用SDFT实现FSK调制信号的数字解调方法

提出了一种新的FSK调制信号数字化解调的方法,该方法以移位离散傅立叶变换SDFT(Shifted Discrete Fourier Transforms)为基础。文中给出了一个8FSK信号进行数字化解调的仿真结果,计算机仿真结果表明,该方法能在较低信噪比(SNR)和较大多普勒频移条件下解调FSK信号,并具有较好的解调性能。     

基于FPGA的2FSK数字信号调制解调

基于FPGA的调制和解调的数字信号有多种,包括2ASK、2FSK、2PSK等,文中介绍了2FSK信号的调制与解调,以及该信号的功率谱。最后提供验证结果,证明仿真结果符合要求。     

一种2FSK解调器的VHDL实现

文中首先介绍调制、解调的原理，以及FSK信号的过零检测法，并对MAXPLUS2软件进行简单介绍，然后重点介绍FSK解调器的实现方法，最后通过MAXPLUS2对代码进行仿真，并实现对FSK信号的解调。     

基于DSP Builder的2FSK调制解调器设计

根据2FSK调制解调器的基本理论,采用DDS(直接数字合成)技术在不同频率信号的切换时能保持相位连续的优点来设计2FSK调制模型,采用自延迟解调法设计了2FSK的解调模型。然后利用Simulink下的DSP Builder工具箱搭建了这两个模型,并在Matlab/Simulink下对此模型进行了仿真,验证了模型的正确性。此设计可以简化2FSK调制解调器系统的硬件电路,提高系统的可靠性与灵活性,而且成本低、修改方便,对硬件理论知识要求不高,实现起来容易。     

二进制相移键控调制解调的仿真分析

本论文通过MATLAB仿真设计程序,实现信号的2PSK调制解调的程序仿真。误码率是衡量一个数字通信系统性能的重要指标,预测对比各个解调方式的误码率结果,包括相干ASK、非相干ASK、相干FSK以及非相干FSK与PSK,结果表明在抗加性高斯白噪声方面,2PSK性能最好,2FSK次之,2ASK最差。     

基于VHDL的2FSK调制解调器设计

在数字通信系统中,数字调制与解调技术占有非常重要的地位。文中介绍了FSK调制解调的基本原理,用VHDL语言实现了2FSK调制解调器的设计,整个系统设计在MAX+plusII开发平台上进行编译仿真,最后在EPM7032LC44-15目标芯片上实现。仿真结果表明此设计方案是可行的,系统具有较高的实用性和可靠性。     

一种FSK反正切差分解调方法

针对频移键控在通信系统应用中其调制解调技术在一定程度上直接影响通信系统的性能,提出了一种FSK数字解调方法,称作反正切差分解调.该方法基于正交反正切算法,正交信号直接相除消除了幅度调制成分.新的方法适用于窄带和宽带的FSK信号并适合于数字接收机.仿真结果表明,该技术能有效解调FSK信号,并适合于多种制式的FSK信号.     

基于MATLAB/Simulink混沌信号的2FSK调制解调仿真

构建基于MATLAB/Simulink的2FSK调制解调仿真系统;分析混沌信号的特征机理,针对混沌正弦波信号调制与解调,使其运行的仿真波形与随机正弦波一致,验证此仿真系统针对混沌信号的正确性。     

基于SystemView的2FSK调制解调系统的仿真设计与分析

SystemView是一种适用于通信系统设计与仿真分析的软件工具,可以对通信系统的工作过程进行实时仿真分析。本文采用SystemView构建2FSK调制解调仿真系统。通过使用SystemView分析窗口观察信号的波形和频谱,我们能直接观测到信号在传输过程中的波形和频谱的变化,这有助于我们更深刻地理解2FSK调制解调系统的工作原理和各个设备的功能。     

基于软件无线电的2FSK相干解调

为检验软件无线电平台的优越性,提出基于软件无线电的采用相干解调法解调2FSK信号的方法.根据2FSK的调制解调原理,学习Matlab/Simulink软件中的模块,并利用模块搭建模型,对各模块的参数进行设计,在软件中仿真通过,并将模型通过协同仿真生成源代码下载到软件无线电平台上.相干解调法需要载波同步,从而使解调设备相对复杂.所设计的电路经过软件仿真的信号与发送信号一致,硬件验证协同仿真后的信号与发送信号一致,证明电路工作准确可靠,达到了预期效果.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.