Studies on the relationship of structure and properties of the polyesterurethanes adhesives

Three series of linear segment polyurethanes (PHAU, PBAU, PEAU) based on three polyesters (PHA, PBA, PEA), MDI and butanediol were synthesized by solution polymerization. The crystallinity of these polyesters and polyurethanes and the compatibility of Blends of polyurethane (PU) with poly(vinyl chloride) (PVC) were studied by means of X-ray diffraction, DSC, DMA and phase contrast microscopy respectively. The influence of polyester type and molecular weight, the hard-segment content in PU on the crystallinity of PU and the influence of compatibility on adhesion are discussed. The results showed that, on condition that the hard-segment content was not high (< 25%), the crystallinity in PU was mainly caused by the polyester, soft-segment, which was in the order of PHA PBA PEA, and that, PBAU/PVC, PHAU/PVC were compatible systems, but PEAU/PVC was incompatible. The adhesive strength of the three adhesives was quite different from one another, with the order of PBAU PHAU PEAU. An interpretation of adhesion for the PU-PVC system by the diffusion theory is proposed.     

Segmented polyurethanes with 4,4′-bis-(6-hydroxyhexoxy) biphenyl as chain extender. I. Synthesis and characterization of 2,4-tdi-polyurethanes

Polyurethanes composed of 2,4-toluene diisocyanate (TDI), poly (butylene adipate) diols (PBA) of different molecular weights, and 4,4′-bis-(6-hydroxyhexoxy) biphenyl (BHHBP) were prepared by a two-step solution polymerization process. The polyurethanes were char-acterized by elemental analysis, NMR, and SEC. The thermal properties were investigated by DSC, DMA, and optical polarizing microscopy. Dependent on the molecular weight of the PBA, a shift in the glass transition temperature T_g of the polyurethanes has been observed by DSC and DMA. Polyurethanes based on poly (butylene adipate)s of M_n ～ 2000 exhibited a T_g nearly independent on the hard-segment content up to 50% LC hard segments, indicating the existence of mainly phase separated soft and hard segments. By shortening the PBA chain length up to 1,000 and further to 600, the T_g of the polyester soft-segment phase increases with growing hard-segment content, a consequence of enhanced interaction between the hard and soft segments. This tendency is observed to the greatest extent at polyurethanes with the shortest, polyester diol and can be interpreted as a partial miscibility or compatibility of hard and soft segments. Although in polyurethanes with PBA 2000 the mesophase can be proven at a hard-segment content of ～ 40%, its appearance in polyure-thances prepared with PBA 1000 or PBA 600 requires a hard-segment content > 60%. © 1995 John Wiley & Sons, Inc.     

Compatibilization of PBT/PP Blends by Adding Side-chain Liquid Crystalline Ionomer with Quaternary Pyridinium Groups

A side-chain liquid crystalline ionomer(SLCI) was synthesized by grafting copolymerization of 4-(4-ethoxybenzoyloxy)-4′-allyloxybiphenyl and N-allyl-pyridium bromide on polymethylhydrosiloxane. The SLCI was blended with polypropylene(PP) and polybutylene terephthalate(PBT) by melt mixing. The thermal behavior, liquid crystalline properties, morphological structure, and mechanical properties of the blends were investigated by differential scanning calorimetry(DSC), polarizing optical microscopy(POM), scannin...     

长侧基甲壳型液晶高分子的合成及性质研究

设计并合成了一系列尾链为不同长度烷氧基的长侧基甲壳型液晶高分子聚[2,5-二(4 ′-烷氧基联苯氧羰基)苯乙烯]( PnCbiPCS,n=4,6,8,10,14).这些聚合物都具有良好的热稳定性.偏光显微镜及一维和二维广角X射线衍射等研究结果表明PnCbiPCS这一系列聚合物均能形成稳定的近晶A相结构,所对应的层间距随...     

