Self-organization effect in poly（3-hexylthiophene）： methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.     

Effect of magnetic field on the spin-Peierls transition in single-crystal CuGeO

This paper reports that high quality CuGeO3 single crystals were successfully grown by floating-zone technique and the magnetic property was studied. The temperature dependence of magnetic susceptibility below the spin-Peierls （SP） transition temperature （Tsp） under magnetic fields applying along both the a- and c-axis direction can be fitted well by a model of noninteracting dimmers. The spin gap derived from the fitting is consistent with other reports. There is a very weak anisotropy in the fitting parameters for different directions, which should be expected from a SP system. A small upturn in susceptibility at low temperature due to paramagnetic impurities and/or defects can be observed. A suppression of the upturn by magnetic field is first discovered in this system and the possible origins for this suppression are discussed.     

Superconductivity without dependence on valenceelectron density in Zn doped YBCO systems

This paper reports that the YBa2Cu3-xZnxO7-δ （x = 0-0.4） samples are researched by means of x-ray diffraction, calculations of binding energy, the positron experiments and variations of oxygen content. The results of simulated calculations, positron experiments and variations of oxygen content support the existence of cluster effect. Moreover, it is concluded that the cluster effect is an important factor on suppression of high-Tc cuprate superconductivity and the Tc does not depend on the density of valence electron directly.     

Compact efficient optical parametric generator internal to a Q-switched Nd:YVO4 laser with periodically poled MgO:LiNbO3

This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVOquasi-phase-matching, intracavity optical parametric generator, periodically poled MgO-doped lithium niobate (PPMgLN)Project supported by the National Natural Science Foundation of China (Grant Nos 10474071 and 60671036).4265K, 4260F, 4270This paper demonstrates a compact efficient optical parametric generator internal to a Q-switched diode-end-pumped Nd:YVO$_{4}$ laser with periodically poled MgO:LiNbO₃(PPMgLN). With the Q-switch set at a repetition rate of 25kHz and the PPMgLN crystal operated at room temperature (25\du\,), the intracavity optical parametric generator threshold was reached as a diode pump power of 0.9\,W. A maximum signal output power of 0.34W with a pulse width of 25\,ns and a beam quality factor of 1.4 was obtained at an incident diode power of 3.4\,W, leading to a conversion efficiency of 10{\%} with a slope efficiency of 14.4{\%}. By varying the crystal temperature from 25 to 200\du, the output signal wavelengths were tuned in range of 1506--1565\,nm. Over a 30-minutes interval, the instability of the signal power was measured to be less than 1{\%}. In addition, the threshold pump intensity for the intracavity optical parametric generator is theoretically investigated, and the obtained result is in good agreement with the experimental results.     

Theoretical investigation on near-infrared and visible absorption spectra of nanometallic aluminium with oxide coating in nanoenergetic materials: size and shape effects

The effects of metal core dimension, oxide shell thickness and ellipsoid aspect ratio of Al-Al2O3 core-shell nanoparticles on the near-infrared and visible absorption spectra of nanocomposite Al-Al2O3/nitrocellulose（NC） film are investigated by numerical calculations. Both the size-dependent interband transitions and frequency-dependent free electron damping of the nanometallic aluminium are taken into account in the calculations. Oxidation effect of nanoaluminium is also analysed. It is shown that oxidation may enhance but may also reduce the optical absorption, depending on the excited light energy and initial dimension of nanoparticle. Metal core size and excited light energy dominate the absorption characteristic. The absorption ability of ellipsoidal nanoparticles is larger than that of spheroidal nanoparticles and increases by the square index as the aspect ratio increases. These calculations will provide some significant theoretical guidance for the preparation and laser ignition of nanoenergetic materials.     

Coalescence of heteroclusters Au767 and Ag767: a molecular-dynamics study

This paper studies the coalescence of heteroclusters Au767 and Ag767 by using molecular dynamics with the embedded atom method, where layer atomic energy is employed to describe the potential energy variation of per atom in different layers along radial direction. The results show that the coalescence is driven by releasing the atomic energy of the coalesced zone. The deformation, which is induced by substitutional and vacancy diffusion during the coalescence, makes the coalesced cluster disorder. If the summation of the thermal energy and the released atomic energy is large enough to keep the disorder state, the clusters form a metastable liquid droplet; otherwise, the clusters coalesce into a solid cluster when the coalesced cluster reaches the equilibrium state, and the coalesced cluster experiences liquid to solid ordering changes during the coalescence of a solid Au767 with a liquid Ag767 and a liquid Au767 with a liquid Ag767. The centre of figure of the cluster system is shifted during the coalescence process, and higher coalescence temperature causes larger shift degree.     

