Fullerene lipids: Synthesis of novel nitrogen-bridged [60]fullerene fatty ester derivatives

Reactions of methyl 6-azido-hexanoate, 8-azido-octanoate, and 12-azido-dodecanoate with [60]fullerene (1) gave the corresponding aza-[60]fullerene ester derivatives (2a-2c, 22–35% based on the amount of [60]fullerene reacted). The nitrogen atom is bonded to the [60]fullerene cage to yield a “[5,6]-open” type aza substructure. This was confirmed by the appearance of 30–31 sp ² signals at δ_C 133–147 in the carbon nuclear magnetic resonance spectra. Reaction of methyl 11-azido-7-undecynoate with [60]fullerene furnished a mixture of aza-[60]fullerene (2d, 53%) and aziridine-[60]fullerene (2e, 38%) ester derivatives. Compound 2e was identified as the “[6,6]-closed” type aziridine-[60]fullerene derivative, which displayed 10 sp ² signals in the region δ_C 140–145 and one signal at δ_C 85.05 for the sp ³ carbons of the cage. Refluxing a solution of compound 2d in toluene for 50 h gave about 50% yield of compound 2e, but not vice versa.     

Chemoenzymatic synthesis of structured triacylglycerols containing eicosapentaenoic and docosahexaenoic acids

There are indications in the recent literature that the location of polyunsaturated fatty acids, such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), in triacylglycerols (TAG) may influence their oxidative stability. To address that question, two types of structured lipids were designed and synthesized: firstly, a TAG molecule possessing pure EPA or DHA at the mid-position with stearic acid at the outer positions; and secondly, a TAG molecule possessing pure EPA or DHA located at one of the outer positions with stearic acid at the mid-position and the remaining end position. The former adduct was synthesized in two steps by a chemoenzymatic approach. In the first step 1,3-distearolyglycerol was afforded in good yield (74%) by esterifying glycerol with two equivalents of stearic acid in ether in the presence of silica gel using Lipozyme^TM as a biocatalyst. This was followed by a subsequent chemical esterification with pure EPA or DHA using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide as a coupling agent in the presence of 4-dimethylaminopyridine in dichloromethane in excellent yields (94 and 91, respectively). The latter adduct was synthesized in two enzymatic steps. In the first step tristearoylglycerol was prepared in very high yield (88%) by esterifying glycerol with a stoichiometric amount of stearic acid under vacuum at 70–75°C using an immobilized Candida antarctica lipase without a solvent. That adduct was subsequently treated in an acidolysis reaction with two equivalents of EPA or DHA without solvent at 70–75°C or in toluene at 40°C in the presence of Lipozyme to afford the desired product in moderate yields (44 and 29%, respectively). This work was presented at the Biocatalysis Symposium in April 2000, held at the 91st Annual Meeting and Expo of the American Oil Chemists’ Society, San Diego, CA.     

Lipase-catalyzed synthesis of structured low-calorie triacylglycerols

Because of their unique fatty acid specificities and regioselectivities, lipases have been found to be effective catalysts for the synthesis of structured lipids that have a predetermined composition and distribution of fatty acyl groups on the glycerol backbone. The prospective plant-derived lipase found in the exudate of Carica papaya is known for its shortchain acyl group specificity, 1,3-glycerol regioselectivity, and sn-3 stereoselectivity. Carica papaya latex (CPL) was therefore examined for its potential ability to synthesize structured lowcalorie short- and long-chain triacylglycerols (SLCT). In this paper, we describe the utility of CPL in the lipase-catalyzed interesterification reaction of triacetin and hydrogenated soybean oil. Normal-phase high-performance liquid chromatography, combined with mass spectrometry, was used to distinguish the structured SLCT synthesized using the lipase from the corresponding SLCT produced by chemical synthesis.     