Melt‐processable poly(oxyphenylalkanoate): Synthesis,properties, and in vitro degradation of poly(4‐oxyphenylacetate)

The homopolyester of 4‐hydroxyphenylacetic acid (HPAA) was synthesized by one‐pot, slurry‐melt, and acidolysis melt polymerization techniques and was characterized by its inherent viscosity and IR and NMR spectra. Differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) studies of the homopolymer were carried out for its thermal and phase behavior. The results indicated that the yield and molecular weight of the polymer depended on the method of preparation; moreover, the acidolysis melt polymerization of the pure acetoxy derivative of HPAA was the best method for the preparation of high molecular weight poly(4‐oxyphenylacetate) (polyHPAA) without side reactions. DSC and PLM studies also showed that the thermal and optical properties depended largely on the polymerization conditions and inherent viscosity values. PolyHPAA did not show a clear texture typical of liquid‐crystalline polymers, whereas after cooling from the melt, structures similar to spherulitic crystals were observed. WAXD patterns showed a crystalline nature. The in vitro degradability of the polymer was also studied via the water absorption in buffer solutions of pH 7 and 10 at 30 and 60 °C; this was followed by Fourier transform infrared, inherent viscosity, DSC, thermogravimetric analysis, WAXD, and scanning electron microscopy techniques. Unlike Vectra®, which showed no degradation, polyHPAA showed an increase in hydrolytic degradation from 5.0 and 6.0% at 30 °C to 12.5 and 15.0% at 60 °C after 350 h in buffer solutions of pH 7 and 10, respectively. The results indicated a possible biomedical prosthetic application of poly(oxyphenylalkanoate)s such as polyHPAA with better crystallinity coupled with degradability as a substitute for poly(hydroxyalkanoates). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2430–2443, 2001     

Structure-property relationships in polycaprolactone-polyurethanes

The structure-property relationships of polycaprolactone-based segmented polyurethanes were studied using differential scanning calorimetry (DSC), small-angle x-ray scattering (SAXS), wide-angle x-ray diffraction (WAXD), dynamic mechanical, and stress-strain testing. The materials studied varied in hard-segment type [4,4′-diphenylmethane diisocyanate/butanediol (MDI/BD) or 4,4′-dicyclohexyl methane diisocyanate/butanediol (H₁₂MDI/BD)], soft-segment molecular weight (830 or 2000 MW polycaprolactone), hard-segment content (23–77% by weight), and thermal history. The materials with aromatic (MDI/BD) hard segments had semicrystalline hard-segment domains, while the materials with aliphatic (H₁₂MDI/BD) hard segment had mostly amorphous domains. Materials with the shorter polycaprolactone soft segment (830 MW) exhibited thermal and mechanical behavior which indicated a considerable degree of hard- and soft-segment compatibility. The materials which contained a 2000-MW polycaprolactone soft segment exhibited better-defined microphase separation. SAXS was used to characterize the microphase structure of each system. The effects of hard-segment content and soft-segment molecular weight were similar for the aromatic (MDI) and aliphatic (H₁₂MDI) hard-segment-based block copolymers. Changing the hard segment from aromatic to aliphatic gave materials with larger interfacial area and slightly higher tensile strength. A range of morphologies between isolated hard domains in a rubbery matrix and isolated rubbery domains in a hard matrix was observed.     

Polyurethanes containing sulfur. III. New thermoplastic HDI-based segmented polyurethanes with diphenylmethane unit in their structure

Three series of new thermoplastic, high molecular weight, segmented thiopolyurethanes were synthesized by a one-step melt polymerization from newly obtained thiodiols, including bis[4-(2-hydroxyethyl)thiomethylphenyl]methane, bis[4-(3-hydroxypropyl)thiomethylphenyl]methane, and bis[4-(6-hydroxyhexyl)thiomethylphenyl]methane (BHHM), as chain extenders; hexamethylene diisocyanate; and 20–80 mol % poly(oxytetramethylene) glycol (PTMG; number-average molecular weight = 1000) as the soft segment. Solution polymerization with the chain extender BHHM gave considerably lower molecular weight polymers. The structures of all the polyurethanes were determined with Fourier transform infrared and X-ray diffraction analysis. The thermal properties of the polyurethanes were examined with differential scanning calorimetry and thermogravimetric analysis. Shore A/D hardness and tensile properties were also determined. All the polyurethanes showed partially crystalline structures; those obtained with 40–80 mol % PTMG were elastomers. An increase in the PTMG content decreased hardness, modulus of elasticity, and tensile strength, whereas elongation at break increased. BHHM-based polyurethanes obtained in the melt showed the best tensile properties. The polyurethanes exhibited definite glass transitions (−70 to −59 °C) that were nearly independent of the hard-segment content up to about 50 wt % (40–80 mol % PTMG), indicating the existence of mainly microphase-separated soft and hard segments. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1733–1742, 2001     

