfer Cu(II) ions to remote sites (SI, SI', SII') affects the reduction process dramatically. Cu(II) is most easily reduced in siliceous FAU, but the reduction proceeds in two clearly separated steps. Between these steps, small Cu(0) nuclei coexist with Cu(I) species, apparently unable to activate hydrogen for the autocatalytic reduction of the remaining Cu ions. The polarity of the matrix causes an upshift of the Cu(II) reduction temperature (in TPR by ca. 80 K for sites in the large cavity, by ca. 105 K for the remote sites), but the reduction of Cu(I) depends strongly on the simultaneous presence of Cu(0) and on its ability to activate hydrogen and induce an autocatalytic reduction mechanism. While Cu(I) species in the large cavities are easily reduced to the metal, tending to segregate from the zeolite lattice, Cu(I) ions in remote sites are strongly stabilized towards further reduction and even traces of Cu metal form only at very high temperatures. In the presence of zinc ions, the Cu metal particles formed were found to be smaller than in zinc-free samples.     

An electrochemical study on interaction of copper ions with three isomers,picolinic, nicotinic and isonicotinic acids at physiological pH

The electrochemical behaviors of copper ions complexed with picolinic, nicotinic and isonicotinic acids (2-, 3- and 4-pyridinecarboxylic acids) in Britton–Robinson buffer (pH 7.4) was studied by polarographic and voltammetric techniques on a mercury electrode. This study showed that the reduction of complexed copper ions in the presence of nicotinic acid (NA) was carried out in two one-electron steps [Cu(II)/Cu(I) and Cu(I)/Cu(0)] whereas this cathodic process in the presence of picolinic acid (PA) or isonicotinic acid (INA) occurred in one two-electron step [Cu(II)/Cu(0)]. The stability of the Cu(I) complex can be sourced from the positions of carboxylate substituents on these isomeric ligands, binding to the copper center.     

Functional monomers and polymers. LIX. Properties and function of Cu(II) complexes of the copolymers having pendant sulfide and imidazolyl groups

The Cu(II) complexes of copolymers having pendant sulfide and imidazolyl groups were prepared by a free radical copolymerization of ethylvinylsulfide with vinylimidazole, and their properties and function were studied spectrophotometrically in comparison with those of poly[4(5)-vinylimidazole]. The complexes were found to be effective as catalysts for the oxidation of hydroquinone. Visible and ESR spectra of the Cu(II)-copolymer complexes were similar to those of the Cu(II)-homopolymer complexes, while the catalytic activity for the oxidation was different between these complex systems. A rapid reaction followed by a slow reaction, particularly at high ethylvinylsulfide content in the copolymers, was observed in the Cu(II)-copolymer complex systems, but a continuous reaction proportional to the reaction time was observed in the Cu(II)-homopolymer complex systems. The reoxidation rate of Cu(I) to Cu(II) complex, which was little affected by the concentration of imidazolyl group, decreased with a rise of the ethylvinylsulfide content in the copolymer. It was suggested that the sulfur atom of the sulfide group was weakly coordinated to Cu(II) but strongly to Cu(I), and an electron transfer reaction from substrate to the Cu(II) complex was increased, while reoxidation reaction of the Cu(I) complex was decreased in the copolymer complex systems.     

Physical parameters and electron-transfer kinetics of the copper(II/I) complex with the macrocyclic sexadentate ligand [18]aneS6

The electron-transfer kinetics of the complex formed by copper(II/I) with the sexadentate macrocyclic ligand 1,4,7,10,13,16-hexathiacyclooctadecane ([18]aneS6) have been measured in acetonitrile with a series of three oxidizing agents and three reducing agents. These studies have been supplemented by determinations of the redox potential and the stability constants of the Cu(I)- and Cu(II)([18]aneS6) complexes in both acetonitrile and aqueous solution. The Marcus cross relationship has been applied to the cross-reaction rate constants for the six reactions studied to resolve the electron self-exchange rate constant for the Cu(II/I)([18]aneS6) complex. An average value of k11 = 3 x 10(3) M(-1) s(-1) was obtained at 25 degrees C, mu = 0.10 M in acetonitrile. This value is approximately 2 orders of magnitude smaller than the values reported previously for the corresponding Cu(II/I) complexes with the quadridentate and quinquedentate homoleptic homologues having all ethylene bridges, namely, 1,4,7,10-tetrathiacyclododecane ([12]aneS4) and 1,4,7,10,13-pentathiacyclopentadecane ([15]aneS5). This significant difference in reactivity is attributed to the greater rearrangement in the geometry of the inner-coordination sphere that accompanies electron transfer in the Cu(II/I)([18]aneS6) system, wherein two Cu-S bonds are ruptured upon reduction. In contrast to other Cu(II/I) complexes with macrocyclic polythiaethers that have self-exchange rate constants within the same range, no evidence for conformationally gated electron transfer was observed, even in the case of the most rapid oxidation reaction studied.     