Re-research on the size of proto-neutron star in core-collapse supernova

The electron capture timescale may be shorter than hydrodynamic timescale in inner iron core of core-collapse supernova according to a recent new idea. Based on the new idea, this paper carries out a numerical simulation on supernova explosion for the progenitor model Ws15M. The numerical result shows that the size of proto-neutron star has a significant change （decrease about 20%）, which may affects the propagation of the shock wave and the final explosion energy.     

Molecular dynamics of MgSiO3 perovskite melting

The melting curve of MgSiO分子动力学 MgSiO3钙钛矿 熔化温度 高压melting temperature, molecular dynamics, high pressureProject supported by the National Natural Science Foundation of China (Grant Nos 10274055 and 10376021),the Natural Science Foundation of Gansu Province, China (Grant No 3ZS051-A25-027) and the Scientific Research Foundation of Education Bureau of Gansu Province, China (Grant No 0410-01).2005-01-125/8/2005 12:00:00 AMThe melting curve of MgSiO3 perovskite is simulated using molecular dynamics simulations method at high pressure. It is shown that the simulated equation of state of MgSiO3 perovskite is very successful in reproducing accurately the experimental data. The pressure dependence of the simulated melting temperature of MgSiO3 perovskite reproduces the stability of the orthorhombic perovskite phase up to high pressure of 130GPa at ambient temperature, consistent with the theoretical data of the other calculations. It is shown that its transformation to the cubic phase and melting at high pressure and high temperature are in agreement with recent experiments.     

Single crystalline boron carbide nanobelts: synthesis and characterization

This paper reports that the large-scale single crystalline boron carbide nanobelts have been fabricated through a simple carbothermal reduction method with B/B2O3/C/Fe powder as precursors at 1100℃. Transmission electron microscopy and selected area electron diffraction characterizations show that the boron carbide nanobelt has a B4C rhomb-centred hexagonal structure with good crystallization. Electron energy loss spectroscopy analysis indicates that the nanobelt contains only B and C, and the atomic ratio of B to C is close to 4：1. High resolution transmission electron microscopy results show that the preferential growth direction of the nanobelt is [101]. A possible growth mechanism is also discussed.     

Effects of exchange interaction and spin-fluctuation on the magnetic and magneto-optic properties of NdF3

The exchange interaction between the electrons in the different magnetic ions and the spin-fluctuation of the magnetic ions exist in the paramagnetic media NdF3. The exchange interaction between the electrons in the different magnetic ions may be equivalent to an effective field Hin that is in direct proportion to the magnetization M. The spin-fluctuation of the magnetic ions leads the coefficient of the effective field to vary with temperature. The effective field is given as Hin = -（0.75 ＋ 0.22T） × 10^-5M in NdF3. When the secondary crystal field effect is taken into account, the magnetic susceptibility and Verdet constant are calculated for NdF3 by means of the effective field Hin and the applied field He. The calculated results are in agreement with the measured ones.     

Deceleration of a continuous-wave （CW） molecular beam with a single quasi-CW semi-Gaussian laser beam

We propose a promising scheme to decelerate a CW molecular beam by using a red-detuned quasi-cw semi-Gaussian laser beam （SGB）. We study the dynamical process of the deceleration for a CW deuterated ammonia （ND3） molecular beam by Monte-Carlo simulation method. Our study shows that we can obtain a ND3 molecular beam with a relative average kinetic energy loss of about 10% and a relative output molecular number of more than 90% by using a single quasi-cw SGB with a power of 1.5kW and a maximum optical well depth of 7.33mK.     

Semiclassical calculation of Rydberg He2^＋ molecular of recurrence spectra ion in a magnetic field

Making use of the molecular closed-orbit theory and a new model potential for the Rydberg molecule, we have calculated the recurrence spectra of He^2＋ molecular ion in a magnetic field for different quantum defects. The Fourier transform spectra of He^2＋ molecular ion may be used to perform a direct comparison between peaks in the spectra and the scaled action values of closed orbits of the excited electron in external fields. We find that the spectral modulations can be analysed in terms of the scattering of the excited electron on the molecular core. Unlike the case of the Rydberg atom where the elastic scattering is predominant, modulations produced by inelastic scattering are also vital to the photoabsorption spectrum of the Rydberg molecule. Our results are in good agreement with the quantum results, which suggests that our method is correct.     

Effect of Dy substitution on magnetic properties and magnetocaloric effects of Tb6Co1.67Si3 compounds

The magnetic and magnetocaloric properties of(Tb1-xDyx) 6 Co 1.67 Si 3(0 ≤ x ≤ 0.8) have been experimentally investigated.The compounds exhibit a Ce6Ni2Si3-type hexagonal structure and undergo a second-order magnetic transition.The Curie temperature decreases from ～ 187 K to 142 K as the content of Dy grows from 0 to 0.8.The maximal magnetic entropy change,for a field change of 0-5 T,varies between ～ 6.2 and ～ 7.4 J/kg.K,slightly decreasing when Dy is introduced.The substitution of Dy leads to a remarkable increase in refrigeration capacity(RC).A large RC value of ～ 626 J/kg is achieved for x = 0.4 under a field change of 0-5 T.     