液晶聚芳醚酮/含甲基苯侧基聚芳醚酮共混体系的环带球晶

本文通过研究含氯侧基液晶聚芳醚酮/含甲基苯侧基聚芳醚酮共混体系(结晶/非晶)环带球晶的形态演变和发展过程; 利用选择性溶剂刻蚀方法确定共混体系环带球晶的相组成和相结构, 探讨了环带球晶的形成机理.     

Synthesis of novel multi-arm star azobenzene side-chain liquid crystalline copolymers with a hyperbranched core

A series of novel multi-arm star side-chain liquid crystalline (LC) copolymers with hyperbranched core moieties were synthesized by atom transfer radical polymerization (ATRP) using a multi-functional hyperbranched polyether as the initiator and chlorobenzene as the solvent. The multi-functional hyperbranched polyether initiator was prepared from poly(3-ethyl-3-(hydroxymethyl)oxetane) (PEHO) and 2-bromo-2-methylpropionyl bromide. The azobenzene side-chain liquid crystalline arms were designed to have an LC conformation of poly[6-(4-methoxy-4^′-oxy-azobenzene)hexyl methacrylate] with different molecular weights. Their characterization was performed with ¹H NMR, size exclusion chromatograph (SEC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The multi-arm star side-chain liquid crystalline copolymers exhibited a smectic and a nematic phase, and the phase transition temperatures from the smectic to the nematic phase and from the nematic to isotropic phase increased with increasing the molecular weight of the multi-arm star side-chain liquid crystalline copolymers from 1.78 × 10⁴ to 9.07 × 10⁴.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

Monotropic smectic A to double layer smectic C transition of biphenyl containing liquid crystal acetylene

5-[（4’-Heptoxy-4-biphenylyl）carbonyloxy]-1-pentyne（A-3,7） was synthesized and the phase structures and transitions were investigated by differential scanning calorimetry（DSC）,wide angle X-ray diffraction（WAXD）,polarized light microscopy（PLM） and the molecular packing in the crystal and liquid crystalline phases were simulated by molecular dynamic simulation.The results showed that the sample formed thermodynamically metastable SmA and SmC₂ phases before crystallized during cooling and the crystal phase directly transformed into isotropic phase during heating.     

引入PNA、1, 2-PG对聚氨酯胶粘剂微相形态及性能的影响

引入PNA、1; 2-PG对聚氨酯胶粘剂微相形态及性能的影响;聚氨酯胶粘剂;结晶;微相分离;软段;硬段     

Hard-segment polymorphism in MDI/diol-based polyurethane elastomers

X-ray analyses of methylene-bis(4)phenyl isocynate(MDI)/diol/poly(tetramethylene adipate) polyurethane elastomers prepared using hexanediol (HDO), butanediol (BDO), and propanediol (PDO) point to the development of a second crystalline structure in the hard segments as a result of thermal elongation and annealing. The HDO polymer crystallizes initially in the fully extended conformation, but a second crystal structure, a contracted form, develops with stretching and annealing at 130°C. In contrast, the BDO and PDO polymers crystallize initially in contracted conformation, but fully extended forms develop as a result of elongation and annealing. Only a contracted conformation has been seen so far in hard segments prepared using ethylene glycol (EDO) as the chain extender. These results correlate very well with DSC data for the same polymers. The development of the new crystal structures is accompanied by the appearance of new hard-segment melting peaks in the DSC traces. For the HDO polymer, the new peak for the contracted form appears at a higher temperature than that for the original extended form; for the BDO and PDO polymers the new peaks for the extended forms appear at lower temperatures than those for the contracted forms. Only a single peak is seen for the EDO polymer, for which only one crystal structure has been detected for the hard segments. These results indicate that the development of polymorphic crystal structures must be taken into account in interpreting the multiple melting phenomena seen for the hard domains in polyurethane elastomers.     