Spectroscopic studies of copper(II) and iron(II) complexes of adriamycin

The complexes of adriamycin (ADM) with Cu(II) and Fe(II) have been studied by visible absorption, circular dichroism (CD) and fluorescence spectra, respectively. In Tris buffer at pH 7.0, either metal ions forms a single species with adriamycin: Cu(ADM)2 or Fe(ADM)3. Interaction of these two complexes with various biological molecules has been examined. It is shown that some amino acids, glutathione and albumin are able to remove the Cu(II) ion from Cu(II)-ADM complex, releasing the free drug. However, Fe(II)-ADM keeps in an undissociated form under the same conditions. The possibility of Fe(II) ADM as a new alternative drug has been discussed.     

Use of surface-modified CdTe quantum dots as fluorescent probes in sensing mercury (II)

Thioglycolic acid (TGA)-capped CdTe quantum dots (QDs) were synthesized in aqueous medium, and their interaction with metal cations was studied with UV-vis absorption, steady-state and time-resolved fluorescence spectra. The results demonstrated that Hg(II), Cu(II) and Ag(I) could effectively quench the QD emission based on different action mechanisms: Cu(II) and Ag(I) quenched CdTe QDs because they bound onto particle surface and facilitated non-radiative electron/hole recombination annihilation of QDs; electron transfer process between the capping ligands and Hg(II) was mainly responsible for the remarkable quenching effect of Hg(II). To prevent the approach of metal cations to QD core, the original TGA-capped CdTe QDs were further coated by denatured bovine serum albumin (dBSA). It was found that the dBSA-coated CdTe QDs could be quenched effectively by Hg(II), but Cu(II) and Ag(I) could hardly quench the QDs even at fairly higher concentration levels because the dBSA shell layer effectively prevented the binding of metal cations onto the QD core. On the basis of this fact, a simple, rapid and specific method for Hg(II) determination was proposed. Under optimal conditions, the quenched fluorescence intensity increased linearly with the concentration of Hg(II) ranging from 0.012 x 10(-6) to 1.5 x 10(-6) mol L(-1). The limit of detection for Hg(II) was 4.0 x 10(-9) mol L(-1). The developed method was successfully applied to the detection of trace Hg(II) in real samples.     

Atmospheric pressure chemical ionization mass spectrometric and visible spectrophotometric studies of copper(I) and copper(II) complexes with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol.

Complexes of copper(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) formed in aqueous methanol in a wide range of pH (from acidic to alkaline) as well as copper(I)-5-Br-PADAP species formed in methanolic solutions were investigated by spectrophotometry and mass spectrometry. Pseudomolecular and fragment ions created in the atmospheric pressure chemical ionization (APCI) source confirmed the molecular masses of the complexes existing in the solvents and their structures. The structure of the Cu(II) complex with 5-Br-PADAP formed in acidic medium was proposed as CuR(R - H) (where R is the undissociated molecule of the reagent). The binding sites of the two bound reagent molecules were different: in one of them the oxygen atom of the dissociated phenolic group and the nitrogen atom from the azo (-N=N-) group took part in complex formation, whereas in the other only nitrogen atoms from the pyridyl ring and azo group were involved. The complex was stable and could not be reduced to Cu(I) species by use of standard reducing agents (ascorbic acid, hydroxylamine). In alkaline solutions the complex tended to polymerize and precipitated in media containing less than 80% of methanol. The copper(I)-5-Br-PADAP complex was extremely unstable and could be obtained (as a mixture with Cu(II) species) in media free of water or oxygen. For this complex, CuR(2) was proposed as the most probable structure. According to this proposal copper(I) reacted exclusively with nitrogen-containing binding sites and the undissociated phenolic group was not engaged in complex formation. In this system Cu(I)/Cu(II) electron transfer is very rapid, accelerated by a polar environment, e.g. in the presence of water molecules or dissolved oxygen.     