富勒烯[60]-3,5-二氯-4-吡啶酮衍生物的合成研究

以3,5-二氯-4-吡啶酮为原料,与对甲苯磺酰肼发生缩合反应生成3,5-二氯-4-吡啶酮对甲苯磺酰腙、再与富勒烯[60]发生[2+1]环加成反应,制备了富勒烯[60]-3,5-二氯-4-吡啶酮衍生物,总产率35.6%。探索了富勒烯[60]与酰腙发生环加成反应的最佳工艺条件。产物结构经IR,1HNMR,MS表征。     

Carica papaya latex-catalyzed synthesis of structured triacylglycerols

One impediment to the industrial use of enzymes in fat and oil transformations is the higher cost often associated with an enzymatic process compared with the corresponding chemical process. Processes that utilize plant enzymes, however, may have advantages because of their lower cost and ready availability. One example of such a plant-derived enzyme is Carica papaya latex (CPL), the principal source of the protease papain. Recently, it has been shown that this latex also catalyzes the lipolysis of triacylglycerols and that this latex lipase has a selectivity for short-chain acyl groups as well as a 1,3-glycerol selectivity. These selectivities can be used in the synthesis of structured triacylglycerols. In this paper we describe the utility of CPL in lipase-catalyzed reactions, specifically the synthesis of low-calorie triacylglycerol analogs. Presented in part at the American Oil Chemists’ Society’s 88th Annual Meeting & Expo, Seattle, WA, May 1997.     

Polymeric fullerene oxide films produced by decomposition of hexanitro[60]fullerene

A new poly(fullerene oxide) thin film material has been fabricated by thermal activation and electron bombardment on hexanitro[60]fullerene (HNF) film deposited on a Au substrate, all under vacuum conditions. The reaction products in the polymerization process are analyzed by XPS, UPS, IR, TGA-MS and LDI-MS techniques. It is found that the main effect of thermal and radiation treatments is to induce cleavage of -NO bonds from HNF molecules resulted in the release of nitric oxide gas and the formation of fullerene-bound oxyradicals, C₆₀-O₆. Spectroscopic evidence strongly suggests that rearrangement of fullerenic nitro moieties into nitrito groups is involved in the HNF decomposition process prior to the generation of reactive oxyradical intermediates. Consequently, the intermolecular coupling reaction of these oxyradicals leads to carbon polymer networks containing oxygen-bridged fullerenes. The thermally generated polymeric thin film is stable up to 900 K. Electron bombardment is also effective in both the decomposition of -NO₂ groups and the removal of -OH groups present in HNF films. UV irradiation at 365 nm alone is shown to be not as efficient for the polymer formation.     

[60]富勒烯[2+1]环加成反应研究进展

对[60]富勒烯的[2 1]环加成反应、主要试剂及反应机理进行了综述。     

Synthesis and explosive decomposition of polynitro[60]fullerene

Prolonged treatment of C₆₀ in benzene with very high concentrations of N₂O₄ leads to a new polynitro[60]fullerene whose composition was determined as C₆₀(NO₂)₁₄ by thermogravimetric analysis. The compound is unstable and deflagrates above 170 °C when heated under nitrogen or in air with the release of a considerable amount of heat as observed by the differential thermal analysis and as measured by differential scanning calorimetry. The decomposition steps of C₆₀(NO₂)₁₄ were followed by the thermogravimetric analysis coupled with Fourier-transform infrared spectroscopy analytical technique. At the deflagration point C₆₀(NO₂)₁₄ releases a mixture of nitrogen oxides: NO₂ and NO with minor amounts of N₂O. The deflagration leaves a residue of oxidized carbon which by heating releases CO₂ and CO and at 700 °C is reduced to a carbonaceous matter free from residual oxygenated groups showing also the presence of small amounts (⩽10%) of C₆₀ fullerene.     

On an improved pyrolytic synthesis of [60]- and [70]-fullerene

The nickel-catalyzed pyrolysis of two fullerene precursors — (1) naphthalene and (2) 1-bromonaphthalene — at 1200°C in an argon atmosphere has been investigated. Fullerenes, polycyclic aromatic hydrocarbons (PAHs), and polycyclic aromatic brominated species (the latter obtained in pyrolysis of 1-bromonaphthalene only) were extracted from the pyrolysates by reflux in toluene. The toluene extracts were subjected to mass spectrometric analysis using the chemical ionization technique in the negative mode. Mass spectra are included with discussions on fullerene yields and on the mechanism by which fullerenes are formed in pyrolysis. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the toluene-insoluble material.     