Phase structures of a hydrated anionic phospholipid composition containing cationic dendrimers and pegylated lipids

The effect of 4th generation poly(amidoamine) dendrimer (4G PAMAM) present in an anionic phospholipid composition, consisting of hydrogenated soyphosphatidylcholine (HSPC), cholesterol (CH), dicetyl phosphate (DCP), and poly(ethylene glycol) (Mw approximately 2000) derivatized phosphatidylethanolamine (PEG2000-PE), on the hydration and liquid crystalline structure formation was investigated. The optical and polarized light microscopies of the liposomal dispersion obtained from the hydrated lipid composition show two types of birefringent structures (mesophases): plastic, wormlike microstructures and conventional, over-elongated lamellae. Differential scanning calorimetry (DSC) shows an increase in the liquid crystalline phase transition (Tg) of the lipid composition from 60 to 94 degrees C with increasing 4G PAMAM concentrations from 0 to 0.011 mM, respectively. The Tg values of the two microstructures were 68 and 84 degrees C, respectively, indicating that the plastic microstructures were 4G PAMAM/DCP-complexes-rich (alpha mesophases) and the conventional and elongated lamellae were dendrimer-doped HSPC/CH-rich microstructures (beta mesophases). Optical microscopy shows that the alpha mesophases convert into various other types of vesicular structures such as giant unilamellar vesicles and biliquid foams, upon heating above the phase transition temperature of the lipid composition (approximately 60-65 degrees C). The microstructure transformation is a result of an osmotic influx of water and the detergent action of PEG2000-PE present in the lipid composition. The transmission electron microscopy (TEM) images of the liposomal dispersion show particles embedding circular transparent domains that exactly correlate to the theoretical 4G PAMAM/DCP complex sizes, thus, providing evidence of 4G PAMAM interspersed within the two mesophases. Small-angle X-ray scattering (SAXS) measurements indicate that the alpha mesophases are a dendrimer-interlinked, symmetrically undulated lamellar phase and the beta mesophases are dendrimer-doped, occasionally kinked lamellae. An increase in dendrimer concentration in the lipid composition was found to decrease interlamellar spacing. On the basis of optical microscopy, DSC, TEM, and SAXS data, a model of dendrimer-doped mesophase structure and lamellae fusion is proposed. This investigation provides new self-assembled materials for drug/gene delivery and supplements the understanding of mechanisms involved in various biological processes such as membrane fusion, transmembrane permeation, and endocytosis.     

Annealing effects on the thermal properties of liquid crystalline polyurethanes

This work is a continuation of our earlier investigations of liquid crystalline polyurethanes prepared from 4,4′-bis(2-hydroxyethoxy) biphenyl (BHBP), 2,4-tolylene diisocyanate (TDI), and poly (oxytetramethylene) diols (PTMO). The annealing effects on the thermal properties of the investigation polyurethanes are presented for three samples with the same BHBP content, different flexible spacer length, and different molecular weight of the polyurethanes. The annealed polyurethanes were investigated by means of DSC, and polarizing microscopy. The results of the thermal analysis show that the temperatures of phase transitions depend on the annealing temperature and time. These dependences are different for different molecular weights. © 1994 John Wiley & Sons, Inc.     

A Novel Solid-Solid Phase Change Material Based on Poly(styrene-co-acrylonitrile) Grafting With Palmitic Acid Copolymers

(SAN-g-PA) as new solid-solid phase change materials (SSPCMs) were synthesized starting from poly(styrene-co- acrylonitrile) (SAN) and palmitic acid (PA). The chemical structure of the synthesized SAN-g-PA were characterized with Fourier transform infrared (FTIR), and Nuclear Magnetic Resonance (¹H-NMR), their thermal energy storage properties and thermal stability were investigated with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Moreover, the crystalline morphology and crystal structures were also measured with polarized optical microscopy (POM) and X-Ray Diffraction (XRD). The result shows that the PA molecule was grafted onto the SAN, SAN-g-PA were obtained successfully. The crystalline morphology and crystal structures of the synthesized SAN-g-PA are different from palmitic acid and SAN. As novel SSPCMs, SAN-g-PA possess suitable phase transition temperature, the higher enthalpy value, and good heat stability.     