Spontaneous magnetization and resistivity jumps in bilayered manganite （La0.8Eu0.2）4/3Sr5/3Mn2O7 single crystals

Owing to the inhomogeneous state resulting from the doping of a small number of Eu ions into Laa/3Sr5/3Mn2O7, from the resulting single crystal （La0.8Eu0.2）a/3Sr5/3Mn2O7 we have observed the magnetization jump, the resistivity jump, as well as the relaxation phenomena. For （Lao.sEuo.2）a/3Sr5/3Mn2O7, it has a very delicate ground state due to the interplays among spin, charge, orbital, lattice degrees of freedom. Consequently, the magnetization state is sensitive to temperature, magnetic field, as well as time. Meanwhile, the evolution of the magnetization with time shows a spontaneous jump when both the temperature and the magnetic field are constant. Similar step-like behaviours are also observed in resistivity. All these results suggest that Eu doping can greatly modulate the physical properties of Laa/3Sr5/3Mn2O7 and cause such interesting behaviours.     

Extraction of optical constants and thickness of nanometre scale TiO2 film

TiOTiO2 薄膜 沉积物 磁电管喷射系统 X射线 发射光谱TiO₂ thin films, pointwise constrained optimization approach, constrained nonlinear programming, optical constants, parameters extractionProject supported by Shanghai Municipal Commission for Science and Technology (Grant No 03DZ14025) and National Basic Research Program of China (Grant No 2006CB300406).3/4/2005 12:00:00 AM2005-03-042005-07-28TiO2 thin films were deposited on glass substrates by sputtering in a conventional rf magnetron sputtering system. X-ray diffraction pattern and transmission spectrum were measured. The curves of refraction index and extinction coefficient distributions as well as the thickness of films calculated from transmission spectrum were obtained. The optimization problem was also solved using a method based on a constrained nonlinear programming algorithm.     

Electron spin resonance study of the Ba-doping manganite Nd0.5Sr0.5MnO3

We have performed magnetization measurements and electron spin resonance （ESR） on polycrystalline manganites of Nd0.5Sr0.5-xBaxMnO3 （x = 0.1）. Phase separation and phase transitions are observed from the susceptibility and the ESR spectra data. Between 260 K （～ Tc） and 185 K （～ TN）, the system coexists of the paramagnetic phase and the ferromagnetic （FM） phase. Between 185 K and 140 K, the system coexists of the FM phase and the antiferromagnetic （AFM） phase. These results indicate that the system has a very complex magnetic state due to the origin of the instability stemming from manganite Nd0.5Sr0.4Ba0.1MnO3 by partially substituting the larger Ba^2＋ ions for the smaller Sr^2＋ ions.     

First-principles investigation of BAs and BxGa1-xAs alloys

First-principles investigation of BAs and BxGa1-xAs alloys Using first-principles calculations in the generalized gradient approximation, the electronic properties of BAs and BxGa1-xAs alloys are studied. At the Brillouin-zone centre, the lowest conduction band is the three-degenerate p-like Г15c state rather than s-like Г1c state, and the conduction band minimum （CBM） is along the A line between the Г and X points-at approximately 11/14（1,0,0）2π/a. With boron content at 0%-18.75%, BxGa1-xAs alloys have a small （2.6 eV） and relatively composition-independent band-gap bowing parameter, the band-gap increases monotonically by -18meV/B% with increasing boron content. In addition, the formation enthalpies of mixing for BxGa1-xAs alloys with boron content at 6.25% and 12.5% are calculated, and the large formation enthalpies may explain the difficulty in alloying boron to GaAs.     

First-principles study of interphase Ni3Sn in Sn--Ni alloy for anode of lithium ion battery

This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, it is found that the Ni3Sn has larger relative expansion ratio and lower electrochemical potential, with its specific plateaus voltage around 0.3 eV when lithium atoms are filled in all octahedral interstitial sites, and the relative expansion ratio increasing dramatically when the lithiated phase transits from octahedral interstitial sites to tetrahedral interstitial sites. So this phase is a devastating phase for whole alloy electrode materials.     

Preparation and luminescence characteristics of Eu^2＋ activated silicate phosphor

This paper synthesizes the Sr2SiO4：Eu^2＋ phosphor by high temperature solid-state reaction. The emission spectrum of Sr2SiO4 ： Eu^2＋ shows two bands centred at 480 and 547 nm, which agree well with the calculation values of emission spectrum, and the location of yellow emission of Sr2SiO4 ： Eu^2＋ is influenced by the Eu^2＋ concentration. The excitation spectrum for 547 nm emission has two bands at 363 and 402 nm. The emission spectrum of white light emitting diodes （w-LEDs） based on Sr2SiO4 ： Eu^2＋ phosphor ＋ InGaN LED was investigated.