Solvent-free enzymatic synthesis of structured lipids containing CLA from coconut oil and tricaprylin

Lipase-catalyzed acidolysis of different TAG with CLA was performed to produce structured lipids (SL) containing CLA. An immobilized lipase from Mucor miehei (Lipozyme IM, Novo Nordisk Inc., Franklinton, NC) was used as the biocatalyst in a solvent-free system. Conconut oil and tricaprylin, which are sources of medium-chain FA, were the starting substrates, and a mixture of FFA (MFFA) containing 73% CLA was the donor of the acyl groups. For each TAG, four different ratios of TAG/MFFA were blended to prepare about 500 g of mixture containing 10, 20, 30, and 40% CLA (w/w). Each blend was reacted with 5% lipase at 65°C for 48 h under nitrogen. Over the range of TAG/MFFA ratios examined, CLA was incorporated effectively by the enzyme. Lipozyme IM exhibited no special preference for any particular FA, since the incorporation of FA was proportional to their concentration in the system. FFA, PV, p-anisidine value (p-AV), iodine value (IV), and saponification number (SN) were evaluated for all the SL. FFA, PV, and p-AV depended on the purification process and showed no significant deterioration of SL with respect to the original TAG, whereas IV and SN depended on the composition of the SL, mainly the CLA content.     

微波辐射下[60]富勒烯与脱氢枞胺的加成反应

在N2保护下,脱氢枞胺(C20H31N)被四醋酸铅氧化生成的氮烯活性中间体与[60]富勒烯(C60)在氯苯溶剂中,用微波加热至130℃,反应2 h,发生[1+2]氮烯环加成反应.通过硅胶柱层析分离提纯反应混合物,得到脱氢枞胺与C60的氮烯环加成衍生物,得率为59.4%(基于已反应的C60).通过FT-IR、13C NMR、1H NMR、MALDI-TOF-MS等分析方法对该衍生物进行了结构测定,证实其主要成分为预期的单加成结构,同时存在少量的二加成结构.将微波辐射下的反应与传统的热条件下的反应进行了对比,结果表明,微波辐射可以缩短加成反应的时间,并且能有效地提高反应得率.     

Fullerene lipids: Synthesis of dialkyl 1,2-[6,6]-methano-[60]-fullerene dicarboxylate derivatives

Reaction of C₆₀ fullerene with dialkyl bromomalonate (where the alkyl groups consist of short-, medium-, and long-saturated chains or unsaturated long chains) in the presence of sodium hydride gives [6,6]-bridged mono-adducts of methanofullerene. The spectroscopic properties of such fullerenoid lipids are reported.     

Early dietary intervention with structured triacylglycerols containing docosahexaenoic acid. Effect on brain, liver, and adipose tissue lipids

Newborn rats were fed liquid diets containing 7 wt% fat in which 3.8% of the total fatty acids were 22:6n-3. The fats were either a specific structured oil with 22:6n-3 mostly located in the sn-2 position or a randomized oil with 22:6n-3 equally distributed in the triacylglycerol (TAG) molecules. The oils were manufactured by interesterification of fish oil TAG with free fatty acids from butterfat. The pups were tube-fed three times a day and stayed with their dams during the night. After 14 d they were fed solid diets containing the same oils for the next 7 d. A reference group stayed with the dams and received ordinary rat chow at weaning. In general no significant differences between the two dietary treatments were observed in the tissues examined except for adipose tissue. The levels of 22:6n-3 were significantly increased in brain phosphatidylcholines (PC) and phosphatidylserines (PS) of both experimental groups compared with the reference group after three weeks, whereas no differences were found in brain phosphatidylethanolamines (PE) and phosphatidylinositols (PI). In all groups and all phospholipids examined, the levels of 20:4n-6 generally decreased from 1 to 3 wk and were significantly lower in the experimental groups compared with the reference group at 3 wk except for PI. In liver, PC and PE 22:6n-3 remained constant in the experimental groups but decreased significantly in the reference group, whereas in liver PS 22:6n-3 increased in all groups, but reached significantly higher levels in the experimental groups than in the reference group. In adipose tissue, 22:6n-3 increased in the experimental groups during the study period, but decreased in the reference group, suggesting that a surplus of dietary 22:6n-3 was stored.     