Indirect determination of thiocyanate with ammonium sulfate and ethanol by extraction-flotation of copper

A new method for the indirect determination of thiocyanate with ammonium sulfate and ethanol by extraction-flotation of copper in the presence of ascorbic acid is described. A small amount of Cu(II) is reduced to Cu(I) by ascorbic acid, then Cu(I) is precipitated with SCN-. In the course of phase separation of ethanol from water, the precipitated CuSCN stays in the interface of ethanol and water. A good linear relationship is observed between the flotation yield of Cu(II) and the amount of SCN-. Using 1.0 ml of 1 x 10(-3) M ascorbic acid solution, 50 micrograms of Cu(II), 3.5 g of (NH4)2SO4 and 3.0 ml of ethanol with a total volume of 10 ml, the concentration of thiocyanate could then be determined by determining the flotation yield of Cu(II). The detection limit for thiocyanate is 5 x 10(-5) M. Every parameter was optimized and the reaction mechanism was studied. The method is simple and rapid and it was successfully applied to the determination of thiocyanate in urine and saliva of smokers and non-smokers and in venous blood of patients infused with sodium nitroprusside.     

Site-specific interactions of Cu(II) with alpha and beta-synuclein: bridging the molecular gap between metal binding and aggregation

The aggregation of alpha-synuclein (AS) is a critical step in the etiology of Parkinson's disease (PD) and other neurodegenerative synucleinopathies. Protein-metal interactions play a critical role in AS aggregation and might represent the link between the pathological processes of protein aggregation and oxidative damage. Our previous studies established a hierarchy in AS-metal ion interactions, where Cu(II) binds specifically to the protein and triggers its aggregation under conditions that might be relevant for the development of PD. In this work, we have addressed unresolved structural details related to the binding specificity of Cu(II) through the design of site-directed and domain-truncated mutants of AS and by the characterization of the metal-binding features of its natural homologue beta-synuclein (BS). The structural properties of the Cu(II) complexes were determined by the combined application of nuclear magnetic resonance, electron paramagnetic resonance, UV-vis, circular dichroism spectroscopy, and matrix-assisted laser desorption ionization mass spectrometry (MALDI MS). Two independent, noninteracting copper-binding sites with significantly different affinities for the metal ion were detected in the N-terminal regions of AS and BS. MALDI MS provided unique evidence for the direct involvement of Met1 as the primary anchoring residue for Cu(II) in both proteins. Comparative spectroscopic analysis of the two proteins allowed us to deconvolute the Cu(II) binding modes and unequivocally assign the higher-affinity site to the N-terminal amino group of Met1 and the lower-affinity site to the imidazol ring of the sole His residue. Through the use of competitive chelators, the affinity of the first equivalent of bound Cu(II) was accurately determined to be in the submicromolar range for both AS and BS. Our results prove that Cu(II) binding in the C-terminal region of synucleins represents a nonspecific, very low affinity process. These new insights into the bioinorganic chemistry of PD are central to an understanding of the role of Cu(II) in the fibrillization process of AS and have implications for the molecular mechanism by which BS might inhibit AS amyloid assembly.     

Reduction of organic dyes in matrix-assisted laser desorption/ionization and desorption/ionization on porous silicon

Reduction of analytes in matrix-assisted laser desorption/ionization (MALDI) often obscures the actual determination of molecular structure. To address the redox reactions in laser desorption/ionization processes, the organic dyes Methylene Blue, Janus Green B, Crystal Violet and Rhodamine B were analyzed by MALDI or by desorption/ionization on porous silicon (DIOS). Susceptibility to reduction in MALDI was dependent on both the reduction potentials of analytes and the molar ratio of analyte to matrix molecules. Addition of Cu(II) ions as an electron scavenger suppressed the reduction of Methylene Blue in MALDI. The results suggested that electron transfer to analytes from the sample target and/or from the matrix contributed to the reduction. In DIOS, the reductions of organic dyes were more prominent than in MALDI, and were not prevented by Cu(II) ion doping, probably due to direct contact of the analytes with silicon which had little electric resistance.     

Disappearance of interfering alkali-metal adducted peaks from matrix-assisted laser desorption/ionization mass spectra of peptides with serine addition to alpha-cyano-4-hydroxycinnamic acid matrix

It has been described that ion yield in both positive- and negative-ion matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) of peptides is often inhibited by trace amounts of alkali metals and that the MALDI mass spectra are contaminated by the interfering peaks originating from traces of alkali metals, even when sample preparation is carefully performed. Addition of serine to the commonly used MALDI matrix alpha-cyano-4-hydroxycinnamic acid (CHCA) significantly improved and enhanced the signals of both protonated and deprotonated peptides, [M+H](+) and [M-H](-). The addition of serine to CHCA matrix eliminated the alkali-metal ion adducts, [M+Na](+) and [M+K](+), and the CHCA cluster ions from the mass spectra. Serine and serinephosphate as additives to CHCA enhanced and improved the formation of molecular-related ions of phosphopeptides in negative-ion MALDI mass spectra.     