Perforated layer structures in liquid crystalline rod-coil block copolymers

We report a novel observation of the tetragonal perforated layer structures in a series of rod-coil liquid crystalline block copolymers (BCPs), poly(styrene-block-(2,5-bis[4-methoxyphenyl]oxycarbonyl)styrene) (PS-b-PMPCS). PMPCS forms rigid rods while PS forms the coil block. Differential scanning calorimetry (DSC), polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), wide-angle X-ray diffraction (WAXD), and transmission electron microscopy (TEM) techniques were used to investigate these rod-coil molecules, and a perforated layer structure was observed at f(PMPCS) approximately 0.37 in relatively low molecular weight (M(w)) samples and approximately 0.5 in high M(w) PS-b-PMPCS. This substantial phase boundary shift was attributed to the rod-coil nature of the BCP. The perforation obeys a tetragonal instead of hexagonal symmetry. The "onset" of perforation was also observed in real space in sample PS(272)-b-PMPCS(93) (f(PMPCS) approximately 0.52), in which few PS chains punctuate PMPCS layers. A slight increase in f(PS), by blending with PS homopolymer, led to a dramatic change in the BCP morphology, and uniform tetragonal perforations were observed at f(PMPCS) approximately 0.48.     

Phase diagrams and morphology of polymer-dispersed liquid crystals: An analysis

Thermal and morphological studies of polymer-dispersed liquid crystals (PDLCs) for various compositions of liquid crystalline material 4-undecyloxybenzoic acid (UDBA) in two polymer matrices, polyvinylidenefluoride-co-hexafluoropropylene P(VdF–HFP) or polyethylene oxide (PEO), have been carried out using differential scanning calorimetry (DSC) and polarising optical microscopy (POM). Phase diagrams for different series of PDLCs have been analysed using the Flory–Huggins theory of isotropic mixing and the Maier–Saupe–McMillan theory, to include the anisotropic contributions. Mesogenic transitions of UDBA are observed to be greatly influenced when dispersed in these polymers. The morphologies and miscibility studies of these PDLCs suggest that UDBA is highly miscible in PEO, only partially miscible in poly(methyl methacrylate) (PMMA), but almost immiscible in P(VdF–HFP).     

Design,synthesis, and characterisation of symmetrical bent-core liquid crystalline dimers with diacetylene spacer

Two new symmetrical bent-core liquid crystalline dimers (B-DA4 and B-DA12) bearing diacetylenes spacer and different terminal alkyl chains were successfully synthesised via Sonagashira coupling reaction. The molecular structures of these dimers were confirmed by ¹H nuclear magnetic resonance (NMR), Fourier transform-infrared spectroscopy (FT-IR), Raman spectroscopy, mass spectrometry, and elemental analysis. Their thermal stability and liquid crystalline properties were characterised by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarised light microscopy (PLM), and small-angle X-ray scattering (SAXS). Results showed that the diacetylene group may be thermal polymerised at about 260°C far from thermal decomposition. The dimers exhibited monotropic phase behaviour and typical layered-structure phase with long-range order on a length scale of about 6.3 nm was observed. The results mentioned above offer a promising opportunity to design polydiacetylene nanowires by thermal, UV irradiation, or scanning tunnelling microscope (STM) tip-induced polymerisation.     

Miscibility of semirigid thermotropic liquid crystalline polycarbonate with poly(vinyl chloride)

Miscibility and morphology of polymer blends of semirigid thermotropic liquid crystalline (LC) polycarbonate (LCPC) with three commercial amorphous poly(vinyl chloride)s (PVC) having various molecular weights were investigated by means of differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). No phase separation was observed in the LCPC/PVC polymer blends. LCPC forms miscible polymer blends with the PVCs independent of molecular weight. The dynamic storage modulus of the LCPC/PVC polymer blends changes systematically with blend composition.