Enzymatic synthesis of position-specific low-calorie structured lipids

An immobilized sn-1,3-specific lipase from Rhizomucor miehei (IM 60) was used to catalyze the interesterification of tristearin (C_18:0) and tricaprin (C_10:0) to produce low-calorie structured lipids (SL). Acceptable product yields were obtained from a 1:1 mole ratio of both triacylglycerols with 10% (w/w of reactants) of IM 60 in 3 mL hexane. The SL molecular species, based on total carbon number, were 44.2% C₄₁ and 40.5% C₄₉, with 3.8 and 11.5% unreacted tristearin C₅₇ and tricaprin C₂₇, respectively, remaining in the product mixture. The best yield of C₄₁ species (44.3%) was obtained with zero added water. Tricaprylin (C_8:0) was also successfully interesterified with tristearin in good yields at 1:1 mole ratio. Products were analyzed by reverse-phase high-performance liquid chromatography with an evaporative light-scattering detector. Reaction parameters, such as substrate mole ratio, enzyme load, time course, added water, reaction media, and enzyme reuse, were also investigated. Hydrolysis by pancreatic lipase revealed the specific fatty acids present at the sn-1,3 positions of SL. Biocatalysis Symposium Paper, presented at the AOCS Annual Meeting & Expo, Seattle, Washington. May 11–14, 1997.     

Development of [60] fullerene supported on silica catalysts for the photo-oxidation of alkenes

Simple or successive incipient wetness impregnation followed by heating at 180 °C is proved an efficient preparation method for dispersing effectively onto the silica surface various amounts of C₆₀ in the range 1–4% (w/w). BET, XRD, DRS, TGA, microelectrophoresis and photoluminescence have been used to characterize the photocatalysts prepared. A high dispersion was obtained for the quite stable supported C₆₀ phase, comprised mainly from relatively small or medium size C₆₀ clusters/aggregates. The photocatalytic activity was assessed in the singlet oxygen oxidation of alkenes by examining the photo-oxygenation of 2-methyl-2-heptene as a probe reaction. The catalytic tests were carried out at 0–5 °C in CH₃CN, under oxygen atmosphere and using a 300 W xenon lamp as the light source. The heterogeneous catalysts obtained were proved to be active in the photocatalytic oxidation of olefins via a ¹O₂ ene reaction. The catalysts exhibited significant conversion, turnover number and turnover frequency values, substantially higher than those achieved over the unsupported C₆₀. The conversion increases with the amount of the supported C₆₀ up to a value equal to 3% (w/w) and then it decreases whereas turnover number and turnover frequency decreases monotonically as the amount of the supported C₆₀ increases. The easy separation of these solid catalysts from the reaction mixture, the high activity and stability as well as the retained activity in subsequent catalytic cycles, make these supported catalysts suitable for a small-scale synthesis of fine chemicals.     

Enzymatic modification of triacylglycerols of high eicosapentaenoic and docosahexaenoic acids content to produce structured lipids

Immobilized lipase, IM60, from Rhizomucor miehei was used as a biocatalyst for the incorporation of capric acid (C10:0) into fish oil originally containing 40.9 mol% eicosapentaenoic (20:5n-3) and 33.0 mol% docosahexaenoic (22:6n-3) acid. Acidolysis was performed with and without organic solvent. Pancreatic lipase-catalyzed sn-2 positional analysis was performed after enzymatic modification. Tocopherol analysis was performed before and after enzymatic modification. Products were analyzed by gas-liquid chromatography. After a 24-h incubation in hexane, there was an average of 43.0±1.6 mol% incorporation of C10:0 into fish oil, while 20:5 and 22:6 decreased to 27.8±2.2 and 23.5±1.3 mol%, respectively. The solvent-free reaction produced an average of 31.8±8.5 mol% C10:0 incorporation, while 20:5 and 22:6 decreased to 33.2±3.3 and 28.3±3.9 mol%, respectively. The effect of incubation time, substrate molar ratio, enzyme load, and added water were also studied. In general, as the enzyme load, molar ratio, and incubation time increased, mol% C10:0 incorporation also increased. The optimal mol% C10:0 incorporation was 41.2% at 48 h for the reaction in hexane and 46.4% at 72 h for the solvent-free reaction. The highest C10:0 incorporation (65.4 mol%) occurred at a molar ratio of 1:8 (fish oil triacylglycerols/capric acid) in hexane. For the solvent-free reaction, the optimal mol% C10:0 incorporation (56.1 mol%) occurred at a molar ratio of 1:6. An enzyme load of 10% gave the highest mol% C10:0 incorporation (41.4 mol%) in hexane; the highest incorporation (38.3 mol%) for the solvent-free reaction occurred at 15% enzyme load. Mol% incorporation of C10:0 declined with increasing amounts of added water. The optimal mol% C10:0 incorporation occurred at 1% added water (47.9 mol%) for the reaction in hexane, and at zero added water for the solvent-free reaction (21.8 mol%). Fish oil containing capric acid was successfully produced and may be nutritionally more beneficial than unmodified oil.     