Mass spectral behavior of some homoleptic and mixed aryldichalcogenide bis(diphenylphosphino)ferrocenenickel(II), palladium(II), and platinum(II), and bis(diisopropylphosphino)ferrocenepalladium(II) complexes

The mass spectral behavior of a number of organometallic complexes containing the Group 10 metals Ni, Pd, and Pt, together with various thiolate ligands were studied. For Pd, two main types of complexes, differing by the substituents on the phosphorus atom were studied. Types I and II were substituted with bis(diphenylphosphino)ferrocene and bis(diisopropylphosphino)ferrocene ligands, respectively. The Ni complexes, except for one, and the Pd Type I complexes had no molecular radical cations (M(+.)) in their EI spectra. On the other hand, all the Pt complexes showed intense M(+.) ions in their EI spectra indicating that these complexes were more stable as radical cations than those of Ni and Pd. The FAB and MALDI spectra of all the complexes displayed intense quasi-molecular ions (MH(+)) and the fragmentations in both modes were similar. The MALDI spectra of several complexes displayed only M(+.) ions while one gave evidence of both MH(+) and M(+.) ions. Several Pd Type II complexes yielded intense M(+.) in their EI spectra.     

Density functional study of the O2 binding to [CuI(TPAR)]+ (TPA = tris(2-pyridylmethyl)amine) in THF and EtCN

Density functional theory using the B3LYP hybrid functional has been employed to study the formation of [Cu(II)(TPA(H))(O2-)]+ and [Cu(II)(TPA(MeO))(O2-)]+ (TPA = tris(2-pyridylmethyl)amine) in two different solvents, THF and EtCN. The thermodynamics of solvent coordination as well as that of the overall reactions with O2 has been computed. The formations of [Cu(II)(TPA(H))(O2-)]+ in THF and of [Cu(II)(TPA(MeO))(O2-)]+ in both THF and EtCN are found to be initiated from the [Cu(I)(TPA(R))]+ species, that is, the Cu complex possessing an empty coordination site. In contrast, the formation of [Cu(II)(TPA(H))(O2-)]+ in EtCN is found to be initiated from the [Cu(I)(TPA(H))(EtCN)]+ species, that is, one solvent molecule being coordinated to Cu(I). In general, good agreement is found between theoretical and experimental results. The high accuracy of the B3LYP functional in reproducing experimental thermodynamic data for the present type of transition metal complexes is demonstrated by the fact that the differences between measured and computed thermodynamic parameters (DeltaG degree, DeltaH degrees , and -TDeltaS degree, in most cases are less than 2.0 kcal mol(-1). An attempt was made to investigate the kinetics of the formation of [Cu(II)(TPA(H))(O2-)]+ in THF and EtCN. Computed free energies of activation, DeltaG, are in good agreement with experimental results. However, an analysis of the partitioning of the free energy barriers in enthalpic and entropic contributions indicates that the computationally studied reaction pathway might differ from the one observed experimentally.     

Coordination-synchronized trans-cis photoisomerization of bipyridylazobenzene driven by a Cu(II)/Cu(I) redox change

The trans-cis photoisomerization behavior of azobenzene-bipyridine ligand (dmpAB) was synchronized with coordination of the bipyridine moiety to copper. The coordination reaction can be reversibly controlled with reversible redox reaction of copper, to afford [Cu(dmpAB)(2)](+) in Cu(I) state and free dmpAB in Cu(II) state. UV irradiations to Cu(I) and Cu(II) samples form trans-rich and cis-rich compositions, respectively. The results enable us to control the trans-cis isomerization reversibly through Cu(II)/Cu(I) redox and a single UV light.     

Metal chelates in vinyl polymerization: Bulk polymerization of acrylonitrile initiated by Cu(II)–imine complexes

This article deals with the kinetics and mechanism of acrylonitrile (AN) polymerization initiated by Cu(II)–4-anilino 3-pentene 2-one[Cu(II)ANIPO], Cu(II)–4-p-toluedeno 3-pentene 2-one [Cu(II)TPO], and Cu(II)–4-p-nitroanilino 3-pentene 2-one [Cu(II)NAPO] in bulk at 60°C. The polymerization is free radical in nature. The exponent of initiator(I) is ? 0.5. The initiation step is a complex formation between the chelate and monomer and subsequent decomposition of the intermediate complex giving rise to free radical and Cu(I). This is substantiated by ultraviolet (UV) and electron spin resonance (ESR) studies. The activation energies and kinetic and chain transfer constants have also been evaluated.