Two-step enzymatic synthesis of docosahexaenoic acid-rich symmetrically structured triacylglycerols via 2-monoacylglycerols

Symmetrically structured triacylglycerols (TG) rich in docosahexaenoic acid (DHA) with caprylic acid (CA) at the outer positions were synthesized enzymatically form bonito oil in a two-step process: (i) ethanolysis of bonito oil TG to 2-monoacylglycerols (2-MG) and fatty acid ethyl esters, and (ii) reesterification of 2-MG with ethyl caprylate. Ethanolysis catalyzed by immobilized Candida antarctica lipase (Novozym 435) yielded 92.5% 2-MG with 43.5% DHA content in 2 h. The 2-MG formed were reesterified with ethyl caprylate by immobilized Rhizomucor miehei lipase (Lipozyme IM) to give structured TG with 44.9% DHA content [based on fatty acid composition with caprylic acid (CA) excluded] in 1 h. The final structured lipids comprised 85.3% TG with two CA residues and one original fatty acid residue, 13% TG with one CA residue and two original fatty acid residues, and 1.7% tricaprylolglycerol (weight percent). The amount of TG with two CA residues and one C₂₂ residue (22∶6=DHA, 22∶5, and 22∶4) was 51 wt%. The 1,3-dicapryloyl-2-docosahexaenoylglycerol to 1,2(2,3)-dicapryloyl-3 (1)-docosahexaenoylglycerol ratio (based on high-performance liquid chromatography peak area percentages) was greater than 50∶1. The recovery of TG as structured lipids after silica gel column purification was approximately 71%. Ethyl esters and 2-MG formed at 2 h of ethanolysis could be used to determine the positional distribution of fatty acids in the intial TG owing to the high 1,3-regiospecificity of Novozym 435 and the reduced acyl migration in the system.     

含哌嗪基噻吩并[3,2-d]嘧啶类抗癌试剂的设计与合成

基于蛋白酪氨酸激酶为靶点的抗癌试剂的结构特点,设计与合成了系列含哌嗪基的噻吩并[3,2-d]嘧啶衍生物。以巯基乙酸为原料,经酯化、两次缩合成环、氯代等4步反应得4-氯噻吩并[3,2-d]嘧啶母核,再与不同的哌嗪衍生物在DMF中发生亲核取代反应,制备了4个未见报道的含哌嗪基噻吩并[3,2-d]嘧啶化合物,产物结构经1HNMR和HRMS表征。     

2-（3-羟基苯基）[60]富勒烯吡咯烷衍生物的合成及热稳定性

利用甘氨酸和3-羟基苯甲醛与C60发生1,3-偶极环加成反应,合成分离得到了2-(3-羟基苯基)[60]富勒烯吡咯烷,用UV-Vis、1H-NMR、FT-IR、MS等测试手段表征了产物的结构,并通过单因素方法,探讨了反应条件对产物产率的影响,得到最佳工艺条件:反应物摩尔比1∶3∶6,温度95℃,反应时间18h,产物的产率可达75%(以消耗的C60计)。利用差热分析仪测试了产物的热稳定性,结果表明,产物在空气中具有良好的热稳定性。